INET(7F)INET(7F)NAMEinet - Internet protocol family
SYNOPSIS
#include <sys/types.h>
#include <netinet/in.h>
DESCRIPTION
The Internet protocol family is a collection of protocols layered atop
the Internet Protocol (IP) transport layer, and utilizing the Internet
address format. The Internet family provides protocol support for the
SOCK_STREAM, SOCK_DGRAM, and SOCK_RAW socket types; the SOCK_RAW
interface provides access to the IP protocol.
ADDRESSING
Internet addresses are four byte quantities, stored in network standard
format. The include file <netinet/in.h> defines this address as a
discriminated union.
Sockets bound to the Internet protocol family utilize the following
addressing structure:
struct sockaddr_in {
short sin_family;
u_short sin_port;
struct in_addr sin_addr;
char sin_zero[8];
};
Sockets may be created with the local address INADDR_ANY to effect
"wildcard" matching on incoming messages. The address in a connect(2) or
sendto(2) call may be given as INADDR_ANY to mean ``this host.'' The
distinguished address INADDR_BROADCAST is allowed as a shorthand for the
broadcast address on the primary network if the first network configured
supports broadcast.
PROTOCOLS
The Internet protocol family is comprised of the IP transport protocol,
Internet Control Message Protocol (ICMP), Internet Group Management
Protocol (IGMP), Transmission Control Protocol (TCP), and User Datagram
Protocol (UDP). TCP is used to support the SOCK_STREAM abstraction while
UDP is used to support the SOCK_DGRAM abstraction. A raw interface to IP
is available by creating an Internet socket of type SOCK_RAW. The ICMP
message protocol is accessible from a raw socket.
The 32-bit Internet address contains both network and host parts. It is
frequency-encoded; the most-significant bit is clear in Class A
addresses, in which the high-order 8 bits are the network number. Class
B addresses use the high-order 16 bits as the network field, and Class C
addresses have a 24-bit network part. Sites with a cluster of local
networks and a connection to the DARPA Internet may chose to use a single
network number for the cluster; this is done by using subnet addressing.
Page 1
INET(7F)INET(7F)
The local (host) portion of the address is further subdivided into subnet
and host parts. Within a subnet, each subnet appears to be an individual
network; externally, the entire cluster appears to be a single, uniform
network requiring only a single routing entry. Subnet addressing is
enabled and examined by the following ioctl(2) commands on a datagram
socket in the Internet domain; they have the same form as the SIOCIFADDR
command (see netintro(7)).
SIOCSIFNETMASK Set interface network mask. The network mask defines
the network part of the address; if it contains more
of the address than the address type would indicate,
then subnets are in use.
SIOCGIFNETMASK Get interface network mask.
SEE ALSOioctl(2), socket(2), netintro(7), route(7F), tcp(7P), udp(7P), ip(7P),
icmp(7P)
IRIX Network Programming Guide.
CAVEAT
The Internet protocol support is subject to change as the Internet
protocols develop. Users should not depend on details of the current
implementation, but rather the services exported.
Page 2
