Getopt::Long(3) Perl Programmers Reference Guide Getopt::Long(3)NAMEGetopt::Long - Extended processing of command line options
SYNOPSIS
use Getopt::Long;
$result = GetOptions (...option-descriptions...);
DESCRIPTION
The Getopt::Long module implements an extended getopt
function called GetOptions(). This function adheres to the
POSIX syntax for command line options, with GNU exten
sions. In general, this means that options have long names
instead of single letters, and are introduced with a dou
ble dash "--". Support for bundling of command line
options, as was the case with the more traditional single-
letter approach, is provided but not enabled by default.
Command Line Options, an Introduction
Command line operated programs traditionally take their
arguments from the command line, for example filenames or
other information that the program needs to know. Besides
arguments, these programs often take command line options
as well. Options are not necessary for the program to
work, hence the name 'option', but are used to modify its
default behaviour. For example, a program could do its job
quietly, but with a suitable option it could provide ver
bose information about what it did.
Command line options come in several flavours. Histori
cally, they are preceded by a single dash "-", and consist
of a single letter.
-l -a -c
Usually, these single-character options can be bundled:
-lac
Options can have values, the value is placed after the
option character. Sometimes with whitespace in between,
sometimes not:
-s 24 -s24
Due to the very cryptic nature of these options, another
style was developed that used long names. So instead of a
cryptic "-l" one could use the more descriptive "--long".
To distinguish between a bundle of single-character
options and a long one, two dashes are used to precede the
option name. Early implementations of long options used a
plus "+" instead. Also, option values could be specified
either like
--size=24
or
--size 24
The "+" form is now obsolete and strongly deprecated.
Getting Started with Getopt::LongGetopt::Long is the Perl5 successor of "newgetopt.pl".
This was the first Perl module that provided support for
handling the new style of command line options, hence the
name Getopt::Long. This module also supports single-char
acter options and bundling. In this case, the options are
restricted to alphabetic characters only, and the charac
ters "?" and "-".
To use Getopt::Long from a Perl program, you must include
the following line in your Perl program:
use Getopt::Long;
This will load the core of the Getopt::Long module and
prepare your program for using it. Most of the actual
Getopt::Long code is not loaded until you really call one
of its functions.
In the default configuration, options names may be abbre
viated to uniqueness, case does not matter, and a single
dash is sufficient, even for long option names. Also,
options may be placed between non-option arguments. See
the Configuring Getopt::Long entry elsewhere in this docu
ment for more details on how to configure Getopt::Long.
Simple options
The most simple options are the ones that take no values.
Their mere presence on the command line enables the
option. Popular examples are:
--all --verbose --quiet --debug
Handling simple options is straightforward:
my $verbose = ''; # option variable with default value (false)
my $all = ''; # option variable with default value (false)
GetOptions ('verbose' => \$verbose, 'all' => \$all);
The call to GetOptions() parses the command line arguments
that are present in "@ARGV" and sets the option variable
to the value "1" if the option did occur on the command
line. Otherwise, the option variable is not touched. Set
ting the option value to true is often called enabling the
option.
The option name as specified to the GetOptions() function
is called the option specification. Later we'll see that
this specification can contain more than just the option
name. The reference to the variable is called the option
destination.
GetOptions() will return a true value if the command line
could be processed successfully. Otherwise, it will write
error messages to STDERR, and return a false result.
A little bit less simple options
Getopt::Long supports two useful variants of simple
options: negatable options and incremental options.
A negatable option is specified with a exclamation mark
"!" after the option name:
my $verbose = ''; # option variable with default value (false)
GetOptions ('verbose!' => \$verbose);
Now, using "--verbose" on the command line will enable
"$verbose", as expected. But it is also allowed to use
"--noverbose", which will disable "$verbose" by setting
its value to "0". Using a suitable default value, the pro
gram can find out whether "$verbose" is false by default,
or disabled by using "--noverbose".
An incremental option is specified with a plus "+" after
the option name:
my $verbose = ''; # option variable with default value (false)
GetOptions ('verbose+' => \$verbose);
Using "--verbose" on the command line will increment the
value of "$verbose". This way the program can keep track
of how many times the option occurred on the command line.
For example, each occurrence of "--verbose" could increase
the verbosity level of the program.
Mixing command line option with other arguments
Usually programs take command line options as well as
other arguments, for example, file names. It is good prac
tice to always specify the options first, and the other
arguments last. Getopt::Long will, however, allow the
options and arguments to be mixed and 'filter out' all the
options before passing the rest of the arguments to the
program. To stop Getopt::Long from processing further
arguments, insert a double dash "--" on the command line:
--size 24 -- --all
In this example, "--all" will not be treated as an option,
but passed to the program unharmed, in "@ARGV".
Options with values
For options that take values it must be specified whether
the option value is required or not, and what kind of
value the option expects.
Three kinds of values are supported: integer numbers,
floating point numbers, and strings.
If the option value is required, Getopt::Long will take
the command line argument that follows the option and
assign this to the option variable. If, however, the
option value is specified as optional, this will only be
done if that value does not look like a valid command line
option itself.
my $tag = ''; # option variable with default value
GetOptions ('tag=s' => \$tag);
In the option specification, the option name is followed
by an equals sign "=" and the letter "s". The equals sign
indicates that this option requires a value. The letter
"s" indicates that this value is an arbitrary string.
Other possible value types are "i" for integer values, and
"f" for floating point values. Using a colon ":" instead
of the equals sign indicates that the option value is
optional. In this case, if no suitable value is supplied,
string valued options get an empty string "''" assigned,
while numeric options are set to "0".
Options with multiple values
Options sometimes take several values. For example, a pro
gram could use multiple directories to search for library
files:
--library lib/stdlib --library lib/extlib
To accomplish this behaviour, simply specify an array ref
erence as the destination for the option:
my @libfiles = ();
GetOptions ("library=s" => \@libfiles);
Used with the example above, "@libfiles" would contain two
strings upon completion: ""lib/srdlib"" and
""lib/extlib"", in that order. It is also possible to
specify that only integer or floating point numbers are
acceptible values.
Often it is useful to allow comma-separated lists of val
ues as well as multiple occurrences of the options. This
is easy using Perl's split() and join() operators:
my @libfiles = ();
GetOptions ("library=s" => \@libfiles);
@libfiles = split(/,/,join(',',@libfiles));
Of course, it is important to choose the right separator
string for each purpose.
Options with hash values
If the option destination is a reference to a hash, the
option will take, as value, strings of the form
key"="value. The value will be stored with the specified
key in the hash.
my %defines = ();
GetOptions ("define=s" => \%defines);
When used with command line options:
--define os=linux --define vendor=redhat
the hash "%defines" will contain two keys, ""os"" with
value ""linux" and ""vendor"" with value ""redhat"". It
is also possible to specify that only integer or floating
point numbers are acceptible values. The keys are always
taken to be strings.
User-defined subroutines to handle options
Ultimate control over what should be done when (actually:
each time) an option is encountered on the command line
can be achieved by designating a reference to a subroutine
(or an anonymous subroutine) as the option destination.
When GetOptions() encounters the option, it will call the
subroutine with two arguments: the name of the option, and
the value to be assigned. It is up to the subroutine to
store the value, or do whatever it thinks is appropriate.
A trivial application of this mechanism is to implement
options that are related to each other. For example:
my $verbose = ''; # option variable with default value (false)
GetOptions ('verbose' => \$verbose,
'quiet' => sub { $verbose = 0 });
Here "--verbose" and "--quiet" control the same variable
"$verbose", but with opposite values.
If the subroutine needs to signal an error, it should call
die() with the desired error message as its argument.
GetOptions() will catch the die(), issue the error mes
sage, and record that an error result must be returned
upon completion.
If the text of the error message starts with an exclaman
tion mark "!" it is interpreted specially by GetOp_
tions(). There is currently one special command imple
mented: "die("!FINISH")" will cause GetOptions() to stop
processing options, as if it encountered a double dash
"--".
Options with multiple names
Often it is user friendly to supply alternate mnemonic
names for options. For example "--height" could be an
alternate name for "--length". Alternate names can be
included in the option specification, separated by verti
cal bar "|" characters. To implement the above example:
GetOptions ('length|height=f' => \$length);
The first name is called the primary name, the other names
are called aliases.
Multiple alternate names are possible.
Case and abbreviations
Without additional configuration, GetOptions() will ignore
the case of option names, and allow the options to be
abbreviated to uniqueness.
GetOptions ('length|height=f' => \$length, "head" => \$head);
This call will allow "--l" and "--L" for the length
option, but requires a least "--hea" and "--hei" for the
head and height options.
Summary of Option Specifications
Each option specifier consists of two parts: the name
specification and the argument specification.
The name specification contains the name of the option,
optionally followed by a list of alternative names sepa
rated by vertical bar characters.
length option name is "length"
length|size|l name is "length", aliases are "size" and "l"
The argument specification is optional. If omitted, the
option is considered boolean, a value of 1 will be
assigned when the option is used on the command line.
The argument specification can be
! The option does not take an argument and may be
negated, i.e. prefixed by "no". E.g. ""foo!"" will
allow "--foo" (a value of 1 will be assigned) and
"--nofoo" (a value of 0 will be assigned). If the
option has aliases, this applies to the aliases as
well.
Using negation on a single letter option when bundling
is in effect is pointless and will result in a warn
ing.
+ The option does not take an argument and will be
incremented by 1 every time it appears on the command
line. E.g. ""more+"", when used with "--more --more
--more", will increment the value three times, result
ing in a value of 3 (provided it was 0 or undefined at
first).
The "+" specifier is ignored if the option destination
is not a scalar.
= type [ desttype ]
The option requires an argument of the given type.
Supported types are:
s String. An arbitrary sequence of characters. It is
valid for the argument to start with "-" or "--".
i Integer. An optional leading plus or minus sign,
followed by a sequence of digits.
f Real number. For example "3.14", "-6.23E24" and so
on.
The desttype can be "@" or "%" to specify that the
option is list or a hash valued. This is only needed
when the destination for the option value is not oth
erwise specified. It should be omitted when not
needed.
: type [ desttype ]
Like "=", but designates the argument as optional. If
omitted, an empty string will be assigned to string
values options, and the value zero to numeric options.
Note that if a string argument starts with "-" or
"--", it will be considered an option on itself.
Advanced Possibilities
Object oriented interface
Getopt::Long can be used in an object oriented way as
well:
use Getopt::Long;
$p = new Getopt::Long::Parser;
$p->configure(...configuration options...);
if ($p->getoptions(...options descriptions...)) ...
Configuration options can be passed to the constructor:
$p = new Getopt::Long::Parser
config => [...configuration options...];
For thread safety, each method call will acquire an
exclusive lock to the Getopt::Long module. So don't call
these methods from a callback routine!
Documentation and help texts
Getopt::Long encourages the use of Pod::Usage to produce
help messages. For example:
use Getopt::Long;
use Pod::Usage;
my $man = 0;
my $help = 0;
GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
pod2usage(1) if $help;
pod2usage(-exitstatus => 0, -verbose => 2) if $man;
__END__
=head1 NAME
sample - Using GetOpt::Long and Pod::Usage
=head1 SYNOPSIS
sample [options] [file ...]
Options:
-help brief help message
-man full documentation
=head1 OPTIONS
=over 8
=item B<-help>
Print a brief help message and exits.
=item B<-man>
Prints the manual page and exits.
=back
=head1 DESCRIPTION
B<This program> will read the given input file(s) and do someting
useful with the contents thereof.
=cut
See the Pod::Usage manpage for details.
Storing options in a hash
Sometimes, for example when there are a lot of options,
having a separate variable for each of them can be cumber
some. GetOptions() supports, as an alternative mechanism,
storing options in a hash.
To obtain this, a reference to a hash must be passed as
the first argument to GetOptions(). For each option that
is specified on the command line, the option value will be
stored in the hash with the option name as key. Options
that are not actually used on the command line will not be
put in the hash, on other words, "exists($h{option})" (or
defined()) can be used to test if an option was used. The
drawback is that warnings will be issued if the program
runs under "use strict" and uses "$h{option}" without
testing with exists() or defined() first.
my %h = ();
GetOptions (\%h, 'length=i'); # will store in $h{length}
For options that take list or hash values, it is necessary
to indicate this by appending an "@" or "%" sign after the
type:
GetOptions (\%h, 'colours=s@'); # will push to @{$h{colours}}
To make things more complicated, the hash may contain ref
erences to the actual destinations, for example:
my $len = 0;
my %h = ('length' => \$len);
GetOptions (\%h, 'length=i'); # will store in $len
This example is fully equivalent with:
my $len = 0;
GetOptions ('length=i' => \$len); # will store in $len
Any mixture is possible. For example, the most frequently
used options could be stored in variables while all other
options get stored in the hash:
my $verbose = 0; # frequently referred
my $debug = 0; # frequently referred
my %h = ('verbose' => \$verbose, 'debug' => \$debug);
GetOptions (\%h, 'verbose', 'debug', 'filter', 'size=i');
if ( $verbose ) { ... }
if ( exists $h{filter} ) { ... option 'filter' was specified ... }
Bundling
With bundling it is possible to set several single-charac
ter options at once. For example if "a", "v" and "x" are
all valid options,
-vax
would set all three.
Getopt::Long supports two levels of bundling. To enable
bundling, a call to Getopt::Long::Configure is required.
The first level of bundling can be enabled with:
Getopt::Long::Configure ("bundling");
Configured this way, single-character options can be bun
dled but long options must always start with a double dash
"--" to avoid abiguity. For example, when "vax", "a", "v"
and "x" are all valid options,
-vax
would set "a", "v" and "x", but
--vax
would set "vax".
The second level of bundling lifts this restriction. It
can be enabled with:
Getopt::Long::Configure ("bundling_override");
Now, "-vax" would set the option "vax".
When any level of bundling is enabled, option values may
be inserted in the bundle. For example:
-h24w80
is equivalent to
-h 24 -w 80
When configured for bundling, single-character options are
matched case sensitive while long options are matched case
insensitive. To have the single-character options matched
case insensitive as well, use:
Getopt::Long::Configure ("bundling", "ignorecase_always");
It goes without saying that bundling can be quite confus
ing.
The lonesome dash
Normally, a lone dash "-" on the command line will not be
considered an option. Option processing will terminate
(unless "permute" is configured) and the dash will be left
in "@ARGV".
It is possible to get special treatment for a lone dash.
This can be achieved by adding an option specification
with an empty name, for example:
GetOptions ('' => \$stdio);
A lone dash on the command line will now be a legal
option, and using it will set variable "$stdio".
Argument call-back
A special option 'name' "<"> can be used to designate a
subroutine to handle non-option arguments. When GetOp_
tions() encounters an argument that does not look like an
option, it will immediately call this subroutine and
passes it the argument as a parameter.
For example:
my $width = 80;
sub process { ... }
GetOptions ('width=i' => \$width, '<>' => \&process);
When applied to the following command line:
arg1 --width=72 arg2 --width=60 arg3
This will call "process("arg1")" while "$width" is "80",
"process("arg2")" while "$width" is "72", and
"process("arg3")" while "$width" is "60".
This feature requires configuration option permute, see
section the Configuring Getopt::Long entry elsewhere in
this document.
Configuring Getopt::LongGetopt::Long can be configured by calling subroutine
Getopt::Long::Configure(). This subroutine takes a list of
quoted strings, each specifying a configuration option to
be enabled, e.g. "ignore_case", or disabled, e.g.
"no_ignore_case". Case does not matter. Multiple calls to
Configure() are possible.
Alternatively, as of version 2.24, the configuration
options may be passed together with the "use" statement:
use Getopt::Long qw(:config no_ignore_case bundling);
The following options are available:
default This option causes all configuration options
to be reset to their default values.
posix_default
This option causes all configuration options
to be reset to their default values as if the
environment variable POSIXLY_CORRECT had been
set.
auto_abbrev Allow option names to be abbreviated to
uniqueness. Default is enabled unless envi
ronment variable POSIXLY_CORRECT has been set,
in which case "auto_abbrev" is disabled.
getopt_compat
Allow "+" to start options. Default is
enabled unless environment variable
POSIXLY_CORRECT has been set, in which case
"getopt_compat" is disabled.
gnu_compat "gnu_compat" controls whether "--opt=" is
allowed, and what it should do. Without
"gnu_compat", "--opt=" gives an error. With
"gnu_compat", "--opt=" will give option "opt"
and empty value. This is the way GNU
getopt_long() does it.
gnu_getopt This is a short way of setting "gnu_compat"
"bundling" "permute" "no_getopt_compat". With
"gnu_getopt", command line handling should be
fully compatible with GNU getopt_long().
require_order
Whether command line arguments are allowed to
be mixed with options. Default is disabled
unless environment variable POSIXLY_CORRECT
has been set, in which case "require_order" is
enabled.
See also "permute", which is the opposite of
"require_order".
permute Whether command line arguments are allowed to
be mixed with options. Default is enabled
unless environment variable POSIXLY_CORRECT
has been set, in which case "permute" is dis
abled. Note that "permute" is the opposite of
"require_order".
If "permute" is enabled, this means that
--foo arg1 --bar arg2 arg3
is equivalent to
--foo --bar arg1 arg2 arg3
If an argument call-back routine is specified,
"@ARGV" will always be empty upon succesful
return of GetOptions() since all options have
been processed. The only exception is when
"--" is used:
--foo arg1 --bar arg2 -- arg3
will call the call-back routine for arg1 and
arg2, and terminate GetOptions() leaving
""arg2"" in "@ARGV".
If "require_order" is enabled, options pro
cessing terminates when the first non-option
is encountered.
--foo arg1 --bar arg2 arg3
is equivalent to
--foo -- arg1 --bar arg2 arg3
If "pass_through" is also enabled, options
processing will terminate at the first unrec
ognized option, or non-option, whichever comes
first.
bundling (default: disabled)
Enabling this option will allow single-charac
ter options to be bundled. To distinguish
bundles from long option names, long options
must be introduced with "--" and single-char
acter options (and bundles) with "-".
Note: disabling "bundling" also disables
"bundling_override".
bundling_override (default: disabled)
If "bundling_override" is enabled, bundling is
enabled as with "bundling" but now long option
names override option bundles.
Note: disabling "bundling_override" also dis
ables "bundling".
Note: Using option bundling can easily lead to
unexpected results, especially when mixing
long options and bundles. Caveat emptor.
ignore_case (default: enabled)
If enabled, case is ignored when matching long
option names. Single character options will be
treated case-sensitive.
Note: disabling "ignore_case" also disables
"ignore_case_always".
ignore_case_always (default: disabled)
When bundling is in effect, case is ignored on
single-character options also.
Note: disabling "ignore_case_always" also dis
ables "ignore_case".
pass_through (default: disabled)
Options that are unknown, ambiguous or sup
plied with an invalid option value are passed
through in "@ARGV" instead of being flagged as
errors. This makes it possible to write wrap
per scripts that process only part of the user
supplied command line arguments, and pass the
remaining options to some other program.
If "require_order" is enabled, options pro
cessing will terminate at the first unrecog
nized option, or non-option, whichever comes
first. However, if "permute" is enabled
instead, results can become confusing.
prefix The string that starts options. If a constant
string is not sufficient, see "prefix_pat
tern".
prefix_pattern
A Perl pattern that identifies the strings
that introduce options. Default is
"(--|-|\+)" unless environment variable
POSIXLY_CORRECT has been set, in which case it
is "(--|-)".
debug (default: disabled)
Enable debugging output.
Return values and Errors
Configuration errors and errors in the option definitions
are signalled using die() and will terminate the calling
program unless the call to Getopt::Long::GetOptions() was
embedded in "eval { ... }", or die() was trapped using
"$SIG{__DIE__}".
GetOptions returns true to indicate success. It returns
false when the function detected one or more errors during
option parsing. These errors are signalled using warn()
and can be trapped with "$SIG{__WARN__}".
Errors that can't happen are signalled using
Carp::croak().
Legacy
The earliest development of "newgetopt.pl" started in
1990, with Perl version 4. As a result, its development,
and the development of Getopt::Long, has gone through sev
eral stages. Since backward compatibility has always been
extremely important, the current version of Getopt::Long
still supports a lot of constructs that nowadays are no
longer necessary or otherwise unwanted. This section
describes briefly some of these 'features'.
Default destinations
When no destination is specified for an option, GetOptions
will store the resultant value in a global variable named
"opt_"XXX, where XXX is the primary name of this option.
When a progam executes under "use strict" (recommended),
these variables must be pre-declared with our() or "use
vars".
our $opt_length = 0;
GetOptions ('length=i'); # will store in $opt_length
To yield a usable Perl variable, characters that are not
part of the syntax for variables are translated to under
scores. For example, "--fpp-struct-return" will set the
variable "$opt_fpp_struct_return". Note that this variable
resides in the namespace of the calling program, not nec
essarily "main". For example:
GetOptions ("size=i", "sizes=i@");
with command line "-size 10 -sizes 24 -sizes 48" will per
form the equivalent of the assignments
$opt_size = 10;
@opt_sizes = (24, 48);
Alternative option starters
A string of alternative option starter characters may be
passed as the first argument (or the first argument after
a leading hash reference argument).
my $len = 0;
GetOptions ('/', 'length=i' => $len);
Now the command line may look like:
/length 24 -- arg
Note that to terminate options processing still requires a
double dash "--".
GetOptions() will not interpret a leading ""<>"" as option
starters if the next argument is a reference. To force
""<"" and "">"" as option starters, use ""><"". Confusing?
Well, using a starter argument is strongly deprecated any
way.
Configuration variables
Previous versions of Getopt::Long used variables for the
purpose of configuring. Although manipulating these vari
ables still work, it is strongly encouraged to use the
"Configure" routine that was introduced in version 2.17.
Besides, it is much easier.
Trouble Shooting
Warning: Ignoring '!' modifier for short option
This warning is issued when the '!' modifier is applied to
a short (one-character) option and bundling is in effect.
E.g.,
Getopt::Long::Configure("bundling");
GetOptions("foo|f!" => \$foo);
Note that older Getopt::Long versions did not issue a
warning, because the '!' modifier was applied to the first
name only. This bug was fixed in 2.22.
Solution: separate the long and short names and apply the
'!' to the long names only, e.g.,
GetOptions("foo!" => \$foo, "f" => \$foo);
GetOptions does not return a false result when an option
is not supplied
That's why they're called 'options'.
AUTHOR
Johan Vromans <jvromans@squirrel.nl>
COPYRIGHT AND DISCLAIMER
This program is Copyright 2000,1990 by Johan Vromans.
This program is free software; you can redistribute it
and/or modify it under the terms of the Perl Artistic
License or the GNU General Public License as published by
the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more
details.
If you do not have a copy of the GNU General Public
License write to the Free Software Foundation, Inc., 675
Mass Ave, Cambridge, MA 02139, USA.
2001-02-22 perl v5.6.1 Getopt::Long(3)
