qblog.h(3) libqb qblog.h(3)NAMEqblog.h-
The logging API provides four main parts (basics, filtering, threading
& blackbox).
SYNOPSIS
#include <stdint.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdarg.h>
#include <errno.h>
#include <syslog.h>
#include <string.h>
#include <qb/qbutil.h>
#include <qb/qbconfig.h>
Data Structures
struct qb_log_callsite
An instance of this structure is created in a special ELF section
at every dynamic debug callsite.
Defines
#define LOG_TRACE (LOG_DEBUG + 1)
#define QB_LOG_MAX_LEN 512
#define QB_LOG_STRERROR_MAX_LEN 128
#define QB_LOG_INIT_DATA(name)
#define QB_LOG_TAG_LIBQB_MSG_BIT 31
#define QB_LOG_TAG_LIBQB_MSG (1 << QB_LOG_TAG_LIBQB_MSG_BIT)
#define qb_logt(priority, tags, fmt, args...)
This is the function to generate a log message if you want to
manually add tags.
#define qb_log(priority, fmt, args...) qb_logt(priority, 0, fmt,
##args)
This is the main function to generate a log message.
#define qb_perror(priority, fmt, args...)
This is similar to perror except it goes into the logging system.
#define qb_enter() qb_log(LOG_TRACE, 'ENTERING %s()', __func__)
#define qb_leave() qb_log(LOG_TRACE, 'LEAVING %s()', __func__)
#define QB_LOG_SYSLOG 0
#define QB_LOG_STDERR 1
#define QB_LOG_BLACKBOX 2
#define QB_LOG_STDOUT 3
#define QB_LOG_TARGET_MAX 32
Typedefs
typedef const char *(* qb_log_tags_stringify_fn )(uint32_t tags)
typedef void(* qb_log_filter_fn )(struct qb_log_callsite *cs)
typedef void(* qb_log_logger_fn )(int32_t t, struct qb_log_callsite
*cs, time_t timestamp, const char *msg)
typedef void(* qb_log_vlogger_fn )(int32_t t, struct qb_log_callsite
*cs, time_t timestamp, va_list ap)
typedef void(* qb_log_close_fn )(int32_t t)
typedef void(* qb_log_reload_fn )(int32_t t)
Enumerations
enum qb_log_target_state { QB_LOG_STATE_UNUSED = 1,
QB_LOG_STATE_DISABLED = 2, QB_LOG_STATE_ENABLED = 3 }
enum qb_log_conf { QB_LOG_CONF_ENABLED, QB_LOG_CONF_FACILITY,
QB_LOG_CONF_DEBUG, QB_LOG_CONF_SIZE, QB_LOG_CONF_THREADED,
QB_LOG_CONF_PRIORITY_BUMP, QB_LOG_CONF_STATE_GET,
QB_LOG_CONF_FILE_SYNC }
enum qb_log_filter_type { QB_LOG_FILTER_FILE, QB_LOG_FILTER_FUNCTION,
QB_LOG_FILTER_FORMAT }
enum qb_log_filter_conf { QB_LOG_FILTER_ADD, QB_LOG_FILTER_REMOVE,
QB_LOG_FILTER_CLEAR_ALL, QB_LOG_TAG_SET, QB_LOG_TAG_CLEAR,
QB_LOG_TAG_CLEAR_ALL }
Functions
void qb_log_real_ (struct qb_log_callsite *cs,...)
Internal function: use qb_log() or qb_logt().
void qb_log_real_va_ (struct qb_log_callsite *cs, va_list ap)
void qb_log_from_external_source (const char *function, const char
*filename, const char *format, uint8_t priority, uint32_t lineno,
uint32_t tags,...)
This function is to import logs from other code (like libraries)
that provide a callback with their logs.
struct qb_log_callsite * qb_log_callsite_get (const char *function,
const char *filename, const char *format, uint8_t priority,
uint32_t lineno, uint32_t tags)
Get or create a callsite at the give position.
void qb_log_from_external_source_va (const char *function, const char
*filename, const char *format, uint8_t priority, uint32_t lineno,
uint32_t tags, va_list ap)
void qb_log_init (const char *name, int32_t facility, uint8_t priority)
Init the logging system.
void qb_log_fini (void)
Logging system finalization function.
int32_t qb_log_callsites_register (struct qb_log_callsite *_start,
struct qb_log_callsite *_stop)
If you are using dynamically loadable modules via dlopen() and you
load them after qb_log_init() then after you load the module you
will need to do the following to get the filters to work in that
module.
void qb_log_callsites_dump (void)
Dump the callsite info to stdout.
int32_t qb_log_ctl (int32_t target, enum qb_log_conf conf_type, int32_t
arg)
Main logging control function.
int32_t qb_log_filter_ctl (int32_t value, enum qb_log_filter_conf c,
enum qb_log_filter_type type, const char *text, uint8_t
low_priority)
This allows you modify the 'tags' and 'targets' callsite fields at
runtime.
int32_t qb_log_filter_ctl2 (int32_t value, enum qb_log_filter_conf c,
enum qb_log_filter_type type, const char *text, uint8_t
high_priority, uint8_t low_priority)
This extends qb_log_filter_ctl() by been able to provide a
high_priority.
int32_t qb_log_filter_fn_set (qb_log_filter_fn fn)
Instead of using the qb_log_filter_ctl() functions you can apply
the filters manually by defining a callback and setting the targets
field using qb_bit_set() and qb_bit_clear() like the following
below.
void qb_log_tags_stringify_fn_set (qb_log_tags_stringify_fn fn)
Set the callback to map the 'tags' bit map to a string.
void qb_log_format_set (int32_t t, const char *format)
Set the format specifiers.
int32_t qb_log_file_open (const char *filename)
Open a log file.
void qb_log_file_close (int32_t t)
Close a log file and release is resources.
int32_t qb_log_thread_priority_set (int32_t policy, int32_t priority)
When using threaded logging set the pthread policy and priority.
int32_t qb_log_thread_start (void)
Start the logging pthread.
ssize_t qb_log_blackbox_write_to_file (const char *filename)
Write the blackbox to file.
void qb_log_blackbox_print_from_file (const char *filename)
Read the blackbox for file and print it out.
int32_t qb_log_custom_open (qb_log_logger_fn log_fn, qb_log_close_fn
close_fn, qb_log_reload_fn reload_fn, void *user_data)
Open a custom log target.
void qb_log_custom_close (int32_t t)
Close a custom log target and release is resources.
void * qb_log_target_user_data_get (int32_t t)
Retrieve the user data set by either qb_log_custom_open or
qb_log_target_user_data_set.
int32_t qb_log_target_user_data_set (int32_t t, void *user_data)
Associate user data with this log target.
void qb_log_target_format (int32_t target, struct qb_log_callsite *cs,
time_t timestamp, const char *formatted_message, char
*output_buffer)
format the callsite and timestamp info according to the format set
using qb_log_format_set() It is intended to be used from your
custom logger function.
int32_t qb_log_facility2int (const char *fname)
Convert string 'auth' to equivalent number 'LOG_AUTH' etc.
const char * qb_log_facility2str (int32_t fnum)
Convert number 'LOG_AUTH' to equivalent string 'auth' etc.
Variables
struct qb_log_callsite aligned
An instance of this structure is created in a special ELF section
at every dynamic debug callsite.
struct qb_log_callsite __start___verbose []
struct qb_log_callsite __stop___verbose []
Detailed Description
The logging API provides four main parts (basics, filtering, threading
& blackbox).
The idea behind this logging system is not to be prescriptive but to
provide a set of tools to help the developer achieve what they want
quickly and easily.
Basic logging API..RS 4 Call qb_log() to generate a log message. Then
to write the message somewhere meaningful call qb_log_ctl() to
configure the targets.
Simplist possible use:main() {
qb_log_init('simple-log', LOG_DAEMON, LOG_INFO);
// ...
qb_log(LOG_WARNING, 'watch out');
// ...
qb_log_fini();
}
Configuring log targets..RS 4 A log target can by syslog, stderr, the blackbox
or a text file. By default only syslog is enabled.To enable a target do the following
qb_log_ctl(QB_LOG_BLACKBOX, QB_LOG_CONF_ENABLED, QB_TRUE);
syslog, stderr and the blackbox are static (they don't need to be created,
just enabled or disabled. However you can open multiple logfiles (32 -
QB_LOG_BLACKBOX). To do this use the following code.
mytarget = qb_log_file_open('/var/log/mylogfile');
qb_log_ctl(mytarget, QB_LOG_CONF_ENABLED, QB_TRUE);
Once your targets are enabled/opened you can configure them as follows:
Configure the size of blackbox
qb_log_ctl(QB_LOG_BLACKBOX, QB_LOG_CONF_SIZE, 1024*10);
Make logging to file threaded:
qb_log_ctl(mytarget, QB_LOG_CONF_THREADED, QB_TRUE);
To workaround your syslog daemon filtering all messages > LOG_INFO
qb_log_ctl(QB_LOG_SYSLOG, QB_LOG_CONF_PRIORITY_BUMP,
LOG_INFO - LOG_DEBUG);
To ensure all logs to file targets are fsync'ed (default QB_FALSE)
qb_log_ctl(mytarget, QB_LOG_CONF_FILE_SYNC, QB_TRUE);
Filtering messages..RS 4 To have more power over what log messages go to whichtarget you can apply filters to the targets. What happens is the desiredcallsites have the correct bit set. Then when the log message is generated itgets sent to the targets based on which bit is set in the callsite's 'target'bitmap. Messages can be filtered based on the:1. filename + priority2. function name + priority3. format string + prioritySo to make all logs from evil_fnunction() go to stderr do the following:
qb_log_filter_ctl(QB_LOG_STDERR, QB_LOG_FILTER_ADD,
QB_LOG_FILTER_FUNCTION, 'evil_fnunction', LOG_TRACE);
So to make all logs from totem* (with a priority <= LOG_INFO) go to stderr do
the following:
qb_log_filter_ctl(QB_LOG_STDERR, QB_LOG_FILTER_ADD,
QB_LOG_FILTER_FILE, 'totem', LOG_INFO);
So to make all logs with the substring 'ringbuffer' go to stderr do thefollowing:
qb_log_filter_ctl(QB_LOG_STDERR, QB_LOG_FILTER_ADD,
QB_LOG_FILTER_FORMAT, 'ringbuffer', LOG_TRACE);
Threaded logging..RS 4 To achieve non-blocking logging you can use threaded
logging. So any calls to write() or syslog() will not hold up your program.
Threaded logging use:main() {
qb_log_init('simple-log', LOG_DAEMON, LOG_INFO);
qb_log_ctl(QB_LOG_SYSLOG, QB_LOG_CONF_THREADED, QB_TRUE);
// ...
daemonize();
// call this after you fork()qb_log_thread_start();
// ...
qb_log(LOG_WARNING, 'watch out');
// ...
qb_log_fini();
}
A blackbox for in-field diagnosis..RS 4 This stores log messages in a
ringbuffer so they can be written to file if the program crashes (you willneed to catch SIGSEGV). These can then be easily printed out later.Note:
the blackbox is not enabled by default.
Blackbox usage:
static void sigsegv_handler(int sig)
{
(void)signal (SIGSEGV, SIG_DFL);
qb_log_blackbox_write_to_file('simple-log.fdata');
qb_log_fini();
raise(SIGSEGV);
}
main() {
signal(SIGSEGV, sigsegv_handler);
qb_log_init('simple-log', LOG_DAEMON, LOG_INFO);
qb_log_filter_ctl(QB_LOG_BLACKBOX, QB_LOG_FILTER_ADD,
QB_LOG_FILTER_FILE, '*', LOG_DEBUG);
qb_log_ctl(QB_LOG_BLACKBOX, QB_LOG_CONF_SIZE, 1024*10);
qb_log_ctl(QB_LOG_BLACKBOX, QB_LOG_CONF_ENABLED, QB_TRUE);
// ...
qb_log(LOG_WARNING, 'watch out');
// ...
qb_log_fini();
}
Tagging messages..RS 4 You can tag messages using the second argument toqb_logt() or by using qb_log_filter_ctl(). This can be used to add feature or
sub-system information to the logs.
const char* my_tags_stringify(uint32_t tags) {
if (qb_bit_is_set(tags, QB_LOG_TAG_LIBQB_MSG_BIT) {
return 'libqb';
} else if (tags == 3) {
return 'three';
} else {
return 'MAIN';
}
}
main() {
// ...
qb_log_tags_stringify_fn_set(my_tags_stringify);
qb_log_format_set(QB_LOG_STDERR, '[%5g] %p %b');
// ...
qb_logt(LOG_INFO, 3, 'hello');
qb_logt(LOG_INFO, 0, 'hello');
}
The code above will produce:
[libqb] some message
[three] info hello
[MAIN ] info hello
Define Documentation
#define LOG_TRACE (LOG_DEBUG + 1)
#define qb_enter() qb_log(LOG_TRACE, 'ENTERING %s()', __func__)
#define qb_leave() qb_log(LOG_TRACE, 'LEAVING %s()', __func__)
#define qb_log(priority, fmt, args...) qb_logt(priority, 0, fmt, ##args)
This is the main function to generate a log message. Parameters:
priority this takes syslog priorities.
fmt usual printf style format specifiers
args usual printf style args
#define QB_LOG_BLACKBOX 2
#define QB_LOG_INIT_DATA(name) Value:
void name(void); void name(void) { if (__start___verbose != __stop___verbose) {assert(1);} } void __attribute__ ((constructor)) name(void);
#define QB_LOG_MAX_LEN 512
#define QB_LOG_STDERR 1
#define QB_LOG_STDOUT 3
#define QB_LOG_STRERROR_MAX_LEN 128
#define QB_LOG_SYSLOG 0
#define QB_LOG_TAG_LIBQB_MSG (1 << QB_LOG_TAG_LIBQB_MSG_BIT)
#define QB_LOG_TAG_LIBQB_MSG_BIT 31
#define QB_LOG_TARGET_MAX 32
#define qb_logt(priority, tags, fmt, args...) Value:
do { static struct qb_log_callsite descriptor __attribute__((section('__verbose'), aligned(8))) = { __func__, __FILE__, fmt, priority, __LINE__, 0, tags }; qb_log_real_(&descriptor, ##args); } while(0)
This is the function to generate a log message if you want to manually
add tags. Parameters:
priority this takes syslog priorities.
tags this is a uint32_t that you can use with
qb_log_tags_stringify_fn_set() to 'tag' a log message with a
feature or sub-system then you can use '%g' in the format specifer
to print it out.
fmt usual printf style format specifiers
args usual printf style args
#define qb_perror(priority, fmt, args...) Value:
do { char _perr_buf_[QB_LOG_STRERROR_MAX_LEN]; const char *_perr_str_ = qb_strerror_r(errno, _perr_buf_, sizeof(_perr_buf_)); qb_logt(priority, 0, fmt ': %s (%d)', ##args, _perr_str_, errno); } while(0)
This is similar to perror except it goes into the logging system.
Parameters:
priority this takes syslog priorities.
fmt usual printf style format specifiers
args usual printf style args
Typedef Documentation
typedef void(* qb_log_close_fn)(int32_t t)
typedef void(* qb_log_filter_fn)(struct qb_log_callsite *cs)
typedef void(* qb_log_logger_fn)(int32_t t, struct qb_log_callsite *cs,
time_t timestamp, const char *msg)
typedef void(* qb_log_reload_fn)(int32_t t)
typedef const char*(* qb_log_tags_stringify_fn)(uint32_t tags)
typedef void(* qb_log_vlogger_fn)(int32_t t, struct qb_log_callsite *cs,
time_t timestamp, va_list ap)
Enumeration Type Documentation
enum qb_log_conf
Enumerator:
QB_LOG_CONF_ENABLED
QB_LOG_CONF_FACILITY
QB_LOG_CONF_DEBUG
QB_LOG_CONF_SIZE
QB_LOG_CONF_THREADED
QB_LOG_CONF_PRIORITY_BUMP
QB_LOG_CONF_STATE_GET
QB_LOG_CONF_FILE_SYNC
enum qb_log_filter_conf
Enumerator:
QB_LOG_FILTER_ADD
QB_LOG_FILTER_REMOVE
QB_LOG_FILTER_CLEAR_ALL
QB_LOG_TAG_SET
QB_LOG_TAG_CLEAR
QB_LOG_TAG_CLEAR_ALL
enum qb_log_filter_type
Enumerator:
QB_LOG_FILTER_FILE
QB_LOG_FILTER_FUNCTION
QB_LOG_FILTER_FORMAT
enum qb_log_target_state
Enumerator:
QB_LOG_STATE_UNUSED
QB_LOG_STATE_DISABLED
QB_LOG_STATE_ENABLED
Function Documentation
void qb_log_blackbox_print_from_file (const char * filename)
Read the blackbox for file and print it out.
ssize_t qb_log_blackbox_write_to_file (const char * filename)
Write the blackbox to file.
struct qb_log_callsite* qb_log_callsite_get (const char * function, const
char * filename, const char * format, uint8_t priority, uint32_t
lineno, uint32_t tags) [read]
Get or create a callsite at the give position. The result can then be
passed into qb_log_real_()
Parameters:
function originating function name
filename originating filename
format format string
priority this takes syslog priorities.
lineno file line number
tags the tag
void qb_log_callsites_dump (void)
Dump the callsite info to stdout.
int32_t qb_log_callsites_register (struct qb_log_callsite * _start, struct
qb_log_callsite * _stop)
If you are using dynamically loadable modules via dlopen() and you load
them after qb_log_init() then after you load the module you will need
to do the following to get the filters to work in that module. .PP
_start = dlsym (dl_handle, '__start___verbose');
_stop = dlsym (dl_handle, '__stop___verbose');
qb_log_callsites_register(_start, _stop);
int32_t qb_log_ctl (int32_t target, enum qb_log_conf conf_type, int32_t
arg)
Main logging control function. Parameters:
target QB_LOG_SYSLOG, QB_LOG_STDERR or result from
qb_log_file_open()
conf_type what to configure
arg the new value
See also:
qb_log_conf
Return values:
-errno on error
0 on success
qb_log_target_state for QB_LOG_CONF_STATE_GET
void qb_log_custom_close (int32_t t)
Close a custom log target and release is resources.
int32_t qb_log_custom_open (qb_log_logger_fn log_fn, qb_log_close_fn
close_fn, qb_log_reload_fn reload_fn, void * user_data)
Open a custom log target. Return values:
-errno on error
3 to 31 (to be passed into other qb_log_* functions)
int32_t qb_log_facility2int (const char * fname)
Convert string 'auth' to equivalent number 'LOG_AUTH' etc.
const char* qb_log_facility2str (int32_t fnum)
Convert number 'LOG_AUTH' to equivalent string 'auth' etc.
void qb_log_file_close (int32_t t)
Close a log file and release is resources.
int32_t qb_log_file_open (const char * filename)
Open a log file. Return values:
-errno on error
3 to 31 (to be passed into other qb_log_* functions)
int32_t qb_log_filter_ctl (int32_t value, enum qb_log_filter_conf c, enum
qb_log_filter_type type, const char * text, uint8_t low_priority)
This allows you modify the 'tags' and 'targets' callsite fields at
runtime.
int32_t qb_log_filter_ctl2 (int32_t value, enum qb_log_filter_conf c, enum
qb_log_filter_type type, const char * text, uint8_t high_priority,
uint8_t low_priority)
This extends qb_log_filter_ctl() by been able to provide a
high_priority.
int32_t qb_log_filter_fn_set (qb_log_filter_fn fn)
Instead of using the qb_log_filter_ctl() functions you can apply the
filters manually by defining a callback and setting the targets field
using qb_bit_set() and qb_bit_clear() like the following below. .PP
static void
m_filter(struct qb_log_callsite *cs)
{
if ((cs->priority >= LOG_ALERT &&
cs->priority <= LOG_DEBUG) &&
strcmp(cs->filename, 'my_c_file.c') == 0) {
qb_bit_set(cs->targets, QB_LOG_SYSLOG);
} else {
qb_bit_clear(cs->targets, QB_LOG_SYSLOG);
}
}
void qb_log_fini (void)
Logging system finalization function. It releases any shared memory.
Stops the logging thread if running. Flushes the last message to their
destinations.
void qb_log_format_set (int32_t t, const char * format)
Set the format specifiers. n FUNCTION NAME f FILENAME l FILELINE p
PRIORITY t TIMESTAMP b BUFFER g TAGS N name (passed into qb_log_init) P
PID H hostname
any number between % and character specify field length to pad or chop
void qb_log_from_external_source (const char * function, const char *
filename, const char * format, uint8_t priority, uint32_t lineno,
uint32_t tags, ...)
This function is to import logs from other code (like libraries) that
provide a callback with their logs. Note:
the performance of this will not impress you, as the filtering is
done on each log message, not before hand. So try doing basic pre-
filtering.
Parameters:
function originating function name
filename originating filename
format format string
priority this takes syslog priorities.
lineno file line number
tags this is a uint32_t that you can use with
qb_log_tags_stringify_fn_set() to 'tag' a log message with a
feature or sub-system then you can use '%g' in the format specifer
to print it out.
void qb_log_from_external_source_va (const char * function, const char *
filename, const char * format, uint8_t priority, uint32_t lineno,
uint32_t tags, va_list ap)
void qb_log_init (const char * name, int32_t facility, uint8_t priority)
Init the logging system. Parameters:
name will be passed into openlog()
facility default for all new targets.
priority a basic filter with this priority will be added.
void qb_log_real_ (struct qb_log_callsite * cs, ...)
Internal function: use qb_log() or qb_logt().
void qb_log_real_va_ (struct qb_log_callsite * cs, va_list ap)
void qb_log_tags_stringify_fn_set (qb_log_tags_stringify_fn fn)
Set the callback to map the 'tags' bit map to a string.
void qb_log_target_format (int32_t target, struct qb_log_callsite * cs,
time_t timestamp, const char * formatted_message, char * output_buffer)
format the callsite and timestamp info according to the format set
using qb_log_format_set() It is intended to be used from your custom
logger function.
void* qb_log_target_user_data_get (int32_t t)
Retrieve the user data set by either qb_log_custom_open or
qb_log_target_user_data_set.
int32_t qb_log_target_user_data_set (int32_t t, void * user_data)
Associate user data with this log target. Note:
only use this with custom targets
int32_t qb_log_thread_priority_set (int32_t policy, int32_t priority)
When using threaded logging set the pthread policy and priority. Return
values:
-errno on error
0 success
int32_t qb_log_thread_start (void)
Start the logging pthread.
Variable Documentation
struct qb_log_callsite __start___verbose[]
struct qb_log_callsite __stop___verbose[]
struct qb_log_callsite aligned
An instance of this structure is created in a special ELF section at
every dynamic debug callsite. At runtime, the special section is
treated as an array of these.
Author
Generated automatically by Doxygen for libqb from the source code.
Version 0.16.0 21 Nov 2013 qblog.h(3)