zppsvx(3P) Sun Performance Library zppsvx(3P)NAMEzppsvx - use the Cholesky factorization A = U**H*U or A = L*L**H to
compute the solution to a complex system of linear equations A * X =
B,
SYNOPSIS
SUBROUTINE ZPPSVX(FACT, UPLO, N, NRHS, A, AF, EQUED, S, B, LDB,
X, LDX, RCOND, FERR, BERR, WORK, WORK2, INFO)
CHARACTER * 1 FACT, UPLO, EQUED
DOUBLE COMPLEX A(*), AF(*), B(LDB,*), X(LDX,*), WORK(*)
INTEGER N, NRHS, LDB, LDX, INFO
DOUBLE PRECISION RCOND
DOUBLE PRECISION S(*), FERR(*), BERR(*), WORK2(*)
SUBROUTINE ZPPSVX_64(FACT, UPLO, N, NRHS, A, AF, EQUED, S, B,
LDB, X, LDX, RCOND, FERR, BERR, WORK, WORK2, INFO)
CHARACTER * 1 FACT, UPLO, EQUED
DOUBLE COMPLEX A(*), AF(*), B(LDB,*), X(LDX,*), WORK(*)
INTEGER*8 N, NRHS, LDB, LDX, INFO
DOUBLE PRECISION RCOND
DOUBLE PRECISION S(*), FERR(*), BERR(*), WORK2(*)
F95 INTERFACE
SUBROUTINE PPSVX(FACT, UPLO, [N], [NRHS], A, AF, EQUED, S, B,
[LDB], X, [LDX], RCOND, FERR, BERR, [WORK], [WORK2], [INFO])
CHARACTER(LEN=1) :: FACT, UPLO, EQUED
COMPLEX(8), DIMENSION(:) :: A, AF, WORK
COMPLEX(8), DIMENSION(:,:) :: B, X
INTEGER :: N, NRHS, LDB, LDX, INFO
REAL(8) :: RCOND
REAL(8), DIMENSION(:) :: S, FERR, BERR, WORK2
SUBROUTINE PPSVX_64(FACT, UPLO, [N], [NRHS], A, AF, EQUED, S, B,
[LDB], X, [LDX], RCOND, FERR, BERR, [WORK], [WORK2], [INFO])
CHARACTER(LEN=1) :: FACT, UPLO, EQUED
COMPLEX(8), DIMENSION(:) :: A, AF, WORK
COMPLEX(8), DIMENSION(:,:) :: B, X
INTEGER(8) :: N, NRHS, LDB, LDX, INFO
REAL(8) :: RCOND
REAL(8), DIMENSION(:) :: S, FERR, BERR, WORK2
C INTERFACE
#include <sunperf.h>
void zppsvx(char fact, char uplo, int n, int nrhs, doublecomplex *a,
doublecomplex *af, char *equed, double *s, doublecomplex *b,
int ldb, doublecomplex *x, int ldx, double *rcond, double
*ferr, double *berr, int *info);
void zppsvx_64(char fact, char uplo, long n, long nrhs, doublecomplex
*a, doublecomplex *af, char *equed, double *s, doublecomplex
*b, long ldb, doublecomplex *x, long ldx, double *rcond, dou‐
ble *ferr, double *berr, long *info);
PURPOSEzppsvx uses the Cholesky factorization A = U**H*U or A = L*L**H to com‐
pute the solution to a complex system of linear equations
A * X = B, where A is an N-by-N Hermitian positive definite matrix
stored in packed format and X and B are N-by-NRHS matrices.
Error bounds on the solution and a condition estimate are also pro‐
vided.
The following steps are performed:
1. If FACT = 'E', real scaling factors are computed to equilibrate
the system:
diag(S) * A * diag(S) * inv(diag(S)) * X = diag(S) * B
Whether or not the system will be equilibrated depends on the
scaling of the matrix A, but if equilibration is used, A is
overwritten by diag(S)*A*diag(S) and B by diag(S)*B.
2. If FACT = 'N' or 'E', the Cholesky decomposition is used to
factor the matrix A (after equilibration if FACT = 'E') as
A = U'* U , if UPLO = 'U', or
A = L * L', if UPLO = 'L',
where U is an upper triangular matrix, L is a lower triangular
matrix, and ' indicates conjugate transpose.
3. If the leading i-by-i principal minor is not positive definite,
then the routine returns with INFO = i. Otherwise, the factored
form of A is used to estimate the condition number of the matrix
A. If the reciprocal of the condition number is less than machine
precision, INFO = N+1 is returned as a warning, but the routine
still goes on to solve for X and compute error bounds as
described below.
4. The system of equations is solved for X using the factored form
of A.
5. Iterative refinement is applied to improve the computed solution
matrix and calculate error bounds and backward error estimates
for it.
6. If equilibration was used, the matrix X is premultiplied by
diag(S) so that it solves the original system before
equilibration.
ARGUMENTS
FACT (input)
Specifies whether or not the factored form of the matrix A is
supplied on entry, and if not, whether the matrix A should be
equilibrated before it is factored. = 'F': On entry, AF
contains the factored form of A. If EQUED = 'Y', the matrix
A has been equilibrated with scaling factors given by S. A
and AF will not be modified. = 'N': The matrix A will be
copied to AF and factored.
= 'E': The matrix A will be equilibrated if necessary, then
copied to AF and factored.
UPLO (input)
= 'U': Upper triangle of A is stored;
= 'L': Lower triangle of A is stored.
N (input) The number of linear equations, i.e., the order of the matrix
A. N >= 0.
NRHS (input)
The number of right hand sides, i.e., the number of columns
of the matrices B and X. NRHS >= 0.
A (input/output) COMPLEX*16 array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the Hermitian matrix
A, packed columnwise in a linear array, except if FACT = 'F'
and EQUED = 'Y', then A must contain the equilibrated matrix
diag(S)*A*diag(S). The j-th column of A is stored in the
array A as follows: if UPLO = 'U', A(i + (j-1)*j/2) = A(i,j)
for 1<=i<=j; if UPLO = 'L', A(i + (j-1)*(2n-j)/2) = A(i,j)
for j<=i<=n. See below for further details. A is not modi‐
fied if FACT = 'F' or 'N', or if FACT = 'E' and EQUED = 'N'
on exit.
On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by
diag(S)*A*diag(S).
AF (input or output) COMPLEX*16 array, dimension (N*(N+1)/2)
If FACT = 'F', then AF is an input argument and on entry con‐
tains the triangular factor U or L from the Cholesky factor‐
ization A = U**H*U or A = L*L**H, in the same storage format
as A. If EQUED .ne. 'N', then AF is the factored form of the
equilibrated matrix A.
If FACT = 'N', then AF is an output argument and on exit
returns the triangular factor U or L from the Cholesky fac‐
torization A = U**H*U or A = L*L**H of the original matrix A.
If FACT = 'E', then AF is an output argument and on exit
returns the triangular factor U or L from the Cholesky fac‐
torization A = U**H*U or A = L*L**H of the equilibrated
matrix A (see the description of A for the form of the equi‐
librated matrix).
EQUED (input or output)
Specifies the form of equilibration that was done. = 'N':
No equilibration (always true if FACT = 'N').
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S). EQUED is an input argument if FACT =
'F'; otherwise, it is an output argument.
S (input or output) DOUBLE PRECISION array, dimension (N)
The scale factors for A; not accessed if EQUED = 'N'. S is
an input argument if FACT = 'F'; otherwise, S is an output
argument. If FACT = 'F' and EQUED = 'Y', each element of S
must be positive.
B (input/output) COMPLEX*16 array, dimension (LDB,NRHS)
On entry, the N-by-NRHS right hand side matrix B. On exit,
if EQUED = 'N', B is not modified; if EQUED = 'Y', B is over‐
written by diag(S) * B.
LDB (input)
The leading dimension of the array B. LDB >= max(1,N).
X (output) COMPLEX*16 array, dimension (LDX,NRHS)
If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X to
the original system of equations. Note that if EQUED = 'Y',
A and B are modified on exit, and the solution to the equili‐
brated system is inv(diag(S))*X.
LDX (input)
The leading dimension of the array X. LDX >= max(1,N).
RCOND (output)
The estimate of the reciprocal condition number of the matrix
A after equilibration (if done). If RCOND is less than the
machine precision (in particular, if RCOND = 0), the matrix
is singular to working precision. This condition is indi‐
cated by a return code of INFO > 0.
FERR (output) DOUBLE PRECISION array, dimension (NRHS)
The estimated forward error bound for each solution vector
X(j) (the j-th column of the solution matrix X). If XTRUE is
the true solution corresponding to X(j), FERR(j) is an esti‐
mated upper bound for the magnitude of the largest element in
(X(j) - XTRUE) divided by the magnitude of the largest ele‐
ment in X(j). The estimate is as reliable as the estimate
for RCOND, and is almost always a slight overestimate of the
true error.
BERR (output) DOUBLE PRECISION array, dimension (NRHS)
The componentwise relative backward error of each solution
vector X(j) (i.e., the smallest relative change in any ele‐
ment of A or B that makes X(j) an exact solution).
WORK (workspace)
COMPLEX*16 array, dimension(2*N)
WORK2 (workspace)
DOUBLE PRECISION array, dimension(N)
INFO (output)
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value
> 0: if INFO = i, and i is
<= N: the leading minor of order i of A is not positive def‐
inite, so the factorization could not be completed, and the
solution has not been computed. RCOND = 0 is returned. =
N+1: U is nonsingular, but RCOND is less than machine preci‐
sion, meaning that the matrix is singular to working preci‐
sion. Nevertheless, the solution and error bounds are com‐
puted because there are a number of situations where the com‐
puted solution can be more accurate than the value of RCOND
would suggest.
FURTHER DETAILS
The packed storage scheme is illustrated by the following example when
N = 4, UPLO = 'U':
Two-dimensional storage of the Hermitian matrix A:
a11 a12 a13 a14
a22 a23 a24
a33 a34 (aij = conjg(aji))
a44
Packed storage of the upper triangle of A:
A = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
6 Mar 2009 zppsvx(3P)
