yge(7D) Devices yge(7D)NAMEyge - Marvell Yukon 2 Ethernet device driver
SYNOPSIS
/dev/net/yge
DESCRIPTION
The yge driver supports Marvell Yukon 2 Fast Ethernet and Gigabit Eth‐
ernet controllers.
Properties
The following properties can be configured using dladm(1M):
adv_autoneg_cap Enables (default) or disables IEEE 802.3 auto-nego‐
tiation of link speed and duplex settings. If
enabled, the device negotiates among the supported
(and configured, see below) link options with the
link partner. If disabled, at least one of the link
options below must be specified. The driver selects
the first enabled link option according to the IEEE
802.3 specified preferences.
adv_1000fdx_cap Enables the 1000 Mbps full-duplex link option.
adv_1000hdx_cap Enables the 1000 Mbps half-duplex link option.
adv_100T4_cap Enables the 100 BaseT4 link option. (Note that most
hardware does not support this unusual link style.
Also, this uses two pairs of wires for data, rather
than one.)
adv_100fdx_cap Enables the 1000 Mbps full-duplex link option.
adv_100hdx_cap Enables the 1000 Mbps half-duplex link option.
adv_10fdx_cap Enables the 10 Base-T full-duplex link option.
adv_10hdx_cap Enables the 10 Base-T half-duplex link option.
mtu On most devices, can be set between 1500 (default)
and 9000. This property can only be changed when the
device is not in use.
FILES
/dev/net/yge Special network device
/kernel/drv/yge 32-bit driver binary (x86)
/kernel/drv/amd64/yge 64-bit driver binary (x86)
/kernel/drv/sparcv9/yge 64-bit driver binary (SPARC)
ATTRIBUTES
See attributes(5) for a descriptions of the following attributes:
┌────────────────────┬───────────────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├────────────────────┼───────────────────────────────────────┤
│Architecture │ x86, SPARC │
├────────────────────┼───────────────────────────────────────┤
│Interface Stability │ Committed │
└────────────────────┴───────────────────────────────────────┘
SEE ALSOdladm(1M), attributes(5), dlpi(7P)SunOS 5.11 15 Sep 2009 yge(7D)