xscreensaver-demo man page on SunOS
[printable version]
XScreenSaver(1) XScreenSaver(1)
NAME
xscreensaver-demo - interactively control the background xscreensaver
daemon
SYNOPSIS
xscreensaver-demo [-display host:display.screen] [-prefs] [--crapplet]
[--debug]
DESCRIPTION
The xscreensaver-demo program is a graphical front-end for setting the
parameters used by the background xscreensaver(1) daemon. It is essen‐
tially two things: a tool for editing the ~/.xscreensaver file; and a
tool for demoing the various graphics hacks that the xscreensaver dae‐
mon will launch.
The main window consists of a menu bar and two tabbed pages. The first
page is for editing the list of demos, and the second is for editing
various other parameters of the screensaver.
MENU COMMANDS
All of these commands are on either the File or Help menus:
Blank Screen Now
Activates the background xscreensaver daemon, which will then run a
demo at random. This is the same as running xscreensaver-com‐
mand(1) with the -activate option.
Lock Screen Now
Just like Blank Screen Now, except the screen will be locked as
well (even if it is not configured to lock all the time.) This is
the same as running xscreensaver-command(1) with the -lock option.
Kill Daemon
If the xscreensaver daemon is running on this screen, kill it.
This is the same as running xscreensaver-command(1) with the -exit
option.
Restart Daemon
If the xscreensaver daemon is running on this screen, kill it.
Then launch it again. This is the same as doing ``xscreensaver-
command -exit'' followed by ``xscreensaver''.
Note that it is not the same as doing ``xscreensaver-command
-restart''.
Exit
Exits the xscreensaver-demo program (this program) without affect‐
ing the background xscreensaver daemon, if any.
About...
Displays the version number of this program, xscreensaver-demo.
Documentation...
Opens up a web browser looking at the XScreenSaver web page, where
you can find online copies of the xscreensaver(1), xscreen‐
saver-demo(1), and xscreensaver-command(1) manuals.
DISPLAY MODES TAB
This page contains a list of the names of the various display modes, a
preview area, and some fields that let you configure screen saver
behavior.
Mode
This option menu controls the behavior of the screen saver. The
options are:
Random Screen Saver
When blanking the screen, select a random display mode
from among those that are enabled and applicable. This
is the default.
Only One Screen Saver
When blanking the screen, only ever use one particular
display mode (the one selected in the list.)
Blank Screen Only
When blanking the screen, just go black: don't run any
graphics hacks.
Disable Screen Saver
Don't ever blank the screen, and don't ever allow the
monitor to power down.
Demo List
Double-clicking in the list on the left will let you try out the
indicated demo. The screen will go black, and the program will run
in full-screen mode, just as it would if the xscreensaver daemon
had launched it. Clicking the mouse again will stop the demo and
un-blank the screen, making the dialog box visible again.
Single-clicking in the list will run it in the small preview pane
on the right. (But beware: many of the display modes behave some‐
what differently when running in full-screen mode, so the scaled-
down view might not give an accurate impression.)
When Mode is set to Random Screen Saver, each name in the list has
a checkbox next to it: this controls whether this display mode is
enabled. If it is unchecked, then that mode will not be chosen.
(Though you can still run it explicitly by double-clicking on its
name.)
Arrow Buttons
Beneath the list are a pair of up and down arrows. Clicking on the
down arrow will select the next item in the list, and then run it
in full-screen mode, just as if you had double-clicked on it. The
up arrow goes the other way. This is just a shortcut for trying
out all of the display modes in turn.
Blank After
After the user has been idle this long, the xscreensaver daemon
will blank the screen.
Cycle After
jAfter the screensaver has been running for this long, the cur‐
rently running graphics demo will be killed, and a new one started.
If this is 0, then the graphics demo will never be changed: only
one demo will run until the screensaver is deactivated by user
activity.
Lock Screen
When this is checked, the screen will be locked when it activates.
Lock Screen After
This controls the length of the ``grace period'' between when the
screensaver activates, and when the screen becomes locked. For
example, if this is 5 minutes, and Blank After is 10 minutes, then
after 10 minutes, the screen would blank. If there was user activ‐
ity at 12 minutes, no password would be required to un-blank the
screen. But, if there was user activity at 15 minutes or later
(that is, Lock Screen After minutes after activation) then a pass‐
word would be required. The default is 0, meaning that if locking
is enabled, then a password will be required as soon as the screen
blanks.
Preview
This button, below the small preview window, runs the demo in full-
screen mode so that you can try it out. This is the same thing
that happens when you double-click an element in the list. Click
the mouse to dismiss the full-screen preview.
Settings
This button will pop up a dialog where you can configure settings
specific to the display mode selected in the list.
ADVANCED TAB
This tab lets you change various settings used by the xscreensaver dae‐
mon itself, rather than its sub-programs.
Grab Desktop Images
Some of the graphics hacks manipulate images. If this option is
selected, then they are allowed to manipulate the desktop image,
that is, a display mode might draw a picture of your desktop melt‐
ing, or being distorted in some way. The security-paranoid might
want to disable this option, because if it is set, it means that
the windows on your desktop will occasionally be visible while your
screen is locked. Others will not be able to do anything, but they
may be able to see whatever you left on your screen.
Grab Video Frames
If your system has a video capture card, selecting this option will
allow the image-manipulating modes to capture a frame of video to
operate on.
Choose Random Image
If this option is set, then the image-manipulating modes will
select a random image file from disk, from the directory you spec‐
ify in the text entry field. That directory will be recursively
searched for files, and it is assumed that all the files under that
directory are images.
If more than one of these options are selected, then one will be
chosen at random. If none of them are selected, then an image of
video colorbars will be used instead.
(All three of these options work by invoking the xscreen‐
saver-getimage(1) program, which is what actually does the work.)
Verbose Diagnostics
Whether to print lots of debugging information.
Display Subprocess Errors
If this is set, then if one of the graphics demos prints something
to stdout or stderr, it will show up on the screen immediately
(instead of being lost in a hidden terminal or file that you can't
see.)
If you change this option, it will only take effect the next time
the xscreensaver daemon is restarted. (All other settings take
effect immediately.)
Display Splash Screen at Startup
Normally when xscreensaver starts up, it briefly displays a splash
dialog showing the version number, a Help button, etc. If this
option is turned off, the splash screen will not be shown at all.
Power Management Enabled
Whether the monitor should be powered down after a period of inac‐
tivity.
If this option is grayed out, it means your X server does not sup‐
port the XDPMS extension, and so control over the monitor's power
state is not available.
If you're using a laptop, don't be surprised if this has no effect:
many laptops have monitor power-saving behavior built in at a very
low level that is invisible to Unix and X. On such systems, you
can typically only adjust the power-saving delays by changing set‐
tings in the BIOS in some hardware-specific way.
Standby After
If Power Management Enabled is selected, the monitor will go black
after this much idle time. (Graphics demos will stop running,
also.)
Suspend After
If Power Management Enabled is selected, the monitor will go into
power-saving mode after this much idle time. This duration should
be greater than or equal to Standby.
Off After
If Power Management Enabled is selected, the monitor will fully
power down after this much idle time. This duration should be
greater than or equal to Suspend.
Install Colormap
Whether to install a private colormap while the screensaver is
active, so that the graphics hacks can get as many colors as possi‐
ble. (This only applies when the screen's default visual is being
used, since non-default visuals get their own colormaps automati‐
cally.) This can also be overridden on a per-demo basis.
Fade To Black When Blanking
If selected, then when the screensaver activates, the current con‐
tents of the screen will fade to black instead of simply winking
out. (Note: this doesn't work with all X servers.) A fade will
also be done when switching graphics hacks (when the Cycle After
expires.)
Unfade From Black When Unblanking
The complement to Fade Colormap: if selected, then when the screen‐
saver deactivates, the original contents of the screen will fade in
from black instead of appearing immediately. This is only done if
Fade Colormap is also selected.
Fade Duration
When fading or unfading are selected, this controls how long the
fade will take.
There are more settings than these available, but these are the most
commonly used ones; see the manual for xscreensaver(1) for other param‐
eters that can be set by editing the ~/.xscreensaver file, or the X
resource database.
SETTINGS DIALOG
When you click on the Settings button on the Display Modes tab, a con‐
figuration dialog will pop up that lets you customize settings of the
selected display mode. Each display mode has its own custom configura‐
tion controls on the left side.
On the right side is a paragraph or two describing the display mode.
Below that is a Documentation button that will display the display
mode's manual page, if it has one, in a new window (since each of the
display modes is actually a separate program, they each may have their
own manual.)
The Advanced button reconfigures the dialog box so that you can edit
the display mode's command line directly, instead of using the graphi‐
cal controls. It also lets you configure the X visual type that this
mode will require. If you specify one (other than Any) then the pro‐
gram will only be run on that kind of visual. For example, you can
specify that a particular program should only be run if color is avail‐
able, and another should only be run in monochrome. See the discussion
of the programs parameter in the Configuration section of the xscreen‐
saver(1) manual.
COMMAND-LINE OPTIONS
xscreensaver-demo accepts the following command line options.
-display host:display.screen
The X display to use. The xscreensaver-demo program will open
its window on that display, and also control the xscreensaver
daemon that is managing that same display.
-prefs Start up with the Advanced tab selected by default instead of
the Display Modes tab.
-crapplet
For use by the Gnome Control Center code: this causes this pro‐
gram to be embedded inside the Control Center window.
-debug Causes lots of diagnostics to be printed on stderr.
It is important that the xscreensaver and xscreensaver-demo processes
be running on the same machine, or at least, on two machines that share
a file system. When xscreensaver-demo writes a new version of the
~/.xscreensaver file, it's important that the xscreensaver see that
same file. If the two processes are seeing different ~/.xscreensaver
files, things will malfunction.
ENVIRONMENT
DISPLAY to get the default host and display number.
PATH to find the sub-programs to run. However, note that the sub-
programs are actually launched by the xscreensaver daemon, not
by xscreensaver-demo itself. So, what matters is what $PATH
the xscreensaver program sees.
HOME for the directory in which to read and write the .xscreensaver
file.
XENVIRONMENT
to get the name of a resource file that overrides the global
resources stored in the RESOURCE_MANAGER property.
UPGRADES
The latest version can always be found at http://www.jwz.org/xscreen‐
saver/
SEE ALSO
X(1), xscreensaver(1), xscreensaver-command(1), xscreensaver-getim‐
age(1)
COPYRIGHT
Copyright © 1992, 1993, 1997, 1998, 1999, 2000, 2001, 2002 by Jamie
Zawinski. Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted with‐
out fee, provided that the above copyright notice appear in all copies
and that both that copyright notice and this permission notice appear
in supporting documentation. No representations are made about the
suitability of this software for any purpose. It is provided "as is"
without express or implied warranty.
AUTHOR
Jamie Zawinski <jwz@jwz.org>, 13-aug-92.
Please let me know if you find any bugs or make any improvements.
X Version 11 11-Jun-2002 (4.05) XScreenSaver(1)
[top]
List of man pages available for SunOS
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
|
Vote for polarhome
|
