sftp(1) User Commands sftp(1)NAMEsftp - secure file transfer program
SYNOPSISsftp [-1Cv] [-B buffer_size] [-b batchfile] [-F ssh_config]
[-o ssh_option] [-P sftp_server_path] [-R num_requests]
[-S program] [-s subsystem | sftp_server] host
sftp [[user@]host[:file [file]]]
sftp [[user@]host[:dir[/]]]
sftp-b batchfile [user@]host
DESCRIPTION
The sftp utility is an interactive file transfer program with a user
interface similar to ftp(1) that uses the ssh(1) command to create a
secure connection to the server.
sftp implements the SSH File Transfer Protocol as defined in IETF
draft-ietf-secsh-filexfer. There is no relationship between the proto‐
col used by sftp and the FTP protocol (RFC 959) provided by ftp(1).
The first usage format causes sftp to connect to the specified host and
enter an interactive mode. If a username was provided then sftp tries
to log in as the specified user. If a directory is provided then sftp
tries to change the current directory on the server to the specified
directory before entering the interactive mode.
The second usage format retrieves the specified file from the server
and copies it to the specified target file or directory on the client.
If a username is specified sftp tries to log in as the specified user.
OPTIONS
The following options are supported:
-b batchfile
Batch mode reads a series of commands from an input batchfile
instead of stdin. Since it lacks user interaction, it should be
used in conjunction with non-interactive authentication. A batch‐
file of - can be used to indicate standard input. sftp aborts if
any of the following commands fail: get, put, rm, rename, ln, rm,
mkdir, chdir, ls, lchdir, chmod, chown, chgrp, lpwd, and lmkdir.
Termination on error can be suppressed on a command by command
basis by prefixing the command with a - character (for example, -rm
/tmp/blah*).
-B buffer_size
Specifies the size of the buffer that sftp uses when transferring
files. Larger buffers require fewer round trips at the cost of
higher memory consumption. The default is 32768 bytes.
-C
Enables compression, using the -C flag in ssh(1).
-F ssh_config
Specifies an alternative per-user configuration file for ssh. This
option is directly passed to ssh(1).
-o ssh_option
Specifies an option to be directly passed to ssh(1).
-P sftp_server path
Executes the specified path as an sftp-server and uses a pipe,
rather than an ssh connection, to communicate with it. This option
can be useful in debugging the sftp client and server. When the -P
is specified, the -S option is ignored.
-R num_requests
Specifies how many requests can be outstanding at any one time.
Increasing this can slightly improve file transfer speed but
increases memory usage. The default is 64 outstanding requests.
-s subsystem | sftp_server
Specifies the SSH2 subsystem or the path for an sftp server on the
remote host. A path is useful for using sftp over protocol version
1, or when the remote sshd does not have an sftp subsystem config‐
ured.
-S ssh_program path
Uses the specified program instead of ssh(1) to connect to the sftp
server. When the -P option is specified, the -S option is ignored.
The program must understand ssh(1) options.
-v
Raises logging level. This option is also passed to ssh(1).
-1
Specifies the use of protocol version 1.
OPERANDS
The following operands are supported:
hostname | user@hostname
The name of the host to which sftp connects and logs into.
INTERACTIVE COMMANDS
Once in interactive mode, sftp understands a set of commands similar to
those of ftp(1). Commands are case insensitive and path names can be
enclosed in quotes if they contain spaces.
bye
Quits sftp.
cd path
Changes remote directory to path.
chgrp grp path
Changes group of file path to grp. grp must be a numeric GID.
chmod mode path
Changes permissions of file path to mode.
chown own path
Changes owner of file path to own. own must be a numeric UID.
exit
Quits sftp.
get [flags] remote-path [local-path]
Retrieves the remote-path and stores it on the local machine. If
the local path name is not specified, it is specified the same name
it has on the remote machine. If the -P flag is specified, then the
file's full permission and access time are copied too.
help
Displays help text.
Identical to the ? command.
lcd path
Changes local directory to path.
lls [ls-options [path]]
Displays local directory listing of either path or current direc‐
tory if path is not specified.
lmkdir path
Creates local directory specified by path.
ln oldpath newpath
Creates a link from oldpath to newpath.
lpwd
Prints local working directory.
ls [-1aflnrSt] [path]
Displays remote directory listing of either path or current direc‐
tory if path is not specified. path can contain wildcards.
The ls supports the following options:
-a
Lists files beginning with a dot (.).
-f
Does not sort the listing. The default sort order is lexico‐
graphical.
-l
Displays additional details including permissions and ownership
information.
-n
Produces a long listing with user and group information pre‐
sented numerically.
-r
Reverses the sort order of the listing.
-S
Sorts the listing by file size.
-t
Sorts the listing by last modification time.
-1
Produces single column output.
lumask umask
Sets local umask to umask.
mkdir path
Creates remote directory specified by path.
put [flags] local-path [local-path]
Uploads local-path and stores it on the remote machine. If the
remote path name is not specified, it is specified the same name it
has on the local machine. If the -P flag is specified, then the
file's full permission and access time are copied too.
pwd
Displays remote working directory.
quit
Quits sftp.
rename oldpath newpath
Renames remote file from oldpath to newpath.
rm path
Deletes remote file specified by path.
rmdir path
Removes remote directory specified by path.
symlink oldpath newpath
Creates a symbolic link from oldpath to newpath.
version
Displays the sftp protocol version.
# [comment]
Include a comment. This is useful in batch files.
! [command]
If command is not specified, escapes to the local shell.
If command is specified, executes command in the local shell.
?
Displays help text.
Identical to the help command.
EXIT STATUS
The following exit values are returned:
0
Successful completion.
>0
An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │network/ssh │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Committed │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOftp(1), scp(1), ssh(1), ssh-add(1), ssh-keygen(1), sshd(1M),
attributes(5)SunOS 5.10 7 Aug 2012 sftp(1)
