mlib_ImageGridWarpTable_FpmediaLib Library Fumlib_ImageGridWarpTable_Fp(3MLIB)NAMEmlib_ImageGridWarpTable_Fp - grid-based image warp with table-driven
interpolation
SYNOPSIS
cc [ flag... ] file... -lmlib [ library... ]
#include <mlib.h>
mlib_status mlib_ImageGridWarpTable_Fp(mlib_image *dst,
const mlib_image *src, const mlib_f32 *xWarpPos,
const mlib_f32 *yWarpPos, mlib_d64 postShiftX, mlib_d64 postShiftY,
mlib_s32 xStart, mlib_s32 xStep, mlib_s32 xNumCells,
mlib_s32 yStart, mlib_s32 yStep, mlib_s32 yNumCells,
const void *interp_table, mlib_edge edge);
DESCRIPTION
The mlib_ImageGridWarpTable_Fp() function performs a regular grid-based
image warp on a floating-point image with table-driven interpolation.
The images must have the same type, and the same number of channels.
The images can have 1, 2, 3, or 4 channels. The data type of the images
can be MLIB_FLOAT or MLIB_DOUBLE. The two images may have different
sizes.
The image pixels are assumed to be centered at .5 coordinate points.
For example, the upper-left corner pixel of an image is located at
(0.5, 0.5).
For each pixel in the destination image, its center point D is, first,
backward mapped to a point S in the source image; then the source pix‐
els with their centers surrounding point S are selected to do one of
the interpolations specified by the filter parameter to generate the
pixel value for point D.
The mapping from destination pixels to source positions is described by
bilinear interpolation between a rectilinear grid of points with known
mappings.
Given a destination pixel coordinate (x, y) that lies within a cell
having corners at (x0, y0), (x1, y0), (x0, y1) and (x1, y1), with
source coordinates defined at each respective corner equal to (sx0,
sy0), (sx1, sy1), (sx2, sy2) and (sx3, sy3), the source position (sx,
sy) that maps onto (x, y) is given by the formulas:
xfrac = (x - x0)/(x1 - x0)
yfrac = (y - y0)/(y1 - y0)
s = sx0 + (sx1 - sx0)*xfrac
t = sy0 + (sy1 - sy0)*xfrac
u = sx2 + (sx3 - sx2)*xfrac
v = sy2 + (sy3 - sy2)*xfrac
sx = s + (u - s)*yfrac - postShiftX
sy = t + (v - t)*yfrac - postShiftY
In other words, the source x and y values are interpolated horizontally
along the top and bottom edges of the grid cell, and the results are
interpolated vertically:
(x0, y0) -> (x1, y0) ->
(sx0, sy0) (sx1, sy1)
+------------+---------+
| /| |
| (s, t) | |
| | |
| | |
| | |
| | |
| (x, y) -> | |
| (sx, sy)--+ |
| | |
| | |
| | (u, v) |
| |/ |
+------------+---------+
(x0, y1) -> (x1, y1) ->
(sx2, sy2) (sx3, sy3)
The results of above interpolation are shifted by (-postShiftX, -post‐
ShiftY) to produce the source pixel coordinates.
The destination pixels that lie outside of any grid cells are kept
intact. The grid is defined by a set of equal-sized cells. The grid
starts at (xStart, yStart). Each cell has width equal to xStep and
height equal to yStep, and there are xNumCells cells horizontally and
yNumCells cells vertically.
The degree of warping within each cell is defined by the values in
xWarpPos and yWarpPos parameters. Each of these parameters must contain
(xNumCells + 1)*(yNumCells + 1) values, which, respectively, contain
the source X and source Y coordinates that map to the upper-left corner
of each cell in the destination image. The cells are enumerated in row-
major order. That is, all the grid points along a row are enumerated
first, then the grid points for the next row are enumerated, and so on.
For example, suppose xNumCells is equal to 2 and yNumCells is equal to
1. Then the order of the data in the xWarpPos would be:
x00, x10, x20, x01, x11, x21
and in the yWarpPos:
y00, y10, y20, y01, y11, y21
for a total of (2 + 1)*(1 + 1) = 6 elements in each table.
PARAMETERS
The function takes the following arguments:
dst Pointer to destination image.
src Pointer to source image.
xWarpPos A float array of length (xNumCells + 1)*(yNumCells + 1)
containing horizontal warp positions at the grid
points, in row-major order.
yWarpPos A float array of length (xNumCells + 1)*(yNumCells + 1)
containing vertical warp positions at the grid points,
in row-major order.
postShiftX The displacement to apply to source X positions.
postShiftY The displacement to apply to source Y positions.
xStart The minimum X coordinate of the grid.
xStep The horizontal spacing between grid cells.
xNumCells The number of grid cell columns.
yStart The minimum Y coordinate of the grid.
yStep The vertical spacing between grid cells.
yNumCells The number of grid cell rows.
interp_table Pointer to an interpolation table. The table is created
by the mlib_ImageInterpTableCreate() function.
edge Type of edge condition. It can be one of the following:
MLIB_EDGE_DST_NO_WRITE
MLIB_EDGE_SRC_PADDED
RETURN VALUES
The function returns MLIB_SUCCESS if successful. Otherwise it returns
MLIB_FAILURE.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Committed │
├─────────────────────────────┼─────────────────────────────┤
│MT-Level │MT-Safe │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOmlib_ImageInterpTableCreate(3MLIB), mlib_ImageInterpTableDelete(3MLIB),
mlib_ImageGridWarp(3MLIB), mlib_ImageGridWarp_Fp(3MLIB), mlib_Image‐
GridWarpTable(3MLIB), attributes(5)SunOS 5.10 2 Mar 2007 mlib_ImageGridWarpTable_Fp(3MLIB)
