SCSI(7)SCSI(7)NAME
SCSI, RAID - Small Computer System Interface
SYNOPSIS
dsk#, tape#_d#, cdrom#
DESCRIPTION
The operating system interfaces to disk and tape devices through the
Small Computer System Interface (SCSI). SCSI support is limited to the
HP-supplied storage devices and certain third-party devices. To deter‐
mine which named devices are supported in the default system, refer to
the file /etc/ddr.dbase. For example, the following devices are listed
therein: Winchester disks: RZ24L, RZ25, RZ25L, RZ25M, RZ28M, RZ29B,
RZ55, RZ56, RZ58, RZ73, RZ74, RX23, RX26, RX33, IOMEGA ZIP, RAID
(Redundant Arrays of Independent Disks) SCSI controllers: HSZ10, HSZ40,
HSZ80 Magnetic tapes: TZ30, TZK11, TLZ06, TKZ09, TKZ60, DLT8000,
SDT-10000 Media Changers: TL800, ESL9000 Optical disks: RRD42, RRD43,
RRD44
Vendors can add their own devices to ddr.dbase.
Refer to the Software Product Description (SPD) for a given release of
the operating system for more information on processor-specific device
support.
Under the operating system, a SCSI device is referred to by a device
identifier that is assigned by the operating system. This name has no
relationship to the descriptive name of the device, although in previ‐
ous releases of the operating system disks such as the RZ74 mapped to a
system-assigned rz# logical name (where # was the instance number of
that disk.
Current logical names for SCSI disks and tapes take the forms specified
in the rz(8) and tz(7) reference pages, such as dsk? and tape?. Refer
to the dsfmgr(8) reference page for the naming conventions for disks,
tapes and other devices, such as CD-ROM readers. Refer to the hwmgr(8)
reference page for information on determining device names and other
device data.
SCSI Device Limits
The number of possible target device IDs is determined by the con‐
troller type and method of connection, such as a multibus connection
using fibre channel. Refer to the emx(7) reference page for an example
of device addressing.
Device Special Files
The dsfmgr command creates device special files for all the devices
that are attached to SCSI controllers. This event occurs automatically
on system startup, and no administrative intervention is required
unless an event requires that a device be renamed or its I/O be reas‐
signed. In such cases, you can use dsfmgr and hwmgr to manage SCSI
devices and their associated device special files without the need to
calculate values from their Bus, Target ID, and LUN data.
RESTRICTIONS
The SCSI device driver is not warrantied to operate with optical disks
other than the devices listed in /etc/ddr.dbase/. The SCSI driver
attempts to support, on a best-effort basis, disks and magnetic tapes
supplied by other vendors.
The following notes apply to the driver's handling of disks from other
vendors: These disks are identified using the following command:
# hwmgr -get attribute -a name
This command will return the device name SCSI-WWID (World-Wide
Identifier) for all devices on the system, which includes the
model name of the device. You can filter the output by specify‐
ing categories of devices. Disks are assigned a default parti‐
tion table. The default table can be modified by editing the
ccmn_rzxx_sizes[8] entry in the /usr/sys/data/cam_data.c file.
The disklabel command can also be used to modify the partition
table on an RZxx disk.
SEE ALSOatapi_ide(7), dsfmgr(8), emx(7), hwmgr(8), rz(7), tz(7), disklabel(8),
ddr.dbase(4)SCSI(7)