prodreg(1M) System Administration Commands prodreg(1M)NAMEprodreg - Solaris Product Registry administration
SYNOPSISprodreg [--help] | [subcommand operand ...]
DESCRIPTION
The prodreg utility browses, unregisters, and uninstalls components in
the Solaris Product Registry.
Some installers make use of the libwsreg(3LIB) interface to register
information. The Solaris Product Registry contains information about
this installed software.
The database associated with the Solaris Product Registry is relative
to the root of the installed file system. Normally, this is the root of
the file system (/). Sometimes, an alternate root, with a different
Solaris Product Registry install database is used, as during live
upgrade installation. See live_upgrade(5).
The Registry database informs installers about installed software. The
Registry and the prodreg utility do not directly perform installation
or deinstallation. prodreg supports installers which are executed
externally and launched by the prodreg utility or other means.
Depending on the subcommand, the prodreg command offers equivalent
functions from the command line or a GUI viewer. Two versions of the
GUI viewer are available. The default is the Java Swing GUI. The other
version, the Java awt GUI is provided for environments without Java
Swing support.
The only feature which exists in the CLI which is not present in the
GUI is the unregister subcommand. It is possible for the product reg‐
istry to become corrupted, if for example, some software is removed
manually instead of by means of an uninstaller program. These entries
can confuse installers which are run subsequently. The unregister sub‐
command allows stale entries to be removed, even forcefully. Care
should be exercised when unregistering software with the recursive or
force options so that valid entries in the registry are not removed by
mistake.
The prodreg command, whether it launches the GUI or the command line
interface browser, displays the contents of the registry at that time
only. If software is installed or uninstalled subsequent to or concur‐
rent with launching either prodreg viewer, the view can be inconsistent
with the Solaris Product Registry.
SUBCOMMANDS
You can specify options to the prodreg command without specifying a
subcommand. If the subcommand is omitted, the swing subcommand is
assumed.
The following subcommands are supported:
awt
Launch the Java awt GUI.
The awt subcommand has the following format:
awt [-R alt_root | --help]
browse
Display the Solaris Product Registry using a command line inter‐
face. The text output of this command displays identifying informa‐
tion of any component in the product registry tree, including its
ancestors and children. If you repeatedly invoke this subcommand,
you can interactively browse the product registry.
The database components are related as a tree. Components may have
one or more children. Except for the root, components have one par‐
ent. This subcommand displays the ancestors and children for a
given component in the Solaris Product Registry database.
Each time the prodreg browse subcommand is executed, one component
in the Registry is shown, along with its ancestry to the root of
the Registry, as well as the component's children. To browse in the
prodreg GUI, a user selects a node to expand and clicks on it. The
analogous activity using the command line interface is to browse on
children of nodes successively, which effectively expands a view
into the registry.
Start by browsing the root of the Registry with prodreg browse.
Select components to expand the scope of the browsing activity. Use
browse numbers as a convenience during this interactive browsing,
but not in scripts. Browse numbers can change from one session to
the next or on different systems. This is because browse numbers
are generated as they are first used, by a given user on a particu‐
lar system.
The browse subcommand has the following format:
browse [-R alt_root] [-u uuid [-i instance | -p location]]
browse [-R alt_root] -n bnum [-i instance | -p location]
browse [-R alt_root] -m name
browse --help
This following information is output for each component:
BROWSE #
This is the browse number associated with each component. This
number can be used as an argument to either the prodreg browse
or info subcommands as a convenience
+/-/.
The + indicates a component in the tree with children who are
not shown. - indicates a component with children of which at
least one child is being shown. The . indicates a component
which has no children. This field is arranged so that each
space (reading left to right) depicts a successive generation.
UUID
This is the component's unique identifier.
#
This is the instance number of the component. Software compo‐
nents can be installed multiple times. The software registry
assigns a unique instance to each one.
NAME
Each component in the Solaris Product Registry database has a
localized name which is displayed in this field. It is possible
that this name may not be unique in the registry since there
could be another component that has the same name.
The browse subcommand provides four distinct options for viewing
the registry database. If multiple instances are associated with
the same component, then the output of the subcommand is the
ambiguous list. The request must be made unambiguous. The instance
or location operands can be used to disambiguate the browse subcom‐
mand when used with the -u or -n options.
· If no operand information is given, the root of the registry
tree is displayed, as well as its children. This is the start‐
ing point for interactive browsing of the entire registry
database.
· If the browse number is given, the component associated is
output.
· If the uuid is given, the component associated with it is out‐
put.
· If the name is given, the component associated with it is out‐
put.
info
Display attributes for any component in the Solaris Product Reg‐
istry by supplying identifying information for the component.
Components in the product registry are associated with attributes.
These attributes are composed of a name and a single value string.
This subcommand outputs attribute information associated with com‐
ponents in the Solaris Product Registry. Individual components in
the product registry are specified as for the browse subcommand,
except that either the uuid, name or bnum must be specified.
If a component requested is ambiguous as it has more than one
instance or the name is assigned to more than one component in the
registry, the list of possibilities is output, not the attribute
information.
The default output of this subcommand is a complete list of each
attributes, each on a new line. The attribute name is followed by a
colon (:) and a <SPACE>. The attribute value follows, after which a
<RETURN> is appended. Other options include can be specified using
-a and -d.
The info subcommand has the following format:
info --help
info [-R alt_root] -u uuid [-i instance | -p location]
info [-R alt_root] -n bnum [-i instance | -p location]
info [-R alt_root] -m name [-a attr | -d ]
help | --help | -?
Display help text.
The help subcommand has the following format:
help | --help | -?
swing
Launch the Java Swing GUI. If the Java Swing GUI is not available,
this subcommand fails.
The swing subcommand has the following format:
swing [-R alt_root | --help]
version | --version | -V
Outputs a current version string.
The version subcommand has the following format:
version | --version | -V
unregister
Unregister an entry in the registry.
Remove a component from the Solaris Product Registry. The component
corresponding to the uuid specified with the -u option must be a
single instance. If it is not, the subcommand fails and returns the
list of instances with the associated uuid. The subcommand must be
reissued using either -p or -i to uniquely determine which compo‐
nent instance to unregister.
The unregister subcommand fails if there are components in the reg‐
istry which depend on the component which is to be unregistered.
The unregister subcommand fails if the user does not have write
access to the registry. See wsreg_can_access_registry(3WSREG). The
unregister subcommand fails if the user attempts to unregister a
system component, instead of a component registered with the
Solaris Product Registry. System components include those which
include the attribute PKG and certain special Registry nodes
including the following:
UUID Name
==================================== =============================
root System Registry
a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b Solaris System Software
8f64eabf-1dd2-11b2-a3f1-0800209a5b6b Unclassified Software
b96ae9a9-1dd1-11b2-a3f2-0800209a5b6b System Software Localizations
b1c43601-1dd1-11b2-a3f2-0800209a5b6b Additional System Software
a8dcab4f-1dd1-11b2-a3f2-0800209a5b6b Software Localizations
Before the unregister subcommand with the -f option is used, you
should carefully review what components depend upon the component
which is to be unregistered. The -r option is even more dangerous,
since all children and software components depending upon the com‐
ponent are also deregistered. You can obtain the list of dependent
components for a component with UUID uuid using :
prodreg info -u uuid -a "Dependent Components"
You can obtain a list of required components using:
prodreg info -u <uuid> -a "Required Components"
The output lists the name, UUID and instance of the component.
The unregister subcommand has the following format:
unregister [-R alt_root] [-fr] -u uuid [-p location | -i instance]
unregister --help
uninstall
Launch an uninstaller program.
Each component in the registry can have an uninstaller associated
with it. This subcommand executes this associated installer, if
there is one, for a component in the registry given by the -u
option. If there is no uninstaller associated with the component,
the subcommand fails. If the component given by the -u option is
not unique (as there is more than one instance of the component
installed), the subcommand outputs a list of all instances. The
subcommand must then be reissued using -i or -p to disambiguate the
uuid given with the -u option. Finally, if the component to unin‐
stall is depended upon by other components, the command fails.
The command may also launch an uninstaller with a -x option. No
checks for whether this uninstalls a component upon which other
components depend in this case.
The uninstall command is not executed if the user does not have
write access to the registry. See wsreg_can_access_reg‐
istry(3WSREG).
The uninstall command has the following format:
uninstall [-R alt_root] [-f] -u uuid -p location
uninstall [-R alt_root] -i instance[arguments ...]
uninstall --help
OPTIONS
The awt subcommand supports the following options:
--help Display help text, do not launch the viewer.
-R alt_root Use the specified alternate root to locate the database
to display with the GUI viewer.
See OPERANDS for information regarding specification of
alt_root.
Note - The root file system of any non-global zones
must not be referenced with the -R option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(5).
The browse subcommand supports the following options:
-help Display help text, do not execute the browse subcom‐
mand.
-i instance Output the specified component instance.
-m name Output the component instances associated with the
name.
-n bnum Output the component instances associated with the
browse number.
-p location Output the component instance installed in the speci‐
fied location. The install location for a component can
be obtained using the 'info' subcommand.
-R alt_root Use the specified alternate root to locate the data‐
base.
Note - The root file system of any non-global zones
must not be referenced with the -R option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(5).
-u uuid Output the component instances associated with the
uuid.
The info subcommand supports the following options:
-a attr Output only the attribute whose name is given by the
operand 'attr', instead of all attributes of the speci‐
fied component.
-d Output only the attribute whose name is isDamaged,
instead of all attributes of the specified component.
If the value is set to true, this attribute indicates
that the component in the registry
--help Output help text, do not execute the browse subcommand.
-i instance The instance operand distinguishes among multiple
instances of components with the same uuid or browse
number.
-m name The name operand indicates one or more components in
the registry.
-n bnum Output the attributes of the component instance associ‐
ated with the browse number bnum. If there is more than
one instance, the command must be disambiguated using
the -ior -p options.
-p location The install location indicated distinguishes among mul‐
tiple instances of components with the same uuid or
browse number.
-R alt_root Use the specified alternate root to locate the data‐
base.
Note - The root file system of any non-global zones
must not be referenced with the -R option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(5).
-u uuid Output the attributes of the component instance associ‐
ated with the uuid. If there is more than one instance,
the subcommand must be disambiguated using the -i or -p
options.
The swing subcommand supports the following options:
--help Output help text, do not execute the install subcom‐
mand.
-R alt_root Use the specified alternate root to locate the data‐
base.
Note - The root file system of any non-global zones
must not be referenced with the -R option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(5).
The uninstall subcommand supports the following options:
-f Force the uninstall. A forced subcommand uninstalls all
instances of a component, even if there are multiple
ambiguous instances of the uuid operand.
--help Output help text, do not execute the unregister subcom‐
mand.
-i instance Disambiguate the uuid operand.
-p location Disambiguate the uuid operand. location corresponds to
the where the software component was installed.
-R alt_root Use the specified alternate root to locate the data‐
base.
Note - The root file system of any non-global zones
must not be referenced with the -R option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(5).
-u uuid Unregister the uuid component. If this component has
been installed multiple times, the instance to unregis‐
ter must be indicated unambiguously by using the -i or
-p option.
The unregister subcommand supports the following options:
-f Force the unregistration. A forced subcommand unregis‐
ters a component even if there are other components
which are dependent on this component.
--help Output help text, do not execute the unregister subcom‐
mand.
-i instance Disambiguate the uuid operand.
-p location Disambiguate the uuid operand. The location corresponds
to the where the software component was installed.
-r Causes a recursive deregistration of a component as
well as that component's children and dependencies.
-R alt_root Use the specified alternate root to locate the data‐
base.
Note - The root file system of any non-global zones
must not be referenced with the -R option.
Doing so might damage the global zone's file
system, might compromise the security of the
global zone, and might damage the non-global
zone's file system. See zones(5).
-u uuid Unregister component uuid of the component to unregis‐
ter. If this component has been installed multiple
times, the instance to unregister must be indicated
unambiguously by using the -i or -p option.
OPERANDS
The following operands are supported:
alt_root Pathname to a file indicating an alternate root. The
Solaris Product Registry database is located relative
to the alternate root. If database relative to this
location does not exist, it is created.
Note - The root file system of any non-global zones
must not be referenced by alt_root. Doing so
might damage the global zone's file system,
might compromise the security of the global
zone, and might damage the non-global zone's
file system. See zones(5).
attr Name of an attribute. This operand is used only with
the info subcommand. If attr is associated with a com‐
ponent, the attribute name and value is displayed.
bnum The browse number.
Each component in the Solaris Product Registry is asso‐
ciated with a browse number. This number is generated
for the convenience of an interactive user. The browse
number can change if the system is rebooted or rein‐
stalled. Do not store or use the browse number except
to facilitate the browse and info subcommands. Browse
numbers are always output by the prodreg browse subcom‐
mand. Only these values can be used as input values to
the browse or info subcommand.
instance Software can be installed in more than one location.
The Solaris Product Registry associates a unique
instance number for each. The browse subcommand shows
the instance number associated with each component in
the registry. The instance operand is used to distin‐
guish between installed, and possibly different, copies
of software, when such exist.
location A path to a specific file or directory in the file sys‐
tem. This operand indicates the installed location of
registered software. For instance, if software is
installed relative to /usr/local the value of this op‐
erand would be /usr/local. The install location is used
to installer or to indicate the location of an install‐
er or to disambiguate which instance is intended, of a
software component which can have multiple instances.
name Each software component in the Solaris Product Registry
is associated with a name. This name is output by the
browse subcommand. Some subcommands allow the user to
input the software by name as an operand as a conve‐
nience. These names might not be unique. If the user
supplies an ambiguous name, for which more than one
components exist, the subcommand outputs a list of pos‐
sible choices. The name can be localized; depending on
the language setting the name can differ.
uuid Each software component in the Solaris Product Registry
is associated with a unique identifier. This identifier
is a handle which accesses an entry in the registry
database. The uuid corresponds to the component irre‐
spective of how many instances of the component have
been installed, and what the localized name of the com‐
ponent is.
EXAMPLES
Example 1: Using the prodreg Command to Browse
Browsing is performed by means of the prodreg browse subcommand. Using
these requests iteratively, one can peruse the tree, much as one would
using a GUI by expanding components which are collections of other com‐
ponents. Browsing using browse numbers for convenience should be done
only during this iterative browsing process, since the numbers are gen‐
erated as a result of the browsing operation.
Evoking the browse subcommand without any arguments browses from the
top of the registry. The output varies depending on the software
installed on a particular system.
$ prodreg browse
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ============
1 - root 1 System
Registry
2 + a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b 1 Solaris 10
System
Software
3 + 8f64eabf-1dd2-11b2-a3f1-0800209a5b6b 1 Unclassified
Software
The output of this command lists the browse number, UUID, instance num‐
ber and name of the root component and its children. The ancestors of a
component, each parent up to the root, are also shown. The +/-/. column
indicates whether the component in the tree is an expanded parent (-),
a child with children (+) or a child without children (.).
Example 2: Requesting Information About the Components in a Tree
The UUID, name and browse number fields can be used to request browsing
information about components in the tree. The next example shows how a
component can be browsed by UUID.
$ prodreg browse -u a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ===========
1 - root 1 System
Registry
2 - a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b 1 Solaris 10
System
Software
4 + b96ae9a9-1dd1-11b2-a3f2-0800209a5b6b 1 System
Software
Localizations
5 + SUNWCall 1 Entire
Distribution
Example 3: Browsing a Node by Name
The following example shows how a node can be browsed by name.
$ prodreg browse -m "System Software Localizations"
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ===========
1 - root 1 System
Registry
2 - a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b 1 Solaris 10
System
Software
4 - b96ae9a9-1dd1-11b2-a3f2-0800209a5b6b 1 System
Software
Localizations
316 . SUNWceuow 1 Central
Europe OW
Support
317 . SUNWcsfw 1 Simplified
Chinese
freeware
message
318 . SUNWceuox 1 Central
Europe
64-bit OS
Support
Example 4: Browsing Iteratively
Additional output has been omitted. As a convenience, the browse number
can be used for iterative browsing. This number should not be stored,
as it differs depending on which system the prodreg command is run on,
which user is running the command, and the log in session in which the
command is run.
$ prodreg browse -n 3
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ===========
1 - root 1 System
Registry
2 - a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b 1 Solaris 10
System
Software
5 - SUNWCall 1 Entire
Software
Distribution
6 . SUNWrsmo 1 RSMPI
Operations
Registration
Module
7 + SUNWCjvx 1 JavaVM
(64-bit)
8 . SUNWrsmx 1 Remote
Shared
Memory
(64-bit)
9 + SUNWCacc 1 System
Accounting
Example 5: Browsing Using an Ambiguous Value
If the requested value is ambiguous, the list of ambiguous instances
are displayed. In the following example, there are two distinct soft‐
ware components with the same name.
$ ./prodreg browse -m JavaVM
The request failed because multiple components correspond to the
criteria given. Use the list of possible components given below,
select one and try again.
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ===========
12 . org.spybeam.javavm 1 JavaVM
51 . SUNWCjv 1 JavaVM
Issue one of the following requests again:
$ prodreg browse -u SUNWCjv
or
$ prodreg browse -u org.spybeam.javavm
Example 6: Browsing Multiple Installations of Software
Another possible ambiguous response arises when a particular software
component is installed multiple times. In the example below Example
software is registered three times.
$ prodreg browse -m Example
The request failed because multiple components correspond to the
criteria given. Use the list of possible components given below,
select one and try again.
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ===========
7 . org.spybeam.example 2 Example
7 . org.spybeam.example 3 Example
7 . org.spybeam.example 1 Example
The component requested could not be found.
Example 7: Browsing Using a Particular Instance
The request can be repeated specifying a particular instance to disam‐
biguate it. It is also possible to disambiguate a request with the -p
option, followed by the install location. In this case, to browse the
first instance of the Example software, one would use the command:
$ prodreg browse -u org.spybeam.example -i 1
Example 8: Using the info Subcommand
The install location, as well as other attributes of a component can be
obtained with the info subcommand. The info subcommand accepts the same
disambiguating options and returns all the attributes of a component,
each on a single line.
$ prodreg info -m Example
The request failed because multiple components correspond to the
criteria given. Use the list of possible components given below,
select one and try again.
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ===========
7 . org.spybeam.example 2 Example
7 . org.spybeam.example 3 Example
7 . org.spybeam.example 1 Example
The component requested could not be found.
This variation of the info subcommand outputs all information associ‐
ated with instance 1 of the Example component. The output from this
variation is not displayed
$ prodreg info -u org.spybeam.example -i 1
Example 9: Obtaining Information on the Install Location
You can use the info subcommand to obtain the install location and
other attributes of a component. The info subcommand accepts the same
disambiguating options as the browse subcommand. It returns all the
attributes of a component, each on a single line. You can also request
a single attribute.
The following command outputs the value of the install location
attribute:
$ prodreg info -n 23 -a Location
Example 10: Idenitifying and Unregistering Damaged Software
Removing installed software without using the associated uninstaller
can damage the software in the registry. A damaged component indicates
that certain software is installed, when in fact it is not present. A
component can be damaged by removing files or packages directly, with‐
out running the associated uninstaller. The general rule to follow is:
If software has been installed by an installer program, it should be
uninstalled using the supplied uninstaller program.
This example shows how to identify and repair damaged software compo‐
nents so that software can be reinstalled.
Browsing for Examplesoft, produces the following:
$ prodreg browse -m Examplesoft
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ============
1 - root 1 System
Registry
2 + a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b 1 Solaris 10
System
Software
3 + 8f64eabf-1dd2-11b2-a3f1-0800209a5b6b 1 Unclassified
Software
4 - 95842091-725a-8501-ef29-0472985982be 1 ExampleSoft
233 . 90209809-9785-b89e-c821-0472985982be 1 Example Doc
234 . EXSOzzt 1
235 . EXSOblob 1 Example Data
The Examplesoft child EXSOzzt, representing a package component of reg‐
istered software does not display its name. This is likely to be
because the software Examplesoft is damaged. Verify this with the fol‐
lowing command:
$ prodreg info -u 95842091-725a-8501-ef29-0472985982be \
-i 1 -d
isDamaged=TRUE
Since Damaged is TRUE, some part of Examplesoft is damaged. The follow‐
ing command lists the packages which make up Examplesoft:
$ prodreg info \
-u 95842091-725a-8501-ef29-0472985982be\
-i 1 -a PKGS pkgs:
EXSOzzt EXSOblob
Use the pkginfo command to verify if EXSO is installed:
$ pkginfo EXSOzzt
ERROR: information for "EXSOzzt" was not found
$ pkginfo EXSOblob
application EXSOblob Example Data
The output of these commands shows that the package EXSOzzt has been
removed, probably with the pkgrm command. The Examplesoft software will
probably not function. To repair the software, one should run the
uninstaller registered with Examplesoft. You probably need to run the
uninstaller with root permissions, as it unregisters the software and
runs pkgrm commands. Both of these operations require root permissions.
# prodreg uninstall -u 95842091-725a-8501-ef29-0472985982be -i 1
The install program requested could not be found.
Something is wrong, or else you would be able to access uninstall pro‐
gram to uninstall the software. One possibility is that the uninstaller
program has been removed manually. It is possible to determine where
the uninstaller is located by requesting the uninstallprogram
attribute:
$ prodreg info -m ExampleSoft -a uninstallprogram
uninstallprogram: /usr/bin/java -mx64m -classpath
/var/sadm/prod/org.example.ExampleSoft/987573587 uninstall_ExampleSoft
Check to see if there is an uninstaller in the registered location.
# ls /var/sadm/prod/org.example.ExampleSoft/987573587
/var/sadm/prod/org.example.ExampleSoft/987573587:
No such file or directory
Since there is no uninstaller at the desired location, you have two
options. One is to load the uninstaller from back up storage and run it
manually. Use the command line stored in the registry:
# /usr/bin/java -mmx64m -classpath \
/var/sadm/prod/org.example.ExampleSoft/987573587 \
uninstall_ExampleSoft
If there is no other possibility, manually unregister the software.
# prodreg unregister -u 95842091-725a-8501-ef29-0472985982be -i 1
This does not remove the remaining package EXSOblob. You must do this
manually.
# pkgrm EXSOblob
Example 11: Removing Multiple Components
Component A has children B and C, and C has children D and E, and the
you wish to remove all of the components at once. This is useful if the
whole hierarchy has to be reinstalled and the uninstaller has been lost
or cannot be run
$ prodreg browse -u UUID-of-C
BROWSE # +/-/. UUID # NAME
======== ===== ==================================== = ============
1 - root 1 System
Registry
2 + a01ee8dd-1dd1-11b2-a3f2-0800209a5b6b 1 Solaris 10
System
Software
3 + 8f64eabf-1dd2-11b2-a3f1-0800209a5b6b 1 Unclassified
Software
1423 - UUID-of-A 1 Example A
1436 . UUID-of-B 1 Example B
1437 - UUID-of-C 1 Example C
1462 . UUID-of-D 1 Example D
1463 . UUID-of-E 1 Example E
# prodreg uninstall -u UUID-of-A -i 1
The uninstall subcommand can fail various ways, for example if the java
classes have been removed, if the user has insufficient permissions or
if Java software is not present on the system. The recursive unregis‐
tration subcommand is very powerful and dangerous. Not only does it
unregister every child of a component, it also unregisters every compo‐
nent which depends upon the component to unregister. It is a good idea
to view all information about the component to determine if any compo‐
nents will be unintentionally unregistered with UUID-of-A.
$ prodreg info -u UUID-of-A
Title: Example A Software
Version: 5.8.0.2001.11.02
Location: /usr
Vendor: Example Vendor
uninstallprogram: /usr/bin/java -mx64m -classpath
/var/sadm/prod/org.example.ExampleA/90820965 uninstall_ExampleA
vendorurl: http://www.example.org
description: Example A Software has many uses
Supported Languages: en
Child Components:
Name UUID #
---------------------------------------------------------------
Example B UUID-of-B 1
Example C UUID-of-C 1
Required Components:
Name UUID #
---------------------------------------------------------------
Example B UUID-of-B 1
Example C UUID-of-C 1
No software depends on Example A, or else an additional field, Depen‐
dent Components would be shown. To further ensure that there are no
surprises, one should examine the dependent components and children of
UUID-of-B and UUID-of-C, all the components which depend on UUID-of-B,
UUID-of-C and their children, and so on.
If you examine the browse tree, you know the entire list of descendents
of UUID-of-A. You can also examine the dependent component attributes
of all of Example A's descendents.
$ prodreg info -u UUID-of-B -i 1 -a "Dependent Components"
Dependent Components:
Name UUID #
----------------------------------------------------------------
Example A UUID-of-A 1
$ prodreg info -u UUID-of-C -i 1 -a "Dependent Components"
Dependent Components:
Name UUID #
----------------------------------------------------------------
Example A UUID-of-A 1
$ prodreg info -u UUID-of-D -i 1 -a "Dependent Components"
Dependent Components:
Name UUID #
----------------------------------------------------------------
Example C UUID-of-C 1
$ prodreg info -u UUID-of-E -i 1 -a "Dependent Components"
Dependent Components:
Name UUID #
----------------------------------------------------------------
Example C UUID-of-C 1
A recursive unregistration of Example A only results in unregistering
Example A and its descendents, as intended.
# prodreg unregister -r -u UUID-of-A -i 1
Example 12: Reinstalling a Damaged Component
In this example, there is a component, Software ZZZ which is depended
upon by other software. Software ZZZ has been damaged and you need to
reinstall it. The reinstallation is impossible until Software ZZZ is
unregistered.
First, you check what depends upon Software ZZZ:
$ prodreg info -m "Software ZZZ" -a "Dependent Components"
Dependent Components:
Name UUID #
----------------------------------------------------------------
Software Foobar d9723500-9823-1432-810c-0100e09832ff 1
Normally, you would have to uninstall Software Foobar before unregis‐
tering Software ZZZ, since Software Foobar depends on Software ZZZ. You
decide that it is impossible or unreasonable to reinstall Software Foo‐
bar. Performing a recursive unregister of Software ZZZ is not an option
as it would unregister Software Foobar as well. Instead you can do a
forced unregister of Software ZZZ. The UUID of Software ZZZ is
90843fb1-9874-3a20-9b88-984b32098432.
# prodreg unregister -f -u 90843fb1-9874-3a20-9b88-984b32098432 -i 1
You can then reinstall Software ZZZ:
# /usr/bin/java -cp /usr/installers/org.example.softwarezzz
BUGS
The registry can become out of date because of software being manually
removed, or removed using pkgrm(1M) directly. To avoid damaging the
registry, use uninstall programs to remove software which was initially
installed using an install program.
ENVIRONMENT VARIABLES
The following environment variable affects the execution of prodreg:
PKG_INSTALL_ROOT If present, defines the full path name of a
directory to use as the system's
PKG_INSTALL_ROOT path. All product and package
information files are then looked for in the
directory tree, starting with the specified
PKG_INSTALL_ROOT path. If not present, the
default system path of / is used.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWwsr2, SUNWwsrv │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Evolving │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOpkgadd(1M), pkgrm(1M), wsreg_can_access_registry(3WSREG), libws‐
reg(3LIB), live_upgrade(5), attributes(5)
Application Packaging Developer's Guide
NOTES
The prodreg GUI and command line interface view both the Solaris Prod‐
uct Registry and the package database. Both look like components in the
registry, but some of these cannot be unregistered or uninstalled.
Packages do not have an associated uninstaller, so they cannot be unin‐
stalled using the prodreg uninstall subcommand. Solaris packages cannot
be unregistered using the prodreg unregister subcommand. Packages are
removed using the pkgrm(1M) command, after which time the packages do
not appear in the GUI or CLI prodreg viewer.
It is preferable to remove software using the uninstaller associated
with the software installed than to remove individual packages using
pkgrm(1M), since the uninstaller software takes care of comprehensive
removal of all resources associated with the installed software,
including unregistering information in Registry and removing the appro‐
priate packages.
The prodreg uninstall subcommand launches an external program. The com‐
mand line conventions of these programs have to be used to indicate the
alternate root for the product registry. Another possibility is to use
the PKG_INSTALL_ROOT environment variable for this purpose as the
install program is executed in the same environment as prodreg. Unin‐
stall programs are frequently java classes which require Java to be
installed. If Java software has been removed or is missing from a
Solaris distribution, it is impossible to run java based uninstallers.
Only the prodreg unregister and uninstall subcommands can only be run
with root permissions. This is because they modify the product registry
in the case of unregister, and remove packages in the case of unin‐
stall. The other operations merely read the registry and can be run
with any user permissions. The prodreg uninstall subcommand might
require root permissions as well, as installers can execute commands
such as pkgadd(1M) or pkgrm(1M) which require root permissions to run.
Attributes associated with components are documented in various places
-primarily in the Application Packaging Developer's Guide. The
attributes associated with the Solaris Product Registry itself are
described in the following glossary.
Dependent Components
List of components upon which the component depends.
Location
The location relative to which software was installed.
pkgs
List of packages which correspond to the component. These packages
are added with pkgadd after the component is registered. They are
removed with pkgrm before the component is unregistered.
Required Components
List of components on which the component depends.
Source
Media from which the install was done.
Supported Languages
List of locales for which there are registered titles.
Title
Name given by the prodreg browse subcommand. This name can be
localized to the locale in which the shell is running.
Unique Name
Name used by previous versions of the Solaris Product Registry.
This value is often set to the package name corresponding to a
given component in the registry.
Vendor
Vendor who produced the component.
Version
Version string associated with the component.
The Registry can contain components which do not correspond to software
actually installed on the system. This can be detected several ways.
The easiest is to check using the info subcommand if a component is
damaged. Another way is to determine where software was installed using
the info subcommand, and verify it is still there.
SunOS 5.10 6 Apr 2005 prodreg(1M)