html2psrc(5) html2ps configuration file format html2psrc(5)NAMEhtml2psrc - configuration file format for html2ps(1)DESCRIPTION
Configuration files are used for layout control, resource
information etc. Normally, there should always exist a
global configuration file. In this file one typically
specify things like: what image conversion packages are
available on the system, the default paper size, the
default text fonts and sizes, etc.
For Unix and Windows systems, the installation script
'install' can be used to automatically build a global con
figuration file with all necessary definitions, and
install all files. The files replaced by the installation
are saved. If you for some reason are not satisfied with
the new version: execute the script 'backout' to reinstall
your earlier version.
On other systems, you will have to manually create a
global configuration file, and insert the name of this
file into the html2ps script (close to the beginning, the
line starting with "$globrc="). The configuration file
should contain a package block, and perhaps paper and
hyphenation blocks, described below.
Each user can then have a personal configuration file (by
default $HOME/.html2psrc) that complements/overrides the
definitions made in the global file. It is also possible
to specify alternative files on the command line, using
the -f option.
FILE FORMAT
A configuration file can include other configuration
files. This is done with:
@import "filename";
The rest of the configuration file consists of zero or
more blocks. A block is given by a block name, followed
by the block definition, as in:
BODY {
font-size: 12pt;
font-family: Helvetica;
text-align: justify
}
The block definition, enclosed by curly braces: { }, con
sists of key-value pairs and/or other blocks. A key-value
pair consists of the key name followed by a colon, fol
lowed by the value. Blocks and key-value pairs are sepa
rated by semicolons. The semicolon may be omitted after a
block.
Several blocks can share the same definition. The block
names are then separated be commas, as in:
H2, H4, H6 { font-style: italic }
A comment in a configuration file starts with the charac
ters "/*" and ends with "*/":
@html2ps {
seq-number: 1; /* Automatic numbering of headings */
}
Notations
Here are some definitions of terms used below:
Flag: A value of either 0 (absence, inactive etc)
or 1 (presence, active etc).
Absolute size:
A real number optionally followed by one of
the following two-letter unit identifiers:
cm (centimeters), mm (millimeters), in
(inches), pt (points, 1pt = 1/72 inch), pc
(picas, 1pc = 12pt). The default unit is
centimeters.
Relative size:
A size relative to current fontsize. The
default and currently only recognized unit
is em. One em equals the size of the current
font. The value should be given as a real
number, optionally followed by 'em', as in
'0.25em'.
Whitespace:
Any one of the characters: space, tab, new
line, or carriage return.
CSS2 blocks
All blocks, except one: the @html2ps block, coincides with
a subset of the Cascading Style Sheets, level 2 CSS2 Spec
ification (http://www.w3.org/TR/REC-CSS2/). The following
default settings for html2ps illustrate just about every
thing that currently can be used from the CSS2 specifica
tion:
BODY {
font-family: Times;
font-size: 11pt;
text-align: left;
background: white;
}
H1, H2, H3, H4, H5, H6 {
font-weight: bold;
margin-top: 0.8em;
margin-bottom: 0.5em;
}
H1 { font-size: 19pt }
H2 { font-size: 17pt }
H3 { font-size: 15pt }
H4 { font-size: 13pt }
H5 { font-size: 12pt }
H6 { font-size: 11pt }
P, OL, UL, DL, BLOCKQUOTE, PRE {
margin-top: 1em;
margin-bottom: 1em;
}
P {
line-height: 1.2em;
text-indent: 0;
}
OL, UL, DD { margin-left: 2em }
TT, KBD, PRE { font-family: Courier }
PRE { font-size: 9pt }
BLOCKQUOTE {
margin-left: 1em;
margin-right: 1em;
}
ADDRESS {
margin-top: 0.5em;
margin-bottom: 0.5em;
}
TABLE {
margin-top: 1.3em;
margin-bottom: 1em;
}
DIV.noprint { display: none }
DEL { text-decoration: line-through }
A:link, HR { color: black }
@page {
margin-left: 2.5cm;
margin-right: 2.5cm;
margin-top: 3cm;
margin-bottom: 3cm;
}
The program specific block @html2ps:
This block is used to specify parameters that are specific
to html2ps, and not covered by CSS2. The @html2ps block
has several sub-blocks and key-value pairs, these are
described in this section.
The package block
This block is used to specify which program packages
are installed on the system. Typically, this is done
in the global configuration file.
PerlMagick
A flag specifying whether the Perl module
PerlMagick is installed or not. The default is
0.
ImageMagick
A flag specifying whether the ImageMagick
package is installed or not. The default is 0.
pbmplus
A flag specifying whether the pbmplus package
is installed or not. The default is 0.
netpbm A flag specifying whether the netpbm package
is installed or not. The default is 0.
djpeg A flag specifying whether djpeg is installed
or not. The default is 0.
Ghostscript
A flag specifying whether Ghostscript is
installed or not. The default is 0.
TeX A flag specifying whether the TeX package is
installed or not. The default is 0.
dvips A flag specifying whether dvips is installed
or not. The default is 0.
libwww-perl
A flag specifying whether the Perl module
library libwww-perl is installed or not. The
default is 0.
jfriedl
A flag specifying whether the Perl scripts
www.pl and network.pl (by Jeffrey Friedl) are
installed or not. The default is 0.
geturl When neither of the Perl packages for retriev
ing remote documents are available, it is pos
sible to use some other program like lynx or
url_get. This value should be set to a command
that retrieves a document with a complete MIME
header, such as "lynx -source -mime_header" or
"url_get -h".
check The name of a program used for syntax checking
HTML documents. No default, a good choice is
weblint.
path A colon separated list of directories where
the executables from the program packages are.
It is only necessary to include directories
that are not in the PATH for a typical user.
The paper block
The paper size is defined in this block. The size can
either be given as one of the recognized paper types
or by giving explicit values for the paper height and
width. As of version 1.0 beta2, one can also use the
@page block in CSS2 for the paper size. The paper
block is kept for backwards compatibility. Also, one
can only specify explicit dimensions in @page, not
any paper types by name.
type Paper type, possible choices are: A0, A1, A2,
A3, A4,...,A10, B0, B1,...,B10, letter, legal,
arche, archd, archc, archb, archa, flsa, flse,
halfletter, 11x17, and ledger (this set of
paper types is taken from Aladdin
Ghostscript). The default is A4.
height An absolute size specifying the paper height.
width An absolute size specifying the paper width.
The option block
This block is used to set default values for the
command line options. The key in the key-value pair
is the option name, in either its long or short form.
twoup Two column (2-up) output. The default is one
column per page.
base Use URL as a base to expand relative refer
ences for in-line images. This is useful if
you have downloaded a document to a local
file. The URL should then be the URL of the
original document.
check Check the syntax of the HTML file (using an
external syntax checker). The default is to
not make a syntax check.
toc Generate a table of contents (ToC). The value
should be a string consisting of one of the
letters 'f', 'h', or 't', optionally combined
with the letter 'b':
b The ToC will be printed first. This
requires that Ghostscript is installed.
f The ToC will be generated from the
links in the converted document.
h The ToC will be generated from headings
and titles in the converted documents.
Note that if the document author for
some strange reason has chosen to use
some other means to represent the head
ings than the HTML elements H1,...,H6,
you are out of luck!
t The ToC will be generated from links
having the attribute rev=TOC in the
converted document.
debug Generate debugging information. You should
always use this option when reporting problems
with html2ps.
DSC Generate DSC compliant PostScript. This
requires Ghostscript and can take quite some
time to do. Note that a PostScript file gener
ated with this option cannot be used as input
to html2ps for reformatting later.
encoding
The document encoding. Currently recognized
values are ISO-8859-1, EUC-JP, SHIFT-JIS, and
ISO-2022-JP (other EUC-xx encodings may also
work). The default is ISO-8859-1.
rcfile A colon separated list of configuration file
names to use instead of the default personal
configuration file $HOME/.html2psrc. Defini
tions made in one file override definitions in
previous files (the last file in the list has
highest precedence). An empty file name (as in
':file', 'file1::file3', or 'file:') will
expand to the default personal file. The envi
ronment variable HTML2PSPATH is used to spec
ify the directories where to search for these
files. (Note: this is only supposed to be used
on the command line, not in a configuration
file.)
frame Draw a frame around the text on each page. The
default is to not draw a frame.
grayscale
Convert colour images to grayscale images.
Note that the PostScript file will be smaller
when the images are converted to grayscale.
The default is to generate colour images.
help Show usage information.
hyphenate
Hyphenate the text. This requires TeX hyphen
ation pattern files.
scaleimage
Scale in-line images with a factor num. The
default is 1.
cookie Enable cookie support, using a netscape for
matted cookie file (requires libwww-perl).
language
Specifies the language of the document (over
rides an eventual LANG attribute of the BODY
element). The language should be given
according to RFC1766
(ftp://ftp.nordu.net/rfc/rfc1766.txt) and ISO
639 (http://www.oasis-
open.org/cover/iso639a.html).
landscape
Generate code for printing in landscape mode.
The default is portrait mode.
scalemath
Scale mathematical formulas with a factor num.
The default is 1.
number Insert page numbers. The default is to not
number the pages.
startno
Specifies the starting page number, the
default is 1.
output Write the PostScript code to file. The default
is to write to standard output.
original
Use PostScript original images if they exist.
For example, if a document contains an image
figure.gif, and an encapsulated PostScript
file named figure.ps exists in the same direc
tory, that file will be use instead. This only
work for documents read as local files. Note:
if the PostScript file is large or contains
bitmap images, this must be combined with the
-D option. In HTML 4.0 this can be achieved in
a much better way with:
<OBJECT data="figure.ps" type="applica
tion/postscript">
<OBJECT data="figure.gif" type="image/gif">
<PRE>[Maybe some ASCII art for text
browsers]</PRE>
</OBJECT>
</OBJECT>
rootdir
When a document is read from a local file,
this value specifies a base directory for
resolving relative links starting with "/".
Typically, this should be the directory where
your web server's home page resides.
xref Insert cross references at every link to
within the set of converted documents.
scaledoc
Scale the entire document with a factor num.
The default is 1.
style This option complements/overrides definitions
made in the configuration files. The string
must follow the configuration file syntax.
(Note: this is only supposed to be used on the
command line, not in a configuration file.)
titlepage
Generate a title page. The default is to not
generate one.
text Text mode, ignore images. The default is to
include the images.
underline
Underline text that constitutes a hypertext
link. The default is to not underline.
colour Produce colour output for text and background,
when specified. The default is black text on
white background (mnemonic: coloUr ;-).
version
Print information about the current version of
html2ps.
web Process a web of documents by recursively
retrieve and convert documents that are refer
enced with hyperlinks. When dealing with
remote documents it will of course be neces
sary to impose restrictions, to avoid down
loading the entire web... The value should be
a string consisting of one of the letters 'a',
'b', 'l', 'r', or 's', optionally combined
with a combination of the letters 'p', 'L',
and a positive integer:
a Follow all links.
b Follow only links to within the same
directory, or below, as the start docu
ment.
l Follow only links specified with "<LINK
rel=NEXT>" in the document.
p Prompt for each remote document. This
mode will automatically be entered
after the first 50 documents.
r Follow only relative links.
s Follow only links to within the same
server as the start document.
L With this option, the order in which
the documents are processed will be:
first all top level documents, then the
documents linked to from these etc. For
example, if the document A has links to
B and C, and B has a link to D, the
order will be A-B-C-D. By default,
each document will be followed by the
first document it links to etc; so the
default order for the example is A-B-D-
C.
# A positive integer giving the number of
recursive levels. The default is 4
(when the option is present).
duplex Generate postscript code for single or double
sided printing. No default, valid values are:
0 Single sided.
1 Double sided.
2 Double sided, opposite page reversed
(tumble mode).
The margin block
This block is used to specify page margins. The left,
right, top and bottom margins, previously defined
with this block, should now be defined using the
@page construction from CSS2.
middle An absolute size for the distance between the
columns when printing two columns per page,
default is 2cm.
The xref block
At every hyperlink (to within the set of converted
documents) it is possible to have a cross reference
inserted. The xref block is used to control this
function.
text This defines the cross reference text to be
inserted; the symbol $N will expand to the
page number, default is "[p $N]".
passes The number of passes used to insert the cross
references. Normally, only one pass is run.
But since the insertion of the page numbers
may effect the page breaks, it might for large
documents with many links be necessary with
more than one pass to get the cross references
right. The default is 1.
The quote block
Language specific quotation marks are defined in this
block. These quotation marks are used with the HTML
4.01 element Q for short quotations. Quotation marks
are predefined for a few languages (English, Swedish,
Danish, Norwegian (also Nynorsk and Bokml), Finnish,
Spanish, French, German and Italian). It is possible
to define different quotation marks for quotes within
quotes.
A quotation mark is defined as a string, using the
same encoding as the converted document (normally
ISO-8859-1), and/or with character entities. Note
that quotation mark characters for several languages
are not included in ISO-8859-1, and their correspond
ing character entities were not been defined prior to
HTML 4.0.
Quotation marks for a language can be defined explic
itly in a sub-block of the quote block. One can also
identify the set of quotation marks with another pre
viously defined language, using a key-value pair.
The sub-block/key name should equal the language code
as defined in ISO 639. The language sub-block can
have the following key-values:
open The quote opening character(s).
close The quote closing character(s). If
undefined, it will equal open.
open2 The quote opening character(s) for
quotes within quotes. If undefined, it
will equal open.
close2 The quote closing character(s) for
quotes within quotes. If undefined, it
will equal close.
Example: English and Spanish use the same set of quo
tation marks - at least according to my book on
typography. These (already known to html2ps) are
defined with:
quote {
en {
open: "“";
close: "”";
open2: "`";
close2: "'";
}
es: en;
}
The toc block
When a table of contents (ToC) is generated from doc
ument headings and titles, the appearance is con
trolled by this block.
heading
A string with HTML code specifying a heading
used on the first ToC page.
level The maximum heading level used for building
the ToC. The default is 6, which means that
all headings will generate ToC entries.
indent The ToC entries are indented proportional to
the corresponding heading level. This value
specifies the size of the indentation. The
default is 1em.
The titlepage block
When a title page is generated, its appearance is
controlled by this block.
content
A string with HTML code specifying a heading
used on the title page, The default is "<DIV
align=center> <H1><BIG>$T</BIG></H1>
<H2>$[author]</H2></DIV>".
margin-top
The size of the top margin on the title page,
The default is 4cm.
The font block
Currently, html2ps recognizes the fonts: Times, New-
Century-Schoolbook, Helvetica, Helvetica-Narrow,
Palatino, Avantgarde, Bookman, and Courier. To add a
new font (family), choose a name (consisting of let
ters, digits, hyphens, and underscores) for the font.
Then define a sub-block to the font block, with the
same name as the chosen font name. This block can
contain two key-value pairs:
names A string containing four PostScript
font names, separated by whitespace,
corresponding to the font styles nor
mal, italic, bold, and bold-italic. If
less than four names are given, the
first is used for the missing names.
Note that PostScript font names are
case sensitive.
files A string of four file names, separated
by whitespace, for files containing
font definitions for the four font
styles as specified above.
Example: A font 'myfont' has its four font styles
defined in local files. To use this font in all
tables in the converted documents, one can use some
thing like:
TABLE { font-family: myfont }
@html2ps {
font {
myfont {
names: "MyFont-Roman MyFont-Italic MyFont-
Bold MyFont-BoldItalic";
files: "/x/y/myfr.pfa /x/y/myfi.pfa
/x/y/myfb.pfa /x/y/myfbi.pfa";
}
}
}
The hyphenation block
Hyphenation pattern files for different languages are
specified in sub-blocks within this block. The blocks
names should equal the language code as defined in
ISO 639. These language blocks can contain the fol
lowing two key-values:
file A hyphenation pattern file in TeX for
mat for this language.
extfile
A file containing a list of hyphenation
exceptions for this language. The
exception file should contain words,
separated by whitespaces, with hyphens
inserted where hyphenation is allowed,
as in: "in-fra-struc-ture white-space".
For example, for English (with language code 'en')
one can have a block like:
en {
file: "/opt/tex/lib/macros/hyphen.tex";
extfile: "/opt/tdb/lib/html2ps/enhyphext";
}
The hyphenation block itself can furthermore have
these key-values:
min A positive integer defining the minimum number
of letters a word must contain to make it a
candidate for hyphenation. The default is 8.
start A positive integer defining the minimum number
of letters that must precede the hyphen when a
word is hyphenated. The default is 4.
end A positive integer defining the minimum number
of letters that must follow the hyphen when a
word is hyphenated. The default is 3.
The header block
This block is used to specify page headers. It is
possible to define left, center, and right headers.
Different headers for odd and even pages can be spec
ified. Some symbols can be used that will expand to
document title, author, date etc. See below.
left A left aligned header. If the alternate flag
in this block is set to 1, this will be the
right header on even pages.
center A centered header.
right A right aligned header. If the alternate flag
in this block is set to 1, this will be the
left header on even pages.
odd-left
A left aligned header on odd pages.
odd-center
A centered header on odd pages.
odd-right
A right aligned header on odd pages.
even-left
A left aligned header on even pages.
even-center
A centered header on even pages.
even-right
A right aligned header on even pages.
font-family
The font used for the header, default is Hel
vetica.
font-size
The font size for the header, default is 8pt.
font-style
The default is "normal".
font-weight
The default is "normal".
color The header color, default is black.
alternate
A flag indicating whether the headers given by
the left and right keys should change place on
even pages. Typically used for double sided
printing. The default is 1.
The footer block
This block is used to specify page footers. It is
possible to define left, center, and right footers.
Different footers for odd and even pages can be spec
ified. Some symbols can be used that will expand to
document title, author, date etc. See below.
left A left aligned footer. If the alternate flag
in this block is set to 1, this will be the
right footer on even pages.
center A centered footer.
right A right aligned footer. If the alternate flag
in this block is set to 1, this will be the
left footer on even pages.
odd-left
A left aligned footer on odd pages.
odd-center
A centered footer on odd pages.
odd-right
A right aligned footer on odd pages.
even-left
A left aligned footer on even pages.
even-center
A centered footer on even pages.
even-right
A right aligned footer on even pages.
font-family
The font used for the footer, default is Hel
vetica.
font-size
The font size for the footer, default is 8pt.
font-style
The default is "normal".
font-weight
The default is "normal".
color The footer color, default is black.
alternate
A flag indicating whether the footers given by
the left and right keys should change place on
even pages. Typically used for double sided
printing. The default is 1.
The frame block
The appearance of the optional frame (drawn on each
page) is controlled by this block.
width The width of the frame, default is 0.6pt.
margin The size of the frame margin, default is
0.5cm.
color The colour of the frame, default is black.
The justify block
This block specifies the maximum amount of extra
space inserted between words and letters when text
justification is in effect.
word Maximum amount of extra space inserted between
words. The default is 15pt.
letter Maximum amount of extra space inserted between
letters within words. The default is 0pt.
The draft block
It is possible to have some text written in a large
font diagonally across each page. Typically this is a
word, written in a very light colour, indicating that
the document is a draft.
text The text to be printed, default is "DRAFT".
print A flag specifying whether the draft text
should be printed or not. If unspecified, the
draft text is printed when the document head
contains <META name="Status" content="Draft">.
dir Specifies print direction, 0=downwards,
1=upwards.
font-family
The default is Helvetica.
font-style
The default is "normal".
font-weight
The default is "bold".
color The default is "F0F0F0".
The colour block
The 16 standard colour names from HTML 4.01 (although
their use in HTML elements are now deprecated) are
recognized by html2ps. Use this block to extend this
list of colours. This is done with key-value pairs,
where the key is the colour name, and the value is
the colour given as a hexadecimal RGB value, for
example: "brown: A52A2A;".
Key-value pairs in the @html2ps block
html2psrc
The name of the default personal configuration
file. The default is $HOME/.html2psrc.
imgalt Specifies which text should be written as a
replacement for in-line images when the IMG element
has no ALT attribute. The default is "[IMAGE]".
datefmt
The symbol $D can be used in page headers and foot
ers to insert the current date/time; the value of
the datefmt key specifies the format used. The syn
tax is the same as in the strftime(3) routine. The
default is "%e %b %Y %R", which gives a date
string like "15 Aug 2000 22:32".
locale The locale (language code) used for formating lan
guage dependent parts of the date/time in datefmt.
If unspecified, the value is taken from environment
variables, see setlocale(3). No default.
doc-sep
A string of HTML code that will be inserted between
the documents when more than one are converted. The
default is "<!--NewPage-->", which will cause a
page break. You may use (almost) any HTML code, for
example "<HR><HR>" or "<IMG src=...>".
ball-radius
The radius, given as a relative size, of the balls
used in unordered lists. The default is 0.25em.
numbstyle
Page numbering style, 0=arabic, 1=roman. The
default is 0.
showurl
When this flag is set to 1, the URL for external
links are shown within parentheses after the link.
The default is 0.
seq-number
When this flag is set, the headings in the document
will be sequentially numbered: H1 headings will be
numbered 1, 2,..., H2 headings 1.1, 1.2, etc. The
default is 0.
extrapage
A flag specifying whether an extra (empty) page
should be printed, when necessary, to ensure that
the title page, the table of contents, and the doc
ument itself will start on odd pages. This is typi
cally desirable for double sided printing. The
default is 1.
break-table
A flag specifying if a table should be broken
across two pages when it does not fit on the cur
rent page, but it does on a page of its own. The
default is 0 (avoid breaking tables when possible).
forms This flag is used to specify whether FORM elements
in the document should be processed or ignored.
Some forms may be suitable for printing out and be
filled out (with a pen), others are not. The
default is 1.
textarea-data
When a TEXTAREA element contains prefilled data,
the text will be used as labels if this flag is
set, otherwise ignored. The default is 0.
page-break
Set this flag to 0 to suppress the normal behavior
of generating page breaks from the comment <!--New
Page--> etc, as specified below. The default is 1.
expand-acronyms
A flag specifying whether acronyms, given by the
ACRONYM element, should be expanded or not. The
default is 0.
spoof Some web servers return different documents depend
ing on which user agent is used to retrieve the
document. You can fool the web server that a cer
tain browser is used, by setting this value to the
identification used by the browser, such as
"Mozilla/4.0". This only works if you are using one
of the Perl packages to retrieve remote documents.
ssi When this flag is set, some Server Side Includes
will be processed when the document is read from a
local file. Examples are <!--#include file=...>,
<!--#echo var="LAST_MODIFIED">, <!--#config
timefmt=...>. The default is 1.
prefilled
This flag controls whether the content of form ele
ments should be rendered or not. That is, when this
flag is set, the content of TEXTAREA elements, and
the value of the value attribute of text INPUT ele
ments will be shown. Also, checked radio buttons
and checkboxes will be marked. The default is 0.
SYMBOLS
The following symbols can be used on the title page, the
page headers/footers, and in the heading for the table of
contents:
Symbols of the form "$[name]" will expand to the value of
the content attribute of META elements, having either of
the attributes "name=name" or "http-equiv=name" (case
insensitive string matching). For example, when a docu
ment containing:
<META name="expires" content="31 Dec 2001">
is converted, using a configuration file with:
footer { left: "Expires: $[expires]" }
this left footer will be inserted:
Expires: 31 Dec 2001
In addition, these symbols are defined:
$T Current document title.
$A Author of current document, as specified
with <META name="Author" content="..."> in
the document head.
$U The URL, or file name, of current document.
$N Page number.
$H Current document heading (level 1-3).
$D Current date/time. The format is given by
the datefmt key.
So $A is equivalent to $[author], but kept for backwards
compatibility.
To avoid symbol expansion, precede the dollar sign with a
backslash, as in "\$T".
HINTS
I imagine that a typical use of configuration files can be
something along the following lines.
System specific definitions (e.g. specification of avail
able program packages) and global defaults (paper type
etc) are defined in the global configuration file.
If there is more than one user of the program on the sys
tem, each user can also have a personal configuration file
with his/hers own personal preferences. (On a single user
system one can use the global configuration file for this
purpose as well.)
One may also develop a collection of configuration files
for typical situations. These files are placed in a direc
tory that is searched by html2ps (the search path is
defined with the environment variable HTML2PSPATH). For
example, to print a document as slides - in landscape
mode, with large text in Helvetica, and a thick frame -
one can create a configuration file, called 'slides' say,
containing:
@html2ps {
option {
landscape: 1;
frame: 1;
}
frame { width: 3pt }
}
BODY {
font-family: Helvetica;
font-size: 20pt;
}
H1 { font-size: 35pt }
H2 { font-size: 32pt }
H3 { font-size: 29pt }
H4 { font-size: 26pt }
H5 { font-size: 23pt }
H6 { font-size: 20pt }
PRE { font-size: 18pt }
Then use the command:
html2ps -f slides ...
to convert the document. Note that with this command the
file 'slides' is used instead of the personal configura
tion file. If you want both to be used, giving precedence
to definitions made in the file 'slides', use the command:
html2ps -f :slides ...
(The page breaks between the slides can for example be
generated by adding '<HR class=PAGE-BREAK>' to the HTML
document.)
For features that are frequently turned on and off, and
that cannot be controlled by command line options, it may
be a good idea to create small configuration files as
"building blocks". For example a file 'A4' for printing on
A4 paper (if you have some other default paper type):
@html2ps { paper { type: A4 } }
and a file 'hnum' for automatic numbering of headings:
@html2ps { seq-number: 1 }
Combining this with the previous example: to convert a
document for printing on A4 sized slides with all headings
numbered, use the command:
html2ps -f :slides:A4:hnum ...
SEE ALSOhtml2ps(1), setlocale(3), strftime(3)VERSION
This manpage describes html2ps version 1.0 beta3.
AVAILABILITY
http://www.tdb.uu.se/~jan/html2ps.html
AUTHOR
Jan Karrman (jan@tdb.uu.se)
Autogenerated 15 Aug 2000 html2psrc(5)
