STOW.IN(1) User Contributed Perl Documentation STOW.IN(1)NAMEstow - software package installation manager
SYNOPSISstow [ options ] package ...
DESCRIPTION
This manual page describes GNU Stow @VERSION@, a program for managing
the installation of software packages. This is not the definitive
documentation for stow; for that, see the info manual.
Stow is a tool for managing the installation of multiple software
packages in the same run-time directory tree. One historical difficulty
of this task has been the need to administer, upgrade, install, and
remove files in independent packages without confusing them with other
files sharing the same filesystem space. For instance, it is common to
install Perl and Emacs in /usr/local. When one does so, one winds up
(as of Perl 4.036 and Emacs 19.22) with the following files in
/usr/local/man/man1: a2p.1; ctags.1; emacs.1; etags.1; h2ph.1; perl.1;
and s2p.1. Now suppose it's time to uninstall Perl. Which man pages
get removed? Obviously perl.1 is one of them, but it should not be the
administrator's responsibility to memorize the ownership of individual
files by separate packages.
The approach used by Stow is to install each package into its own tree,
then use symbolic links to make it appear as though the files are
installed in the common tree. Administration can be performed in the
package's private tree in isolation from clutter from other packages.
Stow can then be used to update the symbolic links. The structure of
each private tree should reflect the desired structure in the common
tree; i.e. (in the typical case) there should be a bin directory
containing executables, a man/man1 directory containing section 1 man
pages, and so on.
Stow was inspired by Carnegie Mellon's Depot program, but is
substantially simpler and safer. Whereas Depot required database files
to keep things in sync, Stow stores no extra state between runs, so
there's no danger (as there was in Depot) of mangling directories when
file hierarchies don't match the database. Also unlike Depot, Stow will
never delete any files, directories, or links that appear in a Stow
directory (e.g., /usr/local/stow/emacs), so it's always possible to
rebuild the target tree (e.g., /usr/local).
TERMINOLOGY
A "package" is a related collection of files and directories that you
wish to administer as a unit -- e.g., Perl or Emacs -- and that needs
to be installed in a particular directory structure -- e.g., with bin,
lib, and man subdirectories.
A "target directory" is the root of a tree in which one or more
packages wish to appear to be installed. A common, but by no means the
only such location is /usr/local. The examples in this manual page
will use /usr/local as the target directory.
A "stow directory" is the root of a tree containing separate packages
in private subtrees. When Stow runs, it uses the current directory as
the default stow directory. The examples in this manual page will use
/usr/local/stow as the stow directory, so that individual packages will
be, for example, /usr/local/stow/perl and /usr/local/stow/emacs.
An "installation image" is the layout of files and directories required
by a package, relative to the target directory. Thus, the installation
image for Perl includes: a bin directory containing perl and a2p (among
others); an info directory containing Texinfo documentation; a lib/perl
directory containing Perl libraries; and a man/man1 directory
containing man pages.
A "package directory" is the root of a tree containing the installation
image for a particular package. Each package directory must reside in a
stow directory -- e.g., the package directory /usr/local/stow/perl must
reside in the stow directory /usr/local/stow. The "name" of a package
is the name of its directory within the stow directory -- e.g., perl.
Thus, the Perl executable might reside in
/usr/local/stow/perl/bin/perl, where /usr/local is the target
directory, /usr/local/stow is the stow directory, /usr/local/stow/perl
is the package directory, and bin/perl within is part of the
installation image.
A "symlink" is a symbolic link. A symlink can be "relative" or
"absolute". An absolute symlink names a full path; that is, one
starting from /. A relative symlink names a relative path; that is,
one not starting from /. The target of a relative symlink is computed
starting from the symlink's own directory. Stow only creates relative
symlinks.
OPTIONS
The stow directory is assumed to be the value of the "STOW_DIR"
environment variable or if unset the current directory, and the target
directory is assumed to be the parent of the current directory (so it
is typical to execute stow from the directory /usr/local/stow). Each
package given on the command line is the name of a package in the stow
directory (e.g., perl). By default, they are installed into the target
directory (but they can be deleted instead using "-D").
-n
--no
Do not perform any operations that modify the filesystem; merely
show what would happen.
-d DIR
--dir=DIR
Set the stow directory to "DIR" instead of the current directory.
This also has the effect of making the default target directory be
the parent of "DIR".
-t DIR
--target=DIR
Set the target directory to "DIR" instead of the parent of the stow
directory.
-v
--verbose[=N]
Send verbose output to standard error describing what Stow is
doing. Verbosity levels are 0, 1, 2, 3, and 4; 0 is the default.
Using "-v" or "--verbose" increases the verbosity by one; using
`--verbose=N' sets it to N.
-S
--stow
Stow the packages that follow this option into the target
directory. This is the default action and so can be omitted if you
are only stowing packages rather than performing a mixture of
stow/delete/restow actions.
-D
--delete
Unstow the packages that follow this option from the target
directory rather than installing them.
-R
--restow
Restow packages (first unstow, then stow again). This is useful for
pruning obsolete symlinks from the target tree after updating the
software in a package.
--adopt
Warning! This behaviour is specifically intended to alter the
contents of your stow directory. If you do not want that, this
option is not for you.
When stowing, if a target is encountered which already exists but
is a plain file (and hence not owned by any existing stow package),
then normally Stow will register this as a conflict and refuse to
proceed. This option changes that behaviour so that the file is
moved to the same relative place within the package's installation
image within the stow directory, and then stowing proceeds as
before. So effectively, the file becomes adopted by the stow
package, without its contents changing.
--no-folding
Disable folding of newly stowed directories when stowing, and
refolding of newly foldable directories when unstowing.
--ignore=REGEX
Ignore files ending in this Perl regex.
--defer=REGEX
Don't stow files beginning with this Perl regex if the file is
already stowed to another package.
--override=REGEX
Force stowing files beginning with this Perl regex if the file is
already stowed to another package.
-V
--version
Show Stow version number, and exit.
-h
--help
Show Stow command syntax, and exit.
INSTALLING PACKAGES
The default action of Stow is to install a package. This means creating
symlinks in the target tree that point into the package tree. Stow
attempts to do this with as few symlinks as possible; in other words,
if Stow can create a single symlink that points to an entire subtree
within the package tree, it will choose to do that rather than create a
directory in the target tree and populate it with symlinks.
For example, suppose that no packages have yet been installed in
/usr/local; it's completely empty (except for the stow subdirectory, of
course). Now suppose the Perl package is installed. Recall that it
includes the following directories in its installation image: bin;
info; lib/perl; man/man1. Rather than creating the directory
/usr/local/bin and populating it with symlinks to ../stow/perl/bin/perl
and ../stow/perl/bin/a2p (and so on), Stow will create a single
symlink, /usr/local/bin, which points to stow/perl/bin. In this way,
it still works to refer to /usr/local/bin/perl and /usr/local/bin/a2p,
and fewer symlinks have been created. This is called "tree folding",
since an entire subtree is "folded" into a single symlink.
To complete this example, Stow will also create the symlink
/usr/local/info pointing to stow/perl/info; the symlink /usr/local/lib
pointing to stow/perl/lib; and the symlink /usr/local/man pointing to
stow/perl/man.
Now suppose that instead of installing the Perl package into an empty
target tree, the target tree is not empty to begin with. Instead, it
contains several files and directories installed under a different
system-administration philosophy. In particular, /usr/local/bin already
exists and is a directory, as are /usr/local/lib and
/usr/local/man/man1. In this case, Stow will descend into
/usr/local/bin and create symlinks to ../stow/perl/bin/perl and
../stow/perl/bin/a2p (etc.), and it will descend into /usr/local/lib
and create the tree-folding symlink perl pointing to
../stow/perl/lib/perl, and so on. As a rule, Stow only descends as far
as necessary into the target tree when it can create a tree-folding
symlink.
The time often comes when a tree-folding symlink has to be undone
because another package uses one or more of the folded subdirectories
in its installation image. This operation is called "splitting open" a
folded tree. It involves removing the original symlink from the target
tree, creating a true directory in its place, and then populating the
new directory with symlinks to the newly-installed package and to the
old package that used the old symlink. For example, suppose that after
installing Perl into an empty /usr/local, we wish to install Emacs.
Emacs's installation image includes a bin directory containing the
emacs and etags executables, among others. Stow must make these files
appear to be installed in /usr/local/bin, but presently /usr/local/bin
is a symlink to stow/perl/bin. Stow therefore takes the following
steps: the symlink /usr/local/bin is deleted; the directory
/usr/local/bin is created; links are made from /usr/local/bin to
../stow/emacs/bin/emacs and ../stow/emacs/bin/etags; and links are made
from /usr/local/bin to ../stow/perl/bin/perl and ../stow/perl/bin/a2p.
When splitting open a folded tree, Stow makes sure that the symlink it
is about to remove points inside a valid package in the current stow
directory.
Stow will never delete anything that it doesn't own.
Stow "owns" everything living in the target tree that points into a
package in the stow directory. Anything Stow owns, it can recompute if
lost. Note that by this definition, Stow doesn't "own" anything in the
stow directory or in any of the packages.
If Stow needs to create a directory or a symlink in the target tree and
it cannot because that name is already in use and is not owned by Stow,
then a conflict has arisen. See the "Conflicts" section in the info
manual.
DELETING PACKAGES
When the "-D" option is given, the action of Stow is to delete a
package from the target tree. Note that Stow will not delete anything
it doesn't "own". Deleting a package does not mean removing it from the
stow directory or discarding the package tree.
To delete a package, Stow recursively scans the target tree, skipping
over the stow directory (since that is usually a subdirectory of the
target tree) and any other stow directories it encounters (see
"Multiple stow directories" in the info manual). Any symlink it finds
that points into the package being deleted is removed. Any directory
that contained only symlinks to the package being deleted is removed.
Any directory that, after removing symlinks and empty subdirectories,
contains only symlinks to a single other package, is considered to be a
previously "folded" tree that was "split open." Stow will re-fold the
tree by removing the symlinks to the surviving package, removing the
directory, then linking the directory back to the surviving package.
SEE ALSO
The full documentation for stow is maintained as a Texinfo manual. If
the info and stow programs are properly installed at your site, the
command
info stow
should give you access to the complete manual.
BUGS
Please report bugs in Stow using the Debian bug tracking system.
Currently known bugs include:
· The empty-directory problem.
If package foo includes an empty directory -- say, foo/bar -- then
if no other package has a bar subdirectory, everything's fine. If
another stowed package quux, has a bar subdirectory, then when
stowing, targetdir/bar will be "split open" and the contents of
quux/bar will be individually stowed. So far, so good. But when
unstowing quux, targetdir/bar will be removed, even though foo/bar
needs it to remain. A workaround for this problem is to create a
file in foo/bar as a placeholder. If you name that file
.placeholder, it will be easy to find and remove such files when
this bug is fixed.
· When using multiple stow directories (see "Multiple stow
directories" in the info manual), Stow fails to "split open" tree-
folding symlinks (see "Installing packages" in the info manual)
that point into a stow directory which is not the one in use by the
current Stow command. Before failing, it should search the target
of the link to see whether any element of the path contains a .stow
file. If it finds one, it can "learn" about the cooperating stow
directory to short-circuit the .stow search the next time it
encounters a tree-folding symlink.
AUTHOR
This man page was originally constructed by Charles Briscoe-Smith from
parts of Stow's info manual, and then converted to POD format by Adam
Spiers. The info manual contains the following notice, which, as it
says, applies to this manual page, too. The text of the section
entitled "GNU General Public License" can be found in the file
/usr/share/common-licenses/GPL on any Debian GNU/Linux system. If you
don't have access to a Debian system, or the GPL is not there, write to
the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA, 02111-1307, USA.
COPYRIGHT
Copyright (C) 1993, 1994, 1995, 1996 by Bob Glickstein
<bobg+stow@zanshin.com>; 2000, 2001 by Guillaume Morin; 2007 by Kahlil
Hodgson; 2011 by Adam Spiers; and others.
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided also that
the section entitled "GNU General Public License" is included with the
modified manual, and provided that the entire resulting derived work is
distributed under the terms of a permission notice identical to this
one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the Free Software Foundation.
perl v5.12.4 2012-02-18 STOW.IN(1)