UPERF(4) OpenBSD Programmer's Manual (SPARC64) UPERF(4)NAMEuperf - performance counters driver
SYNOPSIS
uperf* at ebus?
uperf* at sbus?
DESCRIPTION
Some UltraSPARC host bridges provide performance counters on their host
bridges. The counters are a part of the system controller chip (usc,
dsc, or qsc). On PCI machines the system controller shows up as a device
on the EBus, but on SBus machines the system controller exists in SBus
space. The uperf driver provides access to these counters via ioctl(2).
IOCTLS
All of the ioctl calls supported by the uperf driver take the following
structure as an argument:
struct uperf_io {
int cnt_flags;
int cnt_src0;
int cnt_src1;
u_int32_t cnt_val0;
u_int32_t cnt_val1;
};
The cnt_flags field specifies which counters are being operated on and is
a bit mask of UPERF_CNT0 and/or UPERF_CNT1.
The cnt_src0 and cnt_src1 fields specify the source for the counter. Not
all counters support monitoring all sources and specifying an invalid
source for a counter to monitor will result in an error. The sources are
specified below:
UPERFSRC_SYSCK system clock ticks
UPERFSRC_PRALL all p-requests
UPERFSRC_PRP0 p-requests from processor 0
UPERFSRC_PRU2S p-requests from the U2S
UPERFSRC_UPA128 cycles UPA 128 bit data is busy
UPERFSRC_UPA64 cycles UPA 64 bit data is busy
UPERFSRC_PIOS cycles stalled during PIO
UPERFSRC_MEMRI memory requests issued
UPERFSRC_MCBUSY cycles memory controller is busy
UPERFSRC_PXSH stall cycles due to pending transaction
scoreboard hit
UPERFSRC_P0CWMR coherent write miss requests, processor 0
UPERFSRC_P1CWMR coherent write miss requests, processor 1
UPERFSRC_CIT coherent intervention transactions
UPERFSRC_U2SDAT data transactions on U2S
UPERFSRC_CRXI coherent read transactions issued
UPERFSRC_RDP0 read requests, processor 0
UPERFSRC_P0CRMR coherent read misses, processor 0
UPERFSRC_P0PIO PIO accesses, processor 0
UPERFSRC_MEMRC memory requests completed
UPERFSRC_P1RR read requests, processor 1
UPERFSRC_CRMP1 coherent read misses, processor 1
UPERFSRC_PIOP1 PIO accesses, processor 1
UPERFSRC_CWXI coherent write transactions issued
UPERFSRC_RP0 read requests, processor 0
UPERFSRC_SDVRA streaming DVMA read transfers, PCI bus A
UPERFSRC_SDVWA streaming DVMA write transfers, PCI bus A
UPERFSRC_CDVRA consistent DVMA read transfers, PCI bus A
UPERFSRC_CDVWA consistent DVMA write transfers, PCI bus A
UPERFSRC_SBMA streaming buffer misses, PCI bus A
UPERFSRC_DVA DVMA cycles, PCI bus A
UPERFSRC_DVWA words transferred via DVMA, PCI bus A
UPERFSRC_PIOA cycles consumed by PIO, bus A
UPERFSRC_SDVRB streaming DVMA read transfers, PCI bus B
UPERFSRC_SDVWB streaming DVMA write transfers, PCI bus B
UPERFSRC_CDVRB consistent DVMA read transfers, PCI bus B
UPERFSRC_CDVWB consistent DVMA write transfers, PCI bus B
UPERFSRC_SBMB streaming buffer misses, PCI bus B
UPERFSRC_DVB DVMA cycles, PCI bus B
UPERFSRC_DVWB words transferred via DVMA, PCI bus B
UPERFSRC_PIOB cycles consumed by PIO, bus B
UPERFSRC_TLBMISS TLB misses
UPERFSRC_NINTRS interrupts
UPERFSRC_INACK interrupt NACKS on UPA
UPERFSRC_PIOR PIO read transfers
UPERFSRC_PIOW PIO write transfers
UPERFSRC_MERGE merge buffer transactions
UPERFSRC_TBLA DMA requests retried due to tablewalks, PCI bus A
UPERFSRC_STCA DMA requests retries due to STC, PCI bus A
UPERFSRC_TBLB DMA requests retries due to tablewalks, PCI bus B
UPERFSRC_STCB DMA requests retries due to STC, PCI bus B
The cnt_val0 and cnt_val1 contain the values fetched for the counters.
Software using this interface should be prepared to handle the counters
rolling over.
The uperf device responds to the following ioctl(2) calls, which are
defined in <dev/sun/uperfio.h>.
UPIO_GCNTSRC (struct uperf_io) Retrieve the source the counters are
monitoring. The cnt_flags is a bit mask for which of the
counters is to be fetched. The result is returned in
cnt_src0 and/or cnt_src1.
UPIO_SCNTSRC (struct uperf_io) Set the source the counters should
monitor. This call also clears the current value of the
counters that are set. The cnt_flags is a bit mask for
which of the counters is to be set. The cnt_src0 and/or
cnt_src1 fields specify the source to be set for the
respective counter.
UPIO_CLRCNT (struct uperf_io) Clear the counters specified in
cnt_flags.
UPIO_GETCNT (struct uperf_io) Retrieve the value for the counters
specified in cnt_flags. The values are returned in
cnt_val0 and/or cnt_val1.
SEE ALSOioctl(2), ebus(4), intro(4), sbus(4)HISTORY
The uperf driver was first supported in OpenBSD 3.1.
AUTHORS
The driver was written by Jason Wright <jason@thought.net>.
OpenBSD 4.9 May 31, 2007 OpenBSD 4.9