APM(8) OpenBSD System Manager's Manual APM(8)NAME
apm - Advanced Power Management control program
SYNOPSISzzz [-Sz] [-f sockname]
apm [-AabCHLlmPSvz] [-f sockname]
DESCRIPTION
apm communicates with the Advanced Power Management daemon, apmd(8),
making requests of it for current power status or to place the system
into a suspend or stand-by state. With no flags, apm displays the
current power management state in verbose form.
The options are as follows:
-A Set apmd(8) to automatic performance adjustment mode. In this
mode, when CPU idle time falls below 10%, or if the AC power is
connected and the battery is more than 15% charged, apm raises
hw.setperf to 100. Otherwise when CPU idle time is above 30% and
the system is running on battery power, apm lowers hw.setperf as
much as possible to reduce power consumption.
-a Display the external charger (A/C status). 0 means disconnected,
1 means connected, 2 means backup power source, and 255 means
unknown.
-b Display the battery status. 0 means high, 1 means low, 2 means
critical, 3 means charging, 4 means absent, and 255 means
unknown.
-C Set apmd(8) to cool running performance adjustment mode. In this
mode, when CPU idle time falls below 10%, apm raises hw.setperf
as much as necessary. Otherwise when CPU idle time is above 30%,
apm lowers hw.setperf as much as possible to reduce heat, noise,
and power consumption.
-f sockname
Set the name of the socket via which to contact apmd(8) to
sockname.
-H Set apmd(8) to manual performance adjustment mode and hw.setperf
to 100.
-L Set apmd(8) to manual performance adjustment mode and hw.setperf
to 0.
-l Display the estimated battery lifetime (in percent).
-m Display the estimated battery lifetime (in minutes).
-P Display the performance adjustment mode. 0 means manual mode, 1
means automatic mode, and 2 means cool running mode.
-S Put the system into stand-by (light sleep) state.
-v Request more verbose description of the displayed states.
-z Put the system into suspend (deep sleep) state.
The zzz variant of this command is an alternative for suspending the
system. With no arguments, zzz places the system into suspend state.
The command line flags serve the same purpose as for the apm variant of
this command.
This command does not wait for positive confirmation that the requested
state has been entered; to do so would mean the command does not return
until the system resumes from its sleep state.
FILES
/var/run/apmdev default UNIX-domain socket for communicating with
apmd(8)
The -f flag may be used to specify an alternate socket name. The
protection modes on this socket govern which users may access the APM
functions.
SEE ALSOapm(4), apmd(8)
Advanced Power Management (APM) BIOS Interface Specification (revision
1.2), Intel Corporation and Microsoft Corporation
HISTORY
The apm command appeared in NetBSD 1.3, OpenBSD support was added in
OpenBSD 1.2.
OpenBSD 4.9 September 19, 2010 OpenBSD 4.9