MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
NAME
mikmod - play soundtracker etc. modules on a Unix machine.
SYNOPSIS
mikmod [-options]... [module|playlist]...
DESCRIPTION
MikMod is a very portable module player based on libmikmod,
written originally by Jean-Paul Mikkers (MikMak). It will
play the IT, XM, MOD, MTM, S3M, STM, ULT, FAR, MED, DSM,
AMF, IMF and 669 module formats. It works under AIX,
FreeBSD, HP-UX, IRIX, Linux, NetBSD, OpenBSD, OSF/1, SunOS,
Solaris and OS/2. It is controllable via an easy-to-use
curses interface and will extract and play modules from a
variety of different archive formats.
OPTIONS
Options can be given in any order, and are case-sensitive.
For the options which have both a short and a long form, the
long form can be prefixed by one or two dashes. Note that
the settings in your $HOME/.mikmodrc will override the
defaults shown in this man page.
OUTPUT OPTIONS
-d n
--driver n
Use the specified device driver for output, 0 is
autodetect. The default is 0. If your installed
libmikmod engine is recent enough (>=3.1.7), you can
also specify the driver with an alias, as well as
driver options separated by commas. The list and driver
aliases and recognized options can be found in
libmikmod's documentation.
-o[utput] 8m|8s|16m|16s
Output settings, 8 or 16 bit in stereo or mono. The
default is "16s".
-f freq
--frequency freq
Set mixing frequency in hertz. The default is 44100.
Page 1 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)-i
--interpolate
Use interpolated mixing. This will generally improve
audio quality, at the expense of a bit more CPU usage.
Note that this option alters the behaviour of software
drivers only ; hardware drivers are not affected.
--nointerpolate
Do not use interpolated mixing (default).
-hq
--hqmixer
Use high quality software mixer. This improves audio
quality, but requires a lot more CPU power. Note that
this option alters the behaviour of software drivers
only ; hardware drivers are not affected.
--nohqmixer
Do not use high quality software mixer (default).
-s
--surround
Use surround mixing.
--nosurround
Do not use surround mixing (default).
-r n
--reverb n
Sets reverb amount from 0 (no reverb) to 15 (max
reverb). The default is 0 (no reverb).
PLAYBACK OPTIONS
-v volume
--volume volume
Set volume from 0% (silence) to 100%. The default is
100%.
-F
--fadeout
Fade out the volume during the last pattern of each
module.
--nofadeout
Page 2 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
Do not fade out the volume during the last pattern of
each module (default).
-l
--loops
Enable in-module backwards loops.
--noloops
Disable in-module backwards loops (default).
-a
--panning
Process panning effects (default). This should be
disabled (using --nopanning) for very old demo modules
which use the panning effects for synchronization
purposes.
--nopanning
Do not process panning effects.
-x
--protracker
Enable protracker extended speed effect (default). This
should be disabled (using --noprotracker) for very old
demo modules which use the extended speed effect for
synchronization purposes.
--noprotracker
Disable protracker extended speed effect.
LOADING OPTIONS
-c
--curious
Look for hidden patterns in module. Most modules don't
have hidden patterns, but you can find "bonus" patterns
(or just silence) in some modules.
--nocurious
Do not look for hidden patterns in module (default).
-p n
--playmode n
Playlist mode. The allowed values here are 0, to loop
the current module ; 1, to play the whole playlist once
; 2, to play the whole playlist repeatedly, and 3, to
Page 3 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
play the whole playlist randomly. The default is 2.
-t
--tolerant
Don't halt MikMod if a module cannot be read or is an
unknown format.
--notolerant
Halt MikMod if a module cannot be read or is an unknown
format (default).
SCHEDULING OPTIONS
The following options need root privileges (or a setuid root
binary), and don't work under all systems.
-s Y|N
--renice Y|N
Renice to -20 if possible to gain more CPU priority.
This option is only available under FreeBSD, Linux,
NetBSD, OpenBSD and OS/2.
--norenice
Do not renice to -20 (default).
-S Y|N
--realtime Y|N
Reschedule mikmod to gain real-time priority (and thus
more CPU time). DANGEROUS! USE WITH CAUTION! This
option is only available under FreeBSD, Linux and OS/2.
--norealtime
Do not reschedule MikMod to gain real-time priority
(default).
DISPLAY OPTIONS
-q
--quiet
Quiet mode. Disables interactive commands and displays
only errors.
-te
--terse
Terse display like MikMod 2, i.e. without the
Page 4 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
information panels.
INFORMATION OPTIONS
-n
--information
Display the list of the known drivers and module
loaders.
-V
--version
Display MikMod version.
-h
--help
Display a summary of the options.
CONFIGURATION OPTION
--norc
Do not parse the $HOME/.mikmodrc configuration file.
This file contains your default settings, so that you
don't have to specify them each time you run MikMod.
The file is read when you run MikMod and updated on
exit. Using this option prevents MikMod from accessing
this file.
RUNTIME COMMANDS
At play time, the following keystrokes offer control over
MikMod:
H, function key F1
Display help panel.
S, function key F2
Display samples panel.
I, function key F3
Display instruments panel (if present in the module).
M, function key F4
Display song message panel (if present in the module).
L, function key F5
Display the playlist panel.
Page 5 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
C, function key F6
Display the configuration panel.
digits
Set volume from 10% (digit 1) to 100% (digit 0).
< Decrease volume.
> Increase volume.
-, Left
Restart current pattern / skip to previous pattern.
+, Right
Skip to next pattern in current module.
Up, Down
Scroll panel.
PgUp, PgDown
Scroll panel (faster).
Home Go on top of the panel.
End Go to the end of the panel.
( Decrease speed variable (module plays faster).
) Increase speed variable (module plays slower).
{ Decrease tempo variable (module plays slower).
} Increase tempo variable (module plays faster).
: or ;
Toggle interpolation mixing.
U Toggle surround mixing.
Q Exit MikMod.
P Switch to previous module in playlist.
N Switch to next module in playlist.
R Restart current module.
space
Toggle pause.
Control-L
Refresh the screen.
Page 6 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
MENU BASICS
Some functions of MikMod are available through menus, in the
playlist and configuration panels.
You can select commands in the menus either by moving the
selection with the arrow keys and pressing enter, or
entering the highlighted letter corresponding ot the command
you want to select.
Menu entries ending with a > character open a submenu,
whereas entries ending in ... open a dialog box. You can
dismiss a submenu either by choosing a command in this menu,
or using the left arrow key to go back, or switching panels.
In dialog boxes, you can move the focus from the input line
to the Ok and Cancel buttons either with the "tab" key, or
the up and down arrow keys.
Also, if the statusbar is active (which is the default
behaviour), it will contain a short help text describing the
menu option currently highlighted.
PLAYLIST MENU
When the playlist panel is displayed, pressing the return
key will popup a menu. The menu commands are:
Play Continue list playback from the currently highlighted
module.
Remove
Remove module from the playlist.
Delete...
Remove module from the playlist, and delete module file
on disk, or whole archive if the module is stored in an
archive file. This function asks you to confirm your
choice.
File >
This entry opens a submenu with four commands, "Load",
"Insert", "Save" and "Save as". The Load and Insert
commands ask you for a filename, and replace the
playlist with it (load) or merge it with the playlist
(insert). No wildcards are allowed. The Save and Save
as commands save the current playlist in a file, by
default ``playlist.mpl'', in the current directory.
Note that playlist filenames should end in .mpl, or
they won't be loaded by MikMod.
Page 7 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
Shuffle
Randomize the playlist.
Sort >
This entry opens a submenu with sort commands. You can
select a normal or reverse order, and then sort the
playlist with one of the four criteria: by name, by
extension, by path or by time.
Back Discards the menu.
CONFIGURATION PANEL
The configuration panel lets you customize your MikMod
settings, and save them. You can also try some particular
settings without losing your previous configuration.
Output options
This section lets you choose various vital playback
settings, such as the output driver, the stereo/mono
and 16/8 bit output settings, the playback frequency,
and the software mixer settings.
Playback options
This section lets you choose various module playback
settings, such as the output volume, the processing of
panning effects and bacwards loops, etc.
Other options
This section lets you choose the remaining settings,
such as the playlist mode, and various program
settings.
Use config
This command activates the current configuration
settings, but does not save them.
Save config
This command saves and activates the current
configuration settings.
Revert config
This command reverts to the on-disk configuration file
settings.
MODULE FORMATS
MikMod will currently play the following common and not so
Page 8 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
common formats:
669 Composer 669 and Extended 669 modules.
AMF DSMI internal module format (Advanced Module Format,
converted with M2AMF).
DSM DSIK's internal module format.
FAR Farandole composer modules.
GDM General Digital Munsic internal module format
(converted with 2GDM).
IMF Imago Orpheus modules.
IT Impulse Tracker modules.
MED Amiga MED modules, but synthsounds are not supported.
MOD Protracker, Startracker, Fasttracker, Oktalyzer, and
Taketracker modules.
MTM Multitracker module editor modules.
S3M Screamtracker version 3 modules.
STM Screamtracker version 2 modules.
STX STMIK converted modules.
ULT Ultratracker modules.
UNI, APUN
Old MikMod (UNI) and APlayer (APUN) internal module
format.
XM Fasttracker 2 modules.
ARCHIVE FORMATS
MikMod should recognize and extract the following common
archive formats. However, to use each of these you will
need to find the appropriate program(s) for MikMod to use to
extract them. These are commonly available and you will most
likely find them with this distribution of MikMod.
zip Info-zip or PkZip archives, commonly used on
DOS/Windows platforms.
Page 9 (printed 3/14/100)
MIKMOD(1) UNIX System V (Version 3.1.6, 5th July 1999) MIKMOD(1)
lha, lzh
Lharc archives, commonly used on the Amiga.
zoo Zoo archives, quite rare those days...
rar Rar archives.
gz Gzip compressed files.
bz2 Bzip2 compressed files.
tar, tar.gz and tar.bz2
Tar archives, even compressed with gzip or bzip2.
FILES
$HOME/.mikmodrc (or MikMod.cfg under OS/2)
User configuration settings, can also contain a default
playlist.
playlist.mpl
Default playlist filename.
AUTHORS
MikMod is the result of the work of many people, including:
Jean-Paul Mikkers, Jake Stine, Miodrag Vallat, Frank
Loemker, Steve McIntyre, Peter Amstutz, "MenTaLguY", Dimitri
Boldyrev, Shlomi Fish, Stefan Tibus, Tinic Urou. A full
list of people having worked on libmikmod and MikMod is
displayed when MikMod starts.
LOCATING NEWER VERSIONS...
The official MikMod and libmikmod home page is located on
http://mikmod.darkorb.net An European mirror is at:
http://www.multimania.com/miodrag/mikmod
New releases can also be found on the official ftp site
ftp://mikmod.darkorb.net and after a short delay on
metalab (formerly known as sunsite) and its mirrors
ftp://metalab.unc.edu/pub/Linux/apps/sound/players and on
hobbes, in source and OS/2 binary forms
ftp://hobbes.nmsu.edu/pub/os2/mmedia
Page 10 (printed 3/14/100)