set(1m)set(1m)NAMEset - Modifies characteristics for the DTS entity.
SYNOPSIS
dtscp set characteristic
ARGUMENTS
The name and value of one or more characteristics to be modified.
Valid values for characteristic are described in the following list.
These values are described in more detail in the description section.
check interval [relative-time] courier role [role] error tolerance
[relative-time] global set timeout [relative-time] local set timeout
[relative-time] maximum inaccuracy [relative-time] query attempts
[integer] server entry name [name] server group name [name] server
principal name [name] servers required [integer] synchronization hold
down [relative-time]
DESCRIPTION
The set command modifies the charactistics you specify for the DTS
entity. The modifiable characteristics and their values are described
in the following list.
Specifies the amount of time between checks for faulty servers. Appli‐
cable only for servers that have external time providers.
Default: 0-01:30:00.000 Value: 0-00:00:30.000 - 10675199-02:48:05.000
Specifies a server's interaction with the set of global servers.
Default: backup courier
The following values are valid: The local server becomes a courier if
none are available on the LAN. The local server synchronizes with the
global set of servers. The local server does not synchronize with the
global set of servers.
Specifies the maximum separation allowed between the local clock and
the computed time before synchronizations become abrupt rather than
gradual (monotonic).
Default: 0-00:10:00.000 Value: 0-00:00:00.500 - 10675199-02:48:05.000
Specifies the amount of time the node waits for a response to a global
synchronization request before sending another request or declaring a
global server to be unavailable. The number of attempts made to reach
the server is controlled by the query attemps characteristic.
Default: 0-00:00:15.000 Value: 0-00:00:00.000 - 0-00:10:00.000
Specifies the amount of time the node waits for a response to a local
synchronization request before sending another request or declaring a
server to be unavailable. The number of attempts made to reach the
server is controlled by the query attemps characteristic.
Note that the local set timeout value controls only the initial contact
with a time provider. During this initial contact, the time provider
itself determines the timeout value for actually reporting back times.
This allows a time provider attached to a slow source like a modem to
request that dtsd wait for a longer interval.
Default: 0-00:00:05.000 Value: 0-00:00:00.000 - 0-00:01:00.000
Specifies the inaccuracy limit for the node. When the node exceeds the
maximum inaccuracy setting, it attempts to synchronize.
Default: 0-00:00:00.100 Value: 0-00:00:00.000 - 10675199-02:48:05.000
Specifies the number of attempts that a node makes to contact a server
before the node considers the server unavailable.
Default: 3 Value: 1-10
Specifies a server's CDS entry name; hostname represents the name of
the system or node that is the server's client. The default setting is
the recommended value.
Default: /.:/hosts/hostname/dts-entity
Specifies the name of the security group that DTS uses for authentica‐
tion checks. DTS clerks and servers do not accept time values from DTS
servers that are not included in this group.
Specifies a server's principal name for authentication purposes; host‐
name represents the name of the system or node that is the server's
client. The default setting is the recommended value.
Default: /.:/hosts/hostname/self
Specifies the minimum number of servers required for a synchronization.
Settings of 1 or 2 may cause unreliable computed times.
Default: 1 (clerks) 3 (servers) Value: 1-10
Specifies the interval a node must wait to synchronize. Also specifies
synchronization frequency when a node reaches the value specified by
the maximum inaccuracy characteristic.
Clerks: Default: 0-00:10:00.000 Value: 0-00:00:30.000 - 01-00:00:00.000
Servers: Default: 0-00:02:00.000 Value: 0-00:00:30.000 -
01-00:00:00.000
Privilege Required
You must have write permission on the ACL associated with the DTS
entity in order to execute the command.
NOTES
This command is replaced at Revision 1.1 by the dcecp command and may
not be provided in future releases of DCE.
The following two commands are obsolete. Use the replacements shown.
This command is the same as set local set timeout. This command is the
same as set global set timeout.
EXAMPLES
The following example command sets the check interval characteristic to
30 seconds:
dtscp> set check interval 00-00:00:30.000 The following example shows
how to set the number of servers required before the entity can syn‐
chronize:
dtscp> set servers required 4 The following example shows how to set
the courier role for a server:
dtscp> set courier role backup courier The following example command
sets the error tolerance characteristic to seven minutes:
dtscp> set error tolerance 0-00:07:00.000 The following example command
the global set timeout characteristic to 45 seconds:
dtscp> set global set timeout 0-00:00:45.000 The following example com‐
mand the local set timeout characteristic to five seconds:
dtscp> set local set timeout 0-00:00:05.000 The following example com‐
mand sets the maximum inaccuracy characteristic to three milliseconds:
dtscp> set maximum inaccuracy 0-00:00:00.300 The following example com‐
mand sets the server entry name characteristic to /.:/hosts/orion/dts-
entity:
dtscp> set server entry name /.:/hosts/orion/dts-entity The following
example command sets the server principal name characteristic to
/.:/hosts/vega/dts-entity:
dtscp> set server principal name /.:/hosts/vega/dts-entity The follow‐
ing example command sets the synchronization hold down characteristic
to 15 minutes:
dtscp> set synchronization hold down 0-00:15:00.000
RELATED INFORMATION
Commands: show (1m)
set(1m)