ddi_mem_rep_get8(9F) Kernel Functions for Drivers ddi_mem_rep_get8(9F)NAME
ddi_mem_rep_get8, ddi_mem_rep_get16, ddi_mem_rep_get32,
ddi_mem_rep_get64, ddi_mem_rep_getw, ddi_mem_rep_getl,
ddi_mem_rep_getll, ddi_mem_rep_getb - read multiple data from mapped
device in the memory space or allocated DMA memory
SYNOPSIS
#include <sys/ddi.h>
#include <sys/sunddi.h>
void ddi_mem_rep_get8(ddi_acc_handle_t handle, uint8_t *host_addr,
uint8_t *dev_addr, size_t repcount, uint_t flags);
void ddi_mem_rep_get16(ddi_acc_handle_t handle, uint16_t *host_addr,
uint16_t *dev_addr, size_t repcount, uint_t flags);
void ddi_mem_rep_get32(ddi_acc_handle_t handle, uint32_t *host_addr,
uint32_t *dev_addr, size_t repcount, uint_t flags);
void ddi_mem_rep_get64(ddi_acc_handle_t handle, uint64_t *host_addr,
uint64_t *dev_addr, size_t repcount, uint_t flags);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI).
PARAMETERS
handle The data access handle returned from setup calls, such
as ddi_regs_map_setup(9F).
host_addr Base host address.
dev_addr Base device address.
repcount Number of data accesses to perform.
flags Device address flags:
DDI_DEV_AUTOINCR Automatically increment the
device address, dev_addr, dur‐
ing data accesses.
DDI_DEV_NO_AUTOINCR Do not advance the device
address, dev_addr, during data
accesses.
DESCRIPTION
These routines generate multiple reads from memory space or allocated
DMA memory. repcount data is copied from the device address, dev_addr,
in memory space to the host address, host_addr. For each input datum,
the ddi_mem_rep_get8(), ddi_mem_rep_get16(), ddi_mem_rep_get32(), and
ddi_mem_rep_get64() functions read 8 bits, 16 bits, 32 bits and 64 bits
of data, respectively, from the device address, dev_addr. dev_addr and
host_addr must be aligned to the datum boundary described by the func‐
tion.
Each individual datum will automatically be translated to maintain a
consistent view between the host and the device based on the encoded
information in the data access handle. The translation may involve
byte-swapping if the host and the device have incompatible endian char‐
acteristics.
When the flags argument is set to DDI_DEV_AUTOINCR, these functions
will treat the device address, dev_addr, as a memory buffer location
on the device and increments its address on the next input datum. How‐
ever, when the flags argument is set to DDI_DEV_NO_AUTOINCR, the same
device address will be used for every datum access. For example, this
flag may be useful when reading from a data register.
CONTEXT
These functions can be called from user, kernel, or interrupt context.
SEE ALSOddi_mem_get8(9F), ddi_mem_put8(9F), ddi_mem_rep_put8(9F),
ddi_regs_map_setup(9F), ddi_device_acc_attr(9S)NOTES
The functions described in this manual page previously used symbolic
names which specified their data access size; the function names have
been changed so they now specify a fixed-width data size. See the fol‐
lowing table for the new name equivalents:
┌───────────────────────────────────────────────────────────┐
│Previous Name New Name │
│ddi_mem_rep_getb ddi_mem_rep_get8 │
│ddi_mem_rep_getw ddi_mem_rep_get16 │
│ddi_mem_rep_getl ddi_mem_rep_get32 │
│ddi_mem_rep_getll ddi_mem_rep_get64 │
└───────────────────────────────────────────────────────────┘
SunOS 5.10 28 Aug 1996 ddi_mem_rep_get8(9F)