glresources(3G)glresources(3G)NAME
GLResources - X resources used by GL programs
DESCRIPTION
In IRIX 4.0 and later, the GL responds to several X resources, allowing
run-time control over some aspects of GL programs.
This man page assumes you are somewhat familiar with X resources, if you
are not, you should read some X documentation such as Volume 3 of the
O'Reily X books.
The GL uses resources names with the prefixes
appname.gl. (instance prefix)
Appname.GL. (class prefix)
where appname and Appname are derived from the argument to the GL
program's first call to winopen(3G) upper case.
appname may not exactly match the first argument to winopen, because
appname must follow the rules for legal resource names. The following
processing is done on all winopen names to turn them into resource names:
In the instance name (appname), the first character, if it is a
letter, is changed to be in lower case.
In the class name (Appname), the first character, if it is a letter,
is changed to be in upper case.
All spaces are removed, alphabetic characters following space are
changed to upper case.
All characters except 0-9, A-Z, "-" (dash) and "_" (underscore) are
stripped.
For example, if the first call to winopen of a gl program was
winopen("clock view #123");
All the resources instance names for the program would be prefixed with
clockView123.gl. and class names with ClockView123.GL.
WINDOW SPECIFIC RESOURCES
The following resources affect only windows whose full resource names
match resource specification. That is, it is possible to specify these
resources in such a way that only some of the windows of a GL program are
affected by these resources.
All of theses resources are fully specified by the names listed here,
preceded by the window resource path name of the window. That is the
application prefix mentioned above, followed by .winName in the instance
string and .GLWindow in the class name.
That is, if the above "clock view" program were to open another window
with the call
winopen("second one");
Page 1
glresources(3G)glresources(3G)
the winName would be secondOne, and its window specific resources would
all by fully specified by preceding the names with
clockView123.gl.secondOne. and ClockView123.GL.GLWindow.
Here are the window specific resources. Each resource has two names, a
class name and an instance name. In most cases the class name is the
same as the instance name except for case.
geometry
Geometry Specifies an initial size and/or position for the window. The
syntax and interpretation of the geometry resource is the same
as for X window: widthxheight[+-]xpos[+-]ypos.
For all the resources controlling size and position, values in
the resource file override program specified position (through
prefposition(3G)), but not program specified placement (through
winposition(3G)).
position
Position Specifies initial size and position of the window, the
coordinate system is 0,0 at the lower left hand corner of the
screen. Syntax is: xpos ypos [ units ] width height [ units ]
. The units are optional and are one of pixels, inches or mm.
If no units are specified, the numbers are assumed to be in
pixels.
size
Size Specifies initial size only. Syntax is: width height [ units ]
origin
Origin Specifies initial lower left origin only. If program doesn't
call prefsize(3G), or if another resource doesn't specify a
size, this resource has no effect. Syntax is: xpos ypos [
units ]
pointerShape
Cursor Sets the default cursor for that window to the X font cursor
shape with the given name. This is the cursor which the window
will show when GL cursor number 0 is active. Syntax: cursor
name
pointerColor
Foreground
Sets the foreground color of the default gl cursor. Syntax:
colorname | #RRGGBB
pointerColorBackground
Background
Sets the background color of the default gl cursor. Syntax:
colorname | #RRGGBB
Page 2
glresources(3G)glresources(3G)MENU RELATED RESOURCES
These resources control the behavior and appearance of the popup menus
displayed by defpup(3G). Some IRIX 4.0 programs use menus that look the
same, but aren't controlled by exactly the same resources. Two examples
of programs with similar-looking, but non-GL, menus would be workspace(1)
and wsh(1).
menu.overFirst
Menu.OverFirst
If this resource is specified and is set to "True" then when
the popop menu is first drawn, it will be placed so that the
first menu item is automatically selected. Syntax: False |
True
menu.darkColor
Menu.Foreground
menu.mediumColor
Menu.Background
menu.lightColor
Menu.Background
The menus are drawn in the overlay planes by using dither
patterns made from three colors: dark, medium, and light.
Syntax: colorname | #RRGGBB
menu.font
Menu.Font This is the font used for the body of the menus. Syntax:
xfontname
menuTitle.font
MenuTitle.Font
This is the font used for the title of the menus. Syntax:
xfontname
COMPATIBILITY RELATED RESOURCES
There are a few areas where the GL behaves in an incompatible way in IRIX
4.0. In order to enable compatible behavior for programs that can't be
re-compiled, there are the following resources.
glCompat.softAttach
GLCompat.SoftAttach
Under previous window systems, if any keyboard key were held
down, a window would keep receiving mouse events, even if the
mouse moved out of the window. This type of input distribution
is not supported as a generally available focus policy in X, so
the GL can provide a similar behavior from programs that ask
for it. If a program calls
glcompat(GLC_SOFTATTACH, TRUE);
or if it has the softAttach resource set to true, then holding
down any of the modifier keys (other than alt) locks the mouse
focus onto that window until all modifier keys (other than alt)
Page 3
glresources(3G)glresources(3G)
are released. (Modifier keys other than alt are shift and
control.) Syntax: True | False
glCompat.motionQGrowthRate
GLCompat.MotionQGrowthRate
Prior to release 4.0 there was an artificial throttle on the
number of mouse events per second that would be delivered to a
program. This was set at around 15 events per second. In IRIX
4.0 programs can receive over 100 mouse events per second.
Programs that do a lot of processing on each mouse event can
suddenly find themselves doing 10 times more work. This
resource enables varying levels of compression of mouse motion.
Syntax: compat | compress, where compat produces a rate similar
to pre 4.0, and compress gives maximum compression of motion
events.
Note: when this resource is used to cause libgl to compress
motion events, the most recent motion event is never thrown
away. Rather, if a new event arrives at a rate faster than
allowed by the value of this resource, the new event overwrites
the former most recent event. That is, using compression does
not in any way prohibit a program from keeping up with the
device.
This functionality may be accessed from a C program by calling
glcompat(GLC_MQUEUERATE, GLC_COMPATRATE);
or
glcompat(GLC_MQUEUERATE, GLC_CMPRESS);
glCompat.manageBackground
GLCompat.ManageBackground
If set to True, imakebackround(3G) windows will be managed by
the window manager. The correct setting of this will vary
based on type of background program and type of machine and the
user's selection of window managers. See imakebackground(3G)
for more information. Syntax: True | False
glCompat.slowMapcolors
GLCompat.SlowMapcolors
If set to true, then the default behavior of mapcolor buffering
will be disabled. See mapcolor(3G) for more details. Syntax:
True | False
glCompat.inputChangeBug
GLCompat.InputChangeBug
If set to True, the pseudo device INPUTCHANGE retains a bug
compatible behavior relating to subwindows. See glcompat(3G)
for more information. Syntax: True | False
glCompat.noBorderBug
Page 4
glresources(3G)glresources(3G)
GLCompat.NoBorderBug
If set to True, then windows which remove their borders with
winconstraints(3G) can never get them back. See glcompat(3G)
for more information. Syntax: True | False
glCompat.forceCIMap
GLCompat.ForceCIMap
If set to True, then the color index colormap will also be
installed when an RGB window receives colormap focus. Syntax:
True | False
glCompat.tabletScale
GLCompat.TabletScale
determines how tablet coordinates are scaled when the tablet
controls the pointer (graphics cursor).
If the value is 0, there is a 1-1 mapping between tablet
coordinates and screen coordinates, so that on a typical
tablet, only the lower left quadrant will be mapped to the
screen.
If the value is 1 (the default), then "iso" scaling is
performed. That is, as much of the tablet as possible is
mapped to the screen, with the restriction that a 1-1 aspect
ratio is preserved. (I.e. the same scaling is applied to both
x and y.)
If the value is 2, then the entire tablet is mapped to the
entire screen. (This is called "fit" scaling.)
OTHER MISCELLANEOUS RESOURCES
autoFork
AutoFork If autoFork is set to False, or if foreground(3G) is called,
then the GL will not fork when it firsts calls winopen.
Syntax: True | False
setvalConstrains
SetvalConstrains
When setvaluator(3G) is used for a device such as MOUSEX which
controls the cursor, the vmin and vmax arguments can cause the
cursor to be constrained to a rectangle which is less than the
full screen. If setvalConstrains is set to False, then
setvaluator(3G) will not constrain the cursor. The default is
True. Syntax: True | False
SOURCES OF RESOURCES
The GL mimics Xt's resource search rules, and looks for resources in the
following places:
$XFILESEARCHPATH/Appname or /usr/lib/X11/app-defaults/Appname
Page 5
glresources(3G)glresources(3G)
$XUSERFILESEARCHPATH/Appname or $XAPPLRESDIR/Appname or
$HOME/Appname
Server resource database or $HOME/Xdefaults
$XENVIRONMENT or.Xdefaults-hostname
Contents of the environment variable GLRES
EXAMPLES
The following program and resource file show some examples of how these
resources can be used to customize the behavior of a GL program.
/* Begin C Program */
#include <gl.h>
#include <device.h>
main()
{
int m;
winopen("res test");
color(0); clear();
wintitle("Resource Test -- First Window");
winopen("2nd window");
color(0); clear();
qdevice(RIGHTMOUSE);
m = defpup("Main Menu%t|One|Two|Three");
for (;;) {
short val;
switch (qread(&val)) {
case REDRAW:
winset(val);
reshapeviewport();
color(0);
clear();
break;
case RIGHTMOUSE:
if (val) dopup(m);
break;
}
}
}
/* End C Program */
!
! Begin Resource file, put this in $HOME/ResTest
!
! Give these windows an interesting cursor
resTest*pointerShape: gumby
!
! Make all fonts for this program's menus be large
resTest*Font: -*-times-*-r-*-*-34-*-*-*-*-170-*-*
Page 6
glresources(3G)glresources(3G)
!
! Make the first window appear in the lower left corner,
! and be 1 inch square
resTest.gl.resTest.position: 0 0 pixels 1 1 inches
!
! Make the second window appear in the upper right corner
resTest.gl.2ndWindow.geometry: 300x300-50+50
!
! Keep the program from backgrounding itself
resTest.gl.autoFork: False
!
! Note that wildcarding can be used in resource names.
! For example, the entry for autoFork could have been written
! "*gl*autoFork: False" or "*gl.autoFork: False".
SEE ALSOglcompat(3G), xrdb(1), Xlib Resource Manager documentation,
foreground(3G), imakebackground(3G), winopen(3G)
Page 7
