ZSHALL(1)ZSHALL(1)NAMEzshall - the Z shell meta-man page
SYNOPSIS
Because zsh contains many features, the zsh manual has been split into
a number of sections. This manual page includes all the separate man‐
ual pages in the following order:
zshmisc Anything not fitting into the other sections
zshexpn Zsh command and parameter expansion
zshparam Zsh parameters
zshoptions Zsh options
zshbuiltins Zsh built-in functions
zshzle Zsh command line editing
zshcompwid Zsh completion widgets
zshcompsys Zsh completion system
zshcompctl Zsh completion control
zshmodules Zsh loadable modules
zshzftpsys Zsh built-in FTP client
DESCRIPTION
Zsh is a UNIX command interpreter (shell) usable as an interactive
login shell and as a shell script command processor. Of the standard
shells, zsh most closely resembles ksh but includes many enhancements.
Zsh has command line editing, builtin spelling correction, programmable
command completion, shell functions (with autoloading), a history mech‐
anism, and a host of other features.
AUTHOR
Zsh was originally written by Paul Falstad <pf@zsh.org>. Zsh is now
maintained by the members of the zsh-workers mailing list <zsh-work‐
ers@sunsite.dk>. The development is currently coordinated by Peter
Stephenson <pws@zsh.org>. The coordinator can be contacted at <coordi‐
nator@zsh.org>, but matters relating to the code should generally go to
the mailing list.
AVAILABILITY
Zsh is available from the following anonymous FTP sites. These mirror
sites are kept frequently up to date. The sites marked with (H) may be
mirroring ftp.cs.elte.hu instead of the primary site.
Primary site
ftp://ftp.zsh.org/pub/zsh/
http://www.zsh.org/pub/zsh/
Australia
ftp://ftp.zsh.org/pub/zsh/
http://www.zsh.org/pub/zsh/
ftp://ftp.ips.gov.au/pub/packages/zsh/ (H)
Denmark
ftp://sunsite.dk/pub/unix/shells/zsh/
Finland
ftp://ftp.funet.fi/pub/unix/shells/zsh/
France
ftp://ftp.cenatls.cena.dgac.fr/shells/zsh/
Germany
ftp://ftp.fu-berlin.de/pub/unix/shells/zsh/ (H)
ftp://ftp.gmd.de/packages/zsh/
ftp://ftp.uni-trier.de/pub/unix/shell/zsh/
Hungary
ftp://ftp.cs.elte.hu/pub/zsh/
http://www.cs.elte.hu/pub/zsh/
ftp://ftp.kfki.hu/pub/packages/zsh/
Israel
ftp://ftp.math.technion.ac.il/pub/zsh/
http://www.math.technion.ac.il/pub/zsh/
Italy
ftp://ftp.unina.it/pub/Unix/pkgs/shell/zsh/
Japan
ftp://ftp.nisiq.net/pub/shells/zsh/ (H)
ftp://ftp.win.ne.jp/pub/shell/zsh/
Norway
ftp://ftp.uit.no/pub/unix/shells/zsh/
Poland
ftp://sunsite.icm.edu.pl/pub/unix/shells/zsh/
Romania
ftp://ftp.roedu.net/pub/mirrors/ftp.zsh.org/pub/zsh/
ftp://ftp.kappa.ro/pub/mirrors/ftp.zsh.org/pub/zsh/
Slovenia
ftp://ftp.siol.net/mirrors/zsh/
Sweden
ftp://ftp.lysator.liu.se/pub/unix/zsh/
UK
ftp://ftp.net.lut.ac.uk/zsh/
ftp://sunsite.org.uk/packages/zsh/
USA
ftp://uiarchive.uiuc.edu/pub/packages/shells/zsh/
ftp://ftp.rge.com/pub/shells/zsh/
ftp://foad.org/pub/zsh/
http://foad.org/zsh/
MAILING LISTS
Zsh has 3 mailing lists:
<zsh-announce@sunsite.dk>
Announcements about releases, major changes in the shell and the
monthly posting of the Zsh FAQ. (moderated)
<zsh-users@sunsite.dk>
User discussions.
<zsh-workers@sunsite.dk>
Hacking, development, bug reports and patches.
To subscribe or unsubscribe, send mail to the associated administrative
address for the mailing list.
<zsh-announce-subscribe@sunsite.dk>
<zsh-users-subscribe@sunsite.dk>
<zsh-workers-subscribe@sunsite.dk>
<zsh-announce-unsubscribe@sunsite.dk>
<zsh-users-unsubscribe@sunsite.dk>
<zsh-workers-unsubscribe@sunsite.dk>
YOU ONLY NEED TO JOIN ONE OF THE MAILING LISTS AS THEY ARE NESTED. All
submissions to zsh-announce are automatically forwarded to zsh-users.
All submissions to zsh-users are automatically forwarded to zsh-work‐
ers.
If you have problems subscribing/unsubscribing to any of the mailing
lists, send mail to <listmaster@zsh.org>. The mailing lists are main‐
tained by Karsten Thygesen <karthy@kom.auc.dk>.
The mailing lists are archived; the archives can be accessed via the
administrative addresses listed above. There is also a hypertext ar‐
chive, maintained by Geoff Wing <gcw@zsh.org>, available at
http://www.zsh.org/mla/.
THE ZSH FAQ
Zsh has a list of Frequently Asked Questions (FAQ), maintained by Peter
Stephenson <pws@zsh.org>. It is regularly posted to the newsgroup
comp.unix.shell and the zsh-announce mailing list. The latest version
can be found at any of the Zsh FTP sites, or at
http://www.zsh.org/FAQ/. The contact address for FAQ-related matters
is <faqmaster@zsh.org>.
THE ZSH WEB PAGE
Zsh has a web page which is located at http://www.zsh.org/. This is
maintained by Karsten Thygesen <karthy@zsh.org>, of SunSITE Denmark.
The contact address for web-related matters is <webmaster@zsh.org>.
THE ZSH USERGUIDE
A userguide is currently in preparation. It is intended to complement
the manual, with explanations and hints on issues where the manual can
be cabbalistic, hierographic, or downright mystifying (for example, the
word `hierographic' does not exist). It can be viewed in its current
state at http://zsh.sunsite.dk/Guide/. At the time of writing, chap‐
ters dealing with startup files and their contents and the new comple‐
tion system were essentially complete.
INVOCATION OPTIONS
The following flags are interpreted by the shell when invoked to deter‐
mine where the shell will read commands from:
-c Take the first argument as a command to execute, rather than
reading commands from a script or standard input. If any fur‐
ther arguments are given, the first one is assigned to $0,
rather than being used as a positional parameter.
-i Force shell to be interactive.
-s Force shell to read commands from the standard input. If the -s
flag is not present and an argument is given, the first argument
is taken to be the pathname of a script to execute.
After the first one or two arguments have been appropriated as
described above, the remaining arguments are assigned to the positional
parameters.
For further options, which are common to invocation and the set
builtin, see zshoptions(1).
Options may be specified by name using the -o option. -o acts like a
single-letter option, but takes a following string as the option name.
For example,
zsh -x -o shwordsplit scr
runs the script scr, setting the XTRACE option by the corresponding
letter `-x' and the SH_WORD_SPLIT option by name. Options may be
turned off by name by using +o instead of -o.-o can be stacked up
with preceding single-letter options, so for example `-xo shwordsplit'
or `-xoshwordsplit' is equivalent to `-x -o shwordsplit'.
Options may also be specified by name in GNU long option style,
`--option-name'. When this is done, `-' characters in the option name
are permitted: they are translated into `_', and thus ignored. So, for
example, `zsh --sh-word-split' invokes zsh with the SH_WORD_SPLIT
option turned on. Like other option syntaxes, options can be turned
off by replacing the initial `-' with a `+'; thus `+-sh-word-split' is
equivalent to `--no-sh-word-split'. Unlike other option syntaxes,
GNU-style long options cannot be stacked with any other options, so for
example `-x-shwordsplit' is an error, rather than being treated like
`-x --shwordsplit'.
The special GNU-style option `--version' is handled; it sends to stan‐
dard output the shell's version information, then exits successfully.
`--help' is also handled; it sends to standard output a list of options
that can be used when invoking the shell, then exits successfully.
Option processing may be finished, allowing following arguments that
start with `-' or `+' to be treated as normal arguments, in two ways.
Firstly, a lone `-' (or `+') as an argument by itself ends option pro‐
cessing. Secondly, a special option `--' (or `+-'), which may be spec‐
ified on its own (which is the standard POSIX usage) or may be stacked
with preceding options (so `-x-' is equivalent to `-x --'). Options
are not permitted to be stacked after `--' (so `-x-f' is an error), but
note the GNU-style option form discussed above, where `--shwordsplit'
is permitted and does not end option processing.
Except when the sh/ksh emulation single-letter options are in effect,
the option `-b' (or `+b') ends option processing. `-b' is like `--',
except that further single-letter options can be stacked after the `-b'
and will take effect as normal.
COMPATIBILITY
Zsh tries to emulate sh or ksh when it is invoked as sh or ksh respec‐
tively; more precisely, it looks at the first letter of the name by
which it was invoked, excluding any initial `r' (assumed to stand for
`restricted'), and if that is `s' or `k' it will emulate sh or ksh.
Furthermore, if invoked as su (which happens on certain systems when
the shell is executed by the su command), the shell will try to find an
alternative name from the SHELL environment variable and perform emula‐
tion based on that.
In sh and ksh compatibility modes the following parameters are not spe‐
cial and not initialized by the shell: ARGC, argv, cdpath, fignore,
fpath, HISTCHARS, mailpath, MANPATH, manpath, path, prompt, PROMPT,
PROMPT2, PROMPT3, PROMPT4, psvar, status, watch.
The usual zsh startup/shutdown scripts are not executed. Login shells
source /etc/profile followed by $HOME/.profile. If the ENV environment
variable is set on invocation, $ENV is sourced after the profile
scripts. The value of ENV is subjected to parameter expansion, command
substitution, and arithmetic expansion before being interpreted as a
pathname. Note that the PRIVILEGED option also affects the execution
of startup files.
The following options are set if the shell is invoked as sh or ksh:
NO_BAD_PATTERN, NO_BANG_HIST, NO_BG_NICE, NO_EQUALS, NO_FUNC‐
TION_ARGZERO, GLOB_SUBST, NO_GLOBAL_EXPORT, NO_HUP, INTERACTIVE_COM‐
MENTS, KSH_ARRAYS, NO_MULTIOS, NO_NOMATCH, NO_NOTIFY, POSIX_BUILTINS,
NO_PROMPT_PERCENT, RM_STAR_SILENT, SH_FILE_EXPANSION, SH_GLOB,
SH_OPTION_LETTERS, SH_WORD_SPLIT. Additionally the BSD_ECHO and
IGNORE_BRACES options are set if zsh is invoked as sh. Also, the
KSH_OPTION_PRINT, LOCAL_OPTIONS, PROMPT_BANG, PROMPT_SUBST and SIN‐
GLE_LINE_ZLE options are set if zsh is invoked as ksh.
RESTRICTED SHELL
When the basename of the command used to invoke zsh starts with the
letter `r' or the `-r' command line option is supplied at invocation,
the shell becomes restricted. Emulation mode is determined after
stripping the letter `r' from the invocation name. The following are
disabled in restricted mode:
· changing directories with the cd builtin
· changing or unsetting the PATH, path, MODULE_PATH, module_path,
SHELL, HISTFILE, HISTSIZE, GID, EGID, UID, EUID, USERNAME,
LD_LIBRARY_PATH, LD_AOUT_LIBRARY_PATH, LD_PRELOAD and
LD_AOUT_PRELOAD parameters
· specifying command names containing /
· specifying command pathnames using hash
· redirecting output to files
· using the exec builtin command to replace the shell with another
command
· using jobs -Z to overwrite the shell process' argument and envi‐
ronment space
· using the ARGV0 parameter to override argv[0] for external com‐
mands
· turning off restricted mode with set +r or unsetopt RESTRICTED
These restrictions are enforced after processing the startup files.
The startup files should set up PATH to point to a directory of com‐
mands which can be safely invoked in the restricted environment. They
may also add further restrictions by disabling selected builtins.
Restricted mode can also be activated any time by setting the
RESTRICTED option. This immediately enables all the restrictions
described above even if the shell still has not processed all startup
files.
STARTUP/SHUTDOWN FILES
Commands are first read from /etc/zshenv; this cannot be overridden.
Subsequent behaviour is modified by the RCS and GLOBAL_RCS options; the
former affects all startup files, while the second only affects those
in the /etc directory. If one of the options is unset at any point,
any subsequent startup file(s) of the corresponding type will not be
read. It is also possible for a file in $ZDOTDIR to re-enable
GLOBAL_RCS. Both RCS and GLOBAL_RCS are set by default.
Commands are then read from $ZDOTDIR/.zshenv. If the shell is a login
shell, commands are read from /etc/zprofile and then $ZDOTDIR/.zpro‐
file. Then, if the shell is interactive, commands are read from
/etc/zshrc and then $ZDOTDIR/.zshrc. Finally, if the shell is a login
shell, /etc/zlogin and $ZDOTDIR/.zlogin are read.
When a login shell exits, the files $ZDOTDIR/.zlogout and then
/etc/zlogout are read. This happens with either an explicit exit via
the exit or logout commands, or an implicit exit by reading end-of-file
from the terminal. However, if the shell terminates due to exec'ing
another process, the logout files are not read. These are also
affected by the RCS and GLOBAL_RCS options. Note also that the RCS
option affects the saving of history files, i.e. if RCS is unset when
the shell exits, no history file will be saved.
If ZDOTDIR is unset, HOME is used instead. Those files listed above as
being in /etc may be in another directory, depending on the installa‐
tion.
As /etc/zshenv is run for all instances of zsh, it is important that it
be kept as small as possible. In particular, it is a good idea to put
code that does not need to be run for every single shell behind a test
of the form `if [[ -o rcs ]]; then ...' so that it will not be executed
when zsh is invoked with the `-f' option.
Any of these files may be pre-compiled with the zcompile builtin com‐
mand (see zshbuiltins(1)). If a compiled file exists (named for the
original file plus the .zwc extension) and it is newer than the origi‐
nal file, the compiled file will be used instead.
ZSHMISC(1)ZSHMISC(1)NAME
zshmisc - everything and then some
SIMPLE COMMANDS & PIPELINES
A simple command is a sequence of optional parameter assignments fol‐
lowed by blank-separated words, with optional redirections inter‐
spersed. The first word is the command to be executed, and the remain‐
ing words, if any, are arguments to the command. If a command name is
given, the parameter assignments modify the environment of the command
when it is executed. The value of a simple command is its exit status,
or 128 plus the signal number if terminated by a signal. For example,
echo foo
is a simple command with arguments.
A pipeline is either a simple command, or a sequence of two or more
simple commands where each command is separated from the next by `|' or
`|&'. Where commands are separated by `|', the standard output of the
first command is connected to the standard input of the next. `|&' is
shorthand for `2>&1 |', which connects both the standard output and the
standard error of the command to the standard input of the next. The
value of a pipeline is the value of the last command, unless the pipe‐
line is preceded by `!' in which case the value is the logical inverse
of the value of the last command. For example,
echo foo | sed 's/foo/bar/'
is a pipeline, where the output (`foo' plus a newline) of the first
command will be passed to the input of the second.
If a pipeline is preceded by `coproc', it is executed as a coprocess; a
two-way pipe is established between it and the parent shell. The shell
can read from or write to the coprocess by means of the `>&p' and `<&p'
redirection operators or with `print -p' and `read -p'. A pipeline
cannot be preceded by both `coproc' and `!'. If job control is active,
the coprocess can be treated in other than input and output as an ordi‐
nary background job.
A sublist is either a single pipeline, or a sequence of two or more
pipelines separated by `&&' or `||'. If two pipelines are separated by
`&&', the second pipeline is executed only if the first succeeds
(returns a zero value). If two pipelines are separated by `||', the
second is executed only if the first fails (returns a nonzero value).
Both operators have equal precedence and are left associative. The
value of the sublist is the value of the last pipeline executed. For
example,
dmesg | grep panic && print yes
is a sublist consisting of two pipelines, the second just a simple com‐
mand which will be executed if and only if the grep command returns a
zero value. If it does not, the value of the sublist is that return
value, else it is the value returned by the print (almost certainly
zero).
A list is a sequence of zero or more sublists, in which each sublist is
terminated by `;', `&', `&|', `&!', or a newline. This terminator may
optionally be omitted from the last sublist in the list when the list
appears as a complex command inside `(...)' or `{...}'. When a sub‐
list is terminated by `;' or newline, the shell waits for it to finish
before executing the next sublist. If a sublist is terminated by a
`&', `&|', or `&!', the shell executes the last pipeline in it in the
background, and does not wait for it to finish (note the difference
from other shells which execute the whole sublist in the background).
A backgrounded pipeline returns a status of zero.
More generally, a list can be seen as a set of any shell commands what‐
soever, including the complex commands below; this is implied wherever
the word `list' appears in later descriptions. For example, the com‐
mands in a shell function form a special sort of list.
PRECOMMAND MODIFIERS
A simple command may be preceded by a precommand modifier, which will
alter how the command is interpreted. These modifiers are shell
builtin commands with the exception of nocorrect which is a reserved
word.
- The command is executed with a `-' prepended to its argv[0]
string.
noglob Filename generation (globbing) is not performed on any of the
words.
nocorrect
Spelling correction is not done on any of the words. This must
appear before any other precommand modifier, as it is inter‐
preted immediately, before any parsing is done. It has no
effect in non-interactive shells.
exec The command is executed in the parent shell without forking.
command
The command word is taken to be the name of an external command,
rather than a shell function or builtin.
builtin
The command word is taken to be the name of a builtin command,
rather than a shell function or external command.
COMPLEX COMMANDS
A complex command in zsh is one of the following:
if list then list [ elif list then list ] ... [ else list ] fi
The if list is executed, and if it returns a zero exit status,
the then list is executed. Otherwise, the elif list is executed
and if its value is zero, the then list is executed. If each
elif list returns nonzero, the else list is executed.
for name [ in word ... term ] do list done
where term is at least one newline or ;. Expand the list of
words, and set the parameter name to each of them in turn, exe‐
cuting list each time. If the in word is omitted, use the posi‐
tional parameters instead of the words.
for (( [expr1] ; [expr2] ; [expr3] )) do list done
The arithmetic expression expr1 is evaluated first (see the sec‐
tion `Arithmetic Evaluation'). The arithmetic expression expr2
is repeatedly evaluated until it evaluates to zero and when
non-zero, list is executed and the arithmetic expression expr3
evaluated. If any expression is omitted, then it behaves as if
it evaluated to 1.
while list do list done
Execute the do list as long as the while list returns a zero
exit status.
until list do list done
Execute the do list as long as until list returns a nonzero exit
status.
repeat word do list done
word is expanded and treated as an arithmetic expression, which
must evaluate to a number n. list is then executed n times.
case word in [ [(] pattern [ | pattern ] ... ) list (;;|;&) ] ... esac
Execute the list associated with the first pattern that matches
word, if any. The form of the patterns is the same as that used
for filename generation. See the section `Filename Generation'.
If the list that is executed is terminated with ;& rather than
;;, the following list is also executed. This continues until
either a list is terminated with ;; or the esac is reached.
select name [ in word ... term ] do list done
where term is one or more newline or ; to terminate the words.
Print the set of words, each preceded by a number. If the in
word is omitted, use the positional parameters. The PROMPT3
prompt is printed and a line is read from the line editor if the
shell is interactive and that is active, or else standard input.
If this line consists of the number of one of the listed words,
then the parameter name is set to the word corresponding to this
number. If this line is empty, the selection list is printed
again. Otherwise, the value of the parameter name is set to
null. The contents of the line read from standard input is
saved in the parameter REPLY. list is executed for each selec‐
tion until a break or end-of-file is encountered.
( list )
Execute list in a subshell. Traps set by the trap builtin are
reset to their default values while executing list.
{ list }
Execute list.
function word ... [ () ] [ term ] { list }
word ... () [ term ] { list }
word ... () [ term ] command
where term is one or more newline or ;. Define a function which
is referenced by any one of word. Normally, only one word is
provided; multiple words are usually only useful for setting
traps. The body of the function is the list between the { and
}. See the section `Functions'.
If the option SH_GLOB is set for compatibility with other
shells, then whitespace may appear between between the left and
right parentheses when there is a single word; otherwise, the
parentheses will be treated as forming a globbing pattern in
that case.
time [ pipeline ]
The pipeline is executed, and timing statistics are reported on
the standard error in the form specified by the TIMEFMT parame‐
ter. If pipeline is omitted, print statistics about the shell
process and its children.
[[ exp ]]
Evaluates the conditional expression exp and return a zero exit
status if it is true. See the section `Conditional Expressions'
for a description of exp.
ALTERNATE FORMS FOR COMPLEX COMMANDS
Many of zsh's complex commands have alternate forms. These particular
versions of complex commands should be considered deprecated and may be
removed in the future. The versions in the previous section should be
preferred instead.
The short versions below only work if sublist is of the form `{ list }'
or if the SHORT_LOOPS option is set. For the if, while and until com‐
mands, in both these cases the test part of the loop must also be suit‐
ably delimited, such as by `[[ ... ]]' or `(( ... ))', else the end of
the test will not be recognized. For the for, repeat, case and select
commands no such special form for the arguments is necessary, but the
other condition (the special form of sublist or use of the SHORT_LOOPS
option) still applies.
if list { list } [ elif list { list } ] ... [ else { list } ]
An alternate form of if. The rules mean that
if [[ -o ignorebraces ]] {
print yes
}
works, but
if true { # Does not work!
print yes
}
does not, since the test is not suitably delimited.
if list sublist
A short form of the alternate `if'. The same limitations on the
form of list apply as for the previous form.
for name ( word ... ) sublist
A short form of for.
for name [ in word ... term ] sublist
where term is at least one newline or ;. Another short form of
for.
for (( [expr1] ; [expr2] ; [expr3] )) sublist
A short form of the arithmetic for command.
foreach name ( word ... ) list end
Another form of for.
while list { list }
An alternative form of while. Note the limitations on the form
of list mentioned above.
until list { list }
An alternative form of until. Note the limitations on the form
of list mentioned above.
repeat word sublist
This is a short form of repeat.
case word { [ [(] pattern [ | pattern ] ... ) list (;;|;&) ] ... }
An alternative form of case.
select name [ in word term ] sublist
where term is at least one newline or ;. A short form of
select.
RESERVED WORDS
The following words are recognized as reserved words when used as the
first word of a command unless quoted or disabled using disable -r:
do done esac then elif else fi for case if while function repeat time
until select coproc nocorrect foreach end ! [[ { }
Additionally, `}' is recognized in any position if the IGNORE_BRACES
option is not set.
COMMENTS
In noninteractive shells, or in interactive shells with the INTERAC‐
TIVE_COMMENTS option set, a word beginning with the third character of
the histchars parameter (`#' by default) causes that word and all the
following characters up to a newline to be ignored.
ALIASING
Every token in the shell input is checked to see if there is an alias
defined for it. If so, it is replaced by the text of the alias if it
is in command position (if it could be the first word of a simple com‐
mand), or if the alias is global. If the text ends with a space, the
next word in the shell input is treated as though it were in command
position for purposes of alias expansion. An alias is defined using
the alias builtin; global aliases may be defined using the -g option to
that builtin.
Alias expansion is done on the shell input before any other expansion
except history expansion. Therefore, if an alias is defined for the
word foo, alias expansion may be avoided by quoting part of the word,
e.g. \foo. But there is nothing to prevent an alias being defined for
\foo as well.
QUOTING
A character may be quoted (that is, made to stand for itself) by pre‐
ceding it with a `\'. `\' followed by a newline is ignored.
A string enclosed between `$'' and `'' is processed the same way as the
string arguments of the print builtin, and the resulting string is con‐
sidered to be entirely quoted. A literal `'' character can be included
in the string by using the `\'' escape.
All characters enclosed between a pair of single quotes ('') that is
not preceded by a `$' are quoted. A single quote cannot appear within
single quotes unless the option RC_QUOTES is set, in which case a pair
of single quotes are turned into a single quote. For example,
print ''''
outputs nothing apart from a newline if RC_QUOTES is not set, but one
single quote if it is set.
Inside double quotes (""), parameter and command substitution occur,
and `\' quotes the characters `\', ``', `"', and `$'.
REDIRECTION
If a command is followed by & and job control is not active, then the
default standard input for the command is the empty file /dev/null.
Otherwise, the environment for the execution of a command contains the
file descriptors of the invoking shell as modified by input/output
specifications.
The following may appear anywhere in a simple command or may precede or
follow a complex command. Expansion occurs before word or digit is
used except as noted below. If the result of substitution on word pro‐
duces more than one filename, redirection occurs for each separate
filename in turn.
< word Open file word for reading as standard input.
<> word
Open file word for reading and writing as standard input. If
the file does not exist then it is created.
> word Open file word for writing as standard output. If the file does
not exist then it is created. If the file exists, and the CLOB‐
BER option is unset, this causes an error; otherwise, it is
truncated to zero length.
>| word
>! word
Same as >, except that the file is truncated to zero length if
it exists, even if CLOBBER is unset.
>> word
Open file word for writing in append mode as standard output.
If the file does not exist, and the CLOBBER option is unset,
this causes an error; otherwise, the file is created.
>>| word
>>! word
Same as >>, except that the file is created if it does not
exist, even if CLOBBER is unset.
<<[-] word
The shell input is read up to a line that is the same as word,
or to an end-of-file. No parameter expansion, command substitu‐
tion or filename generation is performed on word. The resulting
document, called a here-document, becomes the standard input.
If any character of word is quoted with single or double quotes
or a `\', no interpretation is placed upon the characters of the
document. Otherwise, parameter and command substitution occurs,
`\' followed by a newline is removed, and `\' must be used to
quote the characters `\', `$', ``' and the first character of
word.
If <<- is used, then all leading tabs are stripped from word and
from the document.
<<< word
Perform shell expansion on word and pass the result to standard
input. This is known as a here-string.
<& number
>& number
The standard input/output is duplicated from file descriptor
number (see dup2(2)).
<& -
>& - Close the standard input/output.
<& p
>& p The input/output from/to the coprocess is moved to the standard
input/output.
>& word
&> word
(Except where `>& word' matches one of the above syntaxes; `&>'
can always be used to avoid this ambiguity.) Redirects both
standard output and standard error (file descriptor 2) in the
manner of `> word'. Note that this does not have the same
effect as `> word 2>&1' in the presence of multios (see the sec‐
tion below).
>&| word
>&! word
&>| word
&>! word
Redirects both standard output and standard error (file descrip‐
tor 2) in the manner of `>| word'.
>>& word
&>> word
Redirects both standard output and standard error (file descrip‐
tor 2) in the manner of `>> word'.
>>&| word
>>&! word
&>>| word
&>>! word
Redirects both standard output and standard error (file descrip‐
tor 2) in the manner of `>>| word'.
If one of the above is preceded by a digit, then the file descriptor
referred to is that specified by the digit instead of the default 0 or
1. The order in which redirections are specified is significant. The
shell evaluates each redirection in terms of the (file descriptor,
file) association at the time of evaluation. For example:
... 1>fname 2>&1
first associates file descriptor 1 with file fname. It then associates
file descriptor 2 with the file associated with file descriptor 1 (that
is, fname). If the order of redirections were reversed, file descrip‐
tor 2 would be associated with the terminal (assuming file descriptor 1
had been) and then file descriptor 1 would be associated with file
fname.
MULTIOS
If the user tries to open a file descriptor for writing more than once,
the shell opens the file descriptor as a pipe to a process that copies
its input to all the specified outputs, similar to tee, provided the
MULTIOS option is set, as it is by default. Thus:
date >foo >bar
writes the date to two files, named `foo' and `bar'. Note that a pipe
is an implicit redirection; thus
date >foo | cat
writes the date to the file `foo', and also pipes it to cat.
If the MULTIOS option is set, the word after a redirection operator is
also subjected to filename generation (globbing). Thus
: > *
will truncate all files in the current directory, assuming there's at
least one. (Without the MULTIOS option, it would create an empty file
called `*'.) Similarly, you can do
echo exit 0 >> *.sh
If the user tries to open a file descriptor for reading more than once,
the shell opens the file descriptor as a pipe to a process that copies
all the specified inputs to its output in the order specified, similar
to cat, provided the MULTIOS option is set. Thus
sort <foo <fubar
or even
sort <f{oo,ubar}
is equivalent to `cat foo fubar | sort'.
Note that a pipe is an implicit redirection; thus
cat bar | sort <foo
is equivalent to `cat bar foo | sort' (note the order of the inputs).
If the MULTIOS option is unset, each redirection replaces the previous
redirection for that file descriptor. However, all files redirected to
are actually opened, so
echo foo > bar > baz
when MULTIOS is unset will truncate bar, and write `foo' into baz.
REDIRECTIONS WITH NO COMMAND
When a simple command consists of one or more redirection operators and
zero or more parameter assignments, but no command name, zsh can behave
in several ways.
If the parameter NULLCMD is not set or the option CSH_NULLCMD is set,
an error is caused. This is the csh behavior and CSH_NULLCMD is set by
default when emulating csh.
If the option SH_NULLCMD is set, the builtin `:' is inserted as a com‐
mand with the given redirections. This is the default when emulating
sh or ksh.
Otherwise, if the parameter NULLCMD is set, its value will be used as a
command with the given redirections. If both NULLCMD and READNULLCMD
are set, then the value of the latter will be used instead of that of
the former when the redirection is an input. The default for NULLCMD
is `cat' and for READNULLCMD is `more'. Thus
< file
shows the contents of file on standard output, with paging if that is a
terminal. NULLCMD and READNULLCMD may refer to shell functions.
COMMAND EXECUTION
If a command name contains no slashes, the shell attempts to locate it.
If there exists a shell function by that name, the function is invoked
as described in the section `Functions'. If there exists a shell
builtin by that name, the builtin is invoked.
Otherwise, the shell searches each element of $path for a directory
containing an executable file by that name. If the search is unsuc‐
cessful, the shell prints an error message and returns a nonzero exit
status.
If execution fails because the file is not in executable format, and
the file is not a directory, it is assumed to be a shell script.
/bin/sh is spawned to execute it. If the program is a file beginning
with `#!', the remainder of the first line specifies an interpreter for
the program. The shell will execute the specified interpreter on oper‐
ating systems that do not handle this executable format in the kernel.
FUNCTIONS
Shell functions are defined with the function reserved word or the spe‐
cial syntax `funcname ()'. Shell functions are read in and stored
internally. Alias names are resolved when the function is read. Func‐
tions are executed like commands with the arguments passed as posi‐
tional parameters. (See the section `Command Execution'.)
Functions execute in the same process as the caller and share all files
and present working directory with the caller. A trap on EXIT set
inside a function is executed after the function completes in the envi‐
ronment of the caller.
The return builtin is used to return from function calls.
Function identifiers can be listed with the functions builtin. Func‐
tions can be undefined with the unfunction builtin.
AUTOLOADING FUNCTIONS
A function can be marked as undefined using the autoload builtin (or
`functions -u' or `typeset -fu'). Such a function has no body. When
the function is first executed, the shell searches for its definition
using the elements of the fpath variable. Thus to define functions for
autoloading, a typical sequence is:
fpath=(~/myfuncs $fpath)
autoload myfunc1 myfunc2 ...
The usual alias expansion during reading will be suppressed if the
autoload builtin or its equivalent is given the option -U. This is rec‐
ommended for the use of functions supplied with the zsh distribution.
Note that for functions precompiled with the zcompile builtin command
the flag -U must be provided when the .zwc file is created, as the cor‐
responding information is compiled into the latter.
For each element in fpath, the shell looks for three possible files,
the newest of which is used to load the definition for the function:
element.zwc
A file created with the zcompile builtin command, which is
expected to contain the definitions for all functions in the
directory named element. The file is treated in the same manner
as a directory containing files for functions and is searched
for the definition of the function. If the definition is not
found, the search for a definition proceeds with the other two
possibilities described below.
If element already includes a .zwc extension (i.e. the extension
was explicitly given by the user), element is searched for the
definition of the function without comparing its age to that of
other files; in fact, there does not need to be any directory
named element without the suffix. Thus including an element
such as `/usr/local/funcs.zwc' in fpath will speed up the search
for functions, with the disadvantage that functions included
must be explicitly recompiled by hand before the shell notices
any changes.
element/function.zwc
A file created with zcompile, which is expected to contain the
definition for function. It may include other function defini‐
tions as well, but those are neither loaded nor executed; a file
found in this way is searched only for the definition of func‐
tion.
element/function
A file of zsh command text, taken to be the definition for func‐
tion.
In summary, the order of searching is, first, in the parents of direc‐
tories in fpath for the newer of either a compiled directory or a
directory in fpath; second, if more than one of these contains a defi‐
nition for the function that is sought, the leftmost in the fpath is
chosen; and third, within a directory, the newer of either a compiled
function or an ordinary function definition is used.
If the KSH_AUTOLOAD option is set, or the file contains only a simple
definition of the function, the file's contents will be executed. This
will normally define the function in question, but may also perform
initialization, which is executed in the context of the function execu‐
tion, and may therefore define local parameters. It is an error if the
function is not defined by loading the file.
Otherwise, the function body (with no surrounding `funcname() {...}')
is taken to be the complete contents of the file. This form allows the
file to be used directly as an executable shell script. If processing
of the file results in the function being re-defined, the function
itself is not re-executed. To force the shell to perform initializa‐
tion and then call the function defined, the file should contain ini‐
tialization code (which will be executed then discarded) in addition to
a complete function definition (which will be retained for subsequent
calls to the function), and a call to the shell function, including any
arguments, at the end.
For example, suppose the autoload file func contains
func() { print This is func; }
print func is initialized
then `func; func' with KSH_AUTOLOAD set will produce both messages on
the first call, but only the message `This is func' on the second and
subsequent calls. Without KSH_AUTOLOAD set, it will produce the ini‐
tialization message on the first call, and the other message on the
second and subsequent calls.
It is also possible to create a function that is not marked as
autoloaded, but which loads its own definition by searching fpath, by
using `autoload -X' within a shell function. For example, the follow‐
ing are equivalent:
myfunc() {
autoload -X
}
myfunc args...
and
unfunction myfunc # if myfunc was defined
autoload myfunc
myfunc args...
In fact, the functions command outputs `builtin autoload -X' as the
body of an autoloaded function. A true autoloaded function can be
identified by the presence of the comment `# undefined' in the body,
because all comments are discarded from defined functions. This is
done so that
eval "$(functions)"
produces a reasonable result.
To load the definition of an autoloaded function myfunc without execut‐
ing myfunc, use:
autoload +X myfunc
SPECIAL FUNCTIONS
The following functions, if defined, have special meaning to the shell:
chpwd Executed whenever the current working directory is changed.
periodic
If the parameter PERIOD is set, this function is executed every
$PERIOD seconds, just before a prompt.
precmd Executed before each prompt.
preexec
Executed just after a command has been read and is about to be
executed. If the history mechanism is active (and the line was
not discarded from the history buffer), the string that the user
typed is passed as the first argument, otherwise it is an empty
string. The actual command that will be executed (including
expanded aliases) is passed in two different forms: the second
argument is a single-line, size-limited version of the command
(with things like function bodies elided); the third argument
contains the full text what what is being executed.
TRAPNAL
If defined and non-null, this function will be executed whenever
the shell catches a signal SIGNAL, where NAL is a signal name as
specified for the kill builtin. The signal number will be
passed as the first parameter to the function.
If a function of this form is defined and null, the shell and
processes spawned by it will ignore SIGNAL.
TRAPDEBUG
Executed after each command.
TRAPEXIT
Executed when the shell exits, or when the current function
exits if defined inside a function.
TRAPZERR
Executed whenever a command has a non-zero exit status. How‐
ever, the function is not executed if the command occurred in a
sublist followed by `&&' or `||'; only the final command in a
sublist of this type causes the trap to be executed.
The functions beginning `TRAP' may alternatively be defined with the
trap builtin: this may be preferable for some uses, as they are then
run in the environment of the calling process, rather than in their own
function environment. Apart from the difference in calling procedure
and the fact that the function form appears in lists of functions, the
forms
TRAPNAL() {
# code
}
and
trap '
# code
are equivalent.
JOBS
If the MONITOR option is set, an interactive shell associates a job
with each pipeline. It keeps a table of current jobs, printed by the
jobs command, and assigns them small integer numbers. When a job is
started asynchronously with `&', the shell prints a line which looks
like:
[1] 1234
indicating that the job which was started asynchronously was job number
1 and had one (top-level) process, whose process ID was 1234.
If a job is started with `&|' or `&!', then that job is immediately
disowned. After startup, it does not have a place in the job table,
and is not subject to the job control features described here.
If you are running a job and wish to do something else you may hit the
key ^Z (control-Z) which sends a TSTP signal to the current job: this
key may be redefined by the susp option of the external stty command.
The shell will then normally indicate that the job has been `sus‐
pended', and print another prompt. You can then manipulate the state
of this job, putting it in the background with the bg command, or run
some other commands and then eventually bring the job back into the
foreground with the foreground command fg. A ^Z takes effect immedi‐
ately and is like an interrupt in that pending output and unread input
are discarded when it is typed.
A job being run in the background will suspend if it tries to read from
the terminal. Background jobs are normally allowed to produce output,
but this can be disabled by giving the command `stty tostop'. If you
set this tty option, then background jobs will suspend when they try to
produce output like they do when they try to read input.
When a command is suspended and continued later with the fg or wait
builtins, zsh restores tty modes that were in effect when it was sus‐
pended. This (intentionally) does not apply if the command is contin‐
ued via `kill -CONT', nor when it is continued with bg.
There are several ways to refer to jobs in the shell. A job can be
referred to by the process ID of any process of the job or by one of
the following:
%number
The job with the given number.
%string
Any job whose command line begins with string.
%?string
Any job whose command line contains string.
%% Current job.
%+ Equivalent to `%%'.
%- Previous job.
The shell learns immediately whenever a process changes state. It nor‐
mally informs you whenever a job becomes blocked so that no further
progress is possible. If the NOTIFY option is not set, it waits until
just before it prints a prompt before it informs you.
When the monitor mode is on, each background job that completes trig‐
gers any trap set for CHLD.
When you try to leave the shell while jobs are running or suspended,
you will be warned that `You have suspended (running) jobs'. You may
use the jobs command to see what they are. If you do this or immedi‐
ately try to exit again, the shell will not warn you a second time; the
suspended jobs will be terminated, and the running jobs will be sent a
SIGHUP signal, if the HUP option is set.
To avoid having the shell terminate the running jobs, either use the
nohup command (see nohup(1)) or the disown builtin.
SIGNALS
The INT and QUIT signals for an invoked command are ignored if the com‐
mand is followed by `&' and the MONITOR option is not active. Other‐
wise, signals have the values inherited by the shell from its parent
(but see the TRAPNAL special functions in the section `Functions').
ARITHMETIC EVALUATION
The shell can perform integer and floating point arithmetic, either
using the builtin let, or via a substitution of the form $((...)). For
integers, the shell is usually compiled to use 8-byte precision where
this is available, otherwise precision is 4 bytes. This can be tested,
for example, by giving the command `print - $(( 12345678901 ))'; if the
number appears unchanged, the precision is at least 8 bytes. Floating
point arithmetic is always double precision.
The let builtin command takes arithmetic expressions as arguments; each
is evaluated separately. Since many of the arithmetic operators, as
well as spaces, require quoting, an alternative form is provided: for
any command which begins with a `((', all the characters until a match‐
ing `))' are treated as a quoted expression and arithmetic expansion
performed as for an argument of let. More precisely, `((...))' is
equivalent to `let "..."'. For example, the following statement
(( val = 2 + 1 ))
is equivalent to
let "val = 2 + 1"
both assigning the value 3 to the shell variable var and returning a
zero status.
Integers can be in bases other than 10. A leading `0x' or `0X' denotes
hexadecimal. Integers may also be of the form `base#n', where base is
a decimal number between two and thirty-six representing the arithmetic
base and n is a number in that base (for example, `16#ff' is 255 in
hexadecimal). The base# may also be omitted, in which case base 10 is
used. For backwards compatibility the form `[base]n' is also accepted.
It is also possible to specify a base to be used for output in the form
`[#base]', for example `[#16]'. This is used when outputting arith‐
metical substitutions or when assigning to scalar parameters, but an
explicitly defined integer or floating point parameter will not be
affected. If an integer variable is implicitly defined by an arith‐
metic expression, any base specified in this way will be set as the
variable's output arithmetic base as if the option `-i base' to the
typeset builtin had been used. The expression has no precedence and if
it occurs more than once in a mathematical expression, the last encoun‐
tered is used. For clarity it is recommended that it appear at the
beginning of an expression. As an example:
typeset -i 16 y
print $(( [#8] x = 32, y = 32 ))
print $x $y
outputs first `8#40', the rightmost value in the given output base, and
then `8#40 16#20', because y has been explicitly declared to have out‐
put base 16, while x (assuming it does not already exist) is implicitly
typed by the arithmetic evaluation, where it acquires the output base
8.
When an output base is specified using the `[#base]' syntax, an appro‐
priate base prefix will be output if necessary, so that the value out‐
put is valid syntax for input. If the # is doubled, for example
`[##16]', then no base prefix is output.
Floating point constants are recognized by the presence of a decimal
point or an exponent. The decimal point may be the first character of
the constant, but the exponent character e or E may not, as it will be
taken for a parameter name.
An arithmetic expression uses nearly the same syntax, precedence, and
associativity of expressions in C. The following operators are sup‐
ported (listed in decreasing order of precedence):
+ - ! ~ ++ --
unary plus/minus, logical NOT, complement, {pre,post}{in,de}cre‐
ment
<< >> bitwise shift left, right
& bitwise AND
^ bitwise XOR
| bitwise OR
** exponentiation
* / % multiplication, division, modulus (remainder)
+ - addition, subtraction
< > <= >=
comparison
== != equality and inequality
&& logical AND
|| ^^ logical OR, XOR
? : ternary operator
= += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= **=
assignment
, comma operator
The operators `&&', `||', `&&=', and `||=' are short-circuiting, and
only one of the latter two expressions in a ternary operator is evalu‐
ated. Note the precedence of the bitwise AND, OR, and XOR operators.
Mathematical functions can be called with the syntax `func(args)',
where the function decides if the args is used as a string or a
comma-separated list of arithmetic expressions. The shell currently
defines no mathematical functions by default, but the module zsh/math‐
func may be loaded with the zmodload builtin to provide standard float‐
ing point mathematical functions.
An expression of the form `##x' where x is any character sequence such
as `a', `^A', or `\M-\C-x' gives the ASCII value of this character and
an expression of the form `#foo' gives the ASCII value of the first
character of the value of the parameter foo. Note that this is differ‐
ent from the expression `$#foo', a standard parameter substitution
which gives the length of the parameter foo. `#\' is accepted instead
of `##', but its use is deprecated.
Named parameters and subscripted arrays can be referenced by name
within an arithmetic expression without using the parameter expansion
syntax. For example,
((val2 = val1 * 2))
assigns twice the value of $val1 to the parameter named val2.
An internal integer representation of a named parameter can be speci‐
fied with the integer builtin. Arithmetic evaluation is performed on
the value of each assignment to a named parameter declared integer in
this manner. Assigning a floating point number to an integer results
in rounding down to the next integer.
Likewise, floating point numbers can be declared with the float
builtin; there are two types, differing only in their output format, as
described for the typeset builtin. The output format can be bypassed
by using arithmetic substitution instead of the parameter substitution,
i.e. `${float}' uses the defined format, but `$((float))' uses a
generic floating point format.
Promotion of integer to floating point values is performed where neces‐
sary. In addition, if any operator which requires an integer (`~',
`&', `|', `^', `%', `<<', `>>' and their equivalents with assignment)
is given a floating point argument, it will be silently rounded down to
the next integer.
Scalar variables can hold integer or floating point values at different
times; there is no memory of the numeric type in this case.
If a variable is first assigned in a numeric context without previously
being declared, it will be implicitly typed as integer or float and
retain that type either until the type is explicitly changed or until
the end of the scope. This can have unforeseen consequences. For
example, in the loop
for (( f = 0; f < 1; f += 0.1 )); do
# use $f
done
if f has not already been declared, the first assignment will cause it
to be created as an integer, and consequently the operation `f += 0.1'
will always cause the result to be truncated to zero, so that the loop
will fail. A simple fix would be to turn the initialization into `f =
0.0'. It is therefore best to declare numeric variables with explicit
types.
CONDITIONAL EXPRESSIONS
A conditional expression is used with the [[ compound command to test
attributes of files and to compare strings. Each expression can be
constructed from one or more of the following unary or binary expres‐
sions:
-a file
true if file exists.
-b file
true if file exists and is a block special file.
-c file
true if file exists and is a character special file.
-d file
true if file exists and is a directory.
-e file
true if file exists.
-f file
true if file exists and is a regular file.
-g file
true if file exists and has its setgid bit set.
-h file
true if file exists and is a symbolic link.
-k file
true if file exists and has its sticky bit set.
-n string
true if length of string is non-zero.
-o option
true if option named option is on. option may be a single char‐
acter, in which case it is a single letter option name. (See
the section `Specifying Options'.)
-p file
true if file exists and is a FIFO special file (named pipe).
-r file
true if file exists and is readable by current process.
-s file
true if file exists and has size greater than zero.
-t fd true if file descriptor number fd is open and associated with a
terminal device. (note: fd is not optional)
-u file
true if file exists and has its setuid bit set.
-w file
true if file exists and is writable by current process.
-x file
true if file exists and is executable by current process. If
file exists and is a directory, then the current process has
permission to search in the directory.
-z string
true if length of string is zero.
-L file
true if file exists and is a symbolic link.
-O file
true if file exists and is owned by the effective user ID of
this process.
-G file
true if file exists and its group matches the effective group ID
of this process.
-S file
true if file exists and is a socket.
-N file
true if file exists and its access time is not newer than its
modification time.
file1 -nt file2
true if file1 exists and is newer than file2.
file1 -ot file2
true if file1 exists and is older than file2.
file1 -ef file2
true if file1 and file2 exist and refer to the same file.
string = pattern
string == pattern
true if string matches pattern. The `==' form is the preferred
one. The `=' form is for backward compatibility and should be
considered obsolete.
string != pattern
true if string does not match pattern.
string1 < string2
true if string1 comes before string2 based on ASCII value of
their characters.
string1 > string2
true if string1 comes after string2 based on ASCII value of
their characters.
exp1 -eq exp2
true if exp1 is numerically equal to exp2.
exp1 -ne exp2
true if exp1 is numerically not equal to exp2.
exp1 -lt exp2
true if exp1 is numerically less than exp2.
exp1 -gt exp2
true if exp1 is numerically greater than exp2.
exp1 -le exp2
true if exp1 is numerically less than or equal to exp2.
exp1 -ge exp2
true if exp1 is numerically greater than or equal to exp2.
( exp )
true if exp is true.
! exp true if exp is false.
exp1 && exp2
true if exp1 and exp2 are both true.
exp1 || exp2
true if either exp1 or exp2 is true.
Normal shell expansion is performed on the file, string and pattern
arguments, but the result of each expansion is constrained to be a sin‐
gle word, similar to the effect of double quotes. However, pattern
metacharacters are active for the pattern arguments; the patterns are
the same as those used for filename generation, see zshexpn(1), but
there is no special behaviour of `/' nor initial dots, and no glob
qualifiers are allowed.
In each of the above expressions, if file is of the form `/dev/fd/n',
where n is an integer, then the test applied to the open file whose
descriptor number is n, even if the underlying system does not support
the /dev/fd directory.
In the forms which do numeric comparison, the expressions exp undergo
arithmetic expansion as if they were enclosed in $((...)).
For example, the following:
[[ ( -f foo || -f bar ) && $report = y* ]] && print File exists.
tests if either file foo or file bar exists, and if so, if the value of
the parameter report begins with `y'; if the complete condition is
true, the message `File exists.' is printed.
PROMPT EXPANSION
Prompt sequences undergo a special form of expansion. This type of
expansion is also available using the -P option to the print builtin.
If the PROMPT_SUBST option is set, the prompt string is first subjected
to parameter expansion, command substitution and arithmetic expansion.
See zshexpn(1).
Certain escape sequences may be recognised in the prompt string.
If the PROMPT_BANG option is set, a `!' in the prompt is replaced by
the current history event number. A literal `!' may then be repre‐
sented as `!!'.
If the PROMPT_PERCENT option is set, certain escape sequences that
start with `%' are expanded. Some escapes take an optional integer
argument, which should appear between the `%' and the next character of
the sequence. The following escape sequences are recognized:
%% A `%'.
%) A `)'.
%d
%/ Present working directory ($PWD). If an integer follows the
`%', it specifies a number of trailing components of $PWD to
show; zero means the whole path. A negative integer specifies
leading components, i.e. %-1d specifies the first component.
%~ As %d and %/, but if $PWD has a named directory as its prefix,
that part is replaced by a `~' followed by the name of the
directory. If it starts with $HOME, that part is replaced by a
`~'.
%h
%! Current history event number.
%L The current value of $SHLVL.
%M The full machine hostname.
%m The hostname up to the first `.'. An integer may follow the `%'
to specify how many components of the hostname are desired.
With a negative integer, trailing components of the hostname are
shown.
%S (%s)
Start (stop) standout mode.
%U (%u)
Start (stop) underline mode.
%B (%b)
Start (stop) boldface mode.
%t
%@ Current time of day, in 12-hour, am/pm format.
%T Current time of day, in 24-hour format.
%* Current time of day in 24-hour format, with seconds.
%n $USERNAME.
%N The name of the script, sourced file, or shell function that zsh
is currently executing, whichever was started most recently. If
there is none, this is equivalent to the parameter $0. An inte‐
ger may follow the `%' to specify a number of trailing path com‐
ponents to show; zero means the full path. A negative integer
specifies leading components.
%i The line number currently being executed in the script, sourced
file, or shell function given by %N. This is most useful for
debugging as part of $PS4.
%w The date in day-dd format.
%W The date in mm/dd/yy format.
%D The date in yy-mm-dd format.
%D{string}
string is formatted using the strftime function. See strf‐
time(3) for more details. Three additional codes are available:
%f prints the day of the month, like %e but without any preced‐
ing space if the day is a single digit, and %K/%L correspond to
%k/%l for the hour of the day (24/12 hour clock) in the same
way.
%l The line (tty) the user is logged in on without /dev/ prefix.
If name starts with /dev/tty this is stripped.
%y The line (tty) the user is logged in on without /dev/ prefix.
It does not treat /dev/tty* specially.
%? The return code of the last command executed just before the
prompt.
%_ The status of the parser, i.e. the shell constructs (like `if'
and `for') that have been started on the command line. If given
an integer number that many strings will be printed; zero or
negative or no integer means print as many as there are. This
is most useful in prompts PS2 for continuation lines and PS4 for
debugging with the XTRACE option; in the latter case it will
also work non-interactively.
%E Clears to end of line.
%# A `#' if the shell is running with privileges, a `%' if not.
Equivalent to `%(!.#.%%)'. The definition of `privileged', for
these purposes, is that either the effective user ID is zero,
or, if POSIX.1e capabilities are supported, that at least one
capability is raised in either the Effective or Inheritable
capability vectors.
%v The value of the first element of the psvar array parameter.
Following the `%' with an integer gives that element of the
array. Negative integers count from the end of the array.
%{...%}
Include a string as a literal escape sequence. The string
within the braces should not change the cursor position. Brace
pairs can nest.
%(x.true-text.false-text)
Specifies a ternary expression. The character following the x
is arbitrary; the same character is used to separate the text
for the `true' result from that for the `false' result. This
separator may not appear in the true-text, except as part of a
%-escape sequence. A `)' may appear in the false-text as `%)'.
true-text and false-text may both contain arbitrarily-nested
escape sequences, including further ternary expressions.
The left parenthesis may be preceded or followed by a positive
integer n, which defaults to zero. A negative integer will be
multiplied by -1. The test character x may be any of the fol‐
lowing:
c
.
~ True if the current path, with prefix replacement, has at
least n elements.
/
C True if the current absolute path has at least n ele‐
ments.
t True if the time in minutes is equal to n.
T True if the time in hours is equal to n.
d True if the day of the month is equal to n.
D True if the month is equal to n (January = 0).
w True if the day of the week is equal to n (Sunday = 0).
? True if the exit status of the last command was n.
# True if the effective uid of the current process is n.
g True if the effective gid of the current process is n.
l True if at least n characters have already been printed
on the current line.
L True if the SHLVL parameter is at least n.
S True if the SECONDS parameter is at least n.
v True if the array psvar has at least n elements.
_ True if at least n shell constructs were started.
! True if the shell is running with privileges.
%<string<
%>string>
%[xstring]
Specifies truncation behaviour for the remainder of the prompt
string. The third, deprecated, form is equivalent to
`%xstringx', i.e. x may be `<' or `>'. The numeric argument,
which in the third form may appear immediately after the `[',
specifies the maximum permitted length of the various strings
that can be displayed in the prompt. The string will be dis‐
played in place of the truncated portion of any string; note
this does not undergo prompt expansion.
The forms with `<' truncate at the left of the string, and the
forms with `>' truncate at the right of the string. For exam‐
ple, if the current directory is `/home/pike', the prompt
`%8<..<%/' will expand to `..e/pike'. In this string, the ter‐
minating character (`<', `>' or `]'), or in fact any character,
may be quoted by a preceding `\'; note when using print -P, how‐
ever, that this must be doubled as the string is also subject to
standard print processing, in addition to any backslashes
removed by a double quoted string: the worst case is therefore
`print -P "%<\\\\<<..."'.
If the string is longer than the specified truncation length, it
will appear in full, completely replacing the truncated string.
The part of the prompt string to be truncated runs to the end of
the string, or to the end of the next enclosing group of the
`%(' construct, or to the next truncation encountered at the
same grouping level (i.e. truncations inside a `%(' are sepa‐
rate), which ever comes first. In particular, a truncation with
argument zero (e.g. `%<<') marks the end of the range of the
string to be truncated while turning off truncation from there
on. For example, the prompt '%10<...<%~%<<%# ' will print a
truncated representation of the current directory, followed by a
`%' or `#', followed by a space. Without the `%<<', those two
characters would be included in the string to be truncated.
%c
%.
%C Trailing component of $PWD. An integer may follow the `%' to
get more than one component. Unless `%C' is used, tilde con‐
traction is performed first. These are deprecated as %c and %C
are equivalent to %1~ and %1/, respectively, while explicit pos‐
itive integers have the same effect as for the latter two
sequences.
ZSHEXPN(1)ZSHEXPN(1)NAME
zshexpn - zsh expansion and substitution
DESCRIPTION
The following types of expansions are performed in the indicated order
in five steps:
History Expansion
This is performed only in interactive shells.
Alias Expansion
Aliases are expanded immediately before the command line is
parsed as explained under Aliasing in zshmisc(1).
Process Substitution
Parameter Expansion
Command Substitution
Arithmetic Expansion
Brace Expansion
These five are performed in one step in left-to-right fashion.
After these expansions, all unquoted occurrences of the charac‐
ters `\', `'' and `"' are removed.
Filename Expansion
If the SH_FILE_EXPANSION option is set, the order of expansion
is modified for compatibility with sh and ksh. In that case
filename expansion is performed immediately after alias expan‐
sion, preceding the set of five expansions mentioned above.
Filename Generation
This expansion, commonly referred to as globbing, is always done
last.
The following sections explain the types of expansion in detail.
HISTORY EXPANSION
History expansion allows you to use words from previous command lines
in the command line you are typing. This simplifies spelling correc‐
tions and the repetition of complicated commands or arguments. Immedi‐
ately before execution, each command is saved in the history list, the
size of which is controlled by the HISTSIZE parameter. The one most
recent command is always retained in any case. Each saved command in
the history list is called a history event and is assigned a number,
beginning with 1 (one) when the shell starts up. The history number
that you may see in your prompt (see Prompt Expansion in zshmisc(1)) is
the number that is to be assigned to the next command.
Overview
A history expansion begins with the first character of the histchars
parameter, which is `!' by default, and may occur anywhere on the com‐
mand line; history expansions do not nest. The `!' can be escaped with
`\' or can be enclosed between a pair of single quotes ('') to suppress
its special meaning. Double quotes will not work for this. Following
this history character is an optional event designator (see the section
`Event Designators') and then an optional word designator (the section
`Word Designators'); if neither of these designators is present, no
history expansion occurs.
Input lines containing history expansions are echoed after being
expanded, but before any other expansions take place and before the
command is executed. It is this expanded form that is recorded as the
history event for later references.
By default, a history reference with no event designator refers to the
same event as any preceding history reference on that command line; if
it is the only history reference in a command, it refers to the previ‐
ous command. However, if the option CSH_JUNKIE_HISTORY is set, then
every history reference with no event specification always refers to
the previous command.
For example, `!' is the event designator for the previous command, so
`!!:1' always refers to the first word of the previous command, and
`!!$' always refers to the last word of the previous command. With
CSH_JUNKIE_HISTORY set, then `!:1' and `!$' function in the same manner
as `!!:1' and `!!$', respectively. Conversely, if CSH_JUNKIE_HISTORY
is unset, then `!:1' and `!$' refer to the first and last words,
respectively, of the same event referenced by the nearest other history
reference preceding them on the current command line, or to the previ‐
ous command if there is no preceding reference.
The character sequence `^foo^bar' (where `^' is actually the second
character of the histchars parameter) repeats the last command, replac‐
ing the string foo with bar. More precisely, the sequence `^foo^bar^'
is synonymous with `!!:s^foo^bar^', hence other modifiers (see the sec‐
tion `Modifiers') may follow the final `^'.
If the shell encounters the character sequence `!"' in the input, the
history mechanism is temporarily disabled until the current list (see
zshmisc(1)) is fully parsed. The `!"' is removed from the input, and
any subsequent `!' characters have no special significance.
A less convenient but more comprehensible form of command history sup‐
port is provided by the fc builtin.
Event Designators
An event designator is a reference to a command-line entry in the his‐
tory list. In the list below, remember that the initial `!' in each
item may be changed to another character by setting the histchars
parameter.
! Start a history expansion, except when followed by a blank, new‐
line, `=' or `('. If followed immediately by a word designator
(see the section `Word Designators'), this forms a history ref‐
erence with no event designator (see the section `Overview').
!! Refer to the previous command. By itself, this expansion
repeats the previous command.
!n Refer to command-line n.
!-n Refer to the current command-line minus n.
!str Refer to the most recent command starting with str.
!?str[?]
Refer to the most recent command containing str. The trailing
`?' is necessary if this reference is to be followed by a modi‐
fier or followed by any text that is not to be considered part
of str.
!# Refer to the current command line typed in so far. The line is
treated as if it were complete up to and including the word
before the one with the `!#' reference.
!{...} Insulate a history reference from adjacent characters (if neces‐
sary).
Word Designators
A word designator indicates which word or words of a given command line
are to be included in a history reference. A `:' usually separates the
event specification from the word designator. It may be omitted only
if the word designator begins with a `^', `$', `*', `-' or `%'. Word
designators include:
0 The first input word (command).
n The nth argument.
^ The first argument. That is, 1.
$ The last argument.
% The word matched by (the most recent) ?str search.
x-y A range of words; x defaults to 0.
* All the arguments, or a null value if there are none.
x* Abbreviates `x-$'.
x- Like `x*' but omitting word $.
Note that a `%' word designator works only when used in one of `!%',
`!:%' or `!?str?:%', and only when used after a !? expansion (possibly
in an earlier command). Anything else results in an error, although
the error may not be the most obvious one.
Modifiers
After the optional word designator, you can add a sequence of one or
more of the following modifiers, each preceded by a `:'. These modi‐
fiers also work on the result of filename generation and parameter
expansion, except where noted.
h Remove a trailing pathname component, leaving the head. This
works like `dirname'.
r Remove a filename extension of the form `.xxx', leaving the root
name.
e Remove all but the extension.
t Remove all leading pathname components, leaving the tail. This
works like `basename'.
p Print the new command but do not execute it. Only works with
history expansion.
q Quote the substituted words, escaping further substitutions.
Works with history expansion and parameter expansion, though for
parameters it is only useful if the resulting text is to be
re-evaluated such as by eval.
Q Remove one level of quotes from the substituted words.
x Like q, but break into words at whitespace. Does not work with
parameter expansion.
l Convert the words to all lowercase.
u Convert the words to all uppercase.
s/l/r[/]
Substitute r for l as described below. Unless preceded immedi‐
ately by a g, with no colon between, the substitution is done
only for the first string that matches l. For arrays and for
filename generation, this applies to each word of the expanded
text.
& Repeat the previous s substitution. Like s, may be preceded
immediately by a g. In parameter expansion the & must appear
inside braces, and in filename generation it must be quoted with
a backslash.
The s/l/r/ substitution works as follows. The left-hand side of sub‐
stitutions are not regular expressions, but character strings. Any
character can be used as the delimiter in place of `/'. A backslash
quotes the delimiter character. The character `&', in the
right-hand-side r, is replaced by the text from the left-hand-side l.
The `&' can be quoted with a backslash. A null l uses the previous
string either from the previous l or from the contextual scan string s
from `!?s'. You can omit the rightmost delimiter if a newline immedi‐
ately follows r; the rightmost `?' in a context scan can similarly be
omitted. Note the same record of the last l and r is maintained across
all forms of expansion.
The following f, F, w and W modifiers work only with parameter expan‐
sion and filename generation. They are listed here to provide a single
point of reference for all modifiers.
f Repeats the immediately (without a colon) following modifier
until the resulting word doesn't change any more.
F:expr:
Like f, but repeats only n times if the expression expr evalu‐
ates to n. Any character can be used instead of the `:'; if
`(', `[', or `{' is used as the opening delimiter, the closing
delimiter should be ')', `]', or `}', respectively.
w Makes the immediately following modifier work on each word in
the string.
W:sep: Like w but words are considered to be the parts of the string
that are separated by sep. Any character can be used instead of
the `:'; opening parentheses are handled specially, see above.
PROCESS SUBSTITUTION
Each command argument of the form `<(list)', `>(list)' or `=(list)' is
subject to process substitution. In the case of the < or > forms, the
shell runs process list asynchronously. If the system supports the
/dev/fd mechanism, the command argument is the name of the device file
corresponding to a file descriptor; otherwise, if the system supports
named pipes (FIFOs), the command argument will be a named pipe. If the
form with > is selected then writing on this special file will provide
input for list. If < is used, then the file passed as an argument will
be connected to the output of the list process. For example,
paste <(cut -f1 file1) <(cut -f3 file2) |
tee >(process1) >(process2) >/dev/null
cuts fields 1 and 3 from the files file1 and file2 respectively, pastes
the results together, and sends it to the processes process1 and
process2.
Both the /dev/fd and the named pipe implementation have drawbacks. In
the former case, some programmes may automatically close the file
descriptor in question before examining the file on the command line,
particularly if this is necessary for security reasons such as when the
programme is running setuid. In the second case, if the programme does
not actually open the file, the subshell attempting to read from or
write to the pipe will (in a typical implementation, different operat‐
ing systems may have different behaviour) block for ever and have to be
killed explicitly. In both cases, the shell actually supplies the
information using a pipe, so that programmes that expect to lseek (see
lseek(2)) on the file will not work.
Also note that the previous example can be more compactly and effi‐
ciently written (provided the MULTIOS option is set) as:
paste <(cut -f1 file1) <(cut -f3 file2) \
> >(process1) > >(process2)
The shell uses pipes instead of FIFOs to implement the latter two
process substitutions in the above example.
If = is used, then the file passed as an argument will be the name of a
temporary file containing the output of the list process. This may be
used instead of the < form for a program that expects to lseek (see
lseek(2)) on the input file.
PARAMETER EXPANSION
The character `$' is used to introduce parameter expansions. See zsh‐
param(1) for a description of parameters, including arrays, associative
arrays, and subscript notation to access individual array elements.
In the expansions discussed below that require a pattern, the form of
the pattern is the same as that used for filename generation; see the
section `Filename Generation'. Note that these patterns, along with
the replacement text of any substitutions, are themselves subject to
parameter expansion, command substitution, and arithmetic expansion.
In addition to the following operations, the colon modifiers described
in the section `Modifiers' in the section `History Expansion' can be
applied: for example, ${i:s/foo/bar/} performs string substitution on
the expansion of parameter $i.
${name}
The value, if any, of the parameter name is substituted. The
braces are required if the expansion is to be followed by a let‐
ter, digit, or underscore that is not to be interpreted as part
of name. In addition, more complicated forms of substitution
usually require the braces to be present; exceptions, which only
apply if the option KSH_ARRAYS is not set, are a single sub‐
script or any colon modifiers appearing after the name, or any
of the characters `^', `=', `~', `#' or `+' appearing before the
name, all of which work with or without braces.
If name is an array parameter, and the KSH_ARRAYS option is not
set, then the value of each element of name is substituted, one
element per word. Otherwise, the expansion results in one word
only; with KSH_ARRAYS, this is the first element of an array.
No field splitting is done on the result unless the
SH_WORD_SPLIT option is set.
${+name}
If name is the name of a set parameter `1' is substituted, oth‐
erwise `0' is substituted.
${name:-word}
If name is set and is non-null then substitute its value; other‐
wise substitute word. If name is missing, substitute word.
${name:=word}
${name::=word}
In the first form, if name is unset or is null then set it to
word; in the second form, unconditionally set name to word. In
both forms, the value of the parameter is then substituted.
${name:?word}
If name is set and is non-null then substitute its value; other‐
wise, print word and exit from the shell. Interactive shells
instead return to the prompt. If word is omitted, then a stan‐
dard message is printed.
${name:+word}
If name is set and is non-null then substitute word; otherwise
substitute nothing.
If the colon is omitted from one of the above expressions containing a
colon, then the shell only checks whether name is set, not whether its
value is null.
In the following expressions, when name is an array and the substitu‐
tion is not quoted, or if the `(@)' flag or the name[@] syntax is used,
matching and replacement is performed on each array element separately.
${name#pattern}
${name##pattern}
If the pattern matches the beginning of the value of name, then
substitute the value of name with the matched portion deleted;
otherwise, just substitute the value of name. In the first
form, the smallest matching pattern is preferred; in the second
form, the largest matching pattern is preferred.
${name%pattern}
${name%%pattern}
If the pattern matches the end of the value of name, then sub‐
stitute the value of name with the matched portion deleted; oth‐
erwise, just substitute the value of name. In the first form,
the smallest matching pattern is preferred; in the second form,
the largest matching pattern is preferred.
${name:#pattern}
If the pattern matches the value of name, then substitute the
empty string; otherwise, just substitute the value of name. If
name is an array the matching array elements are removed (use
the `(M)' flag to remove the non-matched elements).
${name/pattern/repl}
${name//pattern/repl}
Replace the longest possible match of pattern in the expansion
of parameter name by string repl. The first form replaces just
the first occurrence, the second form all occurrences. Both
pattern and repl are subject to double-quoted substitution, so
that expressions like ${name/$opat/$npat} will work, but note
the usual rule that pattern characters in $opat are not treated
specially unless either the option GLOB_SUBST is set, or $opat
is instead substituted as ${~opat}.
The pattern may begin with a `#', in which case the pattern must
match at the start of the string, or `%', in which case it must
match at the end of the string. The repl may be an empty
string, in which case the final `/' may also be omitted. To
quote the final `/' in other cases it should be preceded by two
backslashes (i.e., a quoted backslash); this is not necessary if
the `/' occurs inside a substituted parameter. Note also that
the `#' and `%' are not active if they occur inside a substi‐
tuted parameter, even at the start.
The first `/' may be preceded by a `:', in which case the match
will only succeed if it matches the entire word. Note also the
effect of the I and S parameter expansion flags below; however,
the flags M, R, B, E and N are not useful.
For example,
foo="twinkle twinkle little star" sub="t*e" rep="spy"
print ${foo//${~sub}/$rep}
print ${(S)foo//${~sub}/$rep}
Here, the `~' ensures that the text of $sub is treated as a pat‐
tern rather than a plain string. In the first case, the longest
match for t*e is substituted and the result is `spy star', while
in the second case, the shortest matches are taken and the
result is `spy spy lispy star'.
${#spec}
If spec is one of the above substitutions, substitute the length
in characters of the result instead of the result itself. If
spec is an array expression, substitute the number of elements
of the result. Note that `^', `=', and `~', below, must appear
to the left of `#' when these forms are combined.
${^spec}
Turn on the RC_EXPAND_PARAM option for the evaluation of spec;
if the `^' is doubled, turn it off. When this option is set,
array expansions of the form foo${xx}bar, where the parameter xx
is set to (a b c), are substituted with `fooabar foobbar
foocbar' instead of the default `fooa b cbar'.
Internally, each such expansion is converted into the equivalent
list for brace expansion. E.g., ${^var} becomes
{$var[1],$var[2],...}, and is processed as described in the sec‐
tion `Brace Expansion' below. If word splitting is also in
effect the $var[N] may themselves be split into different list
elements.
${=spec}
Perform word splitting using the rules for SH_WORD_SPLIT during
the evaluation of spec, but regardless of whether the parameter
appears in double quotes; if the `=' is doubled, turn it off.
This forces parameter expansions to be split into separate words
before substitution, using IFS as a delimiter. This is done by
default in most other shells.
Note that splitting is applied to word in the assignment forms
of spec before the assignment to name is performed. This
affects the result of array assignments with the A flag.
${~spec}
Turn on the GLOB_SUBST option for the evaluation of spec; if the
`~' is doubled, turn it off. When this option is set, the
string resulting from the expansion will be interpreted as a
pattern anywhere that is possible, such as in filename expansion
and filename generation and pattern-matching contexts like the
right hand side of the `=' and `!=' operators in conditions.
If a ${...} type parameter expression or a $(...) type command substi‐
tution is used in place of name above, it is expanded first and the
result is used as if it were the value of name. Thus it is possible to
perform nested operations: ${${foo#head}%tail} substitutes the value
of $foo with both `head' and `tail' deleted. The form with $(...) is
often useful in combination with the flags described next; see the
examples below. Each name or nested ${...} in a parameter expansion
may also be followed by a subscript expression as described in Array
Parameters in zshparam(1).
Note that double quotes may appear around nested expressions, in which
case only the part inside is treated as quoted; for example,
${(f)"$(foo)"} quotes the result of $(foo), but the flag `(f)' (see
below) is applied using the rules for unquoted expansions. Note fur‐
ther that quotes are themselves nested in this context; for example, in
"${(@f)"$(foo)"}", there are two sets of quotes, one surrounding the
whole expression, the other (redundant) surrounding the $(foo) as
before.
Parameter Expansion Flags
If the opening brace is directly followed by an opening parenthesis,
the string up to the matching closing parenthesis will be taken as a
list of flags. In cases where repeating a flag is meaningful, the rep‐
etitions need not be consecutive; for example, `(q%q%q)' means the same
thing as the more readable `(%%qqq)'. The following flags are sup‐
ported:
% Expand all % escapes in the resulting words in the same way as
in in prompts (see the section `Prompt Expansion'). If this flag
is given twice, full prompt expansion is done on the resulting
words, depending on the setting of the PROMPT_PERCENT,
PROMPT_SUBST and PROMPT_BANG options.
@ In double quotes, array elements are put into separate words.
E.g., `"${(@)foo}"' is equivalent to `"${foo[@]}"' and
`"${(@)foo[1,2]}"' is the same as `"$foo[1]" "$foo[2]"'. This
is distinct from field splitting by the the f, s or z flags,
which still applies within each array element.
A Create an array parameter with `${...=...}', `${...:=...}' or
`${...::=...}'. If this flag is repeated (as in `AA'), create
an associative array parameter. Assignment is made before sort‐
ing or padding. The name part may be a subscripted range for
ordinary arrays; the word part must be converted to an array,
for example by using `${(AA)=name=...}' to activate field split‐
ting, when creating an associative array.
c With ${#name}, count the total number of characters in an array,
as if the elements were concatenated with spaces between them.
C Capitalize the resulting words. `Words' in this case refers to
sequences of alphanumeric characters separated by non-alphanu‐
merics, not to words that result from field splitting.
e Perform parameter expansion, command substitution and arithmetic
expansion on the result. Such expansions can be nested but too
deep recursion may have unpredictable effects.
f Split the result of the expansion to lines. This is a shorthand
for `ps:\n:'.
F Join the words of arrays together using newline as a separator.
This is a shorthand for `pj:\n:'.
i With o or O, sort case-independently.
k If name refers to an associative array, substitute the keys
(element names) rather than the values of the elements. Used
with subscripts (including ordinary arrays), force indices or
keys to be substituted even if the subscript form refers to val‐
ues. However, this flag may not be combined with subscript
ranges.
L Convert all letters in the result to lower case.
o Sort the resulting words in ascending order.
O Sort the resulting words in descending order.
P This forces the value of the parameter name to be interpreted as
a further parameter name, whose value will be used where appro‐
priate. If used with a nested parameter or command substitution,
the result of that will be taken as a parameter name in the same
way. For example, if you have `foo=bar' and `bar=baz', the
strings ${(P)foo}, ${(P)${foo}}, and ${(P)$(echo bar)} will be
expanded to `baz'.
q Quote the resulting words with backslashes. If this flag is
given twice, the resulting words are quoted in single quotes and
if it is given three times, the words are quoted in double
quotes. If it is given four times, the words are quoted in sin‐
gle quotes preceded by a $.
Q Remove one level of quotes from the resulting words.
t Use a string describing the type of the parameter where the
value of the parameter would usually appear. This string con‐
sists of keywords separated by hyphens (`-'). The first keyword
in the string describes the main type, it can be one of
`scalar', `array', `integer', `float' or `association'. The
other keywords describe the type in more detail:
local for local parameters
left for left justified parameters
right_blanks
for right justified parameters with leading blanks
right_zeros
for right justified parameters with leading zeros
lower for parameters whose value is converted to all lower case
when it is expanded
upper for parameters whose value is converted to all upper case
when it is expanded
readonly
for readonly parameters
tag for tagged parameters
export for exported parameters
unique for arrays which keep only the first occurrence of dupli‐
cated values
hide for parameters with the `hide' flag
special
for special parameters defined by the shell
U Convert all letters in the result to upper case.
v Used with k, substitute (as two consecutive words) both the key
and the value of each associative array element. Used with sub‐
scripts, force values to be substituted even if the subscript
form refers to indices or keys.
V Make any special characters in the resulting words visible.
w With ${#name}, count words in arrays or strings; the s flag may
be used to set a word delimiter.
W Similar to w with the difference that empty words between
repeated delimiters are also counted.
X With this flag parsing errors occurring with the Q and e flags
or the pattern matching forms such as `${name#pattern}' are
reported. Without the flag they are silently ignored.
z Split the result of the expansion into words using shell parsing
to find the words, i.e. taking into account any quoting in the
value.
Note that this is done very late, as for the `(s)' flag. So to
access single words in the result, one has to use nested expan‐
sions as in `${${(z)foo}[2]}'. Likewise, to remove the quotes in
the resulting words one would do: `${(Q)${(z)foo}}'.
The following flags (except p) are followed by one or more arguments as
shown. Any character, or the matching pairs `(...)', `{...}', `[...]',
or `<...>', may be used in place of a colon as delimiters, but note
that when a flag takes more than one argument, a matched pair of delim‐
iters must surround each argument.
p Recognize the same escape sequences as the print builtin in
string arguments to any of the flags described below.
j:string:
Join the words of arrays together using string as a separator.
Note that this occurs before field splitting by the
SH_WORD_SPLIT option.
l:expr::string1::string2:
Pad the resulting words on the left. Each word will be trun‐
cated if required and placed in a field expr characters wide.
The space to the left will be filled with string1 (concatenated
as often as needed) or spaces if string1 is not given. If both
string1 and string2 are given, this string is inserted once
directly to the left of each word, before padding.
r:expr::string1::string2:
As l, but pad the words on the right and insert string2 on the
right.
s:string:
Force field splitting (see the option SH_WORD_SPLIT) at the sep‐
arator string. Note that a string of two or more characters
means all must all match in sequence; this differs from the
treatment of two or more characters in the IFS parameter.
The following flags are meaningful with the ${...#...} or ${...%...}
forms. The S and I flags may also be used with the ${.../...} forms.
S Search substrings as well as beginnings or ends; with # start
from the beginning and with % start from the end of the string.
With substitution via ${.../...} or ${...//...}, specifies
non-greedy matching, i.e. that the shortest instead of the long‐
est match should be replaced.
I:expr:
Search the exprth match (where expr evaluates to a number).
This only applies when searching for substrings, either with the
S flag, or with ${.../...} (only the exprth match is substi‐
tuted) or ${...//...} (all matches from the exprth on are sub‐
stituted). The default is to take the first match.
The exprth match is counted such that there is either one or
zero matches from each starting position in the string, although
for global substitution matches overlapping previous replace‐
ments are ignored. With the ${...%...} and ${...%%...} forms,
the starting position for the match moves backwards from the end
as the index increases, while with the other forms it moves for‐
ward from the start.
Hence with the string
which switch is the right switch for Ipswich?
substitutions of the form ${(SI:N:)string#w*ch} as N increases
from 1 will match and remove `which', `witch', `witch' and
`wich'; the form using `##' will match and remove `which switch
is the right switch for Ipswich', `witch is the right switch for
Ipswich', `witch for Ipswich' and `wich'. The form using `%'
will remove the same matches as for `#', but in reverse order,
and the form using `%%' will remove the same matches as for `##'
in reverse order.
B Include the index of the beginning of the match in the result.
E Include the index of the end of the match in the result.
M Include the matched portion in the result.
N Include the length of the match in the result.
R Include the unmatched portion in the result (the Rest).
Rules
Here is a summary of the rules for substitution; this assumes that
braces are present around the substitution, i.e. ${...}. Some particu‐
lar examples are given below. Note that the Zsh Development Group
accepts no responsibility for any brain damage which may occur during
the reading of the following rules.
1. Nested Substitution
If multiple nested ${...} forms are present, substitution is
performed from the inside outwards. At each level, the substi‐
tution takes account of whether the current value is a scalar or
an array, whether the whole substitution is in double quotes,
and what flags are supplied to the current level of substitu‐
tion, just as if the nested substitution were the outermost.
The flags are not propagated up to enclosing substitutions; the
nested substitution will return either a scalar or an array as
determined by the flags, possibly adjusted for quoting. All the
following steps take place where applicable at all levels of
substitution. Note that, unless the `(P)' flag is present, the
flags and any subscripts apply directly to the value of the
nested substitution; for example, the expansion ${${foo}}
behaves exactly the same as ${foo}.
2. Parameter Subscripting
If the value is a raw parameter reference with a subscript, such
as ${var[3]}, the effect of subscripting is applied directly to
the parameter. Subscripts are evaluated left to right; subse‐
quent subscripts apply to the scalar or array value yielded by
the previous subscript. Thus if var is an array, ${var[1][2]}
is the second character of the first word, but ${var[2,4][2]} is
the entire third word (the second word of the range of words two
through four of the original array). Any number of subscripts
may appear.
3. Parameter Name Replacement
The effect of any (P) flag, which treats the value so far as a
parameter name and replaces it with the corresponding value, is
applied.
4. Double-Quoted Joining
If the value after this process is an array, and the substitu‐
tion appears in double quotes, and no (@) flag is present at the
current level, the words of the value are joined with the first
character of the parameter $IFS, by default a space, between
each word (single word arrays are not modified). If the (j)
flag is present, that is used for joining instead of $IFS.
5. Nested Subscripting
Any remaining subscripts (i.e. of a nested substitution) are
evaluated at this point, based on whether the value is an array
or a scalar. As with 2., multiple subscripts can appear. Note
that ${foo[2,4][2]} is thus equivalent to ${${foo[2,4]}[2]} and
also to "${${(@)foo[2,4]}[2]}" (the nested substitution returns
an array in both cases), but not to "${${foo[2,4]}[2]}" (the
nested substitution returns a scalar because of the quotes).
6. Modifiers
Any modifiers, as specified by a trailing `#', `%', `/' (possi‐
bly doubled) or by a set of modifiers of the form :... (see the
section `Modifiers' in the section `History Expansion'), are
applied to the words of the value at this level.
7. Forced Joining
If the `(j)' flag is present, or no `(j)' flag is present but
the string is to be split as given by rules 8. or 9., and join‐
ing did not take place at step 4., any words in the value are
joined together using the given string or the first character of
$IFS if none. Note that the `(F)' flag implicitly supplies a
string for joining in this manner.
8. Forced Splitting
If one of the `(s)', `(f)' or `(z)' flags are present, or the
`=' specifier was present (e.g. ${=var}), the word is split on
occurrences of the specified string, or (for = with neither of
the two flags present) any of the characters in $IFS.
9. Shell Word Splitting
If no `(s)', `(f)' or `=' was given, but the word is not quoted
and the option SH_WORD_SPLIT is set, the word is split on occur‐
rences of any of the characters in $IFS. Note this step, too,
takes place at all levels of a nested substitution.
10. Re-Evaluation
Any `(e)' flag is applied to the value, forcing it to be
re-examined for new parameter substitutions, but also for com‐
mand and arithmetic substitutions.
11. Padding
Any padding of the value by the `(l.fill.)' or `(r.fill.)' flags
is applied.
12. Semantic Joining
In contexts where expansion semantics requires a single word to
result, all words are rejoined with the first character of IFS
between. So in `${(P)${(f)lines}}' the value of ${lines} is
split at newlines, but then must be joined again before the P
flag can be applied.
If a single word is not required, this rule is skipped.
Examples
The flag f is useful to split a double-quoted substitution line by
line. For example, ${(f)"$(<file)"} substitutes the contents of file
divided so that each line is an element of the resulting array. Com‐
pare this with the effect of $(<file) alone, which divides the file up
by words, or the same inside double quotes, which makes the entire con‐
tent of the file a single string.
The following illustrates the rules for nested parameter expansions.
Suppose that $foo contains the array (bar baz):
"${(@)${foo}[1]}"
This produces the result b. First, the inner substitution
"${foo}", which has no array (@) flag, produces a single word
result "bar baz". The outer substitution "${(@)...[1]}" detects
that this is a scalar, so that (despite the `(@)' flag) the sub‐
script picks the first character.
"${${(@)foo}[1]}"
This produces the result `bar'. In this case, the inner substi‐
tution "${(@)foo}" produces the array `(bar baz)'. The outer
substitution "${...[1]}" detects that this is an array and picks
the first word. This is similar to the simple case "${foo[1]}".
As an example of the rules for word splitting and joining, suppose $foo
contains the array `(ax1 bx1)'. Then
${(s/x/)foo}
produces the words `a', `1 b' and `1'.
${(j/x/s/x/)foo}
produces `a', `1', `b' and `1'.
${(s/x/)foo%%1*}
produces `a' and ` b' (note the extra space). As substitution
occurs before either joining or splitting, the operation first
generates the modified array (ax bx), which is joined to give
"ax bx", and then split to give `a', ` b' and `'. The final
empty string will then be elided, as it is not in double quotes.
COMMAND SUBSTITUTION
A command enclosed in parentheses preceded by a dollar sign, like
`$(...)', or quoted with grave accents, like ``...`', is replaced with
its standard output, with any trailing newlines deleted. If the sub‐
stitution is not enclosed in double quotes, the output is broken into
words using the IFS parameter. The substitution `$(cat foo)' may be
replaced by the equivalent but faster `$(<foo)'. In either case, if
the option GLOB_SUBST is set, the output is eligible for filename gen‐
eration.
ARITHMETIC EXPANSION
A string of the form `$[exp]' or `$((exp))' is substituted with the
value of the arithmetic expression exp. exp is subjected to parameter
expansion, command substitution and arithmetic expansion before it is
evaluated. See the section `Arithmetic Evaluation'.
BRACE EXPANSION
A string of the form `foo{xx,yy,zz}bar' is expanded to the individual
words `fooxxbar', `fooyybar' and `foozzbar'. Left-to-right order is
preserved. This construct may be nested. Commas may be quoted in
order to include them literally in a word.
An expression of the form `{n1..n2}', where n1 and n2 are integers, is
expanded to every number between n1 and n2 inclusive. If either number
begins with a zero, all the resulting numbers will be padded with lead‐
ing zeroes to that minimum width. If the numbers are in decreasing
order the resulting sequence will also be in decreasing order.
If a brace expression matches none of the above forms, it is left
unchanged, unless the BRACE_CCL option is set. In that case, it is
expanded to a sorted list of the individual characters between the
braces, in the manner of a search set. `-' is treated specially as in
a search set, but `^' or `!' as the first character is treated nor‐
mally.
Note that brace expansion is not part of filename generation (glob‐
bing); an expression such as */{foo,bar} is split into two separate
words */foo and */bar before filename generation takes place. In par‐
ticular, note that this is liable to produce a `no match' error if
either of the two expressions does not match; this is to be contrasted
with */(foo|bar), which is treated as a single pattern but otherwise
has similar effects.
FILENAME EXPANSION
Each word is checked to see if it begins with an unquoted `~'. If it
does, then the word up to a `/', or the end of the word if there is no
`/', is checked to see if it can be substituted in one of the ways
described here. If so, then the `~' and the checked portion are
replaced with the appropriate substitute value.
A `~' by itself is replaced by the value of $HOME. A `~' followed by a
`+' or a `-' is replaced by the value of $PWD or $OLDPWD, respectively.
A `~' followed by a number is replaced by the directory at that posi‐
tion in the directory stack. `~0' is equivalent to `~+', and `~1' is
the top of the stack. `~+' followed by a number is replaced by the
directory at that position in the directory stack. `~+0' is equivalent
to `~+', and `~+1' is the top of the stack. `~-' followed by a number
is replaced by the directory that many positions from the bottom of the
stack. `~-0' is the bottom of the stack. The PUSHD_MINUS option
exchanges the effects of `~+' and `~-' where they are followed by a
number.
A `~' followed by anything not already covered is looked up as a named
directory, and replaced by the value of that named directory if found.
Named directories are typically home directories for users on the sys‐
tem. They may also be defined if the text after the `~' is the name of
a string shell parameter whose value begins with a `/'. It is also
possible to define directory names using the -d option to the hash
builtin.
In certain circumstances (in prompts, for instance), when the shell
prints a path, the path is checked to see if it has a named directory
as its prefix. If so, then the prefix portion is replaced with a `~'
followed by the name of the directory. The shortest way of referring
to the directory is used, with ties broken in favour of using a named
directory, except when the directory is / itself. The parameters $PWD
and $OLDPWD are never abbreviated in this fashion.
If a word begins with an unquoted `=' and the EQUALS option is set, the
remainder of the word is taken as the name of a command or alias. If a
command exists by that name, the word is replaced by the full pathname
of the command. If an alias exists by that name, the word is replaced
with the text of the alias.
Filename expansion is performed on the right hand side of a parameter
assignment, including those appearing after commands of the typeset
family. In this case, the right hand side will be treated as a
colon-separated list in the manner of the PATH parameter, so that a `~'
or an `=' following a `:' is eligible for expansion. All such behav‐
iour can be disabled by quoting the `~', the `=', or the whole expres‐
sion (but not simply the colon); the EQUALS option is also respected.
If the option MAGIC_EQUAL_SUBST is set, any unquoted shell argument in
the form `identifier=expression' becomes eligible for file expansion as
described in the previous paragraph. Quoting the first `=' also
inhibits this.
FILENAME GENERATION
If a word contains an unquoted instance of one of the characters `*',
`(', `|', `<', `[', or `?', it is regarded as a pattern for filename
generation, unless the GLOB option is unset. If the EXTENDED_GLOB
option is set, the `^' and `#' characters also denote a pattern; other‐
wise they are not treated specially by the shell.
The word is replaced with a list of sorted filenames that match the
pattern. If no matching pattern is found, the shell gives an error
message, unless the NULL_GLOB option is set, in which case the word is
deleted; or unless the NOMATCH option is unset, in which case the word
is left unchanged.
In filename generation, the character `/' must be matched explicitly;
also, a `.' must be matched explicitly at the beginning of a pattern or
after a `/', unless the GLOB_DOTS option is set. No filename genera‐
tion pattern matches the files `.' or `..'. In other instances of pat‐
tern matching, the `/' and `.' are not treated specially.
Glob Operators
* Matches any string, including the null string.
? Matches any character.
[...] Matches any of the enclosed characters. Ranges of characters
can be specified by separating two characters by a `-'. A `-'
or `]' may be matched by including it as the first character in
the list. There are also several named classes of characters,
in the form `[:name:]' with the following meanings: `[:alnum:]'
alphanumeric, `[:alpha:]' alphabetic, `[:blank:]' space or tab,
`[:cntrl:]' control character, `[:digit:]' decimal digit,
`[:graph:]' printable character except whitespace, `[:lower:]'
lowercase letter, `[:print:]' printable character, `[:punct:]'
printable character neither alphanumeric nor whitespace,
`[:space:]' whitespace character, `[:upper:]' uppercase letter,
`[:xdigit:]' hexadecimal digit. These use the macros provided
by the operating system to test for the given character combina‐
tions, including any modifications due to local language set‐
tings: see ctype(3). Note that the square brackets are addi‐
tional to those enclosing the whole set of characters, so to
test for a single alphanumeric character you need `[[:alnum:]]'.
Named character sets can be used alongside other types, e.g.
`[[:alpha:]0-9]'.
[^...]
[!...] Like [...], except that it matches any character which is not in
the given set.
<[x]-[y]>
Matches any number in the range x to y, inclusive. Either of
the numbers may be omitted to make the range open-ended; hence
`<->' matches any number. To match individual digits, the [...]
form is more efficient.
Be careful when using other wildcards adjacent to patterns of
this form; for example, <0-9>* will actually match any number
whatsoever at the start of the string, since the `<0-9>' will
match the first digit, and the `*' will match any others. This
is a trap for the unwary, but is in fact an inevitable conse‐
quence of the rule that the longest possible match always suc‐
ceeds. Expressions such as `<0-9>[^[:digit:]]*' can be used
instead.
(...) Matches the enclosed pattern. This is used for grouping. If
the KSH_GLOB option is set, then a `@', `*', `+', `?' or `!'
immediately preceding the `(' is treated specially, as detailed
below. The option SH_GLOB prevents bare parentheses from being
used in this way, though the KSH_GLOB option is still available.
Note that grouping cannot extend over multiple directories: it
is an error to have a `/' within a group (this only applies for
patterns used in filename generation). There is one exception:
a group of the form (pat/)# appearing as a complete path segment
can match a sequence of directories. For example, foo/(a*/)#bar
matches foo/bar, foo/any/bar, foo/any/anyother/bar, and so on.
x|y Matches either x or y. This operator has lower precedence than
any other. The `|' character must be within parentheses, to
avoid interpretation as a pipeline.
^x (Requires EXTENDED_GLOB to be set.) Matches anything except the
pattern x. This has a higher precedence than `/', so `^foo/bar'
will search directories in `.' except `./foo' for a file named
`bar'.
x~y (Requires EXTENDED_GLOB to be set.) Match anything that matches
the pattern x but does not match y. This has lower precedence
than any operator except `|', so `*/*~foo/bar' will search for
all files in all directories in `.' and then exclude `foo/bar'
if there was such a match. Multiple patterns can be excluded by
`foo~bar~baz'. In the exclusion pattern (y), `/' and `.' are
not treated specially the way they usually are in globbing.
x# (Requires EXTENDED_GLOB to be set.) Matches zero or more occur‐
rences of the pattern x. This operator has high precedence;
`12#' is equivalent to `1(2#)', rather than `(12)#'. It is an
error for an unquoted `#' to follow something which cannot be
repeated; this includes an empty string, a pattern already fol‐
lowed by `##', or parentheses when part of a KSH_GLOB pattern
(for example, `!(foo)#' is invalid and must be replaced by
`*(!(foo))').
x## (Requires EXTENDED_GLOB to be set.) Matches one or more occur‐
rences of the pattern x. This operator has high precedence;
`12##' is equivalent to `1(2##)', rather than `(12)##'. No more
than two active `#' characters may appear together.
ksh-like Glob Operators
If the KSH_GLOB option is set, the effects of parentheses can be modi‐
fied by a preceding `@', `*', `+', `?' or `!'. This character need not
be unquoted to have special effects, but the `(' must be.
@(...) Match the pattern in the parentheses. (Like `(...)'.)
*(...) Match any number of occurrences. (Like `(...)#'.)
+(...) Match at least one occurrence. (Like `(...)##'.)
?(...) Match zero or one occurrence. (Like `(|...)'.)
!(...) Match anything but the expression in parentheses. (Like
`(^(...))'.)
Precedence
The precedence of the operators given above is (highest) `^', `/', `~',
`|' (lowest); the remaining operators are simply treated from left to
right as part of a string, with `#' and `##' applying to the shortest
possible preceding unit (i.e. a character, `?', `[...]', `<...>', or a
parenthesised expression). As mentioned above, a `/' used as a direc‐
tory separator may not appear inside parentheses, while a `|' must do
so; in patterns used in other contexts than filename generation (for
example, in case statements and tests within `[[...]]'), a `/' is not
special; and `/' is also not special after a `~' appearing outside
parentheses in a filename pattern.
Globbing Flags
There are various flags which affect any text to their right up to the
end of the enclosing group or to the end of the pattern; they require
the EXTENDED_GLOB option. All take the form (#X) where X may have one
of the following forms:
i Case insensitive: upper or lower case characters in the pattern
match upper or lower case characters.
l Lower case characters in the pattern match upper or lower case
characters; upper case characters in the pattern still only
match upper case characters.
I Case sensitive: locally negates the effect of i or l from that
point on.
b Activate backreferences for parenthesised groups in the pattern;
this does not work in filename generation. When a pattern with
a set of active parentheses is matched, the strings matched by
the groups are stored in the array $match, the indices of the
beginning of the matched parentheses in the array $mbegin, and
the indices of the end in the array $mend, with the first ele‐
ment of each array corresponding to the first parenthesised
group, and so on. These arrays are not otherwise special to the
shell. The indices use the same convention as does parameter
substitution, so that elements of $mend and $mbegin may be used
in subscripts; the KSH_ARRAYS option is respected. Sets of
globbing flags are not considered parenthesised groups; only the
first nine active parentheses can be referenced.
For example,
foo="a string with a message"
if [[ $foo = (a|an)' '(#b)(*)' '* ]]; then
print ${foo[$mbegin[1],$mend[1]]}
fi
prints `string with a'. Note that the first parenthesis is
before the (#b) and does not create a backreference.
Backreferences work with all forms of pattern matching other
than filename generation, but note that when performing matches
on an entire array, such as ${array#pattern}, or a global sub‐
stitution, such as ${param//pat/repl}, only the data for the
last match remains available. In the case of global replace‐
ments this may still be useful. See the example for the m flag
below.
The numbering of backreferences strictly follows the order of
the opening parentheses from left to right in the pattern
string, although sets of parentheses may be nested. There are
special rules for parentheses followed by `#' or `##'. Only the
last match of the parenthesis is remembered: for example, in `[[
abab = (#b)([ab])# ]]', only the final `b' is stored in
match[1]. Thus extra parentheses may be necessary to match the
complete segment: for example, use `X((ab|cd)#)Y' to match a
whole string of either `ab' or `cd' between `X' and `Y', using
the value of $match[1] rather than $match[2].
If the match fails none of the parameters is altered, so in some
cases it may be necessary to initialise them beforehand. If
some of the backreferences fail to match --- which happens if
they are in an alternate branch which fails to match, or if they
are followed by # and matched zero times --- then the matched
string is set to the empty string, and the start and end indices
are set to -1.
Pattern matching with backreferences is slightly slower than
without.
B Deactivate backreferences, negating the effect of the b flag
from that point on.
m Set references to the match data for the entire string matched;
this is similar to backreferencing and does not work in filename
generation. The flag must be in effect at the end of the pat‐
tern, i.e. not local to a group. The parameters $MATCH, $MBEGIN
and $MEND will be set to the string matched and to the indices
of the beginning and end of the string, respectively. This is
most useful in parameter substitutions, as otherwise the string
matched is obvious.
For example,
arr=(veldt jynx grimps waqf zho buck)
print ${arr//(#m)[aeiou]/${(U)MATCH}}
forces all the matches (i.e. all vowels) into uppercase, print‐
ing `vEldt jynx grImps wAqf zhO bUck'.
Unlike backreferences, there is no speed penalty for using match
references, other than the extra substitutions required for the
replacement strings in cases such as the example shown.
M Deactivate the m flag, hence no references to match data will be
created.
anum Approximate matching: num errors are allowed in the string
matched by the pattern. The rules for this are described in the
next subsection.
s, e Unlike the other flags, these have only a local effect, and each
must appear on its own: `(#s)' and `(#e)' are the only valid
forms. The `(#s)' flag succeeds only at the start of the test
string, and the `(#e)' flag succeeds only at the end of the test
string; they correspond to `^' and `$' in standard regular
expressions. They are useful for matching path segments in pat‐
terns other than those in filename generation (where path seg‐
ments are in any case treated separately). For example,
`*((#s)|/)test((#e)|/)*' matches a path segment `test' in any of
the following strings: test, test/at/start, at/end/test,
in/test/middle.
Another use is in parameter substitution; for example
`${array/(#s)A*Z(#e)}' will remove only elements of an array
which match the complete pattern `A*Z'. There are other ways of
performing many operations of this type, however the combination
of the substitution operations `/' and `//' with the `(#s)' and
`(#e)' flags provides a single simple and memorable method.
Note that assertions of the form `(^(#s))' also work, i.e. match
anywhere except at the start of the string, although this actu‐
ally means `anything except a zero-length portion at the start
of the string'; you need to use `(""~(#s))' to match a
zero-length portion of the string not at the start.
For example, the test string fooxx can be matched by the pattern
(#i)FOOXX, but not by (#l)FOOXX, (#i)FOO(#I)XX or ((#i)FOOX)X. The
string (#ia2)readme specifies case-insensitive matching of readme with
up to two errors.
When using the ksh syntax for grouping both KSH_GLOB and EXTENDED_GLOB
must be set and the left parenthesis should be preceded by @. Note
also that the flags do not affect letters inside [...] groups, in other
words (#i)[a-z] still matches only lowercase letters. Finally, note
that when examining whole paths case-insensitively every directory must
be searched for all files which match, so that a pattern of the form
(#i)/foo/bar/... is potentially slow.
Approximate Matching
When matching approximately, the shell keeps a count of the errors
found, which cannot exceed the number specified in the (#anum) flags.
Four types of error are recognised:
1. Different characters, as in fooxbar and fooybar.
2. Transposition of characters, as in banana and abnana.
3. A character missing in the target string, as with the pattern
road and target string rod.
4. An extra character appearing in the target string, as with stove
and strove.
Thus, the pattern (#a3)abcd matches dcba, with the errors occurring by
using the first rule twice and the second once, grouping the string as
[d][cb][a] and [a][bc][d].
Non-literal parts of the pattern must match exactly, including charac‐
ters in character ranges: hence (#a1)??? matches strings of length
four, by applying rule 4 to an empty part of the pattern, but not
strings of length two, since all the ? must match. Other characters
which must match exactly are initial dots in filenames (unless the
GLOB_DOTS option is set), and all slashes in filenames, so that a/bc is
two errors from ab/c (the slash cannot be transposed with another char‐
acter). Similarly, errors are counted separately for non-contiguous
strings in the pattern, so that (ab|cd)ef is two errors from aebf.
When using exclusion via the ~ operator, approximate matching is
treated entirely separately for the excluded part and must be activated
separately. Thus, (#a1)README~READ_ME matches READ.ME but not READ_ME,
as the trailing READ_ME is matched without approximation. However,
(#a1)README~(#a1)READ_ME does not match any pattern of the form READ?ME
as all such forms are now excluded.
Apart from exclusions, there is only one overall error count; however,
the maximum errors allowed may be altered locally, and this can be
delimited by grouping. For example, (#a1)cat((#a0)dog)fox allows one
error in total, which may not occur in the dog section, and the pattern
(#a1)cat(#a0)dog(#a1)fox is equivalent. Note that the point at which
an error is first found is the crucial one for establishing whether to
use approximation; for example, (#a1)abc(#a0)xyz will not match
abcdxyz, because the error occurs at the `x', where approximation is
turned off.
Entire path segments may be matched approximately, so that
`(#a1)/foo/d/is/available/at/the/bar' allows one error in any path seg‐
ment. This is much less efficient than without the (#a1), however,
since every directory in the path must be scanned for a possible
approximate match. It is best to place the (#a1) after any path seg‐
ments which are known to be correct.
Recursive Globbing
A pathname component of the form `(foo/)#' matches a path consisting of
zero or more directories matching the pattern foo.
As a shorthand, `**/' is equivalent to `(*/)#'; note that this there‐
fore matches files in the current directory as well as subdirectories.
Thus:
ls (*/)#bar
or
ls **/bar
does a recursive directory search for files named `bar' (potentially
including the file `bar' in the current directory). This form does not
follow symbolic links; the alternative form `***/' does, but is other‐
wise identical. Neither of these can be combined with other forms of
globbing within the same path segment; in that case, the `*' operators
revert to their usual effect.
Glob Qualifiers
Patterns used for filename generation may end in a list of qualifiers
enclosed in parentheses. The qualifiers specify which filenames that
otherwise match the given pattern will be inserted in the argument
list.
If the option BARE_GLOB_QUAL is set, then a trailing set of parentheses
containing no `|' or `(' characters (or `~' if it is special) is taken
as a set of glob qualifiers. A glob subexpression that would normally
be taken as glob qualifiers, for example `(^x)', can be forced to be
treated as part of the glob pattern by doubling the parentheses, in
this case producing `((^x))'.
A qualifier may be any one of the following:
/ directories
. plain files
@ symbolic links
= sockets
p named pipes (FIFOs)
* executable plain files (0100)
% device files (character or block special)
%b block special files
%c character special files
r owner-readable files (0400)
w owner-writable files (0200)
x owner-executable files (0100)
A group-readable files (0040)
I group-writable files (0020)
E group-executable files (0010)
R world-readable files (0004)
W world-writable files (0002)
X world-executable files (0001)
s setuid files (04000)
S setgid files (02000)
t files with the sticky bit (01000)
fspec files with access rights matching spec. This spec may be a octal
number optionally preceded by a `=', a `+', or a `-'. If none of
these characters is given, the behavior is the same as for `='.
The octal number describes the mode bits to be expected, if com‐
bined with a `=', the value given must match the file-modes
exactly, with a `+', at least the bits in the given number must
be set in the file-modes, and with a `-', the bits in the number
must not be set. Giving a `?' instead of a octal digit anywhere
in the number ensures that the corresponding bits in the
file-modes are not checked, this is only useful in combination
with `='.
If the qualifier `f' is followed by any other character anything
up to the next matching character (`[', `{', and `<' match `]',
`}', and `>' respectively, any other character matches itself)
is taken as a list of comma-separated sub-specs. Each sub-spec
may be either a octal number as described above or a list of any
of the characters `u', `g', `o', and `a', followed by a `=', a
`+', or a `-', followed by a list of any of the characters `r',
`w', `x', `s', and `t', or a octal digit. The first list of
characters specify which access rights are to be checked. If a
`u' is given, those for the owner of the file are used, if a `g'
is given, those of the group are checked, a `o' means to test
those of other users, and the `a' says to test all three groups.
The `=', `+', and `-' again says how the modes are to be checked
and have the same meaning as described for the first form above.
The second list of characters finally says which access rights
are to be expected: `r' for read access, `w' for write access,
`x' for the right to execute the file (or to search a direc‐
tory), `s' for the setuid and setgid bits, and `t' for the
sticky bit.
Thus, `*(f70?)' gives the files for which the owner has read,
write, and execute permission, and for which other group members
have no rights, independent of the permissions for other users.
The pattern `*(f-100)' gives all files for which the owner does
not have execute permission, and `*(f:gu+w,o-rx:)' gives the
files for which the owner and the other members of the group
have at least write permission, and for which other users don't
have read or execute permission.
estring
The string will be executed as shell code. The filename will be
included in the list if and only if the code returns a zero sta‐
tus (usually the status of the last command). The first charac‐
ter after the `e' will be used as a separator and anything up to
the next matching separator will be taken as the string; `[',
`{', and `<' match `]', `}', and `>', respectively, while any
other character matches itself. Note that expansions must be
quoted in the string to prevent them from being expanded before
globbing is done.
During the execution of string the filename currently being
tested is available in the parameter REPLY; the parameter may be
altered to a string to be inserted into the list instead of the
original filename. In addition, the parameter reply may be set
to an array or a string, which overrides the value of REPLY. If
set to an array, the latter is inserted into the command line
word by word.
For example, suppose a directory contains a single file
`lonely'. Then the expression `*(e:'reply=(${REPLY}{1,2})':)'
will cause the words `lonely1 lonely2' to be inserted into the
command line. Note the quotation marks.
ddev files on the device dev
l[-|+]ct
files having a link count less than ct (-), greater than ct (+),
or equal to ct
U files owned by the effective user ID
G files owned by the effective group ID
uid files owned by user ID id if it is a number, if not, than the
character after the `u' will be used as a separator and the
string between it and the next matching separator (`[', `{', and
`<' match `]', `}', and `>' respectively, any other character
matches itself) will be taken as a user name, and the user ID of
this user will be taken (e.g. `u:foo:' or `u[foo]' for user
`foo')
gid like uid but with group IDs or names
a[Mwhms][-|+]n
files accessed exactly n days ago. Files accessed within the
last n days are selected using a negative value for n (-n).
Files accessed more than n days ago are selected by a positive n
value (+n). Optional unit specifiers `M', `w', `h', `m' or `s'
(e.g. `ah5') cause the check to be performed with months (of 30
days), weeks, hours, minutes or seconds instead of days, respec‐
tively. For instance, `echo *(ah-5)' would echo files accessed
within the last five hours.
m[Mwhms][-|+]n
like the file access qualifier, except that it uses the file
modification time.
c[Mwhms][-|+]n
like the file access qualifier, except that it uses the file
inode change time.
L[+|-]n
files less than n bytes (-), more than n bytes (+), or exactly n
bytes in length. If this flag is directly followed by a `k'
(`K'), `m' (`M'), or `p' (`P') (e.g. `Lk-50') the check is per‐
formed with kilobytes, megabytes, or blocks (of 512 bytes)
instead.
^ negates all qualifiers following it
- toggles between making the qualifiers work on symbolic links
(the default) and the files they point to
M sets the MARK_DIRS option for the current pattern
T appends a trailing qualifier mark to the filenames, analogous to
the LIST_TYPES option, for the current pattern (overrides M)
N sets the NULL_GLOB option for the current pattern
D sets the GLOB_DOTS option for the current pattern
n sets the NUMERIC_GLOB_SORT option for the current pattern
oc specifies how the names of the files should be sorted. If c is n
they are sorted by name (the default); if it is L they are
sorted depending on the size (length) of the files; if l they
are sorted by the number of links; if a, m, or c they are sorted
by the time of the last access, modification, or inode change
respectively; if d, files in subdirectories appear before those
in the current directory at each level of the search --- this is
best combined with other criteria, for example `odon' to sort on
names for files within the same directory. Note that a, m, and
c compare the age against the current time, hence the first name
in the list is the youngest file. Also note that the modifiers ^
and - are used, so `*(^-oL)' gives a list of all files sorted by
file size in descending order, following any symbolic links.
Oc like `o', but sorts in descending order; i.e. `*(^oc)' is the
same as `*(Oc)' and `*(^Oc)' is the same as `*(oc)'; `Od' puts
files in the current directory before those in subdirectories at
each level of the search.
[beg[,end]]
specifies which of the matched filenames should be included in
the returned list. The syntax is the same as for array sub‐
scripts. beg and the optional end may be mathematical expres‐
sions. As in parameter subscripting they may be negative to make
them count from the last match backward. E.g.: `*(-OL[1,3])'
gives a list of the names of the three largest files.
More than one of these lists can be combined, separated by commas. The
whole list matches if at least one of the sublists matches (they are
`or'ed, the qualifiers in the sublists are `and'ed). Some qualifiers,
however, affect all matches generated, independent of the sublist in
which they are given. These are the qualifiers `M', `T', `N', `D',
`n', `o', `O' and the subscripts given in brackets (`[...]').
If a `:' appears in a qualifier list, the remainder of the expression
in parenthesis is interpreted as a modifier (see the section `Modi‐
fiers' in the section `History Expansion'). Note that each modifier
must be introduced by a separate `:'. Note also that the result after
modification does not have to be an existing file. The name of any
existing file can be followed by a modifier of the form `(:..)' even if
no actual filename generation is performed. Thus:
ls *(-/)
lists all directories and symbolic links that point to directories, and
ls *(%W)
lists all world-writable device files in the current directory, and
ls *(W,X)
lists all files in the current directory that are world-writable or
world-executable, and
echo /tmp/foo*(u0^@:t)
outputs the basename of all root-owned files beginning with the string
`foo' in /tmp, ignoring symlinks, and
ls *.*~(lex|parse).[ch](^D^l1)
lists all files having a link count of one whose names contain a dot
(but not those starting with a dot, since GLOB_DOTS is explicitly
switched off) except for lex.c, lex.h, parse.c and parse.h.
ZSHPARAM(1)ZSHPARAM(1)NAME
zshparam - zsh parameters
DESCRIPTION
A parameter has a name, a value, and a number of attributes. A name
may be any sequence of alphanumeric characters and underscores, or the
single characters `*', `@', `#', `?', `-', `$', or `!'. The value may
be a scalar (a string), an integer, an array (indexed numerically), or
an associative array (an unordered set of name-value pairs, indexed by
name). To declare the type of a parameter, or to assign a scalar or
integer value to a parameter, use the typeset builtin.
The value of a scalar or integer parameter may also be assigned by
writing:
name=value
If the integer attribute, -i, is set for name, the value is subject to
arithmetic evaluation. See the section `Array Parameters' for addi‐
tional forms of assignment.
To refer to the value of a parameter, write `$name' or `${name}'. See
Parameter Expansion in zshexpn(1) for complete details.
In the parameter lists that follow, the mark `<S>' indicates that the
parameter is special. Special parameters cannot have their type
changed, and they stay special even if unset. `<Z>' indicates that the
parameter does not exist when the shell initializes in sh or ksh emula‐
tion mode.
ARRAY PARAMETERS
To assign an array value, write one of:
set -A name value ...
name=(value ...)
If no parameter name exists, an ordinary array parameter is created.
If the parameter name exists and is a scalar, it is replaced by a new
array. Ordinary array parameters may also be explicitly declared with:
typeset -a name
Associative arrays must be declared before assignment, by using:
typeset -A name
When name refers to an associative array, the list in an assignment is
interpreted as alternating keys and values:
set -A name key value ...
name=(key value ...)
Every key must have a value in this case. Note that this assigns to
the entire array, deleting any elements that do not appear in the list.
To create an empty array (including associative arrays), use one of:
set -A name
name=()
Array Subscripts
Individual elements of an array may be selected using a subscript. A
subscript of the form `[exp]' selects the single element exp, where exp
is an arithmetic expression which will be subject to arithmetic expan‐
sion as if it were surrounded by `$((...))'. The elements are numbered
beginning with 1, unless the KSH_ARRAYS option is set in which case
they are numbered from zero.
Subscripts may be used inside braces used to delimit a parameter name,
thus `${foo[2]}' is equivalent to `$foo[2]'. If the KSH_ARRAYS option
is set, the braced form is the only one that works, as bracketed
expressions otherwise are not treated as subscripts.
The same subscripting syntax is used for associative arrays, except
that no arithmetic expansion is applied to exp. However, the parsing
rules for arithmetic expressions still apply, which affects the way
that certain special characters must be protected from interpretation.
See Subscript Parsing below for details.
A subscript of the form `[*]' or `[@]' evaluates to all elements of an
array; there is no difference between the two except when they appear
within double quotes. `"$foo[*]"' evaluates to `"$foo[1] $foo[2]
..."', whereas `"$foo[@]"' evaluates to `"$foo[1]" "$foo[2]" ...'. For
associative arrays, `[*]' or `[@]' evaluate to all the values (not the
keys, but see Subscript Flags below), in no particular order. When an
array parameter is referenced as `$name' (with no subscript) it evalu‐
ates to `$name[*]', unless the KSH_ARRAYS option is set in which case
it evaluates to `${name[0]}' (for an associative array, this means the
value of the key `0', which may not exist even if there are values for
other keys).
A subscript of the form `[exp1,exp2]' selects all elements in the range
exp1 to exp2, inclusive. (Associative arrays are unordered, and so do
not support ranges.) If one of the subscripts evaluates to a negative
number, say -n, then the nth element from the end of the array is used.
Thus `$foo[-3]' is the third element from the end of the array foo, and
`$foo[1,-1]' is the same as `$foo[*]'.
Subscripting may also be performed on non-array values, in which case
the subscripts specify a substring to be extracted. For example, if
FOO is set to `foobar', then `echo $FOO[2,5]' prints `ooba'.
Array Element Assignment
A subscript may be used on the left side of an assignment like so:
name[exp]=value
In this form of assignment the element or range specified by exp is
replaced by the expression on the right side. An array (but not an
associative array) may be created by assignment to a range or element.
Arrays do not nest, so assigning a parenthesized list of values to an
element or range changes the number of elements in the array, shifting
the other elements to accommodate the new values. (This is not sup‐
ported for associative arrays.)
This syntax also works as an argument to the typeset command:
typeset "name[exp]"=value
The value may not be a parenthesized list in this case; only sin‐
gle-element assignments may be made with typeset. Note that quotes are
necessary in this case to prevent the brackets from being interpreted
as filename generation operators. The noglob precommand modifier could
be used instead.
To delete an element of an ordinary array, assign `()' to that element.
To delete an element of an associative array, use the unset command:
unset "name[exp]"
Subscript Flags
If the opening bracket, or the comma in a range, in any subscript
expression is directly followed by an opening parenthesis, the string
up to the matching closing one is considered to be a list of flags, as
in `name[(flags)exp]'. The flags currently understood are:
w If the parameter subscripted is a scalar than this flag makes
subscripting work on words instead of characters. The default
word separator is whitespace.
s:string:
This gives the string that separates words (for use with the w
flag).
p Recognize the same escape sequences as the print builtin in the
string argument of a subsequent `s' flag.
f If the parameter subscripted is a scalar than this flag makes
subscripting work on lines instead of characters, i.e. with ele‐
ments separated by newlines. This is a shorthand for `pws:\n:'.
r Reverse subscripting: if this flag is given, the exp is taken as
a pattern and the result is the first matching array element,
substring or word (if the parameter is an array, if it is a
scalar, or if it is a scalar and the `w' flag is given, respec‐
tively). The subscript used is the number of the matching ele‐
ment, so that pairs of subscripts such as `$foo[(r)??,3]' and
`$foo[(r)??,(r)f*]' are possible. If the parameter is an asso‐
ciative array, only the value part of each pair is compared to
the pattern, and the result is that value. Reverse subscripts
may be used for assigning to ordinary array elements, but not
for assigning to associative arrays.
R Like `r', but gives the last match. For associative arrays,
gives all possible matches.
i Like `r', but gives the index of the match instead; this may not
be combined with a second argument. On the left side of an
assignment, behaves like `r'. For associative arrays, the key
part of each pair is compared to the pattern, and the first
matching key found is the result.
I Like `i', but gives the index of the last match, or all possible
matching keys in an associative array.
k If used in a subscript on an associative array, this flag causes
the keys to be interpreted as patterns, and returns the value
for the first key found where exp is matched by the key. This
flag does not work on the left side of an assignment to an asso‐
ciative array element. If used on another type of parameter,
this behaves like `r'.
K On an associative array this is like `k' but returns all values
where exp is matched by the keys. On other types of parameters
this has the same effect as `R'.
n:expr:
If combined with `r', `R', `i' or `I', makes them give the nth
or nth last match (if expr evaluates to n). This flag is
ignored when the array is associative.
b:expr:
If combined with `r', `R', `i' or `I', makes them begin at the
nth or nth last element, word, or character (if expr evaluates
to n). This flag is ignored when the array is associative.
e This flag has no effect and for ordinary arrays is retained for
backward compatibility only. For associative arrays, this flag
can be used to force * or @ to be interpreted as a single key
rather than as a reference to all values. This flag may be used
on the left side of an assignment.
See Parameter Expansion Flags (zshexpn(1)) for additional ways to
manipulate the results of array subscripting.
Subscript Parsing
This discussion applies mainly to associative array key strings and to
patterns used for reverse subscripting (the `r', `R', `i', etc. flags),
but it may also affect parameter substitutions that appear as part of
an arithmetic expression in an ordinary subscript.
The basic rule to remember when writing a subscript expression is that
all text between the opening `[' and the closing `]' is interpreted as
if it were in double quotes (see zshmisc(1)). However, unlike double
quotes which normally cannot nest, subscript expressions may appear
inside double-quoted strings or inside other subscript expressions (or
both!), so the rules have two important differences.
The first difference is that brackets (`[' and `]') must appear as bal‐
anced pairs in a subscript expression unless they are preceded by a
backslash (`\'). Therefore, within a subscript expression (and unlike
true double-quoting) the sequence `\[' becomes `[', and similarly `\]'
becomes `]'. This applies even in cases where a backslash is not nor‐
mally required; for example, the pattern `[^[]' (to match any character
other than an open bracket) should be written `[^\[]' in a reverse-sub‐
script pattern. However, note that `\[^\[\]' and even `\[^[]' mean the
same thing, because backslashes are always stripped when they appear
before brackets!
The same rule applies to parentheses (`(' and `)') and braces (`{' and
`}'): they must appear either in balanced pairs or preceded by a back‐
slash, and backslashes that protect parentheses or braces are removed
during parsing. This is because parameter expansions may be surrounded
balanced braces, and subscript flags are introduced by balanced paren‐
thesis.
The second difference is that a double-quote (`"') may appear as part
of a subscript expression without being preceded by a backslash, and
therefore that the two characters `\"' remain as two characters in the
subscript (in true double-quoting, `\"' becomes `"'). However, because
of the standard shell quoting rules, any double-quotes that appear must
occur in balanced pairs unless preceded by a backslash. This makes it
more difficult to write a subscript expression that contains an odd
number of double-quote characters, but the reason for this difference
is so that when a subscript expression appears inside true dou‐
ble-quotes, one can still write `\"' (rather than `\\\"') for `"'.
To use an odd number of double quotes as a key in an assignment, use
the typeset builtin and an enclosing pair of double quotes; to refer to
the value of that key, again use double quotes:
typeset -A aa
typeset "aa[one\"two\"three\"quotes]"=QQQ
print "$aa[one\"two\"three\"quotes]"
It is important to note that the quoting rules do not change when a
parameter expansion with a subscript is nested inside another subscript
expression. That is, it is not necessary to use additional backslashes
within the inner subscript expression; they are removed only once, from
the innermost subscript outwards. Parameters are also expanded from
the innermost subscript first, as each expansion is encountered left to
right in the outer expression.
A further complication arises from a way in which subscript parsing is
not different from double quote parsing. As in true double-quoting,
the sequences `\*', and `\@' remain as two characters when they appear
in a subscript expression. To use a literal `*' or `@' as an associa‐
tive array key, the `e' flag must be used:
typeset -A aa
aa[(e)*]=star
print $aa[(e)*]
A last detail must be considered when reverse subscripting is per‐
formed. Parameters appearing in the subscript expression are first
expanded and then the complete expression is interpreted as a pattern.
This has two effects: first, parameters behave as if GLOB_SUBST were on
(and it cannot be turned off); second, backslashes are interpreted
twice, once when parsing the array subscript and again when parsing the
pattern. In a reverse subscript, it's necessary to use four back‐
slashes to cause a single backslash to match literally in the pattern.
For complex patterns, it is often easiest to assign the desired pattern
to a parameter and then refer to that parameter in the subscript,
because then the backslashes, brackets, parentheses, etc., are seen
only when the complete expression is converted to a pattern. To match
the value of a parameter literally in a reverse subscript, rather than
as a pattern, use `${(q)name}' (see zshexpn(1)) to quote the expanded
value.
Note that the `k' and `K' flags are reverse subscripting for an ordi‐
nary array, but are not reverse subscripting for an associative array!
(For an associative array, the keys in the array itself are interpreted
as patterns by those flags; the subscript is a plain string in that
case.)
One final note, not directly related to subscripting: the numeric names
of positional parameters (described below) are parsed specially, so for
example `$2foo' is equivalent to `${2}foo'. Therefore, to use sub‐
script syntax to extract a substring from a positional parameter, the
expansion must be surrounded by braces; for example, `${2[3,5]}' evalu‐
ates to the third through fifth characters of the second positional
parameter, but `$2[3,5]' is the entire second parameter concatenated
with the filename generation pattern `[3,5]'.
POSITIONAL PARAMETERS
The positional parameters provide access to the command-line arguments
of a shell function, shell script, or the shell itself; see the section
`Invocation', and also the section `Functions'. The parameter n, where
n is a number, is the nth positional parameter. The parameters *, @
and argv are arrays containing all the positional parameters; thus
`$argv[n]', etc., is equivalent to simply `$n'.
Positional parameters may be changed after the shell or function starts
by using the set builtin, by assigning to the argv array, or by direct
assignment of the form `n=value' where n is the number of the posi‐
tional parameter to be changed. This also creates (with empty values)
any of the positions from 1 to n that do not already have values. Note
that, because the positional parameters form an array, an array assign‐
ment of the form `n=(value ...)' is allowed, and has the effect of
shifting all the values at positions greater than n by as many posi‐
tions as necessary to accommodate the new values.
LOCAL PARAMETERS
Shell function executions delimit scopes for shell parameters. (Param‐
eters are dynamically scoped.) The typeset builtin, and its alterna‐
tive forms declare, integer, local and readonly (but not export), can
be used to declare a parameter as being local to the innermost scope.
When a parameter is read or assigned to, the innermost existing parame‐
ter of that name is used. (That is, the local parameter hides any
less-local parameter.) However, assigning to a non-existent parameter,
or declaring a new parameter with export, causes it to be created in
the outermost scope.
Local parameters disappear when their scope ends. unset can be used to
delete a parameter while it is still in scope; any outer parameter of
the same name remains hidden.
Special parameters may also be made local; they retain their special
attributes unless either the existing or the newly-created parameter
has the -h (hide) attribute. This may have unexpected effects: there
is no default value, so if there is no assignment at the point the
variable is made local, it will be set to an empty value (or zero in
the case of integers). The following:
typeset PATH=/new/directory:$PATH
is valid for temporarily allowing the shell or programmes called from
it to find the programs in /new/directory inside a function.
Note that the restriction in older versions of zsh that local parame‐
ters were never exported has been removed.
PARAMETERS SET BY THE SHELL
The following parameters are automatically set by the shell:
! <S> The process ID of the last background command invoked.
# <S> The number of positional parameters in decimal. Note that some
confusion may occur with the syntax $#param which substitutes
the length of param. Use ${#} to resolve ambiguities. In par‐
ticular, the sequence `$#-...' in an arithmetic expression is
interpreted as the length of the parameter -, q.v.
ARGC <S> <Z>
Same as #.
$ <S> The process ID of this shell.
- <S> Flags supplied to the shell on invocation or by the set or
setopt commands.
* <S> An array containing the positional parameters.
argv <S> <Z>
Same as *. Assigning to argv changes the local positional
parameters, but argv is not itself a local parameter. Deleting
argv with unset in any function deletes it everywhere, although
only the innermost positional parameter array is deleted (so *
and @ in other scopes are not affected).
@ <S> Same as argv[@], even when argv is not set.
? <S> The exit value returned by the last command.
0 <S> The name used to invoke the current shell. If the FUNC‐
TION_ARGZERO option is set, this is set temporarily within a
shell function to the name of the function, and within a sourced
script to the name of the script.
status <S> <Z>
Same as ?.
pipestatus <S> <Z>
An array containing the exit values returned by all commands in
the last pipeline.
_ <S> The last argument of the previous command. Also, this parameter
is set in the environment of every command executed to the full
pathname of the command.
CPUTYPE
The machine type (microprocessor class or machine model), as
determined at run time.
EGID <S>
The effective group ID of the shell process. If you have suffi‐
cient privileges, you may change the effective group ID of the
shell process by assigning to this parameter. Also (assuming
sufficient privileges), you may start a single command with a
different effective group ID by `(EGID=gid; command)'
EUID <S>
The effective user ID of the shell process. If you have suffi‐
cient privileges, you may change the effective user ID of the
shell process by assigning to this parameter. Also (assuming
sufficient privileges), you may start a single command with a
different effective user ID by `(EUID=uid; command)'
ERRNO <S>
The value of errno (see errno(3)) as set by the most recently
failed system call. This value is system dependent and is
intended for debugging purposes.
GID <S>
The real group ID of the shell process. If you have sufficient
privileges, you may change the group ID of the shell process by
assigning to this parameter. Also (assuming sufficient privi‐
leges), you may start a single command under a different group
ID by `(GID=gid; command)'
HOST The current hostname.
LINENO <S>
The line number of the current line within the current script,
sourced file, or shell function being executed, whichever was
started most recently. Note that in the case of shell functions
the line number refers to the function as it appeared in the
original definition, not necessarily as displayed by the func‐
tions builtin.
LOGNAME
If the corresponding variable is not set in the environment of
the shell, it is initialized to the login name corresponding to
the current login session. This parameter is exported by default
but this can be disabled using the typeset builtin.
MACHTYPE
The machine type (microprocessor class or machine model), as
determined at compile time.
OLDPWD The previous working directory. This is set when the shell ini‐
tializes and whenever the directory changes.
OPTARG <S>
The value of the last option argument processed by the getopts
command.
OPTIND <S>
The index of the last option argument processed by the getopts
command.
OSTYPE The operating system, as determined at compile time.
PPID <S>
The process ID of the parent of the shell.
PWD The present working directory. This is set when the shell ini‐
tializes and whenever the directory changes.
RANDOM <S>
A random integer from 0 to 32767, newly generated each time this
parameter is referenced. The random number generator can be
seeded by assigning a numeric value to RANDOM.
SECONDS <S>
The number of seconds since shell invocation. If this parameter
is assigned a value, then the value returned upon reference will
be the value that was assigned plus the number of seconds since
the assignment.
SHLVL <S>
Incremented by one each time a new shell is started.
signals
An array containing the names of the signals.
TTY The name of the tty associated with the shell, if any.
TTYIDLE <S>
The idle time of the tty associated with the shell in seconds or
-1 if there is no such tty.
UID <S>
The real user ID of the shell process. If you have sufficient
privileges, you may change the user ID of the shell by assigning
to this parameter. Also (assuming sufficient privileges), you
may start a single command under a different user ID by
`(UID=uid; command)'
USERNAME <S>
The username corresponding to the real user ID of the shell
process. If you have sufficient privileges, you may change the
username (and also the user ID and group ID) of the shell by
assigning to this parameter. Also (assuming sufficient privi‐
leges), you may start a single command under a different user‐
name (and user ID and group ID) by `(USERNAME=username; com‐
mand)'
VENDOR The vendor, as determined at compile time.
ZSH_NAME
Expands to the basename of the command used to invoke this
instance of zsh.
ZSH_VERSION
The version number of this zsh.
PARAMETERS USED BY THE SHELL
The following parameters are used by the shell.
In cases where there are two parameters with an upper- and lowercase
form of the same name, such as path and PATH, the lowercase form is an
array and the uppercase form is a scalar with the elements of the array
joined together by colons. These are similar to tied parameters cre‐
ated via `typeset -T'. The normal use for the colon-separated form is
for exporting to the environment, while the array form is easier to
manipulate within the shell. Note that unsetting either of the pair
will unset the other; they retain their special properties when recre‐
ated, and recreating one of the pair will recreate the other.
ARGV0 If exported, its value is used as the argv[0] of external com‐
mands. Usually used in constructs like `ARGV0=emacs nethack'.
BAUD The baud rate of the current connection. Used by the line edi‐
tor update mechanism to compensate for a slow terminal by delay‐
ing updates until necessary. This may be profitably set to a
lower value in some circumstances, e.g. for slow modems dialing
into a communications server which is connected to a host via a
fast link; in this case, this variable would be set by default
to the speed of the fast link, and not the modem. This parame‐
ter should be set to the baud rate of the slowest part of the
link for best performance. The compensation mechanism can be
turned off by setting the variable to zero.
cdpath <S> <Z> (CDPATH <S>)
An array (colon-separated list) of directories specifying the
search path for the cd command.
COLUMNS <S>
The number of columns for this terminal session. Used for
printing select lists and for the line editor.
DIRSTACKSIZE
The maximum size of the directory stack. If the stack gets
larger than this, it will be truncated automatically. This is
useful with the AUTO_PUSHD option.
FCEDIT The default editor for the fc builtin.
fignore <S> <Z> (FIGNORE <S>)
An array (colon separated list) containing the suffixes of files
to be ignored during filename completion. However, if the com‐
pletion generates only files which would match if this variable
would be ignored, than these files are completed anyway.
fpath <S> <Z> (FPATH <S>)
An array (colon separated list) of directories specifying the
search path for function definitions. This path is searched
when a function with the -u attribute is referenced. If an exe‐
cutable file is found, then it is read and executed in the cur‐
rent environment.
histchars <S>
Three characters used by the shell's history and lexical analy‐
sis mechanism. The first character signals the start of a his‐
tory expansion (default `!'). The second character signals the
start of a quick history substitution (default `^'). The third
character is the comment character (default `#').
HISTCHARS <S> <Z>
Same as histchars. (Deprecated.)
HISTFILE
The file to save the history in when an interactive shell exits.
If unset, the history is not saved.
HISTSIZE <S>
The maximum number of events stored in the internal history
list. If you use the HIST_EXPIRE_DUPS_FIRST option, setting
this value larger than the SAVEHIST size will give you the dif‐
ference as a cushion for saving duplicated history events.
HOME <S>
The default argument for the cd command.
IFS <S>
Internal field separators (by default space, tab, newline and
NUL), that are used to separate words which result from command
or parameter expansion and words read by the read builtin. Any
characters from the set space, tab and newline that appear in
the IFS are called IFS white space. One or more IFS white space
characters or one non-IFS white space character together with
any adjacent IFS white space character delimit a field. If an
IFS white space character appears twice consecutively in the
IFS, this character is treated as if it were not an IFS white
space character.
KEYTIMEOUT
The time the shell waits, in hundredths of seconds, for another
key to be pressed when reading bound multi-character sequences.
LANG <S>
This variable determines the locale category for any category
not specifically selected via a variable starting with `LC_'.
LC_ALL <S>
This variable overrides the value of the `LANG' variable and the
value of any of the other variables starting with `LC_'.
LC_COLLATE <S>
This variable determines the locale category for character col‐
lation information within ranges in glob brackets and for sort‐
ing.
LC_CTYPE <S>
This variable determines the locale category for character han‐
dling functions.
LC_MESSAGES <S>
This variable determines the language in which messages should
be written. Note that zsh does not use message catalogs.
LC_NUMERIC <S>
This variable affects the decimal point character and thousands
separator character for the formatted input/output functions and
string conversion functions. Note that zsh ignores this setting
when parsing floating point mathematical expressions.
LC_TIME <S>
This variable determines the locale category for date and time
formatting in prompt escape sequences.
LINES <S>
The number of lines for this terminal session. Used for print‐
ing select lists and for the line editor.
LISTMAX
In the line editor, the number of matches to list without asking
first. If the value is negative, the list will be shown if it
spans at most as many lines as given by the absolute value. If
set to zero, the shell asks only if the top of the listing would
scroll off the screen.
LOGCHECK
The interval in seconds between checks for login/logout activity
using the watch parameter.
MAIL If this parameter is set and mailpath is not set, the shell
looks for mail in the specified file.
MAILCHECK
The interval in seconds between checks for new mail.
mailpath <S> <Z> (MAILPATH <S>)
An array (colon-separated list) of filenames to check for new
mail. Each filename can be followed by a `?' and a message that
will be printed. The message will undergo parameter expansion,
command substitution and arithmetic expansion with the variable
$_ defined as the name of the file that has changed. The
default message is `You have new mail'. If an element is a
directory instead of a file the shell will recursively check
every file in every subdirectory of the element.
manpath <S> <Z> (MANPATH <S> <Z>)
An array (colon-separated list) whose value is not used by the
shell. The manpath array can be useful, however, since setting
it also sets MANPATH, and vice versa.
module_path <S> <Z> (MODULE_PATH <S>)
An array (colon-separated list) of directories that zmodload
searches for dynamically loadable modules. This is initialized
to a standard pathname, usually `/usr/local/lib/zsh/$ZSH_VER‐
SION'. (The `/usr/local/lib' part varies from installation to
installation.) For security reasons, any value set in the envi‐
ronment when the shell is started will be ignored.
These parameters only exist if the installation supports dynamic
module loading.
NULLCMD <S>
The command name to assume if a redirection is specified with no
command. Defaults to cat. For sh/ksh behavior, change this to
:. For csh-like behavior, unset this parameter; the shell will
print an error message if null commands are entered.
path <S> <Z> (PATH <S>)
An array (colon-separated list) of directories to search for
commands. When this parameter is set, each directory is scanned
and all files found are put in a hash table.
POSTEDIT <S>
This string is output whenever the line editor exits. It usu‐
ally contains termcap strings to reset the terminal.
PROMPT <S> <Z>
PROMPT2 <S> <Z>
PROMPT3 <S> <Z>
PROMPT4 <S> <Z>
Same as PS1, PS2, PS3 and PS4, respectively.
prompt <S> <Z>
Same as PS1.
PS1 <S>
The primary prompt string, printed before a command is read.
the default is `%m%# '. It undergoes a special form of expan‐
sion before being displayed; see the section `Prompt Expansion'.
PS2 <S>
The secondary prompt, printed when the shell needs more informa‐
tion to complete a command. It is expanded in the same way as
PS1. The default is `%_> ', which displays any shell constructs
or quotation marks which are currently being processed.
PS3 <S>
Selection prompt used within a select loop. It is expanded in
the same way as PS1. The default is `?# '.
PS4 <S>
The execution trace prompt. Default is `+%N:%i> ', which dis‐
plays the name of the current shell structure and the line num‐
ber within it. In sh or ksh emulation, the default is `+ '.
psvar <S> <Z> (PSVAR <S>)
An array (colon-separated list) whose first nine values can be
used in PROMPT strings. Setting psvar also sets PSVAR, and vice
versa.
READNULLCMD <S>
The command name to assume if a single input redirection is
specified with no command. Defaults to more.
REPORTTIME
If nonnegative, commands whose combined user and system execu‐
tion times (measured in seconds) are greater than this value
have timing statistics printed for them.
REPLY This parameter is reserved by convention to pass string values
between shell scripts and shell builtins in situations where a
function call or redirection are impossible or undesirable. The
read builtin and the select complex command may set REPLY, and
filename generation both sets and examines its value when evalu‐
ating certain expressions. Some modules also employ REPLY for
similar purposes.
reply As REPLY, but for array values rather than strings.
RPROMPT <S>
RPS1 <S>
This prompt is displayed on the right-hand side of the screen
when the primary prompt is being displayed on the left. This
does not work if the SINGLELINEZLE option is set. It is
expanded in the same way as PS1.
SAVEHIST
The maximum number of history events to save in the history
file.
SPROMPT <S>
The prompt used for spelling correction. The sequence `%R'
expands to the string which presumably needs spelling correc‐
tion, and `%r' expands to the proposed correction. All other
prompt escapes are also allowed.
STTY If this parameter is set in a command's environment, the shell
runs the stty command with the value of this parameter as argu‐
ments in order to set up the terminal before executing the com‐
mand. The modes apply only to the command, and are reset when it
finishes or is suspended. If the command is suspended and con‐
tinued later with the fg or wait builtins it will see the modes
specified by STTY, as if it were not suspended. This (inten‐
tionally) does not apply if the command is continued via `kill
-CONT'. STTY is ignored if the command is run in the back‐
ground, or if it is in the environment of the shell but not
explicitly assigned to in the input line. This avoids running
stty at every external command by accidentally exporting it.
Also note that STTY should not be used for window size specifi‐
cations; these will not be local to the command.
TERM <S>
The type of terminal in use. This is used when looking up term‐
cap sequences. An assignment to TERM causes zsh to re-initial‐
ize the terminal, even if the value does not change (e.g.,
`TERM=$TERM'). It is necessary to make such an assignment upon
any change to the terminal definition database or terminal type
in order for the new settings to take effect.
TIMEFMT
The format of process time reports with the time keyword. The
default is `%E real %U user %S system %P %J'. Recognizes the
following escape sequences:
%% A `%'.
%U CPU seconds spent in user mode.
%S CPU seconds spent in kernel mode.
%E Elapsed time in seconds.
%P The CPU percentage, computed as (%U+%S)/%E.
%J The name of this job.
A star may be inserted between the percent sign and flags print‐
ing time. This cause the time to be printed in `hh:mm:ss.ttt'
format (hours and minutes are only printed if they are not
zero).
TMOUT If this parameter is nonzero, the shell will receive an ALRM
signal if a command is not entered within the specified number
of seconds after issuing a prompt. If there is a trap on
SIGALRM, it will be executed and a new alarm is scheduled using
the value of the TMOUT parameter after executing the trap. If
no trap is set, and the idle time of the terminal is not less
than the value of the TMOUT parameter, zsh terminates. Other‐
wise a new alarm is scheduled to TMOUT seconds after the last
keypress.
TMPPREFIX
A pathname prefix which the shell will use for all temporary
files. Note that this should include an initial part for the
file name as well as any directory names. The default is
`/tmp/zsh'.
watch <S> <Z> (WATCH <S>)
An array (colon-separated list) of login/logout events to
report. If it contains the single word `all', then all
login/logout events are reported. If it contains the single
word `notme', then all events are reported as with `all' except
$USERNAME. An entry in this list may consist of a username, an
`@' followed by a remote hostname, and a `%' followed by a line
(tty). Any or all of these components may be present in an
entry; if a login/logout event matches all of them, it is
reported.
WATCHFMT
The format of login/logout reports if the watch parameter is
set. Default is `%n has %a %l from %m'. Recognizes the follow‐
ing escape sequences:
%n The name of the user that logged in/out.
%a The observed action, i.e. "logged on" or "logged off".
%l The line (tty) the user is logged in on.
%M The full hostname of the remote host.
%m The hostname up to the first `.'. If only the IP address
is available or the utmp field contains the name of an
X-windows display, the whole name is printed.
NOTE: The `%m' and `%M' escapes will work only if there
is a host name field in the utmp on your machine. Other‐
wise they are treated as ordinary strings.
%S (%s)
Start (stop) standout mode.
%U (%u)
Start (stop) underline mode.
%B (%b)
Start (stop) boldface mode.
%t
%@ The time, in 12-hour, am/pm format.
%T The time, in 24-hour format.
%w The date in `day-dd' format.
%W The date in `mm/dd/yy' format.
%D The date in `yy-mm-dd' format.
%(x:true-text:false-text)
Specifies a ternary expression. The character following
the x is arbitrary; the same character is used to sepa‐
rate the text for the "true" result from that for the
"false" result. Both the separator and the right paren‐
thesis may be escaped with a backslash. Ternary expres‐
sions may be nested.
The test character x may be any one of `l', `n', `m' or
`M', which indicate a `true' result if the corresponding
escape sequence would return a non-empty value; or it may
be `a', which indicates a `true' result if the watched
user has logged in, or `false' if he has logged out.
Other characters evaluate to neither true nor false; the
entire expression is omitted in this case.
If the result is `true', then the true-text is formatted
according to the rules above and printed, and the
false-text is skipped. If `false', the true-text is
skipped and the false-text is formatted and printed.
Either or both of the branches may be empty, but both
separators must be present in any case.
WORDCHARS <S>
A list of non-alphanumeric characters considered part of a word
by the line editor.
ZBEEP If set, this gives a string of characters, which can use all the
same codes as the bindkey command as described in the zsh/zle
module entry in zshmodules(1), that will be output to the termi‐
nal instead of beeping. This may have a visible instead of an
audible effect; for example, the string `\e[?5h\e[?5l' on a
vt100 or xterm will have the effect of flashing reverse video on
and off (if you usually use reverse video, you should use the
string `\e[?5l\e[?5h' instead). This takes precedence over the
NOBEEP option.
ZDOTDIR
The directory to search for shell startup files (.zshrc, etc),
if not $HOME.
ZSHOPTIONS(1)ZSHOPTIONS(1)NAME
zshoptions - zsh options
SPECIFYING OPTIONS
Options are primarily referred to by name. These names are case insen‐
sitive and underscores are ignored. For example, `allexport' is equiv‐
alent to `A__lleXP_ort'.
The sense of an option name may be inverted by preceding it with `no',
so `setopt No_Beep' is equivalent to `unsetopt beep'. This inversion
can only be done once, so `nonobeep' is not a synonym for `beep'. Sim‐
ilarly, `tify' is not a synonym for `nonotify' (the inversion of
`notify').
Some options also have one or more single letter names. There are two
sets of single letter options: one used by default, and another used to
emulate sh/ksh (used when the SH_OPTION_LETTERS option is set). The
single letter options can be used on the shell command line, or with
the set, setopt and unsetopt builtins, as normal Unix options preceded
by `-'.
The sense of the single letter options may be inverted by using `+'
instead of `-'. Some of the single letter option names refer to an
option being off, in which case the inversion of that name refers to
the option being on. For example, `+n' is the short name of `exec',
and `-n' is the short name of its inversion, `noexec'.
In strings of single letter options supplied to the shell at startup,
trailing whitespace will be ignored; for example the string `-f '
will be treated just as `-f', but the string `-f i' is an error. This
is because many systems which implement the `#!' mechanism for calling
scripts do not strip trailing whitespace.
DESCRIPTION OF OPTIONS
In the following list, options set by default in all emulations are
marked <D>; those set by default only in csh, ksh, sh, or zsh emula‐
tions are marked <C>, <K>, <S>, <Z> as appropriate. When listing
options (by `setopt', `unsetopt', `set -o' or `set +o'), those turned
on by default appear in the list prefixed with `no'. Hence (unless
KSH_OPTION_PRINT is set), `setopt' shows all options whose settings are
changed from the default.
ALIASES <D>
Expand aliases.
ALL_EXPORT (-a, ksh: -a)
All parameters subsequently defined are automatically exported.
ALWAYS_LAST_PROMPT <D>
If unset, key functions that list completions try to return to
the last prompt if given a numeric argument. If set these func‐
tions try to return to the last prompt if given no numeric argu‐
ment.
ALWAYS_TO_END
If a completion is performed with the cursor within a word, and
a full completion is inserted, the cursor is moved to the end of
the word. That is, the cursor is moved to the end of the word
if either a single match is inserted or menu completion is per‐
formed.
APPEND_HISTORY <D>
If this is set, zsh sessions will append their history list to
the history file, rather than overwrite it. Thus, multiple par‐
allel zsh sessions will all have their history lists added to
the history file, in the order they are killed.
AUTO_CD (-J)
If a command is issued that can't be executed as a normal com‐
mand, and the command is the name of a directory, perform the cd
command to that directory.
AUTO_LIST (-9) <D>
Automatically list choices on an ambiguous completion.
AUTO_MENU <D>
Automatically use menu completion after the second consecutive
request for completion, for example by pressing the tab key
repeatedly. This option is overridden by MENU_COMPLETE.
AUTO_NAME_DIRS
Any parameter that is set to the absolute name of a directory
immediately becomes a name for that directory, that will be used
by the `%~' and related prompt sequences, and will be available
when completion is performed on a word starting with `~'. (Oth‐
erwise, the parameter must be used in the form `~param' first.)
AUTO_PARAM_KEYS <D>
If a parameter name was completed and a following character
(normally a space) automatically inserted, and the next charac‐
ter typed is one of those that have to come directly after the
name (like `}', `:', etc.), the automatically added character is
deleted, so that the character typed comes immediately after the
parameter name. Completion in a brace expansion is affected
similarly: the added character is a `,', which will be removed
if `}' is typed next.
AUTO_PARAM_SLASH <D>
If a parameter is completed whose content is the name of a
directory, then add a trailing slash instead of a space.
AUTO_PUSHD (-N)
Make cd push the old directory onto the directory stack.
AUTO_REMOVE_SLASH <D>
When the last character resulting from a completion is a slash
and the next character typed is a word delimiter, a slash, or a
character that ends a command (such as a semicolon or an amper‐
sand), remove the slash.
AUTO_RESUME (-W)
Treat single word simple commands without redirection as candi‐
dates for resumption of an existing job.
BAD_PATTERN (+2) <C> <Z>
If a pattern for filename generation is badly formed, print an
error message. (If this option is unset, the pattern will be
left unchanged.)
BANG_HIST (+K) <C> <Z>
Perform textual history expansion, csh-style, treating the char‐
acter `!' specially.
BARE_GLOB_QUAL <Z>
In a glob pattern, treat a trailing set of parentheses as a
qualifier list, if it contains no `|', `(' or (if special) `~'
characters. See the section `Filename Generation'.
BASH_AUTO_LIST
On an ambiguous completion, automatically list choices when the
completion function is called twice in succession. This takes
precedence over AUTO_LIST. The setting of LIST_AMBIGUOUS is
respected. If AUTO_MENU is set, the menu behaviour will then
start with the third press. Note that this will not work with
MENU_COMPLETE, since repeated completion calls immediately cycle
through the list in that case.
BEEP (+B) <D>
Beep on error in ZLE.
BG_NICE (-6) <C> <Z>
Run all background jobs at a lower priority. This option is set
by default.
BRACE_CCL
Expand expressions in braces which would not otherwise undergo
brace expansion to a lexically ordered list of all the charac‐
ters. See the section `Brace Expansion'.
BSD_ECHO <S>
Make the echo builtin compatible with the BSD echo(1) command.
This disables backslashed escape sequences in echo strings
unless the -e option is specified.
C_BASES
Output hexadecimal numbers in the standard C format, for example
`0xFF' instead of the usual `16#FF'. If the option OCTAL_ZEROES
is also set (it is not by default), octal numbers will be
treated similarly and hence appear as `077' instead of `8#77'.
This option has no effect on the choice of the output base, nor
on the output of bases other than hexadecimal and octal. Note
that these formats will be understood on input irrespective of
the setting of C_BASES.
CDABLE_VARS (-T)
If the argument to a cd command (or an implied cd with the
AUTO_CD option set) is not a directory, and does not begin with
a slash, try to expand the expression as if it were preceded by
a `~' (see the section `Filename Expansion').
CHASE_DOTS
When changing to a directory containing a path segment `..'
which would otherwise be treated as canceling the previous seg‐
ment in the path (in other words, `foo/..' would be removed from
the path, or if `..' is the first part of the path, the last
part of $PWD would be deleted), instead resolve the path to the
physical directory. This option is overridden by CHASE_LINKS.
For example, suppose /foo/bar is a link to the directory
/alt/rod. Without this option set, `cd /foo/bar/..' changes to
/foo; with it set, it changes to /alt. The same applies if the
current directory is /foo/bar and `cd ..' is used. Note that
all other symbolic links in the path will also be resolved.
CHASE_LINKS (-w)
Resolve symbolic links to their true values when changing direc‐
tory. This also has the effect of CHASE_DOTS, i.e. a `..' path
segment will be treated as referring to the physical parent,
even if the preceding path segment is a symbolic link.
CHECK_JOBS <Z>
Report the status of background and suspended jobs before exit‐
ing a shell with job control; a second attempt to exit the shell
will succeed. NO_CHECK_JOBS is best used only in combination
with NO_HUP, else such jobs will be killed automatically.
The check is omitted if the commands run from the previous com‐
mand line included a `jobs' command, since it is assumed the
user is aware that there are background or suspended jobs. A
`jobs' command run from the precmd function is not counted for
this purpose.
CLOBBER (+C, ksh: +C) <D>
Allows `>' redirection to truncate existing files, and `>>' to
create files. Otherwise `>!' or `>|' must be used to truncate a
file, and `>>!' or `>>|' to create a file.
COMPLETE_ALIASES
Prevents aliases on the command line from being internally sub‐
stituted before completion is attempted. The effect is to make
the alias a distinct command for completion purposes.
COMPLETE_IN_WORD
If unset, the cursor is set to the end of the word if completion
is started. Otherwise it stays there and completion is done from
both ends.
CORRECT (-0)
Try to correct the spelling of commands.
CORRECT_ALL (-O)
Try to correct the spelling of all arguments in a line.
CSH_JUNKIE_HISTORY <C>
A history reference without an event specifier will always refer
to the previous command. Without this option, such a history
reference refers to the same event as the previous history ref‐
erence, defaulting to the previous command.
CSH_JUNKIE_LOOPS <C>
Allow loop bodies to take the form `list; end' instead of `do
list; done'.
CSH_JUNKIE_QUOTES <C>
Changes the rules for single- and double-quoted text to match
that of csh. These require that embedded newlines be preceded
by a backslash; unescaped newlines will cause an error message.
In double-quoted strings, it is made impossible to escape `$',
``' or `"' (and `\' itself no longer needs escaping). Command
substitutions are only expanded once, and cannot be nested.
CSH_NULLCMD <C>
Do not use the values of NULLCMD and READNULLCMD when running
redirections with no command. This make such redirections fail
(see the section `Redirection').
CSH_NULL_GLOB <C>
If a pattern for filename generation has no matches, delete the
pattern from the argument list; do not report an error unless
all the patterns in a command have no matches. Overrides
NOMATCH.
DVORAK Use the Dvorak keyboard instead of the standard qwerty keyboard
as a basis for examining spelling mistakes for the CORRECT and
CORRECT_ALL options and the spell-word editor command.
EQUALS <Z>
Perform = filename expansion. (See the section `Filename Expan‐
sion'.)
ERR_EXIT (-e, ksh: -e)
If a command has a non-zero exit status, execute the ZERR trap,
if set, and exit. This is disabled while running initialization
scripts.
EXEC (+n, ksh: +n) <D>
Do execute commands. Without this option, commands are read and
checked for syntax errors, but not executed. This option cannot
be turned off in an interactive shell, except when `-n' is sup‐
plied to the shell at startup.
EXTENDED_GLOB
Treat the `#', `~' and `^' characters as part of patterns for
filename generation, etc. (An initial unquoted `~' always pro‐
duces named directory expansion.)
EXTENDED_HISTORY <C>
Save each command's beginning timestamp (in seconds since the
epoch) and the duration (in seconds) to the history file. The
format of this prefixed data is:
`:<beginning time>:<elapsed seconds>:<command>'.
FLOW_CONTROL <D>
If this option is unset, output flow control via start/stop
characters (usually assigned to ^S/^Q) is disabled in the
shell's editor.
FUNCTION_ARGZERO <C> <Z>
When executing a shell function or sourcing a script, set $0
temporarily to the name of the function/script.
GLOB (+F, ksh: +f) <D>
Perform filename generation (globbing). (See the section `File‐
name Generation'.)
GLOBAL_EXPORT (<Z>)
If this option is set, passing the -x flag to the builtins
declare, float, integer, readonly and typeset (but not local)
will also set the -g flag; hence parameters exported to the
environment will not be made local to the enclosing function,
unless they were already or the flag +g is given explicitly. If
the option is unset, exported parameters will be made local in
just the same way as any other parameter.
This option is set by default for backward compatibility; it is
not recommended that its behaviour be relied upon. Note that
the builtin export always sets both the -x and -g flags, and
hence its effect extends beyond the scope of the enclosing func‐
tion; this is the most portable way to achieve this behaviour.
GLOBAL_RCS (-d) <D>
If this option is unset, the startup files /etc/zprofile,
/etc/zshrc, /etc/zlogin and /etc/zlogout will not be run. It
can be disabled and re-enabled at any time, including inside
local startup files (.zshrc, etc.).
GLOB_ASSIGN <C>
If this option is set, filename generation (globbing) is per‐
formed on the right hand side of scalar parameter assignments of
the form `name=pattern (e.g. `foo=*'). If the result has more
than one word the parameter will become an array with those
words as arguments. This option is provided for backwards com‐
patibility only: globbing is always performed on the right hand
side of array assignments of the form `name=(value)' (e.g.
`foo=(*)') and this form is recommended for clarity; with this
option set, it is not possible to predict whether the result
will be an array or a scalar.
GLOB_COMPLETE
When the current word has a glob pattern, do not insert all the
words resulting from the expansion but generate matches as for
completion and cycle through them like MENU_COMPLETE. The
matches are generated as if a `*' was added to the end of the
word, or inserted at the cursor when COMPLETE_IN_WORD is set.
This actually uses pattern matching, not globbing, so it works
not only for files but for any completion, such as options, user
names, etc.
GLOB_DOTS (-4)
Do not require a leading `.' in a filename to be matched explic‐
itly.
GLOB_SUBST <C> <K> <S>
Treat any characters resulting from parameter expansion as being
eligible for file expansion and filename generation, and any
characters resulting from command substitution as being eligible
for filename generation. Braces (and commas in between) do not
become eligible for expansion.
HASH_CMDS <D>
Note the location of each command the first time it is executed.
Subsequent invocations of the same command will use the saved
location, avoiding a path search. If this option is unset, no
path hashing is done at all. However, when CORRECT is set, com‐
mands whose names do not appear in the functions or aliases hash
tables are hashed in order to avoid reporting them as spelling
errors.
HASH_DIRS <D>
Whenever a command name is hashed, hash the directory containing
it, as well as all directories that occur earlier in the path.
Has no effect if neither HASH_CMDS nor CORRECT is set.
HASH_LIST_ALL <D>
Whenever a command completion is attempted, make sure the entire
command path is hashed first. This makes the first completion
slower.
HIST_ALLOW_CLOBBER
Add `|' to output redirections in the history. This allows his‐
tory references to clobber files even when CLOBBER is unset.
HIST_BEEP <D>
Beep when an attempt is made to access a history entry which
isn't there.
HIST_EXPIRE_DUPS_FIRST
If the internal history needs to be trimmed to add the current
command line, setting this option will cause the oldest history
event that has a duplicate to be lost before losing a unique
event from the list. You should be sure to set the value of
HISTSIZE to a larger number than SAVEHIST in order to give you
some room for the duplicated events, otherwise this option will
behave just like HIST_IGNORE_ALL_DUPS once the history fills up
with unique events.
HIST_FIND_NO_DUPS
When searching for history entries in the line editor, do not
display duplicates of a line previously found, even if the
duplicates are not contiguous.
HIST_IGNORE_ALL_DUPS
If a new command line being added to the history list duplicates
an older one, the older command is removed from the list (even
if it is not the previous event).
HIST_IGNORE_DUPS (-h)
Do not enter command lines into the history list if they are
duplicates of the previous event.
HIST_IGNORE_SPACE (-g)
Remove command lines from the history list when the first char‐
acter on the line is a space, or when one of the expanded
aliases contains a leading space. Note that the command lingers
in the internal history until the next command is entered before
it vanishes, allowing you to briefly reuse or edit the line. If
you want to make it vanish right away without entering another
command, type a space and press return.
HIST_NO_FUNCTIONS
Remove function definitions from the history list. Note that
the function lingers in the internal history until the next com‐
mand is entered before it vanishes, allowing you to briefly re‐
use or edit the definition.
HIST_NO_STORE
Remove the history (fc -l) command from the history list when
invoked. Note that the command lingers in the internal history
until the next command is entered before it vanishes, allowing
you to briefly reuse or edit the line.
HIST_REDUCE_BLANKS
Remove superfluous blanks from each command line being added to
the history list.
HIST_SAVE_NO_DUPS
When writing out the history file, older commands that duplicate
newer ones are omitted.
HIST_VERIFY
Whenever the user enters a line with history expansion, don't
execute the line directly; instead, perform history expansion
and reload the line into the editing buffer.
HUP <Z>
Send the HUP signal to running jobs when the shell exits.
IGNORE_BRACES (-I) <S>
Do not perform brace expansion.
IGNORE_EOF (-7)
Do not exit on end-of-file. Require the use of exit or logout
instead. However, ten consecutive EOFs will cause the shell to
exit anyway, to avoid the shell hanging if its tty goes away.
Also, if this option is set and the Zsh Line Editor is used,
widgets implemented by shell functions can be bound to EOF (nor‐
mally Control-D) without printing the normal warning message.
This works only for normal widgets, not for completion widgets.
INC_APPEND_HISTORY
This options works like APPEND_HISTORY except that new history
lines are added to the $HISTFILE incrementally (as soon as they
are entered), rather than waiting until the shell is killed.
The file is periodically trimmed to the number of lines speci‐
fied by $SAVEHIST, but can exceed this value between trimmings.
INTERACTIVE (-i, ksh: -i)
This is an interactive shell. This option is set upon initiali‐
sation if the standard input is a tty and commands are being
read from standard input. (See the discussion of SHIN_STDIN.)
This heuristic may be overridden by specifying a state for this
option on the command line. The value of this option cannot be
changed anywhere other than the command line.
INTERACTIVE_COMMENTS (-k) <K> <S>
Allow comments even in interactive shells.
KSH_ARRAYS <K> <S>
Emulate ksh array handling as closely as possible. If this
option is set, array elements are numbered from zero, an array
parameter without subscript refers to the first element instead
of the whole array, and braces are required to delimit a sub‐
script (`${path[2]}' rather than just `$path[2]').
KSH_AUTOLOAD <K> <S>
Emulate ksh function autoloading. This means that when a func‐
tion is autoloaded, the corresponding file is merely executed,
and must define the function itself. (By default, the function
is defined to the contents of the file. However, the most com‐
mon ksh-style case - of the file containing only a simple defi‐
nition of the function - is always handled in the ksh-compatible
manner.)
KSH_GLOB <K>
In pattern matching, the interpretation of parentheses is
affected by a preceding `@', `*', `+', `?' or `!'. See the sec‐
tion `Filename Generation'.
KSH_OPTION_PRINT <K>
Alters the way options settings are printed: instead of separate
lists of set and unset options, all options are shown, marked
`on' if they are in the non-default state, `off' otherwise.
KSH_TYPESET <K>
Alters the way arguments to the typeset family of commands,
including declare, export, float, integer, local and readonly,
are processed. Without this option, zsh will perform normal
word splitting after command and parameter expansion in argu‐
ments of an assignment; with it, word splitting does not take
place in those cases.
LIST_AMBIGUOUS <D>
This option works when AUTO_LIST or BASH_AUTO_LIST is also set.
If there is an unambiguous prefix to insert on the command line,
that is done without a completion list being displayed; in other
words, auto-listing behaviour only takes place when nothing
would be inserted. In the case of BASH_AUTO_LIST, this means
that the list will be delayed to the third call of the function.
LIST_BEEP <D>
Beep on an ambiguous completion. More accurately, this forces
the completion widgets to return status 1 on an ambiguous com‐
pletion, which causes the shell to beep if the option BEEP is
also set; this may be modified if completion is called from a
user-defined widget.
LIST_PACKED
Try to make the completion list smaller (occupying less lines)
by printing the matches in columns with different widths.
LIST_ROWS_FIRST
Lay out the matches in completion lists sorted horizontally,
that is, the second match is to the right of the first one, not
under it as usual.
LIST_TYPES (-X) <D>
When listing files that are possible completions, show the type
of each file with a trailing identifying mark.
LOCAL_OPTIONS <K>
If this option is set at the point of return from a shell func‐
tion, all the options (including this one) which were in force
upon entry to the function are restored. Otherwise, only this
option and the XTRACE and PRINT_EXIT_VALUE options are restored.
Hence if this is explicitly unset by a shell function the other
options in force at the point of return will remain so. A shell
function can also guarantee itself a known shell configuration
with a formulation like `emulate -L zsh'; the -L activates
LOCAL_OPTIONS.
LOCAL_TRAPS <K>
If this option is set when a signal trap is set inside a func‐
tion, then the previous status of the trap for that signal will
be restored when the function exits. Note that this option must
be set prior to altering the trap behaviour in a function;
unlike LOCAL_OPTIONS, the value on exit from the function is
irrelevant. However, it does not need to be set before any
global trap for that to be correctly restored by a function.
For example,
unsetopt localtraps
trap - INT
fn() { setopt localtraps; trap '' INT; sleep 3; }
will restore normally handling of SIGINT after the function
exits.
LOGIN (-l, ksh: -l)
This is a login shell. If this option is not explicitly set,
the shell is a login shell if the first character of the argv[0]
passed to the shell is a `-'.
LONG_LIST_JOBS (-R)
List jobs in the long format by default.
MAGIC_EQUAL_SUBST
All unquoted arguments of the form `anything=expression' appear‐
ing after the command name have filename expansion (that is,
where expression has a leading `~' or `=') performed on expres‐
sion as if it were a parameter assignment. The argument is not
otherwise treated specially; it is passed to the command as a
single argument, and not used as an actual parameter assignment.
For example, in echo foo=~/bar:~/rod, both occurrences of ~
would be replaced. Note that this happens anyway with typeset
and similar statements.
This option respects the setting of the KSH_TYPESET option. In
other words, if both options are in effect, arguments looking
like assignments will not undergo wordsplitting.
MAIL_WARNING (-U)
Print a warning message if a mail file has been accessed since
the shell last checked.
MARK_DIRS (-8, ksh: -X)
Append a trailing `/' to all directory names resulting from
filename generation (globbing).
MENU_COMPLETE (-Y)
On an ambiguous completion, instead of listing possibilities or
beeping, insert the first match immediately. Then when comple‐
tion is requested again, remove the first match and insert the
second match, etc. When there are no more matches, go back to
the first one again. reverse-menu-complete may be used to loop
through the list in the other direction. This option overrides
AUTO_MENU.
MONITOR (-m, ksh: -m)
Allow job control. Set by default in interactive shells.
MULTIOS <Z>
Perform implicit tees or cats when multiple redirections are
attempted (see the section `Redirection').
NOMATCH (+3) <C> <Z>
If a pattern for filename generation has no matches, print an
error, instead of leaving it unchanged in the argument list.
This also applies to file expansion of an initial `~' or `='.
NOTIFY (-5, ksh: -b) <Z>
Report the status of background jobs immediately, rather than
waiting until just before printing a prompt.
NULL_GLOB (-G)
If a pattern for filename generation has no matches, delete the
pattern from the argument list instead of reporting an error.
Overrides NOMATCH.
NUMERIC_GLOB_SORT
If numeric filenames are matched by a filename generation pat‐
tern, sort the filenames numerically rather than lexicographi‐
cally.
OCTAL_ZEROES <S>
Interpret any integer constant beginning with a 0 as octal, per
IEEE Std 1003.2-1992 (ISO 9945-2:1993). This is not enabled by
default as it causes problems with parsing of, for example, date
and time strings with leading zeroes.
OVERSTRIKE
Start up the line editor in overstrike mode.
PATH_DIRS (-Q)
Perform a path search even on command names with slashes in
them. Thus if `/usr/local/bin' is in the user's path, and he or
she types `X11/xinit', the command `/usr/local/bin/X11/xinit'
will be executed (assuming it exists). Commands explicitly
beginning with `/', `./' or `../' are not subject to the path
search. This also applies to the . builtin.
Note that subdirectories of the current directory are always
searched for executables specified in this form. This takes
place before any search indicated by this option, and regardless
of whether `.' or the current directory appear in the command
search path.
POSIX_BUILTINS <K> <S>
When this option is set the command builtin can be used to exe‐
cute shell builtin commands. Parameter assignments specified
before shell functions and special builtins are kept after the
command completes unless the special builtin is prefixed with
the command builtin. Special builtins are ., :, break, con‐
tinue, declare, eval, exit, export, integer, local, readonly,
return, set, shift, source, times, trap and unset.
PRINT_EIGHT_BIT
Print eight bit characters literally in completion lists, etc.
This option is not necessary if your system correctly returns
the printability of eight bit characters (see ctype(3)).
PRINT_EXIT_VALUE (-1)
Print the exit value of programs with non-zero exit status.
PRIVILEGED (-p, ksh: -p)
Turn on privileged mode. This is enabled automatically on
startup if the effective user (group) ID is not equal to the
real user (group) ID. Turning this option off causes the effec‐
tive user and group IDs to be set to the real user and group
IDs. This option disables sourcing user startup files. If zsh
is invoked as `sh' or `ksh' with this option set, /etc/suid_pro‐
file is sourced (after /etc/profile on interactive shells).
Sourcing ~/.profile is disabled and the contents of the ENV
variable is ignored. This option cannot be changed using the -m
option of setopt and unsetopt, and changing it inside a function
always changes it globally regardless of the LOCAL_OPTIONS
option.
PROMPT_BANG <K>
If set, `!' is treated specially in prompt expansion. See the
section `Prompt Expansion'.
PROMPT_CR (+V) <D>
Print a carriage return just before printing a prompt in the
line editor. This is on by default as multi-line editing is
only possible if the editor knows where the start of the line
appears.
PROMPT_PERCENT <C> <Z>
If set, `%' is treated specially in prompt expansion. See the
section `Prompt Expansion'.
PROMPT_SUBST <K>
If set, parameter expansion, command substitution and arithmetic
expansion are performed in prompts.
PUSHD_IGNORE_DUPS
Don't push multiple copies of the same directory onto the direc‐
tory stack.
PUSHD_MINUS
Exchanges the meanings of `+' and `-' when used with a number to
specify a directory in the stack.
PUSHD_SILENT (-E)
Do not print the directory stack after pushd or popd.
PUSHD_TO_HOME (-D)
Have pushd with no arguments act like `pushd $HOME'.
RC_EXPAND_PARAM (-P)
Array expansions of the form `foo${xx}bar', where the parameter
xx is set to (a b c), are substituted with `fooabar foobbar
foocbar' instead of the default `fooa b cbar'.
RC_QUOTES
Allow the character sequence `''' to signify a single quote
within singly quoted strings. Note this does not apply in
quoted strings using the format $'...', where a backslashed sin‐
gle quote can be used.
RCS (+f) <D>
After /etc/zshenv is sourced on startup, source the .zshenv,
/etc/zprofile, .zprofile, /etc/zshrc, .zshrc, /etc/zlogin, .zlo‐
gin, and .zlogout files, as described in the section `Files'.
If this option is unset, the /etc/zshenv file is still sourced,
but any of the others will not be; it can be set at any time to
prevent the remaining startup files after the currently execut‐
ing one from being sourced.
REC_EXACT (-S)
In completion, recognize exact matches even if they are ambigu‐
ous.
RESTRICTED (-r)
Enables restricted mode. This option cannot be changed using
unsetopt, and setting it inside a function always changes it
globally regardless of the LOCAL_OPTIONS option. See the sec‐
tion `Restricted Shell'.
RM_STAR_SILENT (-H) <K> <S>
Do not query the user before executing `rm *' or `rm path/*'.
RM_STAR_WAIT
If querying the user before executing `rm *' or `rm path/*',
first wait ten seconds and ignore anything typed in that time.
This avoids the problem of reflexively answering `yes' to the
query when one didn't really mean it. The wait and query can
always be avoided by expanding the `*' in ZLE (with tab).
SHARE_HISTORY <K>
This option both imports new commands from the history file, and
also causes your typed commands to be appended to the history
file (the latter is like specifying INC_APPEND_HISTORY). The
history lines are also output with timestamps ala EXTENDED_HIS‐
TORY (which makes it easier to find the spot where we left off
reading the file after it gets re-written).
By default, history movement commands visit the imported lines
as well as the local lines, but you can toggle this on and off
with the set-local-history zle binding. It is also possible to
create a zle widget that will make some commands ignore imported
commands, and some include them.
If you find that you want more control over when commands get
imported, you may wish to turn SHARE_HISTORY off,
INC_APPEND_HISTORY on, and then manually import commands when‐
ever you need them using `fc -RI'.
SH_FILE_EXPANSION <K> <S>
Perform filename expansion (e.g., ~ expansion) before parameter
expansion, command substitution, arithmetic expansion and brace
expansion. If this option is unset, it is performed after brace
expansion, so things like `~$USERNAME' and `~{pfalstad,rc}' will
work.
SH_GLOB <K> <S>
Disables the special meaning of `(', `|', `)' and '<' for glob‐
bing the result of parameter and command substitutions, and in
some other places where the shell accepts patterns. This option
is set by default if zsh is invoked as sh or ksh.
SHIN_STDIN (-s, ksh: -s)
Commands are being read from the standard input. Commands are
read from standard input if no command is specified with -c and
no file of commands is specified. If SHIN_STDIN is set explic‐
itly on the command line, any argument that would otherwise have
been taken as a file to run will instead be treated as a normal
positional parameter. Note that setting or unsetting this
option on the command line does not necessarily affect the state
the option will have while the shell is running - that is purely
an indicator of whether on not commands are actually being read
from standard input. The value of this option cannot be changed
anywhere other than the command line.
SH_NULLCMD <K> <S>
Do not use the values of NULLCMD and READNULLCMD when doing
redirections, use `:' instead (see the section `Redirection').
SH_OPTION_LETTERS <K> <S>
If this option is set the shell tries to interpret single letter
options (which are used with set and setopt) like ksh does.
This also affects the value of the - special parameter.
SHORT_LOOPS <C> <Z>
Allow the short forms of for, select, if, and function con‐
structs.
SH_WORD_SPLIT (-y) <K> <S>
Causes field splitting to be performed on unquoted parameter
expansions. Note that this option has nothing to do with word
splitting. (See the section `Parameter Expansion'.)
SINGLE_COMMAND (-t, ksh: -t)
If the shell is reading from standard input, it exits after a
single command has been executed. This also makes the shell
non-interactive, unless the INTERACTIVE option is explicitly set
on the command line. The value of this option cannot be changed
anywhere other than the command line.
SINGLE_LINE_ZLE (-M) <K>
Use single-line command line editing instead of multi-line.
SUN_KEYBOARD_HACK (-L)
If a line ends with a backquote, and there are an odd number of
backquotes on the line, ignore the trailing backquote. This is
useful on some keyboards where the return key is too small, and
the backquote key lies annoyingly close to it.
UNSET (+u, ksh: +u) <K> <S> <Z>
Treat unset parameters as if they were empty when substituting.
Otherwise they are treated as an error.
VERBOSE (-v, ksh: -v)
Print shell input lines as they are read.
XTRACE (-x, ksh: -x)
Print commands and their arguments as they are executed.
ZLE (-Z)
Use the zsh line editor. Set by default in interactive shells
connected to a terminal.
OPTION ALIASES
Some options have alternative names. These aliases are never used for
output, but can be used just like normal option names when specifying
options to the shell.
BRACE_EXPAND
NO_IGNORE_BRACES (ksh and bash compatibility)
DOT_GLOB
GLOB_DOTS (bash compatibility)
HASH_ALL
HASH_CMDS (bash compatibility)
HIST_APPEND
APPEND_HISTORY (bash compatibility)
HIST_EXPAND
BANG_HIST (bash compatibility)
LOG NO_HIST_NO_FUNCTIONS (ksh compatibility)
MAIL_WARN
MAIL_WARNING (bash compatibility)
ONE_CMD
SINGLE_COMMAND (bash compatibility)
PHYSICAL
CHASE_LINKS (ksh and bash compatibility)
PROMPT_VARS
PROMPT_SUBST (bash compatibility)
STDIN SHIN_STDIN (ksh compatibility)
TRACK_ALL
HASH_CMDS (ksh compatibility)
SINGLE LETTER OPTIONS
Default set
-0 CORRECT
-1 PRINT_EXIT_VALUE
-2 NO_BAD_PATTERN
-3 NO_NOMATCH
-4 GLOB_DOTS
-5 NOTIFY
-6 BG_NICE
-7 IGNORE_EOF
-8 MARK_DIRS
-9 AUTO_LIST
-B NO_BEEP
-C NO_CLOBBER
-D PUSHD_TO_HOME
-E PUSHD_SILENT
-F NO_GLOB
-G NULL_GLOB
-H RM_STAR_SILENT
-I IGNORE_BRACES
-J AUTO_CD
-K NO_BANG_HIST
-L SUN_KEYBOARD_HACK
-M SINGLE_LINE_ZLE
-N AUTO_PUSHD
-O CORRECT_ALL
-P RC_EXPAND_PARAM
-Q PATH_DIRS
-R LONG_LIST_JOBS
-S REC_EXACT
-T CDABLE_VARS
-U MAIL_WARNING
-V NO_PROMPT_CR
-W AUTO_RESUME
-X LIST_TYPES
-Y MENU_COMPLETE
-Z ZLE
-a ALL_EXPORT
-e ERR_EXIT
-f NO_RCS
-g HIST_IGNORE_SPACE
-h HIST_IGNORE_DUPS
-i INTERACTIVE
-k INTERACTIVE_COMMENTS
-l LOGIN
-m MONITOR
-n NO_EXEC
-p PRIVILEGED
-r RESTRICTED
-s SHIN_STDIN
-t SINGLE_COMMAND
-u NO_UNSET
-v VERBOSE
-w CHASE_LINKS
-x XTRACE
-y SH_WORD_SPLIT
sh/ksh emulation set
-C NO_CLOBBER
-X MARK_DIRS
-a ALL_EXPORT
-b NOTIFY
-e ERR_EXIT
-f NO_GLOB
-i INTERACTIVE
-l LOGIN
-m MONITOR
-n NO_EXEC
-p PRIVILEGED
-r RESTRICTED
-s SHIN_STDIN
-t SINGLE_COMMAND
-u NO_UNSET
-v VERBOSE
-x XTRACE
Also note
-A Used by set for setting arrays
-b Used on the command line to specify end of option processing
-c Used on the command line to specify a single command
-m Used by setopt for pattern-matching option setting
-o Used in all places to allow use of long option names
-s Used by set to sort positional parameters
ZSHBUILTINS(1)ZSHBUILTINS(1)NAME
zshbuiltins - zsh built-in commands
SHELL BUILTIN COMMANDS
- simple command
See the section `Precommand Modifiers'.
. file [ arg ... ]
Read commands from file and execute them in the current shell
environment.
If file does not contain a slash, or if PATH_DIRS is set, the
shell looks in the components of $path to find the directory
containing file. Files in the current directory are not read
unless `.' appears somewhere in $path. If a file named
`file.zwc' is found, is newer than file, and is the compiled
form (created with the zcompile builtin) of file, then commands
are read from that file instead of file.
If any arguments arg are given, they become the positional
parameters; the old positional parameters are restored when the
file is done executing. The exit status is the exit status of
the last command executed.
: [ arg ... ]
This command does nothing, although normal argument expansions
is performed which may have effects on shell parameters. A zero
exit code is returned.
alias [ {+|-}gmrL ] [ name[=value] ... ]
For each name with a corresponding value, define an alias with
that value. A trailing space in value causes the next word to
be checked for alias expansion. If the -g flag is present,
define a global alias; global aliases are expanded even if they
do not occur in command position.
For each name with no value, print the value of name, if any.
With no arguments, print all currently defined aliases. If the
-m flag is given the arguments are taken as patterns (they
should be quoted to preserve them from being interpreted as glob
patterns), and the aliases matching these patterns are printed.
When printing aliases and the -g or -r flags are present, then
restrict the printing to global or regular aliases, respec‐
tively. Using `+' instead of `-', or ending the option list
with a single `+', prevents the values of the aliases from being
printed.
If the -L flag is present, then print each alias in a manner
suitable for putting in a startup script. The exit status is
nonzero if a name (with no value) is given for which no alias
has been defined.
autoload [ {+|-}UXmt ] [ -wkz ] [ name ... ]
Equivalent to functions -u, with the exception of -X/+X, -w, -k
and -z.
The flag -X may be used only inside a shell function, and may
not be followed by a name. It causes the calling function to be
marked for autoloading and then immediately loaded and executed,
with the current array of positional parameters as arguments.
This replaces the previous definition of the function. If no
function definition is found, an error is printed and the func‐
tion remains undefined and marked for autoloading.
The flag +X attempts to load each name as an autoloaded func‐
tion, but does not execute it. The exit status is zero (suc‐
cess) if the function was not previously defined and a defini‐
tion for it was found. This does not replace any existing defi‐
nition of the function. The exit status is nonzero (failure) if
the function was already defined or when no definition was
found. In the latter case the function remains undefined and
marked for autoloading.
The flag +X may be combined with either -k or -z to make the
function be loaded using ksh-style or zsh-style autoloading,
respectively. If neither is given, the current setting of the
KSH_AUTOLOAD options determines how the function is loaded. With
ksh-style autoloading, the contents of the file will not be exe‐
cuted immediately. Instead, the function created will contain
the contents of the file plus a call to the function itself
appended to it, thus given normal ksh autoloading behaviour on
the first call to the function.
With the -w flag, the names are taken as names of files compiled
with the zcompile builtin, and all functions defined in them are
marked for autoloading.
bg [ job ... ]
job ... &
Put each specified job in the background, or the current job if
none is specified.
bindkey
See the section `Zle Builtins' in zshzle(1).
break [ n ]
Exit from an enclosing for, while, until, select or repeat loop.
If n is specified, then break n levels instead of just one.
builtin name [ args ... ]
Executes the builtin name, with the given args.
bye Same as exit.
cap See the section `The zsh/cap Module' in zshmodules(1).
cd [ -sLP ] [ arg ]
cd [ -sLP ] old new
cd [ -sLP ] {+|-}n
Change the current directory. In the first form, change the
current directory to arg, or to the value of $HOME if arg is not
specified. If arg is `-', change to the value of $OLDPWD, the
previous directory. Otherwise, if a directory named arg is not
found in the current directory and arg does not begin with a
slash, search each component of the shell parameter cdpath. If
no directory is found and the option CDABLE_VARS is set, and a
parameter named arg exists whose value begins with a slash,
treat its value as the directory. In that case, the parameter
is added to the named directory hash table.
The second form of cd substitutes the string new for the string
old in the name of the current directory, and tries to change to
this new directory.
The third form of cd extracts an entry from the directory stack,
and changes to that directory. An argument of the form `+n'
identifies a stack entry by counting from the left of the list
shown by the dirs command, starting with zero. An argument of
the form `-n' counts from the right. If the PUSHD_MINUS option
is set, the meanings of `+' and `-' in this context are swapped.
If the -s option is specified, cd refuses to change the current
directory if the given pathname contains symlinks. If the -P
option is given or the CHASE_LINKS option is set, symbolic links
are resolved to their true values. If the -L option is given
symbolic links are followed regardless of the state of the
CHASE_LINKS option.
chdir Same as cd.
clone See the section `The zsh/clone Module' in zshmodules(1).
command simple command
See the section `Precommand Modifiers'.
comparguments
See the section `The zsh/computil Module' in zshmodules(1).
compcall
See the section `The zsh/compctl Module' in zshmodules(1).
compctl
See the section `The zsh/compctl Module' in zshmodules(1).
compdescribe
See the section `The zsh/computil Module' in zshmodules(1).
compfiles
See the section `The zsh/computil Module' in zshmodules(1).
compgroups
See the section `The zsh/computil Module' in zshmodules(1).
compquote
See the section `The zsh/computil Module' in zshmodules(1).
comptags
See the section `The zsh/computil Module' in zshmodules(1).
comptry
See the section `The zsh/computil Module' in zshmodules(1).
compvalues
See the section `The zsh/computil Module' in zshmodules(1).
continue [ n ]
Resume the next iteration of the enclosing for, while, until,
select or repeat loop. If n is specified, break out of n-1
loops and resume at the nth enclosing loop.
declare
Same as typeset.
dirs [ -v ] [ arg ... ]
With no arguments, print the contents of the directory stack.
If the -v option is given, number the directories in the stack
when printing. Directories are added to this stack with the
pushd command, and removed with the cd or popd commands. If
arguments are specified, load them onto the directory stack,
replacing anything that was there, and push the current direc‐
tory onto the stack.
disable [ -afmr ] name ...
Temporarily disable the named hash table elements. The default
is to disable builtin commands. This allows you to use an
external command with the same name as a builtin command. The
-a option causes disable to act on aliases. The -f option
causes disable to act on shell functions. The -r options causes
disable to act on reserved words. Without arguments all dis‐
abled hash table elements from the corresponding hash table are
printed. With the -m flag the arguments are taken as patterns
(which should be quoted to prevent them from undergoing filename
expansion), and all hash table elements from the corresponding
hash table matching these patterns are disabled. Disabled
objects can be enabled with the enable command.
disown [ job ... ]
job ... &|
job ... &!
Remove the specified jobs from the job table; the shell will no
longer report their status, and will not complain if you try to
exit an interactive shell with them running or stopped. If no
job is specified, disown the current job.
echo [ -neE ] [ arg ... ]
Write each arg on the standard output, with a space separating
each one. If the -n flag is not present, print a newline at the
end. echo recognizes the following escape sequences:
\a bell character
\b backspace
\c suppress final newline
\e escape
\f form feed
\n linefeed (newline)
\r carriage return
\t horizontal tab
\v vertical tab
\\ backslash
\0NNN character code in octal
\xNN character code in hexadecimal
The -E flag, or the BSD_ECHO option, can be used to disable
these escape sequences. In the latter case, -e flag can be used
to enable them.
echotc See the section `The zsh/termcap Module' in zshmodules(1).
echoti See the section `The zsh/terminfo Module' in zshmodules(1).
emulate [ -LR ] {zsh|sh|ksh|csh}
Set up zsh options to emulate the specified shell as much as
possible. csh will never be fully emulated. If the argument is
not one of the shells listed above, zsh will be used as a
default; more precisely, the tests performed on the argument are
the same as those used to determine the emulation at startup
based on the shell name, see the section `Compatibility' in zsh‐
misc(1) . If the -R option is given, all options are reset to
their default value corresponding to the specified emulation
mode, except for certain options describing the interactive
environment; otherwise, only those options likely to cause
portability problems in scripts and functions are altered. If
the -L option is given, the options LOCAL_OPTIONS and
LOCAL_TRAPS will be set as well, causing the effects of the emu‐
late command and any setopt and trap commands to be local to the
immediately surrounding shell function, if any; normally these
options are turned off in all emulation modes except ksh.
enable [ -afmr ] name ...
Enable the named hash table elements, presumably disabled ear‐
lier with disable. The default is to enable builtin commands.
The -a option causes enable to act on aliases. The -f option
causes enable to act on shell functions. The -r option causes
enable to act on reserved words. Without arguments all enabled
hash table elements from the corresponding hash table are
printed. With the -m flag the arguments are taken as patterns
(should be quoted) and all hash table elements from the corre‐
sponding hash table matching these patterns are enabled.
Enabled objects can be disabled with the disable builtin com‐
mand.
eval [ arg ... ]
Read the arguments as input to the shell and execute the result‐
ing command in the current shell process.
exec simple command
See the section `Precommand Modifiers'.
exit [ n ]
Exit the shell with the exit code specified by n; if none is
specified, use the exit code from the last command executed. An
EOF condition will also cause the shell to exit, unless the
IGNORE_EOF option is set.
export [ name[=value] ... ]
The specified names are marked for automatic export to the envi‐
ronment of subsequently executed commands. Equivalent to type‐
set -gx. If a parameter specified does not already exist, it is
created in the global scope.
false [ arg ... ]
Do nothing and return an exit code of 1.
fc [ -e ename ] [ -nlrdDfEim ] [ old=new ... ] [ first [ last ] ]
fc -ARWI [ filename ]
Select a range of commands from first to last from the history
list. The arguments first and last may be specified as a number
or as a string. A negative number is used as an offset to the
current history event number. A string specifies the most
recent event beginning with the given string. All substitutions
old=new, if any, are then performed on the commands.
If the -l flag is given, the resulting commands are listed on
standard output. If the -m flag is also given the first argu‐
ment is taken as a pattern (should be quoted) and only the his‐
tory events matching this pattern will be shown. Otherwise the
editor program ename is invoked on a file containing these his‐
tory events. If ename is not given, the value of the parameter
FCEDIT is used. If ename is `-', no editor is invoked. When
editing is complete, the edited command is executed.
If first is not specified, it will be set to -1 (the most recent
event), or to -16 if the -l flag is given. If last is not spec‐
ified, it will be set to first, or to -1 if the -l flag is
given.
The flag -r reverses the order of the commands and the flag -n
suppresses command numbers when listing. Also when listing, -d
prints timestamps for each command, and -f prints full time-date
stamps. Adding the -E flag causes the dates to be printed as
`dd.mm.yyyy', instead of the default `mm/dd/yyyy'. Adding the
-i flag causes the dates to be printed in ISO8601 `yyyy-mm-dd'
format. With the -D flag, fc prints elapsed times.
`fc -R' reads the history from the given file, `fc -W' writes
the history out to the given file, and `fc -A' appends the his‐
tory out to the given file. If no filename is specified, the
$HISTFILE is assumed. If the -I option is added to -R, only
those events that are not already contained within the internal
history list are added. If the -I option is added to -A or -W,
only those events that are new since last incremental
append/write to the history file are appended/written. In any
case, the created file will have no more than $SAVEHIST entries.
fg [ job ... ]
job ...
Bring each specified job in turn to the foreground. If no job
is specified, resume the current job.
float [ {+|-}EFghlrtux ] [ name[=value] ... ]
Equivalent to typeset -E, except that options irrelevant to
floating point numbers are not permitted.
functions [ {+|-}UXmtu ] [ name ... ]
Equivalent to typeset -f.
getcap See the section `The zsh/cap Module' in zshmodules(1).
getln [ -AclneE ] name ...
Read the top value from the buffer stack and put it in the shell
parameter name. Equivalent to read -zr.
getopts optstring name [ arg ... ]
Checks the args for legal options. If the args are omitted, use
the positional parameters. A valid option argument begins with
a `+' or a `-'. An argument not beginning with a `+' or a `-',
or the argument `--', ends the options. optstring contains the
letters that getopts recognizes. If a letter is followed by a
`:', that option is expected to have an argument. The options
can be separated from the argument by blanks.
Each time it is invoked, getopts places the option letter it
finds in the shell parameter name, prepended with a `+' when arg
begins with a `+'. The index of the next arg is stored in
OPTIND. The option argument, if any, is stored in OPTARG.
The first option to be examined may be changed by explicitly
assigning to OPTIND. OPTIND has an initial value of 1, and is
normally reset to 1 upon exit from a shell function. OPTARG is
not reset and retains its value from the most recent call to
getopts. If either of OPTIND or OPTARG is explicitly unset, it
remains unset, and the index or option argument is not stored.
The option itself is still stored in name in this case.
A leading `:' in optstring causes getopts to store the letter of
any invalid option in OPTARG, and to set name to `?' for an
unknown option and to `:' when a required option is missing.
Otherwise, getopts sets name to `?' and prints an error message
when an option is invalid. The exit status is nonzero when
there are no more options.
hash [ -Ldfmrv ] [ name[=value] ] ...
hash can be used to directly modify the contents of the command
hash table, and the named directory hash table. Normally one
would modify these tables by modifying one's PATH (for the com‐
mand hash table) or by creating appropriate shell parameters
(for the named directory hash table). The choice of hash table
to work on is determined by the -d option; without the option
the command hash table is used, and with the option the named
directory hash table is used.
Given no arguments, and neither the -r or -f options, the
selected hash table will be listed in full.
The -r option causes the selected hash table to be emptied. It
will be subsequently rebuilt in the normal fashion. The -f
option causes the selected hash table to be fully rebuilt imme‐
diately. For the command hash table this hashes all the abso‐
lute directories in the PATH, and for the named directory hash
table this adds all users' home directories. These two options
cannot be used with any arguments.
The -m option causes the arguments to be taken as patterns
(which should be quoted) and the elements of the hash table
matching those patterns are printed. This is the only way to
display a limited selection of hash table elements.
For each name with a corresponding value, put `name' in the
selected hash table, associating it with the pathname `value'.
In the command hash table, this means that whenever `name' is
used as a command argument, the shell will try to execute the
file given by `value'. In the named directory hash table, this
means that `value' may be referred to as `~name'.
For each name with no corresponding value, attempt to add name
to the hash table, checking what the appropriate value is in the
normal manner for that hash table. If an appropriate value
can't be found, then the hash table will be unchanged.
The -v option causes hash table entries to be listed as they are
added by explicit specification. If has no effect if used with
-f.
If the -L flag is present, then each hash table entry is printed
in the form of a call to hash.
history
Same as fc -l.
integer [ {+|-}ghilrtux ] [ name[=value] ... ]
Equivalent to typeset -i, except that options irrelevant to
integers are not permitted.
jobs [ -dlprs ] [ job ... ]
jobs -Z string
Lists information about each given job, or all jobs if job is
omitted. The -l flag lists process IDs, and the -p flag lists
process groups. If the -r flag is specified only running jobs
will be listed and if the -s flag is given only stopped jobs are
shown. If the -d flag is given, the directory from which the
job was started (which may not be the current directory of the
job) will also be shown.
The -Z option replaces the shell's argument and environment
space with the given string, truncated if necessary to fit.
This will normally be visible in ps (ps(1)) listings. This fea‐
ture is typically used by daemons, to indicate their state.
kill [ -s signal_name ] job ...
kill [ -sig ] job ...
kill -l [ sig ... ]
Sends either SIGTERM or the specified signal to the given jobs
or processes. Signals are given by number or by names, without
the `SIG' prefix. If the signal being sent is not `KILL' or
`CONT', then the job will be sent a `CONT' signal if it is
stopped. The argument job can be the process ID of a job not in
the job list. In the third form, kill -l, if sig is not speci‐
fied the signal names are listed. Otherwise, for each sig that
is a name, the corresponding signal number is listed. For each
sig that is a signal number or a number representing the exit
status of a process which was terminated or stopped by a signal
the name of the signal is printed.
let arg ...
Evaluate each arg as an arithmetic expression. See the section
`Arithmetic Evaluation' for a description of arithmetic expres‐
sions. The exit status is 0 if the value of the last expression
is nonzero, and 1 otherwise.
limit [ -hs ] [ resource [ limit ] ] ...
Set or display resource limits. Unless the -s flag is given,
the limit applies only the children of the shell. If -s is
given without other arguments, the resource limits of the cur‐
rent shell is set to the previously set resource limits of the
children.
If limit is not specified, print the current limit placed on
resource, otherwise set the limit to the specified value. If
the -h flag is given, use hard limits instead of soft limits.
If no resource is given, print all limits.
resource can be one of:
addressspace
Maximum amount of address space used.
aiomemorylocked
Maximum amount of memory locked in RAM for AIO opera‐
tions.
aiooperations
Maximum number of AIO operations.
cachedthreads
Maximum number of cached threads.
coredumpsize
Maximum size of a core dump.
cputime
Maximum CPU seconds per process.
datasize
Maximum data size (including stack) for each process.
descriptors
Maximum value for a file descriptor.
filesize
Largest single file allowed.
maxproc
Maximum number of processes.
maxpthreads
Maximum number of threads per process.
memorylocked
Maximum amount of memory locked in RAM.
memoryuse
Maximum resident set size.
resident
Maximum resident set size.
sockbufsize
Maximum size of all socket buffers.
stacksize
Maximum stack size for each process.
vmemorysize
Maximum amount of virtual memory.
Which of these resource limits are available depends on the sys‐
tem. resource can be abbreviated to any unambiguous prefix.
limit is a number, with an optional scaling factor, as follows:
nh hours
nk kilobytes (default)
nm megabytes or minutes
[mm:]ss
minutes and seconds
local [ {+|-}AEFLRUZahilrtux [n]] [ name[=value] ] ...
Same as typeset, except that the options -g, and -f are not per‐
mitted. In this case the -x option does not force the use of
-g, i.e. exported variables will be local to functions.
log List all users currently logged in who are affected by the cur‐
rent setting of the watch parameter.
logout [ n ]
Same as exit, except that it only works in a login shell.
noglob simple command
See the section `Precommand Modifiers'.
popd [ {+|-}n ]
Remove an entry from the directory stack, and perform a cd to
the new top directory. With no argument, the current top entry
is removed. An argument of the form `+n' identifies a stack
entry by counting from the left of the list shown by the dirs
command, starting with zero. An argument of the form -n counts
from the right. If the PUSHD_MINUS option is set, the meanings
of `+' and `-' in this context are swapped.
print [ -bnrslzpNDPoOicm ] [ -un ] [ -R [ -en ]] [ arg ... ]
With no flags or with flag `-', the arguments are printed on the
standard output as described by echo, with the following differ‐
ences: the escape sequence `\M-x' metafies the character x (sets
the highest bit), `\C-x' produces a control character (`\C-@'
and `\C-?' give the characters NUL and delete), and `\E' is a
synonym for `\e'. Finally, if not in an escape sequence, `\'
escapes the following character and is not printed.
-r Ignore the escape conventions of echo.
-R Emulate the BSD echo command, which does not process
escape sequences unless the -e flag is given. The -n
flag suppresses the trailing newline. Only the -e and -n
flags are recognized after -R; all other arguments and
options are printed.
-b Recognize all the escape sequences defined for the bind‐
key command, see zshzle(1).
-m Take the first argument as a pattern (should be quoted),
and remove it from the argument list together with subse‐
quent arguments that do not match this pattern.
-s Place the results in the history list instead of on the
standard output.
-n Do not add a newline to the output.
-l Print the arguments separated by newlines instead of spa‐
ces.
-N Print the arguments separated and terminated by nulls.
-o Print the arguments sorted in ascending order.
-O Print the arguments sorted in descending order.
-i If given together with -o or -O, sorting is performed
case-independently.
-c Print the arguments in columns.
-un Print the arguments to file descriptor n.
-p Print the arguments to the input of the coprocess.
-z Push the arguments onto the editing buffer stack, sepa‐
rated by spaces.
-D Treat the arguments as directory names, replacing pre‐
fixes with ~ expressions, as appropriate.
-P Perform prompt expansion (see zshmisc(1)).
pushd [ arg ]
pushd old new
pushd {+|-}n
Change the current directory, and push the old current directory
onto the directory stack. In the first form, change the current
directory to arg. If arg is not specified, change to the second
directory on the stack (that is, exchange the top two entries),
or change to $HOME if the PUSHD_TO_HOME option is set or if
there is only one entry on the stack. Otherwise, arg is inter‐
preted as it would be by cd. The meaning of old and new in the
second form is also the same as for cd.
The third form of pushd changes directory by rotating the direc‐
tory list. An argument of the form `+n' identifies a stack
entry by counting from the left of the list shown by the dirs
command, starting with zero. An argument of the form `-n'
counts from the right. If the PUSHD_MINUS option is set, the
meanings of `+' and `-' in this context are swapped.
If the option PUSHD_SILENT is not set, the directory stack will
be printed after a pushd is performed.
pushln [ arg ... ]
Equivalent to print -nz.
pwd [ -rLP ]
Print the absolute pathname of the current working directory.
If the -r or the -P flag is specified, or the CHASE_LINKS option
is set and the -L flag is not given, the printed path will not
contain symbolic links.
r Same as fc -e -.
read [ -rzpqAclneEt ] [ -k [ num ] ]
[ -un ] [ name[?prompt] ] [ name ... ]
Read one line and break it into fields using the characters in
$IFS as separators, except as noted below. The first field is
assigned to the first name, the second field to the second name,
etc., with leftover fields assigned to the last name. If name
is omitted then REPLY is used for scalars and reply for arrays.
-r Raw mode: a `\' at the end of a line does not signify
line continuation and backslashes in the line don't quote
the following character and are not removed.
-q Read only one character from the terminal and set name to
`y' if this character was `y' or `Y' and to `n' other‐
wise. With this flag set the return value is zero only
if the character was `y' or `Y'. Note that this always
reads from the terminal, even if used with the -p or -u
or -z flags or with redirected input. This option may
also be used within zle widgets.
-k [ num ]
Read only one (or num) characters. All are assigned to
the first name, without word splitting. This flag is
ignored when -q is present. Input is read from the ter‐
minal unless one of -u or -p is present. This option may
also be used within zle widgets.
Note that num must be in the argument word that follows
-k, not in the same word. See -u.
-z Read one entry from the editor buffer stack and assign it
to the first name, without word splitting. Text is
pushed onto the stack with `print -z' or with push-line
from the line editor (see zshzle(1)). This flag is
ignored when the -k or -q flags are present.
-e
-E The input read is printed (echoed) to the standard out‐
put. If the -e flag is used, no input is assigned to the
parameters.
-A The first name is taken as the name of an array and all
words are assigned to it.
-c
-l These flags are allowed only if called inside a function
used for completion (specified with the -K flag to com‐
pctl). If the -c flag is given, the words of the current
command are read. If the -l flag is given, the whole line
is assigned as a scalar. If both flags are present, -l
is used and -c is ignored.
-n Together with -c, the number of the word the cursor is on
is read. With -l, the index of the character the cursor
is on is read. Note that the command name is word number
1, not word 0, and that when the cursor is at the end of
the line, its character index is the length of the line
plus one.
-un Input is read from file descriptor n, where n is a single
digit and must not be separated from -u by any white‐
space.
-p Input is read from the coprocess.
-t Test if input is available before attempting to read; if
none is, return status 1 and do not set any variables.
This is not available when reading from the editor buffer
with -z, when called from within completion with -c or
-l, with -q which clears the input queue before reading,
or within zle where other mechanisms should be used to
test for input.
Note that read does not attempt to alter the input pro‐
cessing mode. The default mode is canonical input, in
which an entire line is read at a time, so usually `read
-t' will not read anything until an entire line has been
typed. However, when reading from the terminal with -k
this is automatically handled; note that only availabil‐
ity of the first character is tested, so that e.g. `read
-t -k 2' can still block on the second character. If the
first argument contains a `?', the remainder of this word
is used as a prompt on standard error when the shell is
interactive.
The value (exit status) of read is 1 when an end-of-file is
encountered, or when -c or -l is present and the command is not
called from a compctl function, or as described for -q. Other‐
wise the value is 0.
The behavior of some combinations of the -k, -p, -q, -u and -z
flags is undefined. Presently -q cancels all the others, -p
cancels -u, -k cancels -z, and otherwise -z cancels both -p and
-u.
The -c or -l flags cancel any and all of -kpquz.
readonly
Same as typeset -r.
rehash Same as hash -r.
return [ n ]
Causes a shell function or . script to return to the invoking
script with the return status specified by n. If n is omitted,
the return status is that of the last command executed.
If return was executed from a trap in a TRAPNAL function, the
effect is different for zero and non-zero return status. With
zero status (or after an implicit return at the end of the
trap), the shell will return to whatever it was previously pro‐
cessing; with a non-zero status, the shell will behave as inter‐
rupted except that the return status of the trap is retained.
Note that the numeric value of the signal which caused the trap
is passed as the first argument, so the statement `return
$((128+$1))' will return the same status as if the signal had
not been trapped.
sched See the section `The zsh/sched Module' in zshmodules(1).
set [ {+|-}options | {+|-}o option_name ] ... [ {+|-}A [ name ] ] [ arg
... ]
Set the options for the shell and/or set the positional parame‐
ters, or declare and set an array. If the -s option is given,
it causes the specified arguments to be sorted before assigning
them to the positional parameters (or to the array name if -A is
used). With +s sort arguments in descending order. For the
meaning of the other flags, see zshoptions(1). Flags may be
specified by name using the -o option.
If the -A flag is specified, name is set to an array containing
the given args. if +A is used and name is an array, the given
arguments will replace the initial elements of that array; if no
name is specified, all arrays are printed. Otherwise the posi‐
tional parameters are set. If no arguments are given, then the
names and values of all parameters are printed on the standard
output. If the only argument is `+', the names of all parame‐
ters are printed.
setcap See the section `The zsh/cap Module' in zshmodules(1).
setopt [ {+|-}options | {+|-}o option_name ] [ name ... ]
Set the options for the shell. All options specified either
with flags or by name are set. If no arguments are supplied,
the names of all options currently set are printed. If the -m
flag is given the arguments are taken as patterns (which should
be quoted to protect them from filename expansion), and all
options with names matching these patterns are set.
shift [ n ] [ name ... ]
The positional parameters ${n+1} ... are renamed to $1 ...,
where n is an arithmetic expression that defaults to 1. If any
names are given then the arrays with these names are shifted
instead of the positional parameters.
source file [ arg ... ]
Same as ., except that the current directory is always searched
and is always searched first, before directories in $path.
stat See the section `The zsh/stat Module' in zshmodules(1).
suspend [ -f ]
Suspend the execution of the shell (send it a SIGTSTP) until it
receives a SIGCONT. Unless the -f option is given, this will
refuse to suspend a login shell.
test [ arg ... ]
[ [ arg ... ] ]
Like the system version of test. Added for compatibility; use
conditional expressions instead (see the section `Conditional
Expressions').
times Print the accumulated user and system times for the shell and
for processes run from the shell.
trap [ arg [ sig ... ] ]
arg is a series of commands (usually quoted to protect it from
immediate evaluation by the shell) to be read and executed when
the shell receives sig. Each sig can be given as a number or as
the name of a signal. If arg is `-', then all traps sig are
reset to their default values. If arg is the empty string, then
this signal is ignored by the shell and by the commands it
invokes.
If sig is ZERR then arg will be executed after each command with
a nonzero exit status. If sig is DEBUG then arg will be exe‐
cuted after each command. If sig is 0 or EXIT and the trap
statement is executed inside the body of a function, then the
command arg is executed after the function completes. If sig is
0 or EXIT and the trap statement is not executed inside the body
of a function, then the command arg is executed when the shell
terminates.
The trap command with no arguments prints a list of commands
associated with each signal.
Note that traps defined with the trap builtin are slightly dif‐
ferent from those defined as `TRAPNAL () { ... }', as the latter
have their own function environment (line numbers, local vari‐
ables, etc.) while the former use the environment of the command
in which they were called. For example,
trap 'print $LINENO' DEBUG
will print the line number of a command executed after it has
run, while
TRAPDEBUG() { print $LINENO; }
will always print the number zero.
true [ arg ... ]
Do nothing and return an exit code of 0.
ttyctl -fu
The -f option freezes the tty, and -u unfreezes it. When the
tty is frozen, no changes made to the tty settings by external
programs will be honored by the shell, except for changes in the
size of the screen; the shell will simply reset the settings to
their previous values as soon as each command exits or is sus‐
pended. Thus, stty and similar programs have no effect when the
tty is frozen. Without options it reports whether the terminal
is frozen or not.
type [ -wfpams ] name ...
Equivalent to whence -v.
typeset [ {+|-}AEFLRUZafghilrtuxm [n]] [ name[=value] ... ]
typeset -T [ {+|-}LRUZrux ] SCALAR[=value] array
Set or display attributes and values for shell parameters.
A parameter is created for each name that does not already refer
to one. When inside a function, a new parameter is created for
every name (even those that already exist), and is unset again
when the function completes. See `Local Parameters' in zsh‐
param(1). The same rules apply to special shell parameters,
which retain their special attributes when made local.
For each name=value assignment, the parameter name is set to
value. Note that arrays currently cannot be assigned in typeset
expressions, only scalars and integers.
For each remaining name that refers to a parameter that is set,
the name and value of the parameter are printed in the form of
an assignment. Nothing is printed for newly-created parameters,
or when any attribute flags listed below are given along with
the name. Using `+' instead of minus to introduce an attribute
turns it off.
If the -T option is given, exactly two (or zero) name arguments
must be present. They represent a scalar and an array (in that
order) that will be tied together in the manner of $PATH and
$path. In other words, an array present in the latter variable
appears as a scalar with the elements of the array joined by
colons in the former. Only the scalar may have an initial
value. Both the scalar and the array may otherwise be manipu‐
lated as normal. If one is unset, the other will automatically
be unset too. There is no way of untying the variables without
unsetting them, or converting the type of one of them with
another typeset command; +T does not work, assigning an array to
SCALAR is an error, and assigning a scalar to array sets it to
be a single-element array. Note that both `typeset -xT ...' and
`export -T ...' work, but only the scalar will be marked for
export.
The -g (global) flag is treated specially: it means that any
resulting parameter will not be restricted to local scope. Note
that this does not necessarily mean that the parameter will be
global, as the flag will apply to any existing parameter (even
if unset) from an enclosing function. This flag does not affect
the parameter after creation, hence it has no effect when list‐
ing existing parameters, nor does the flag +g have any effect
except in combination with -m (see below).
If no name is present, the names and values of all parameters
are printed. In this case the attribute flags restrict the dis‐
play to only those parameters that have the specified
attributes, and using `+' rather than `-' to introduce the flag
suppresses printing of the values of parameters when there is no
parameter name. Also, if the last option is the word `+', then
names are printed but values are not.
If the -m flag is given the name arguments are taken as patterns
(which should be quoted). With no attribute flags, all parame‐
ters (or functions with the -f flag) with matching names are
printed. Note that -m is ignored if no patterns are given. If
the +g flag is combined with -m, a new local parameter is cre‐
ated for every matching parameter that is not already local.
Otherwise -m applies all other flags or assignments to the
existing parameters. Except when assignments are made with
name=value, using +m forces the matching parameters to be
printed, even inside a function.
If no attribute flags are given and either no -m flag is present
or the +m form was used, each parameter name printed is preceded
by a list of the attributes of that parameter (array, associa‐
tion, exported, integer, readonly). If +m is used with
attribute flags, and all those flags are introduced with +, the
matching parameter names are printed but their values are not.
The following attribute flags may be specified:
-A The names refer to associative array parameters; see
`Array Parameters' in zshparam(1).
-L Left justify and remove leading blanks from value. If n
is nonzero, it defines the width of the field; otherwise
it is determined by the width of the value of the first
assignment. When the parameter is expanded, it is filled
on the right with blanks or truncated if necessary to fit
the field. Leading zeros are removed if the -Z flag is
also set.
-R Right justify and fill with leading blanks. If n is
nonzero if defines the width of the field; otherwise it
is determined by the width of the value of the first
assignment. When the parameter is expanded, the field is
left filled with blanks or truncated from the end.
-U For arrays (but not for associative arrays), keep only
the first occurrence of each duplicated value. This may
also be set for colon-separated special parameters like
PATH or FIGNORE, etc. This flag has a different meaning
when used with -f; see below.
-Z Right justify and fill with leading zeros if the first
non-blank character is a digit and the -L flag has not
been set. If n is nonzero it defines the width of the
field; otherwise it is determined by the width of the
value of the first assignment.
-a The names refer to array parameters. An array parameter
may be created this way, but it may not be assigned to in
the typeset statement. When displaying, both normal and
associative arrays are shown.
-f The names refer to functions rather than parameters. No
assignments can be made, and the only other valid flags
are -t, -u and -U. The flag -t turns on execution trac‐
ing for this function. The -u and -U flags cause the
function to be marked for autoloading; -U also causes
alias expansion to be suppressed when the function is
loaded. The fpath parameter will be searched to find the
function definition when the function is first refer‐
enced; see the section `Functions'.
-h Hide: only useful for special parameters (those marked
`<S>' in the table in zshparams(1)), and for local param‐
eters with the same name as a special parameter, though
harmless for others. A special parameter with this
attribute will not retain its special effect when made
local. Thus after `typeset -h PATH', a function contain‐
ing `typeset PATH' will create an ordinary local parame‐
ter without the usual behaviour of PATH. Alternatively,
the local parameter may itself be given this attribute;
hence inside a function `typeset -h PATH' creates an
ordinary local parameter and the special PATH parameter
is not altered in any way. It is also possible to create
a local parameter using `typeset +h special', where the
local copy of special will retain its special properties
regardless of having the -h attribute. Global special
parameters loaded from shell modules (currently those in
zsh/mapfile and zsh/parameter) are automatically given
the -h attribute to avoid name clashes.
-H Hide value: specifies that typeset will not display the
value of the parameter when listing parameters; the dis‐
play for such parameters is always as if the `+' flag had
been given. Use of the parameter is in other respects
normal, and the option does not apply if the parameter is
specified by name, or by pattern with the -m option.
This is on by default for the parameters in the
zsh/parameter and zsh/mapfile modules. Note, however,
that unlike the -h flag this is also useful for non-spe‐
cial parameters.
-i Use an internal integer representation. If n is nonzero
it defines the output arithmetic base, otherwise it is
determined by the first assignment.
-E Use an internal double-precision floating point represen‐
tation. On output the variable will be converted to sci‐
entific notation. If n is nonzero it defines the number
of significant figures to display; the default is ten.
-F Use an internal double-precision floating point represen‐
tation. On output the variable will be converted to
fixed-point decimal notation. If n is nonzero it defines
the number of digits to display after the decimal point;
the default is ten.
-l Convert the result to lower case whenever the parameter
is expanded. The value is not converted when assigned.
-r The given names are marked readonly.
-t Tags the named parameters. Tags have no special meaning
to the shell. This flag has a different meaning when
used with -f; see above.
-u Convert the result to upper case whenever the parameter
is expanded. The value is not converted when assigned.
This flag has a different meaning when used with -f; see
above.
-x Mark for automatic export to the environment of subse‐
quently executed commands. If the option GLOBAL_EXPORT
is set, this implies the option -g, unless +g is also
explicitly given; in other words the parameter is not
made local to the enclosing function. This is for com‐
patibility with previous versions of zsh.
ulimit [ -SHacdflmnpstv [ limit ] ... ]
Set or display resource limits of the shell and the processes
started by the shell. The value of limit can be a number in the
unit specified below or the value `unlimited'. If the -H flag
is given use hard limits instead of soft limits. If the -S flag
is given together with the -H flag set both hard and soft lim‐
its. If no options are used, the file size limit (-f) is
assumed. If limit is omitted the current value of the specified
resources are printed. When more than one resource values are
printed the limit name and unit is printed before each value.
-a Lists all of the current resource limits.
-c 512-byte blocks on the size of core dumps.
-d K-bytes on the size of the data segment.
-f 512-byte blocks on the size of files written.
-l K-bytes on the size of locked-in memory.
-m K-bytes on the size of physical memory.
-n open file descriptors.
-s K-bytes on the size of the stack.
-t CPU seconds to be used.
-u processes available to the user.
-v K-bytes on the size of virtual memory.
umask [ -S ] [ mask ]
The umask is set to mask. mask can be either an octal number or
a symbolic value as described in chmod(1). If mask is omitted,
the current value is printed. The -S option causes the mask to
be printed as a symbolic value. Otherwise, the mask is printed
as an octal number. Note that in the symbolic form the permis‐
sions you specify are those which are to be allowed (not denied)
to the users specified.
unalias
Same as unhash -a.
unfunction
Same as unhash -f.
unhash [ -adfm ] name ...
Remove the element named name from an internal hash table. The
default is remove elements from the command hash table. The -a
option causes unhash to remove aliases. The -f option causes
unhash to remove shell functions. The -d options causes unhash
to remove named directories. If the -m flag is given the argu‐
ments are taken as patterns (should be quoted) and all elements
of the corresponding hash table with matching names will be
removed.
unlimit [ -hs ] resource ...
The resource limit for each resource is set to the hard limit.
If the -h flag is given and the shell has appropriate privi‐
leges, the hard resource limit for each resource is removed.
The resources of the shell process are only changed if the -s
flag is given.
unset [ -fm ] name ...
Each named parameter is unset. Local parameters remain local
even if unset; they appear unset within scope, but the previous
value will still reappear when the scope ends.
Individual elements of associative array parameters may be unset
by using subscript syntax on name, which should be quoted (or
the entire command prefixed with noglob) to protect the sub‐
script from filename generation.
If the -m flag is specified the arguments are taken as patterns
(should be quoted) and all parameters with matching names are
unset. Note that this cannot be used when unsetting associative
array elements, as the subscript will be treated as part of the
pattern.
unset -f is equivalent to unfunction.
unsetopt [ {+|-}options | {+|-}o option_name ] [ name ... ]
Unset the options for the shell. All options specified either
with flags or by name are unset. If no arguments are supplied,
the names of all options currently unset are printed. If the -m
flag is given the arguments are taken as patterns (which should
be quoted to preserve them from being interpreted as glob pat‐
terns), and all options with names matching these patterns are
unset.
vared See the section `Zle Builtins' in zshzle(1).
wait [ job ... ]
Wait for the specified jobs or processes. If job is not given
then all currently active child processes are waited for. Each
job can be either a job specification or the process ID of a job
in the job table. The exit status from this command is that of
the job waited for.
whence [ -vcwfpams ] name ...
For each name, indicate how it would be interpreted if used as a
command name.
-v Produce a more verbose report.
-c Print the results in a csh-like format. This takes
precedence over -v.
-w For each name, print `name: word' where word is one of
alias, builtin, command, function, hashed, reserved or
none, according as name corresponds to an alias, a
built-in command, an external command, a shell function,
a command defined with the hash builtin, a reserved word,
or is not recognised. This takes precedence over -v and
-c.
-f Causes the contents of a shell function to be displayed,
which would otherwise not happen unless the -c flag were
used.
-p Do a path search for name even if it is an alias,
reserved word, shell function or builtin.
-a Do a search for all occurrences of name throughout the
command path. Normally only the first occurrence is
printed.
-m The arguments are taken as patterns (should be quoted),
and the information is displayed for each command match‐
ing one of these patterns.
-s If a pathname contains symlinks, print the symlink-free
pathname as well.
where [ -wpms ] name ...
Equivalent to whence -ca.
which [ -wpams ] name ...
Equivalent to whence -c.
zcompile [ -U ] [ -z | -k ] [ -R | -M ] file [ name ... ]
zcompile -ca [ -m ] [ -R | -M ] file [ name ... ]
zcompile -t file [ name ... ]
This builtin command can be used to compile functions or
scripts, storing the compiled form in a file, and to examine
files containing the compiled form. This allows faster
autoloading of functions and execution of scripts by avoiding
parsing of the text when the files are read.
The first form (without the -c, -a or -t options) creates a com‐
piled file. If only the file argument is given, the output file
has the name `file.zwc' and will be placed in the same directory
as the file. The shell will load the compiled file instead of
the normal function file when the function is autoloaded; see
the section `Autoloading Functions' in zshfunc(1) for a descrip‐
tion of how autoloaded functions are searched. The extension
.zwc stands for `zsh word code'.
If there is at least one name argument, all the named files are
compiled into the output file given as the first argument. If
file does not end in .zwc, this extension is automatically
appended. Files containing multiple compiled functions are
called `digest' files, and are intended to be used as elements
of the FPATH/fpath special array.
The second form, with the -c or -a options, writes the compiled
definitions for all the named functions into file. For -c, the
names must be functions currently defined in the shell, not
those marked for autoloading. Undefined functions that are
marked for autoloading may be written by using the -a option, in
which case the fpath is searched and the contents of the defini‐
tion files for those functions, if found, are compiled into
file. If both -c and -a are given, names of both defined func‐
tions and functions marked for autoloading may be given. In
either case, the functions in files written with the -c or -a
option will be autoloaded as if the KSH_AUTOLOAD option were
unset.
The reason for handling loaded and not-yet-loaded functions with
different options is that some definition files for autoloading
define multiple functions, including the function with the same
name as the file, and, at the end, call that function. In such
cases the output of `zcompile -c' does not include the addi‐
tional functions defined in the file, and any other initializa‐
tion code in the file is lost. Using `zcompile -a' captures all
this extra information.
If the -m option is combined with -c or -a, the names are used
as patterns and all functions whose names match one of these
patterns will be written. If no name is given, the definitions
of all functions currently defined or marked as autoloaded will
be written.
The third form, with the -t option, examines an existing com‐
piled file. Without further arguments, the names of the origi‐
nal files compiled into it are listed. The first line of output
shows the version of the shell which compiled the file and how
the file will be used (i.e. by reading it directly or by mapping
it into memory). With arguments, nothing is output and the
return value is set to zero if definitions for all names were
found in the compiled file, and non-zero if the definition for
at least one name was not found.
Other options:
-U Aliases are not expanded when compiling the named files.
-R When the compiled file is read, its contents are copied
into the shell's memory, rather than memory-mapped (see
-M). This happens automatically on systems that do not
support memory mapping.
When compiling scripts instead of autoloadable functions,
it is often desirable to use this option; otherwise the
whole file, including the code to define functions which
have already been defined, will remain mapped, conse‐
quently wasting memory.
-M The compiled file is mapped into the shell's memory when
read. This is done in such a way that multiple instances
of the shell running on the same host will share this
mapped file. If neither -R nor -M is given, the zcompile
builtin decides what to do based on the size of the com‐
piled file.
-k
-z These options are used when the compiled file contains
functions which are to be autoloaded. If -z is given, the
function will be autoloaded as if the KSH_AUTOLOAD option
is not set, even if it is set at the time the compiled
file is read, while if the -k is given, the function will
be loaded as if KSH_AUTOLOAD is set. If neither of these
options is given, the function will be loaded as deter‐
mined by the setting of the KSH_AUTOLOAD option at the
time the compiled file is read.
These options may also appear as many times as necessary
between the listed names to specify the loading style of
all following functions, up to the next -k or -z.
The created file always contains two versions of the com‐
piled format, one for big-endian machines and one for
small-endian machines. The upshot of this is that the
compiled file is machine independent and if it is read or
mapped, only one half of the file is actually used (and
mapped).
zformat
See the section `The zsh/zutil Module' in zshmodules(1).
zftp See the section `The zsh/zftp Module' in zshmodules(1).
zle See the section `Zle Builtins' in zshzle(1).
zmodload [ -dL ] [ ... ]
zmodload -e [ -A ] [ ... ]
zmodload [ -a [ -bcpf [ -I ] ] ] [ -iL ] ...
zmodload -u [ -abcdpf [ -I ] ] [ -iL ] ...
zmodload -A [ -L ] [ modalias[=module] ... ]
zmodload -R modalias ...
Performs operations relating to zsh's loadable modules. Loading
of modules while the shell is running (`dynamical loading') is
not available on all operating systems, or on all installations
on a particular operating system, although the zmodload command
itself is always available and can be used to manipulate modules
built into versions of the shell executable without dynamical
loading.
Without arguments the names of all currently loaded binary mod‐
ules are printed. The -L option causes this list to be in the
form of a series of zmodload commands. Forms with arguments
are:
zmodload [ -i ] name ...
zmodload -u [ -i ] name ...
In the simplest case, zmodload loads a binary module.
The module must be in a file with a name consisting of
the specified name followed by a standard suffix, usually
`.so' (`.sl' on HPUX). If the module to be loaded is
already loaded and the -i option is given, the duplicate
module is ignored. Otherwise zmodload prints an error
message.
The named module is searched for in the same way a com‐
mand is, using $module_path instead of $path. However,
the path search is performed even when the module name
contains a `/', which it usually does. There is no way
to prevent the path search.
With -u, zmodload unloads modules. The same name must be
given that was given when the module was loaded, but it
is not necessary for the module to exist in the filesys‐
tem. The -i option suppresses the error if the module is
already unloaded (or was never loaded).
Each module has a boot and a cleanup function. The mod‐
ule will not be loaded if its boot function fails. Simi‐
larly a module can only be unloaded if its cleanup func‐
tion runs successfully.
zmodload -d [ -L ] [ name ]
zmodload -d name dep ...
zmodload -ud name [ dep ... ]
The -d option can be used to specify module dependencies.
The modules named in the second and subsequent arguments
will be loaded before the module named in the first argu‐
ment.
With -d and one argument, all dependencies for that mod‐
ule are listed. With -d and no arguments, all module
dependencies are listed. This listing is by default in a
Makefile-like format. The -L option changes this format
to a list of zmodload -d commands.
If -d and -u are both used, dependencies are removed. If
only one argument is given, all dependencies for that
module are removed.
zmodload -ab [ -L ]
zmodload -ab [ -i ] name [ builtin ... ]
zmodload -ub [ -i ] builtin ...
The -ab option defines autoloaded builtins. It defines
the specified builtins. When any of those builtins is
called, the module specified in the first argument is
loaded. If only the name is given, one builtin is
defined, with the same name as the module. -i suppresses
the error if the builtin is already defined or
autoloaded, regardless of which module it came from.
With -ab and no arguments, all autoloaded builtins are
listed, with the module name (if different) shown in
parentheses after the builtin name. The -L option
changes this format to a list of zmodload -a commands.
If -b is used together with the -u option, it removes
builtins previously defined with -ab. This is only pos‐
sible if the builtin is not yet loaded. -i suppresses
the error if the builtin is already removed (or never
existed).
zmodload -ac [ -IL ]
zmodload -ac [ -iI ] name [ cond ... ]
zmodload -uc [ -iI ] cond ...
The -ac option is used to define autoloaded condition
codes. The cond strings give the names of the conditions
defined by the module. The optional -I option is used to
define infix condition names. Without this option prefix
condition names are defined.
If given no condition names, all defined names are listed
(as a series of zmodload commands if the -L option is
given).
The -uc option removes definitions for autoloaded condi‐
tions.
zmodload -ap [ -L ]
zmodload -ap [ -i ] name [ parameter ... ]
zmodload -up [ -i ] parameter ...
The -p option is like the -b and -c options, but makes
zmodload work on autoloaded parameters instead.
zmodload -af [ -L ]
zmodload -af [ -i ] name [ function ... ]
zmodload -uf [ -i ] function ...
The -f option is like the -b, -p, and -c options, but
makes zmodload work on autoloaded math functions instead.
zmodload -a [ -L ]
zmodload -a [ -i ] name [ builtin ... ]
zmodload -ua [ -i ] builtin ...
Equivalent to -ab and -ub.
zmodload -e [ -A ] [ string ... ]
The -e option without arguments lists all loaded modules;
if the -A option is also given, module aliases corre‐
sponding to loaded modules are also shown. With argu‐
ments only the return status is set to zero if all
strings given as arguments are names of loaded modules
and to one if at least on string is not the name of a
loaded module. This can be used to test for the avail‐
ability of things implemented by modules. In this case,
any aliases are automatically resolved and the -A flag is
not used.
zmodload -A [ -L ] [ modalias[=module] ... ]
For each argument, if both modalias and module are given,
define modalias to be an alias for the module module. If
the module modalias is ever subsequently requested,
either via a call to zmodload or implicitly, the shell
will attempt to load module instead. If module is not
given, show the definition of modalias. If no arguments
are given, list all defined module aliases. When list‐
ing, if the -L flag was also given, list the definition
as a zmodload command to recreate the alias.
The existence of aliases for modules is completely inde‐
pendent of whether the name resolved is actually loaded
as a module: while the alias exists, loading and unload‐
ing the module under any alias has exactly the same
effect as using the resolved name, and does not affect
the connection between the alias and the resolved name
which can be removed either by zmodload -R or by redefin‐
ing the alias. Chains of aliases (i.e. where the first
resolved name is itself an alias) are valid so long as
these are not circular. As the aliases take the same
format as module names, they may include path separators:
in this case, there is no requirement for any part of the
path named to exist as the alias will be resolved first.
For example, `any/old/alias' is always a valid alias.
Dependencies added to aliased modules are actually added
to the resolved module; these remain if the alias is
removed. It is valid to create an alias whose name is
one of the standard shell modules and which resolves to a
different module. However, if a module has dependencies,
it will not be possible to use the module name as an
alias as the module will already be marked as a loadable
module in its own right.
Apart from the above, aliases can be used in the zmodload
command anywhere module names are required. However,
aliases will not be shown in lists of loaded modules with
a bare `zmodload'.
zmodload -R modalias ...
For each modalias argument that was previously defined as
a module alias via zmodload -A, delete the alias. If any
was not defined, an error is caused and the remainder of
the line is ignored.
Note that zsh makes no distinction between modules that were
linked into the shell and modules that are loaded dynamically.
In both cases this builtin command has to be used to make avail‐
able the builtins and other things defined by modules (unless
the module is autoloaded on these definitions). This is true
even for systems that don't support dynamic loading of modules.
zparseopts
See the section `The zsh/zutil Module' in zshmodules(1).
zprof See the section `The zsh/zprof Module' in zshmodules(1).
zpty See the section `The zsh/zpty Module' in zshmodules(1).
zregexparse
See the section `The zsh/zutil Module' in zshmodules(1).
zstyle See the section `The zsh/zutil Module' in zshmodules(1).
ZSHZLE(1)ZSHZLE(1)NAME
zshzle - zsh command line editor
DESCRIPTION
If the ZLE option is set (which it is by default in interactive shells)
and the shell input is attached to the terminal, the user is able to
edit command lines.
There are two display modes. The first, multiline mode, is the
default. It only works if the TERM parameter is set to a valid termi‐
nal type that can move the cursor up. The second, single line mode, is
used if TERM is invalid or incapable of moving the cursor up, or if the
SINGLE_LINE_ZLE option is set. This mode is similar to ksh, and uses
no termcap sequences. If TERM is "emacs", the ZLE option will be unset
by default.
The parameters BAUD, COLUMNS, and LINES are also used by the line edi‐
tor. See Parameters Used By The Shell in zshparam(1).
KEYMAPS
A keymap in ZLE contains a set of bindings between key sequences and
ZLE commands. The empty key sequence cannot be bound.
There can be any number of keymaps at any time, and each keymap has one
or more names. If all of a keymap's names are deleted, it disappears.
bindkey can be used to manipulate keymap names.
Initially, there are four keymaps:
emacs EMACS emulation
viins vi emulation - insert mode
vicmd vi emulation - command mode
.safe fallback keymap
The `.safe' keymap is special. It can never be altered, and the name
can never be removed. However, it can be linked to other names, which
can be removed. In the future other special keymaps may be added;
users should avoid using names beginning with `.' for their own
keymaps.
In addition to these four names, either `emacs' or `viins' is also
linked to the name `main'. If one of the VISUAL or EDITOR environment
variables contain the string `vi' when the shell starts up then it will
be `viins', otherwise it will be `emacs'. bindkey's -e and -v options
provide a convenient way to override this default choice.
When the editor starts up, it will select the `main' keymap. If that
keymap doesn't exist, it will use `.safe' instead.
In the `.safe' keymap, each single key is bound to self-insert, except
for ^J (line feed) and ^M (return) which are bound to accept-line.
This is deliberately not pleasant to use; if you are using it, it means
you deleted the main keymap, and you should put it back.
Reading Commands
When ZLE is reading a command from the terminal, it may read a sequence
that is bound to some command and is also a prefix of a longer bound
string. In this case ZLE will wait a certain time to see if more char‐
acters are typed, and if not (or they don't match any longer string) it
will execute the binding. This timeout is defined by the KEYTIMEOUT
parameter; its default is 0.4 sec. There is no timeout if the prefix
string is not itself bound to a command.
As well as ZLE commands, key sequences can be bound to other strings,
by using `bindkey -s'. When such a sequence is read, the replacement
string is pushed back as input, and the command reading process starts
again using these fake keystrokes. This input can itself invoke fur‐
ther replacement strings, but in order to detect loops the process will
be stopped if there are twenty such replacements without a real command
being read.
ZLE BUILTINS
The ZLE module contains three related builtin commands. The bindkey
command manipulates keymaps and key bindings; the vared command invokes
ZLE on the value of a shell parameter; and the zle command manipulates
editing widgets and allows command line access to ZLE commands from
within shell functions.
bindkey [ options ] -l
bindkey [ options ] -d
bindkey [ options ] -D keymap ...
bindkey [ options ] -A old-keymap new-keymap
bindkey [ options ] -N new-keymap [ old-keymap ]
bindkey [ options ] -m
bindkey [ options ] -r in-string ...
bindkey [ options ] -s in-string out-string ...
bindkey [ options ] in-string command ...
bindkey [ options ] [ in-string ]
bindkey's options can be divided into three categories: keymap
selection, operation selection, and others. The keymap selec‐
tion options are:
-e Selects keymap `emacs', and also links it to `main'.
-v Selects keymap `viins', and also links it to `main'.
-a Selects keymap `vicmd'.
-M The first non-option argument is used as a keymap name,
and does not otherwise count as an argument.
If a keymap selection is required and none of the options above
are used, the `main' keymap is used. Some operations do not
permit a keymap to be selected, namely:
-l List all existing keymap names. If the -L option is also
used, list in the form of bindkey commands to create the
keymaps.
-d Delete all existing keymaps and reset to the default
state.
-D keymap ...
Delete the named keymaps.
-A old-keymap new-keymap
Make the new-keymap name an alias for old-keymap, so that
both names refer to the same keymap. The names have
equal standing; if either is deleted, the other remains.
If there is already a keymap with the new-keymap name, it
is deleted.
-N new-keymap [ old-keymap ]
Create a new keymap, named new-keymap. If a keymap
already has that name, it is deleted. If an old-keymap
name is given, the new keymap is initialized to be a
duplicate of it, otherwise the new keymap will be empty.
To use a newly created keymap, it should be linked to main.
Hence the sequence of commands to create and use a new keymap
`mymap' initialized from the emacs keymap (which remains
unchanged) is:
bindkey -N mymap emacs
bindkey -A mymap main
Note that while `bindkey -A newmap main' will work when newmap
is emacs or viins, it will not work for vicmd, as switching from
vi insert to command mode becomes impossible.
The following operations act on the `main' keymap if no keymap
selection option was given:
-m Add the built-in set of meta-key bindings to the selected
keymap. Only keys that are unbound or bound to
self-insert are affected.
-r in-string ...
Unbind the specified in-strings in the selected keymap.
This is exactly equivalent to binding the strings to
undefined-key.
When -R is also used, interpret the in-strings as ranges.
When -p is also used, the in-strings specify prefixes.
Any binding that has the given in-string as a prefix, not
including the binding for the in-string itself, if any,
will be removed. For example,
bindkey -rpM viins '^['
will remove all bindings in the vi-insert keymap begin‐
ning with an escape character (probably cursor keys), but
leave the binding for the escape character itself (proba‐
bly vi-cmd-mode). This is incompatible with the option
-R.
-s in-string out-string ...
Bind each in-string to each out-string. When in-string
is typed, out-string will be pushed back and treated as
input to the line editor. When -R is also used, inter‐
pret the in-strings as ranges.
in-string command ...
Bind each in-string to each command. When -R is used,
interpret the in-strings as ranges.
[ in-string ]
List key bindings. If an in-string is specified, the
binding of that string in the selected keymap is dis‐
played. Otherwise, all key bindings in the selected
keymap are displayed. (As a special case, if the -e or
-v option is used alone, the keymap is not displayed -
the implicit linking of keymaps is the only thing that
happens.)
When the option -p is used, the in-string must be
present. The listing shows all bindings which have the
given key sequence as a prefix, not including any bind‐
ings for the key sequence itself.
When the -L option is used, the list is in the form of
bindkey commands to create the key bindings.
When the -R option is used as noted above, a valid range consists of
two characters, with an optional `-' between them. All characters
between the two specified, inclusive, are bound as specified.
For either in-string or out-string, the following escape sequences are
recognised:
\a bell character
\b backspace
\e, \E escape
\f form feed
\n linefeed (newline)
\r carriage return
\t horizontal tab
\v vertical tab
\NNN character code in octal
\xNN character code in hexadecimal
\M[-]X character with meta bit set
\C[-]X control character
^X control character
In all other cases, `\' escapes the following character. Delete is
written as `^?'. Note that `\M^?' and `^\M?' are not the same, and
that (unlike emacs), the bindings `\M-X' and `\eX' are entirely dis‐
tinct, although they are initialized to the same bindings by `bindkey
-m'.
vared [ -Aache ] [ -p prompt ] [ -r rprompt ] name
The value of the parameter name is loaded into the edit buffer,
and the line editor is invoked. When the editor exits, name is
set to the string value returned by the editor. When the -c
flag is given, the parameter is created if it doesn't already
exist. The -a flag may be given with -c to create an array
parameter, or the -A flag to create an associative array. If
the type of an existing parameter does not match the type to be
created, the parameter is unset and recreated.
If an array or array slice is being edited, separator characters
as defined in $IFS will be shown quoted with a backslash, as
will backslashes themselves. Conversely, when the edited text
is split into an array, a backslash quotes an immediately fol‐
lowing separator character or backslash; no other special han‐
dling of backslashes, or any handling of quotes, is performed.
Individual elements of existing array or associative array
parameters may be edited by using subscript syntax on name. New
elements are created automatically, even without -c.
If the -p flag is given, the following string will be taken as
the prompt to display at the left. If the -r flag is given, the
following string gives the prompt to display at the right. If
the -h flag is specified, the history can be accessed from ZLE.
If the -e flag is given, typing ^D (Control-D) on an empty line
causes vared to exit immediately with a non-zero return value.
zle -l [ -L | -a ] [ string ... ]
zle -D widget ...
zle -A old-widget new-widget
zle -N widget [ function ]
zle -C widget completion-widget function
zle -R [ -c ] [ display-string ] [ string ... ]
zle -M string
zle -U string
zle -I
zle widget [ -n num ] [ -N ] args ...
zle The zle builtin performs a number of different actions concern‐
ing ZLE. Which operation it performs depends on its options:
-l [ -L | -a ]
List all existing user-defined widgets. If the -L option
is used, list in the form of zle commands to create the
widgets.
When combined with the -a option, all widget names are
listed, including the builtin ones. In this case the -L
option is ignored.
If at least one string is given, nothing will be printed
but the return status will be zero if all strings are
names of existing widgets (or of user-defined widgets if
the -a flag is not given) and non-zero if at least one
string is not a name of an defined widget.
-D widget ...
Delete the named widgets.
-A old-widget new-widget
Make the new-widget name an alias for old-widget, so that
both names refer to the same widget. The names have
equal standing; if either is deleted, the other remains.
If there is already a widget with the new-widget name, it
is deleted.
-N widget [ function ]
Create a user-defined widget. If there is already a wid‐
get with the specified name, it is overwritten. When the
new widget is invoked from within the editor, the speci‐
fied shell function is called. If no function name is
specified, it defaults to the same name as the widget.
For further information, see the section Widgets in zsh‐
zle(1).
-C widget completion-widget function
Create a user-defined completion widget named widget. The
completion widget will behave like the built-in comple‐
tion-widget whose name is given as completion-widget. To
generate the completions, the shell function function
will be called. For further information, see zshcomp‐
wid(1).
-R [ -c ] [ display-string ] [ string ... ]
Redisplay the command line; this is to be called from
within a user-defined widget to allow changes to become
visible. If a display-string is given and not empty,
this is shown in the status line (immediately below the
line being edited).
If the optional strings are given they are listed below
the prompt in the same way as completion lists are
printed. If no strings are given but the -c option is
used such a list is cleared.
Note that this option is only useful for widgets that do
not exit immediately after using it because the strings
displayed will be erased immediately after return from
the widget.
This command can safely be called outside user defined
widgets; if zle is active, the display will be refreshed,
while if zle is not active, the command has no effect.
In this case there will usually be no other arguments.
The status is zero if zle was active, else one.
-M string
As with the -R option, the string will be displayed below
the command line; unlike the -R option, the string will
not be put into the status line but will instead be
printed normally below the prompt. This means that the
string will still be displayed after the widget returns
(until it is overwritten by subsequent commands).
-U string
This pushes the characters in the string onto the input
stack of ZLE. After the widget currently executed fin‐
ishes ZLE will behave as if the characters in the string
were typed by the user.
As ZLE uses a stack, if this option is used repeatedly
the last string pushed onto the stack will be processed
first. However, the characters in each string will be
processed in the order in which they appear in the
string.
-I Unusually, this option is only useful outside ordinary
widget functions. It invalidates the current zle display
in preparation for output; usually this will be from a
trap function. It has no effect if zle is not active.
When a trap exits, the shell checks to see if the display
needs restoring, hence the following will print output in
such a way as not to disturb the line being edited:
TRAPUSR1() {
# Invalidate zle display
zle -I
# Show output
print Hello
}
Note that there are better ways of manipulating the dis‐
play from within zle widgets. In general, the trap func‐
tion may need to test whether zle is loaded before using
this method; if it is not, there is no point in loading
it specially since the line editor will not be active.
The status is zero if zle was active, else one.
widget [ -n num ] [ -N ] args ...
Invoke the specified widget. This can only be done when
ZLE is active; normally this will be within a
user-defined widget.
With the options -n and -N, the current numerical argu‐
ment will be saved and then restored after the call to
widget; `-n num' sets the numerical argument temporarily
to num, while `-N' sets it to the default, i.e. as if
there were none.
Any further arguments will be passed to the widget. If
it is a shell function, these are passed down as posi‐
tional parameters; for builtin widgets it is up to the
widget in question what it does with them. Currently
arguments are only handled by the incremental-search com‐
mands, the history-search-forward and -backward and the
corresponding functions prefixed by vi-, and by univer‐
sal-argument. No error is flagged if the command does
not use the arguments, or only uses some of them.
The return status reflects the success or failure of the
operation carried out by the widget, or if it is a
user-defined widget the return status of the shell func‐
tion.
A non-zero return status causes the shell to beep when
the widget exits, unless the BEEP options was unset or
the widget was called via the zle command. Thus if a
user defined widget requires an immediate beep, it should
call the beep widget directly.
With no options and no arguments, only the return status will be set.
It is zero if ZLE is currently active and widgets could be invoked
using this builtin command and non-zero if ZLE is not active.
WIDGETS
All actions in the editor are performed by `widgets'. A widget's job
is simply to perform some small action. The ZLE commands that key
sequences in keymaps are bound to are in fact widgets. Widgets can be
user-defined or built in.
The standard widgets built in to ZLE are listed in Standard Widgets
below. Other built-in widgets can be defined by other modules (see
zshmodules(1)). Each built-in widget has two names: its normal canoni‐
cal name, and the same name preceded by a `.'. The `.' name is spe‐
cial: it can't be rebound to a different widget. This makes the widget
available even when its usual name has been redefined.
User-defined widgets are defined using `zle -N', and implemented as
shell functions. When the widget is executed, the corresponding shell
function is executed, and can perform editing (or other) actions. It
is recommended that user-defined widgets should not have names starting
with `.'.
USER-DEFINED WIDGETS
User-defined widgets, being implemented as shell functions, can execute
any normal shell command. They can also run other widgets (whether
built-in or user-defined) using the zle builtin command. The standard
input of the function is closed to prevent external commands from unin‐
tentionally blocking ZLE by reading from the terminal, but read -k or
read -q can be used to read characters. Finally, they can examine and
edit the ZLE buffer being edited by reading and setting the special
parameters described below.
These special parameters are always available in widget functions, but
are not in any way special outside ZLE. If they have some normal value
outside ZLE, that value is temporarily inaccessible, but will return
when the widget function exits. These special parameters in fact have
local scope, like parameters created in a function using local.
Inside completion widgets and traps called while ZLE is active, these
parameters are available read-only.
BUFFER (scalar)
The entire contents of the edit buffer. If it is written to,
the cursor remains at the same offset, unless that would put it
outside the buffer.
BUFFERLINES
The number of screen lines needed for the edit buffer currently
displayed on screen (i.e. without any changes to the preceding
parameters done after the last redisplay).
CURSOR (integer)
The offset of the cursor, within the edit buffer. This is in
the range 0 to $#BUFFER, and is by definition equal to
$#LBUFFER. Attempts to move the cursor outside the buffer will
result in the cursor being moved to the appropriate end of the
buffer.
HISTNO (integer)
The current history number.
KEYS (scalar)
The keys typed to invoke this widget, as a literal string.
LASTWIDGET (scalar)
The name of the last widget that was executed.
LBUFFER (scalar)
The part of the buffer that lies to the left of the cursor posi‐
tion. If it is assigned to, only that part of the buffer is
replaced, and the cursor remains between the new $LBUFFER and
the old $RBUFFER.
MARK (integer)
Like CURSOR, but for the mark.
NUMERIC (integer)
The numeric argument. If no numeric argument was given, this
parameter is unset. When this is set inside a widget function,
builtin widgets called with the zle builtin command will use the
value assigned. If it is unset inside a widget function, builtin
widgets called behave as if no numeric argument was given.
PENDING (integer)
The number of bytes pending for input, i.e. the number of bytes
which have already been typed and can immediately be read. On
systems where the shell is not able to get this information,
this parameter will always have a value of zero.
PREBUFFER (scalar)
In a multi-line input at the secondary prompt, this read-only
parameter contains the contents of the lines before the one the
cursor is currently in.
RBUFFER (scalar)
The part of the buffer that lies to the right of the cursor
position. If it is assigned to, only that part of the buffer is
replaced, and the cursor remains between the old $LBUFFER and
the new $RBUFFER.
WIDGET (scalar)
The name of the widget currently being executed.
STANDARD WIDGETS
The following is a list of all the standard widgets, and their default
bindings in emacs mode, vi command mode and vi insert mode (the
`emacs', `vicmd' and `viins' keymaps, respectively).
Note that cursor keys are bound to movement keys in all three keymaps;
the shell assumes that the cursor keys send the key sequences reported
by the terminal-handling library (termcap or terminfo). The key
sequences shown in the list are those based on the VT100, common on
many modern terminals, but in fact these are not necessarily bound. In
the case of the viins keymap, the initial escape character of the
sequences serves also to return to the vicmd keymap: whether this hap‐
pens is determined by the KEYTIMEOUT parameter, see zshparam(1).
Movement
vi-backward-blank-word (unbound) (B) (unbound)
Move backward one word, where a word is defined as a series of
non-blank characters.
backward-char (^B ESC-[D) (unbound) (unbound)
Move backward one character.
vi-backward-char (unbound) (^H h ^?) (ESC-[D)
Move backward one character, without changing lines.
backward-word (ESC-B ESC-b) (unbound) (unbound)
Move to the beginning of the previous word.
emacs-backward-word
Move to the beginning of the previous word.
vi-backward-word (unbound) (b) (unbound)
Move to the beginning of the previous word, vi-style.
beginning-of-line (^A) (unbound) (unbound)
Move to the beginning of the line. If already at the beginning
of the line, move to the beginning of the previous line, if any.
vi-beginning-of-line
Move to the beginning of the line, without changing lines.
end-of-line (^E) (unbound) (unbound)
Move to the end of the line. If already at the end of the line,
move to the end of the next line, if any.
vi-end-of-line (unbound) ($) (unbound)
Move to the end of the line. If an argument is given to this
command, the cursor will be moved to the end of the line (argu‐
ment - 1) lines down.
vi-forward-blank-word (unbound) (W) (unbound)
Move forward one word, where a word is defined as a series of
non-blank characters.
vi-forward-blank-word-end (unbound) (E) (unbound)
Move to the end of the current word, or, if at the end of the
current word, to the end of the next word, where a word is
defined as a series of non-blank characters.
forward-char (^F ESC-[C) (unbound) (unbound)
Move forward one character.
vi-forward-char (unbound) (space l) (ESC-[C)
Move forward one character.
vi-find-next-char (^X^F) (f) (unbound)
Read a character from the keyboard, and move to the next occur‐
rence of it in the line.
vi-find-next-char-skip (unbound) (t) (unbound)
Read a character from the keyboard, and move to the position
just before the next occurrence of it in the line.
vi-find-prev-char (unbound) (F) (unbound)
Read a character from the keyboard, and move to the previous
occurrence of it in the line.
vi-find-prev-char-skip (unbound) (T) (unbound)
Read a character from the keyboard, and move to the position
just after the previous occurrence of it in the line.
vi-first-non-blank (unbound) (^) (unbound)
Move to the first non-blank character in the line.
vi-forward-word (unbound) (w) (unbound)
Move forward one word, vi-style.
forward-word (ESC-F ESC-f) (unbound) (unbound)
Move to the beginning of the next word. The editor's idea of a
word is specified with the WORDCHARS parameter.
emacs-forward-word
Move to the end of the next word.
vi-forward-word-end (unbound) (e) (unbound)
Move to the end of the next word.
vi-goto-column (ESC-|) (|) (unbound)
Move to the column specified by the numeric argument.
vi-goto-mark (unbound) (`) (unbound)
Move to the specified mark.
vi-goto-mark-line (unbound) (') (unbound)
Move to beginning of the line containing the specified mark.
vi-repeat-find (unbound) (;) (unbound)
Repeat the last vi-find command.
vi-rev-repeat-find (unbound) (,) (unbound)
Repeat the last vi-find command in the opposite direction.
History Control
beginning-of-buffer-or-history (ESC-<) (unbound) (unbound)
Move to the beginning of the buffer, or if already there, move
to the first event in the history list.
beginning-of-line-hist
Move to the beginning of the line. If already at the beginning
of the buffer, move to the previous history line.
beginning-of-history
Move to the first event in the history list.
down-line-or-history (^N ESC-[B) (j) (ESC-[B)
Move down a line in the buffer, or if already at the bottom
line, move to the next event in the history list.
vi-down-line-or-history (unbound) (+) (unbound)
Move down a line in the buffer, or if already at the bottom
line, move to the next event in the history list. Then move to
the first non-blank character on the line.
down-line-or-search
Move down a line in the buffer, or if already at the bottom
line, search forward in the history for a line beginning with
the first word in the buffer.
If called from a function by the zle command with arguments, the
first argument is taken as the string for which to search,
rather than the first word in the buffer.
down-history (unbound) (^N) (unbound)
Move to the next event in the history list.
history-beginning-search-backward
Search backward in the history for a line beginning with the
current line up to the cursor. This leaves the cursor in its
original position.
end-of-buffer-or-history (ESC->) (unbound) (unbound)
Move to the end of the buffer, or if already there, move to the
last event in the history list.
end-of-line-hist
Move to the end of the line. If already at the end of the buf‐
fer, move to the next history line.
end-of-history
Move to the last event in the history list.
vi-fetch-history (unbound) (G) (unbound)
Fetch the history line specified by the numeric argument. This
defaults to the current history line (i.e. the one that isn't
history yet).
history-incremental-search-backward (^R ^Xr) (unbound) (unbound)
Search backward incrementally for a specified string. The
search is case-insensitive if the search string does not have
uppercase letters and no numeric argument was given. The string
may begin with `^' to anchor the search to the beginning of the
line.
A restricted set of editing functions is available in the
mini-buffer. An interrupt signal, as defined by the stty set‐
ting, will stop the search and go back to the original line. An
undefined key will have the same effect. The supported functions
are: backward-delete-char, vi-backward-delete-char,
clear-screen, redisplay, quoted-insert, vi-quoted-insert,
accept-and-hold, accept-and-infer-next-history, accept-line and
accept-line-and-down-history.
magic-space just inserts a space. vi-cmd-mode toggles between
the `main' and `vicmd' keymaps; the `main' keymap (insert mode)
will be selected initially. history-incremental-search-backward
will get the next occurrence of the contents of the mini-buffer.
history-incremental-search-forward inverts the sense of the
search. vi-repeat-search and vi-rev-repeat-search are similarly
supported. The direction of the search is indicated in the
mini-buffer.
Any multi-character string that is not bound to one of the above
functions will beep and interrupt the search, leaving the last
found line in the buffer. Any single character that is not bound
to one of the above functions, or self-insert or
self-insert-unmeta, will have the same effect but the function
will be executed.
When called from a widget function by the zle command, the
incremental search commands can take a string argument. This
will be treated as a string of keys, as for arguments to the
bindkey command, and used as initial input for the command. Any
characters in the string which are unused by the incremental
search will be silently ignored. For example,
zle history-incremental-search-backward forceps
will search backwards for forceps, leaving the minibuffer con‐
taining the string `forceps'.
history-incremental-search-forward (^S ^Xs) (unbound) (unbound)
Search forward incrementally for a specified string. The search
is case-insensitive if the search string does not have uppercase
letters and no numeric argument was given. The string may begin
with `^' to anchor the search to the beginning of the line. The
functions available in the mini-buffer are the same as for his‐
tory-incremental-search-backward.
history-search-backward (ESC-P ESC-p) (unbound) (unbound)
Search backward in the history for a line beginning with the
first word in the buffer.
If called from a function by the zle command with arguments, the
first argument is taken as the string for which to search,
rather than the first word in the buffer.
vi-history-search-backward (unbound) (/) (unbound)
Search backward in the history for a specified string. The
string may begin with `^' to anchor the search to the beginning
of the line.
A restricted set of editing functions is available in the
mini-buffer. An interrupt signal, as defined by the stty set‐
ting, will stop the search. The functions available in the
mini-buffer are: accept-line, backward-delete-char, vi-back‐
ward-delete-char, backward-kill-word, vi-backward-kill-word,
clear-screen, redisplay, quoted-insert and vi-quoted-insert.
vi-cmd-mode is treated the same as accept-line, and magic-space
is treated as a space. Any other character that is not bound to
self-insert or self-insert-unmeta will beep and be ignored. If
the function is called from vi command mode, the bindings of the
current insert mode will be used.
If called from a function by the zle command with arguments, the
first argument is taken as the string for which to search,
rather than the first word in the buffer.
history-search-forward (ESC-N ESC-n) (unbound) (unbound)
Search forward in the history for a line beginning with the
first word in the buffer.
If called from a function by the zle command with arguments, the
first argument is taken as the string for which to search,
rather than the first word in the buffer.
vi-history-search-forward (unbound) (?) (unbound)
Search forward in the history for a specified string. The
string may begin with `^' to anchor the search to the beginning
of the line. The functions available in the mini-buffer are the
same as for vi-history-search-backward. Argument handling is
also the same as for that command.
infer-next-history (^X^N) (unbound) (unbound)
Search in the history list for a line matching the current one
and fetch the event following it.
insert-last-word (ESC-_ ESC-.) (unbound) (unbound)
Insert the last word from the previous history event at the cur‐
sor position. If a positive numeric argument is given, insert
that word from the end of the previous history event. If the
argument is zero or negative insert that word from the left
(zero inserts the previous command word). Repeating this com‐
mand replaces the word just inserted with the last word from the
history event prior to the one just used; numeric arguments can
be used in the same way to pick a word from that event.
vi-repeat-search (unbound) (n) (unbound)
Repeat the last vi history search.
vi-rev-repeat-search (unbound) (N) (unbound)
Repeat the last vi history search, but in reverse.
up-line-or-history (^P ESC-[A) (k) (ESC-[A)
Move up a line in the buffer, or if already at the top line,
move to the previous event in the history list.
vi-up-line-or-history (unbound) (-) (unbound)
Move up a line in the buffer, or if already at the top line,
move to the previous event in the history list. Then move to
the first non-blank character on the line.
up-line-or-search
Move up a line in the buffer, or if already at the top line,
search backward in the history for a line beginning with the
first word in the buffer.
If called from a function by the zle command with arguments, the
first argument is taken as the string for which to search,
rather than the first word in the buffer.
up-history (unbound) (^P) (unbound)
Move to the previous event in the history list.
history-beginning-search-forward
Search forward in the history for a line beginning with the cur‐
rent line up to the cursor. This leaves the cursor in its orig‐
inal position.
Modifying Text
vi-add-eol (unbound) (A) (unbound)
Move to the end of the line and enter insert mode.
vi-add-next (unbound) (a) (unbound)
Enter insert mode after the current cursor position, without
changing lines.
backward-delete-char (^H ^?) (unbound) (unbound)
Delete the character behind the cursor.
vi-backward-delete-char (unbound) (X) (^H)
Delete the character behind the cursor, without changing lines.
If in insert mode, this won't delete past the point where insert
mode was last entered.
backward-delete-word
Delete the word behind the cursor.
backward-kill-line
Kill from the beginning of the line to the cursor position.
backward-kill-word (^W ESC-^H ESC-^?) (unbound) (unbound)
Kill the word behind the cursor.
vi-backward-kill-word (unbound) (unbound) (^W)
Kill the word behind the cursor, without going past the point
where insert mode was last entered.
capitalize-word (ESC-C ESC-c) (unbound) (unbound)
Capitalize the current word and move past it.
vi-change (unbound) (c) (unbound)
Read a movement command from the keyboard, and kill from the
cursor position to the endpoint of the movement. Then enter
insert mode. If the command is vi-change, change the current
line.
vi-change-eol (unbound) (C) (unbound)
Kill to the end of the line and enter insert mode.
vi-change-whole-line (unbound) (S) (unbound)
Kill the current line and enter insert mode.
copy-region-as-kill (ESC-W ESC-w) (unbound) (unbound)
Copy the area from the cursor to the mark to the kill buffer.
copy-prev-word (ESC-^_) (unbound) (unbound)
Duplicate the word to the left of the cursor.
copy-prev-shell-word (ESC-^_) (unbound) (unbound)
Like copy-prev-word, but the word is found by using shell pars‐
ing, whereas copy-prev-word looks for blanks. This makes a dif‐
ference when the word is quoted and contains spaces.
vi-delete (unbound) (d) (unbound)
Read a movement command from the keyboard, and kill from the
cursor position to the endpoint of the movement. If the command
is vi-delete, kill the current line.
delete-char
Delete the character under the cursor.
vi-delete-char (unbound) (x) (unbound)
Delete the character under the cursor, without going past the
end of the line.
delete-word
Delete the current word.
down-case-word (ESC-L ESC-l) (unbound) (unbound)
Convert the current word to all lowercase and move past it.
kill-word (ESC-D ESC-d) (unbound) (unbound)
Kill the current word.
gosmacs-transpose-chars
Exchange the two characters behind the cursor.
vi-indent (unbound) (>) (unbound)
Indent a number of lines.
vi-insert (unbound) (i) (unbound)
Enter insert mode.
vi-insert-bol (unbound) (I) (unbound)
Move to the first non-blank character on the line and enter
insert mode.
vi-join (^X^J) (J) (unbound)
Join the current line with the next one.
kill-line (^K) (unbound) (unbound)
Kill from the cursor to the end of the line. If already on the
end of the line, kill the newline character.
vi-kill-line (unbound) (unbound) (^U)
Kill from the cursor back to wherever insert mode was last
entered.
vi-kill-eol (unbound) (D) (unbound)
Kill from the cursor to the end of the line.
kill-region
Kill from the cursor to the mark.
kill-buffer (^X^K) (unbound) (unbound)
Kill the entire buffer.
kill-whole-line (^U) (unbound) (unbound)
Kill the current line.
vi-match-bracket (^X^B) (%) (unbound)
Move to the bracket character (one of {}, () or []) that matches
the one under the cursor. If the cursor is not on a bracket
character, move forward without going past the end of the line
to find one, and then go to the matching bracket.
vi-open-line-above (unbound) (O) (unbound)
Open a line above the cursor and enter insert mode.
vi-open-line-below (unbound) (o) (unbound)
Open a line below the cursor and enter insert mode.
vi-oper-swap-case
Read a movement command from the keyboard, and swap the case of
all characters from the cursor position to the endpoint of the
movement. If the movement command is vi-oper-swap-case, swap
the case of all characters on the current line.
overwrite-mode (^X^O) (unbound) (unbound)
Toggle between overwrite mode and insert mode.
vi-put-before (unbound) (P) (unbound)
Insert the contents of the kill buffer before the cursor. If
the kill buffer contains a sequence of lines (as opposed to
characters), paste it above the current line.
vi-put-after (unbound) (p) (unbound)
Insert the contents of the kill buffer after the cursor. If the
kill buffer contains a sequence of lines (as opposed to charac‐
ters), paste it below the current line.
quoted-insert (^V) (unbound) (unbound)
Insert the next character typed into the buffer literally. An
interrupt character will not be inserted.
vi-quoted-insert (unbound) (unbound) (^Q ^V)
Display a `^' at the cursor position, and insert the next char‐
acter typed into the buffer literally. An interrupt character
will not be inserted.
quote-line (ESC-') (unbound) (unbound)
Quote the current line; that is, put a `'' character at the
beginning and the end, and convert all `'' characters to `'\'''.
quote-region (ESC-") (unbound) (unbound)
Quote the region from the cursor to the mark.
vi-replace (unbound) (R) (unbound)
Enter overwrite mode.
vi-repeat-change (unbound) (.) (unbound)
Repeat the last vi mode text modification. If a count was used
with the modification, it is remembered. If a count is given to
this command, it overrides the remembered count, and is remem‐
bered for future uses of this command. The cut buffer specifi‐
cation is similarly remembered.
vi-replace-chars (unbound) (r) (unbound)
Replace the character under the cursor with a character read
from the keyboard.
self-insert (printable characters) (unbound) (printable characters and
some control characters)
Insert a character into the buffer at the cursor position.
self-insert-unmeta (ESC-^I ESC-^J ESC-^M) (unbound) (unbound)
Insert a character into the buffer after stripping the meta bit
and converting ^M to ^J.
vi-substitute (unbound) (s) (unbound)
Substitute the next character(s).
vi-swap-case (unbound) (~) (unbound)
Swap the case of the character under the cursor and move past
it.
transpose-chars (^T) (unbound) (unbound)
Exchange the two characters to the left of the cursor if at end
of line, else exchange the character under the cursor with the
character to the left.
transpose-words (ESC-T ESC-t) (unbound) (unbound)
Exchange the current word with the one before it.
vi-unindent (unbound) (<) (unbound)
Unindent a number of lines.
up-case-word (ESC-U ESC-u) (unbound) (unbound)
Convert the current word to all caps and move past it.
yank (^Y) (unbound) (unbound)
Insert the contents of the kill buffer at the cursor position.
yank-pop (ESC-y) (unbound) (unbound)
Remove the text just yanked, rotate the kill-ring, and yank the
new top. Only works following yank or yank-pop.
vi-yank (unbound) (y) (unbound)
Read a movement command from the keyboard, and copy the region
from the cursor position to the endpoint of the movement into
the kill buffer. If the command is vi-yank, copy the current
line.
vi-yank-whole-line (unbound) (Y) (unbound)
Copy the current line into the kill buffer.
vi-yank-eol
Copy the region from the cursor position to the end of the line
into the kill buffer. Arguably, this is what Y should do in vi,
but it isn't what it actually does.
Arguments
digit-argument (ESC-0..ESC-9) (1-9) (unbound)
Start a new numeric argument, or add to the current one. See
also vi-digit-or-beginning-of-line. This only works if bound to
a key sequence ending in a decimal digit.
Inside a widget function, a call to this function treats the
last key of the key sequence which called the widget as the
digit.
neg-argument (ESC--) (unbound) (unbound)
Changes the sign of the following argument.
universal-argument
Multiply the argument of the next command by 4. Alternatively,
if this command is followed by an integer (positive or nega‐
tive), use that as the argument for the next command. Thus dig‐
its cannot be repeated using this command. For example, if this
command occurs twice, followed immediately by forward-char, move
forward sixteen spaces; if instead it is followed by -2, then
forward-char, move backward two spaces.
Inside a widget function, if passed an argument, i.e. `zle uni‐
versal-argument num', the numerical argument will be set to num;
this is equivalent to `NUMERIC=num'.
Completion
accept-and-menu-complete
In a menu completion, insert the current completion into the
buffer, and advance to the next possible completion.
complete-word
Attempt completion on the current word.
delete-char-or-list (^D) (unbound) (unbound)
Delete the character under the cursor. If the cursor is at the
end of the line, list possible completions for the current word.
expand-cmd-path
Expand the current command to its full pathname.
expand-or-complete (TAB) (unbound) (TAB)
Attempt shell expansion on the current word. If that fails,
attempt completion.
expand-or-complete-prefix
Attempt shell expansion on the current word up to cursor.
expand-history (ESC-space ESC-!) (unbound) (unbound)
Perform history expansion on the edit buffer.
expand-word (^X*) (unbound) (unbound)
Attempt shell expansion on the current word.
list-choices (ESC-^D) (^D =) (^D)
List possible completions for the current word.
list-expand (^Xg ^XG) (^G) (^G)
List the expansion of the current word.
magic-space
Perform history expansion and insert a space into the buffer.
This is intended to be bound to space.
menu-complete
Like complete-word, except that menu completion is used. See
the MENU_COMPLETE option.
menu-expand-or-complete
Like expand-or-complete, except that menu completion is used.
reverse-menu-complete
Perform menu completion, like menu-complete, except that if a
menu completion is already in progress, move to the previous
completion rather than the next.
end-of-list
When a previous completion displayed a list below the prompt,
this widget can be used to move the prompt below the list.
Miscellaneous
accept-and-hold (ESC-A ESC-a) (unbound) (unbound)
Push the contents of the buffer on the buffer stack and execute
it.
accept-and-infer-next-history
Execute the contents of the buffer. Then search the history
list for a line matching the current one and push the event fol‐
lowing onto the buffer stack.
accept-line (^J ^M) (^J ^M) (^J ^M)
Finish editing the buffer. Normally this causes the buffer to
be executed as a shell command.
accept-line-and-down-history (^O) (unbound) (unbound)
Execute the current line, and push the next history event on the
the buffer stack.
beep Beep, unless the BEEP option is unset.
vi-cmd-mode (^X^V) (unbound) (^[)
Enter command mode; that is, select the `vicmd' keymap. Yes,
this is bound by default in emacs mode.
vi-caps-lock-panic
Hang until any lowercase key is pressed. This is for vi users
without the mental capacity to keep track of their caps lock key
(like the author).
clear-screen (^L ESC-^L) (^L) (^L)
Clear the screen and redraw the prompt.
describe-key-briefly
Reads a key sequence, then prints the function bound to that
sequence.
exchange-point-and-mark (^X^X) (unbound) (unbound)
Exchange the cursor position with the position of the mark.
execute-named-cmd (ESC-x) (unbound) (unbound)
Read the name of an editor command and execute it. A restricted
set of editing functions is available in the mini-buffer. An
interrupt signal, as defined by the stty setting, will abort the
function. The allowed functions are: backward-delete-char,
vi-backward-delete-char, clear-screen, redisplay, quoted-insert,
vi-quoted-insert, backward-kill-word, vi-backward-kill-word,
kill-whole-line, vi-kill-line, backward-kill-line, list-choices,
delete-char-or-list, complete-word, accept-line, expand-or-com‐
plete and expand-or-complete-prefix.
kill-region kills the last word, and vi-cmd-mode is treated the
same as accept-line. The space and tab characters, if not bound
to one of these functions, will complete the name and then list
the possibilities if the AUTO_LIST option is set. Any other
character that is not bound to self-insert or self-insert-unmeta
will beep and be ignored. The bindings of the current insert
mode will be used.
execute-last-named-cmd (ESC-z) (unbound) (unbound)
Redo the last function executed with execute-named-cmd.
get-line (ESC-G ESC-g) (unbound) (unbound)
Pop the top line off the buffer stack and insert it at the cur‐
sor position.
pound-insert (unbound) (#) (unbound)
If there is no # character at the beginning of the buffer, add
one to the beginning of each line. If there is one, remove a #
from each line that has one. In either case, accept the current
line. The INTERACTIVE_COMMENTS option must be set for this to
have any usefulness.
vi-pound-insert
If there is no # character at the beginning of the current line,
add one. If there is one, remove it. The INTERACTIVE_COMMENTS
option must be set for this to have any usefulness.
push-input
Push the entire current multiline construct onto the buffer
stack and return to the top-level (PS1) prompt. If the current
parser construct is only a single line, this is exactly like
push-line. Next time the editor starts up or is popped with
get-line, the construct will be popped off the top of the buffer
stack and loaded into the editing buffer.
push-line (^Q ESC-Q ESC-q) (unbound) (unbound)
Push the current buffer onto the buffer stack and clear the buf‐
fer. Next time the editor starts up, the buffer will be popped
off the top of the buffer stack and loaded into the editing buf‐
fer.
push-line-or-edit
At the top-level (PS1) prompt, equivalent to push-line. At a
secondary (PS2) prompt, move the entire current multiline con‐
struct into the editor buffer. The latter is equivalent to
push-input followed by get-line.
redisplay (unbound) (^R) (^R)
Redisplays the edit buffer.
send-break (^G ESC-^G) (unbound) (unbound)
Abort the current editor function, e.g. execute-named-command,
or the editor itself, e.g. if you are in vared. Otherwise abort
the parsing of the current line.
run-help (ESC-H ESC-h) (unbound) (unbound)
Push the buffer onto the buffer stack, and execute the command
`run-help cmd', where cmd is the current command. run-help is
normally aliased to man.
vi-set-buffer (unbound) (") (unbound)
Specify a buffer to be used in the following command. There are
35 buffers that can be specified: the 26 `named' buffers "a to
"z and the nine `queued' buffers "1 to "9. The named buffers
can also be specified as "A to "Z.
When a buffer is specified for a cut command, the text being cut
replaces the previous contents of the specified buffer. If a
named buffer is specified using a capital, the newly cut text is
appended to the buffer instead of overwriting it.
If no buffer is specified for a cut command, "1 is used, and the
contents of "1 to "8 are each shifted along one buffer; the con‐
tents of "9 is lost.
vi-set-mark (unbound) (m) (unbound)
Set the specified mark at the cursor position.
set-mark-command (^@) (unbound) (unbound)
Set the mark at the cursor position.
spell-word (ESC-$ ESC-S ESC-s) (unbound) (unbound)
Attempt spelling correction on the current word.
undefined-key
This command is executed when a key sequence that is not bound
to any command is typed. By default it beeps.
undo (^_ ^Xu ^X^U) (unbound) (unbound)
Incrementally undo the last text modification.
redo Incrementally redo undone text modifications.
vi-undo-change (unbound) (u) (unbound)
Undo the last text modification. If repeated, redo the modifi‐
cation.
what-cursor-position (^X=) (unbound) (unbound)
Print the character under the cursor, its code as an octal, dec‐
imal and hexadecimal number, the current cursor position within
the buffer and the column of the cursor in the current line.
where-is
Read the name of an editor command and and print the listing of
key sequences that invoke the specified command.
which-command (ESC-?) (unbound) (unbound)
Push the buffer onto the buffer stack, and execute the command
`which-command cmd'. where cmd is the current command.
which-command is normally aliased to whence.
vi-digit-or-beginning-of-line (unbound) (0) (unbound)
If the last command executed was a digit as part of an argument,
continue the argument. Otherwise, execute vi-beginning-of-line.
ZSHCOMPWID(1)ZSHCOMPWID(1)NAME
zshcompwid - zsh completion widgets
DESCRIPTION
The shell's programmable completion mechanism can be manipulated in two
ways; here the low-level features supporting the newer, function-based
mechanism are defined. A complete set of shell functions based on
these features is described in zshcompsys(1), and users with no inter‐
est in adding to that system (or, potentially, writing their own ---
see dictionary entry for `hubris') should skip this section. The older
system based on the compctl builtin command is described in zshcom‐
pctl(1).
Completion widgets are defined by the -C option to the zle builtin com‐
mand provided by the zsh/zle module (see zshzle(1)). For example,
zle -C complete expand-or-complete completer
defines a widget named `complete'. The second argument is the name of
any of the builtin widgets that handle completions: complete-word,
expand-or-complete, expand-or-complete-prefix, menu-complete,
menu-expand-or-complete, reverse-menu-complete, list-choices, or
delete-char-or-list. Note that this will still work even if the widget
in question has been re-bound.
When this newly defined widget is bound to a key using the bindkey
builtin command defined in the zsh/zle module (see zshzle(1)), typing
that key will call the shell function `completer'. This function is
responsible for generating the possible matches using the builtins
described below. As with other ZLE widgets, the function is called
with its standard input closed.
Once the function returns, the completion code takes over control again
and treats the matches in the same manner as the specified builtin wid‐
get, in this case expand-or-complete.
SPECIAL PARAMETERS
Inside completion widgets, and any functions called from them, some
parameters have special meaning; outside these functions they are not
special to the shell in any way. These parameters are used to pass
information between the completion code and the completion widget. Some
of the builtin commands and the condition codes use or change the cur‐
rent values of these parameters. Any existing values will be hidden
during execution of completion widgets; except for compstate, the
parameters are reset on each function exit (including nested function
calls from within the completion widget) to the values they had when
the function was entered.
CURRENT
This is the number of the current word, i.e. the word the cursor
is currently on in the words array. Note that this value is
only correct if the ksharrays option is not set.
IPREFIX
Initially this will be set to the empty string. This parameter
functions like PREFIX; it contains a string which precedes the
one in PREFIX and is not considered part of the list of matches.
Typically, a string is transferred from the beginning of PREFIX
to the end of IPREFIX, for example:
IPREFIX=${PREFIX%%\=*}=
PREFIX=${PREFIX#*=}
causes the part of the prefix up to and including the first
equal sign not to be treated as part of a matched string. This
can be done automatically by the compset builtin, see below.
ISUFFIX
As IPREFIX, but for a suffix that should not be considered part
of the matches; note that the ISUFFIX string follows the SUFFIX
string.
PREFIX Initially this will be set to the part of the current word from
the beginning of the word up to the position of the cursor; it
may be altered to give a common prefix for all matches.
QIPREFIX
This parameter is read-only and contains the quoted string up to
the word being completed. E.g. when completing `"foo', this
parameter contains the double quote. If the -q option of compset
is used (see below), and the original string was `"foo bar' with
the cursor on the `bar', this parameter contains `"foo '.
QISUFFIX
Like QIPREFIX, but containing the suffix.
SUFFIX Initially this will be set to the part of the current word from
the cursor position to the end; it may be altered to give a com‐
mon suffix for all matches. It is most useful when the option
COMPLETE_IN_WORD is set, as otherwise the whole word on the com‐
mand line is treated as a prefix.
compstate
This is an associative array with various keys and values that
the completion code uses to exchange information with the com‐
pletion widget. The keys are:
all_quotes
The -q option of the compset builtin command (see below)
allows a quoted string to be broken into separate words;
if the cursor is on one of those words, that word will be
completed, possibly invoking `compset -q' recursively.
With this key it is possible to test the types of quoted
strings which are currently broken into parts in this
fashion. Its value contains one character for each quot‐
ing level. The characters are a single quote or a double
quote for strings quoted with these characters and a
backslash for strings not starting with a quote charac‐
ter. The first character in the value always corresponds
to the innermost quoting level.
context
This will be set by the completion code to the overall
context in which completion is attempted. Possible values
are:
array_value
when completing inside the value of an array
parameter assignment; in this case the words array
contains the words inside the parentheses.
brace_parameter
when completing the name of a parameter in a
parameter expansion beginning with ${.
command
when completing for a normal command (either in
command position or for an argument of the com‐
mand).
condition
when completing inside a `[[...]]' conditional
expression; in this case the words array contains
only the words inside the conditional expression.
math when completing in a mathematical environment such
as a `((...))' construct.
parameter
when completing the name of a parameter in a
parameter expansion beginning with $ but not ${.
redirect
when completing after a redirection operator.
subscript
when completing inside a parameter subscript.
value when completing the value of a parameter assign‐
ment.
exact Controls the behaviour when the REC_EXACT option is set.
It will be set to accept if an exact match would be
accepted, and will be unset otherwise.
If it was set when at least one match equal to the string
on the line was generated, the match is accepted.
exact_string
The string of an exact match if one was found, otherwise
unset.
ignored
The number of words that were ignored because they
matched one of the patterns given with the -F option to
the compadd builtin command.
insert This controls the manner in which a match is inserted
into the command line. On entry to the widget function,
if it is unset the command line is not to be changed; if
set to unambiguous, any prefix common to all matches is
to be inserted; if set to automenu-unambiguous, the com‐
mon prefix is to be inserted and the next invocation of
the completion code may start menu completion (due to the
AUTO_MENU option being set); if set to menu or automenu
menu completion will be started for the matches currently
generated (in the latter case this will happen because
the AUTO_MENU is set). The value may also contain the
string `tab' when the completion code would normally not
really do completion, but only insert the TAB character.
On exit it may be set to any of the values above (where
setting it to the empty string is the same as unsetting
it), or to a number, in which case the match whose number
is given will be inserted into the command line. Nega‐
tive numbers count backward from the last match (with
`-1' selecting the last match) and out-of-range values
are wrapped around, so that a value of zero selects the
last match and a value one more than the maximum selects
the first. Unless the value of this key ends in a space,
the match is inserted as in a menu completion, i.e. with‐
out automatically appending a space.
Both menu and automenu may also specify the the number of
the match to insert, given after a colon. For example,
`menu:2' says to start menu completion, beginning with
the second match.
Note that a value containing the substring `tab' makes
the matches generated be ignored and only the TAB be
inserted.
Finally, it may also be set to all, which makes all
matches generated be inserted into the line.
insert_positions
When the completion system inserts an unambiguous string
into the line, there may be multiple places where charac‐
ters are missing or where the character inserted differs
from at least one match. The value of this key contains
a colon separated list of all these positions, as indexes
into the command line.
last_prompt
If this is set to a non-empty string for every match
added, the completion code will move the cursor back to
the previous prompt after the list of completions has
been displayed. Initially this is set or unset according
to the ALWAYS_LAST_PROMPT option.
list This controls whether or how the list of matches will be
displayed. If it is unset or empty they will never be
listed; if its value begins with list, they will always
be listed; if it begins with autolist or ambiguous, they
will be listed when the AUTO_LIST or LIST_AMBIGUOUS
options respectively would normally cause them to be.
If the substring force appears in the value, this makes
the list be shown even if there is only one match. Nor‐
mally, the list would be shown only if there are at least
two matches.
The value contains the substring packed if the
LIST_PACKED option is set. If this substring is given for
all matches added to a group, this group will show the
LIST_PACKED behavior. The same is done for the
LIST_ROWS_FIRST option with the substring rows.
Finally, if the value contains the string explanations,
only the explanation strings, if any, will be listed and
if it contains messages, only the messages (added with
the -x option of compadd) will be listed. If it contains
both explanations and messages both kinds of explanation
strings will be listed. It will be set appropriately on
entry to a completion widget and may be changed there.
list_lines
This gives the number of lines that are needed to display
the full list of completions. Note that to calculate the
total number of lines to display you need to add the num‐
ber of lines needed for the command line to this value,
this is available as the value of the BUFFERLINES special
parameter.
list_max
Initially this is set to the value of the LISTMAX parame‐
ter. It may be set to any other value; when the widget
exits this value will be used in the same way as the
value of LISTMAX.
nmatches
The number of matches generated and accepted by the com‐
pletion code so far.
old_insert
On entry to the widget this will be set to the number of
the match of an old list of completions that is currently
inserted into the command line. If no match has been
inserted, this is unset.
As with old_list, the value of this key will only be used
if it is the string keep. If it was set to this value by
the widget and there was an old match inserted into the
command line, this match will be kept and if the value of
the insert key specifies that another match should be
inserted, this will be inserted after the old one.
old_list
This is set to yes if there is still a valid list of com‐
pletions from a previous completion at the time the wid‐
get is invoked. This will usually be the case if and
only if the previous editing operation was a completion
widget or one of the builtin completion functions. If
there is a valid list and it is also currently shown on
the screen, the value of this key is shown.
After the widget has exited the value of this key is only
used if it was set to keep. In this case the completion
code will continue to use this old list. If the widget
generated new matches, they will not be used.
parameter
The name of the parameter when completing in a subscript
or in the value of a parameter assignment.
pattern_insert
Normally this is set to menu, which specifies that menu
completion will be used whenever a set of matches was
generated using pattern matching. If it is set to any
other non-empty string by the user and menu completion is
not selected by other option settings, the code will
instead insert any common prefix for the generated
matches as with normal completion.
pattern_match
Locally controls the behaviour given by the GLOB_COMPLETE
option. Initially it is set to `*' if and only if the
option is set. The completion widget may set it to this
value, to an empty string (which has the same effect as
unsetting it), or to any other non-empty string. If it
is non-empty, unquoted metacharacters on the command line
will be treated as patterns; if it is `*', then addition‐
ally a wildcard `*' is assumed at the cursor position; if
it is empty or unset, metacharacters will be treated lit‐
erally.
Note that the matcher specifications given to the compadd
builtin command are not used if this is set to a
non-empty string.
quote When completing inside quotes, this contains the quota‐
tion character (i.e. either a single quote, a double
quote, or a backtick). Otherwise it is unset.
quoting
When completing inside single quotes, this is set to the
string single; inside double quotes, the string double;
inside backticks, the string backtick. Otherwise it is
unset.
redirect
The redirection operator when completing in a redirection
position, i.e. one of <, >, etc.
restore
This is set to auto before a function is entered, which
forces the special parameters mentioned above (words,
CURRENT, PREFIX, IPREFIX, SUFFIX, and ISUFFIX) to be
restored to their previous values when the function
exits. If a function unsets it or sets it to any other
string, they will not be restored.
to_end Specifies the occasions on which the cursor is moved to
the end of a string when a match is inserted. On entry
to a widget function, it may be single if this will hap‐
pen when a single unambiguous match was inserted or match
if it will happen any time a match is inserted (for exam‐
ple, by menu completion; this is likely to be the effect
of the ALWAYS_TO_END option).
On exit, it may be set to single as above. It may also
be set to always, or to the empty string or unset; in
those cases the cursor will be moved to the end of the
string always or never respectively. Any other string is
treated as match.
unambiguous
This key is read-only and will always be set to the com‐
mon (unambiguous) prefix the completion code has gener‐
ated for all matches added so far.
unambiguous_cursor
This gives the position the cursor would be placed at if
the common prefix in the unambiguous key were inserted,
relative to the value of that key. The cursor would be
placed before the character whose index is given by this
key.
unambiguous_positions
This contains all positions where characters in the unam‐
biguous string are missing or where the character
inserted differs from at least one of the matches. The
positions are given as indexes into the string given by
the value of the unambiguous key.
vared If completion is called while editing a line using the
vared builtin, the value of this key is set to the name
of the parameter given as an argument to vared. This key
is only set while a vared command is active.
words This array contains the words present on the command line cur‐
rently being edited.
BUILTIN COMMANDS
compadd [ -akqQfenUl12C ] [ -F array ]
[ -P prefix ] [ -S suffix ]
[ -p hidden-prefix ] [ -s hidden-suffix ]
[ -i ignored-prefix ] [ -I ignored-suffix ]
[ -W file-prefix ] [ -d array ]
[ -J name ] [ -V name ] [ -X explanation ] [ -x message ]
[ -r remove-chars ] [ -R remove-func ]
[ -D array ] [ -O array ] [ -A array ]
[ -M match-spec ] [ -- ] [ words ... ]
This builtin command can be used to add matches directly and
control all the information the completion code stores with each
possible match. The return value is zero if at least one match
was added and non-zero if no matches were added.
The completion code breaks the string to complete into seven
fields in the order:
<ipre><apre><hpre><word><hsuf><asuf><isuf>
The first field is an ignored prefix taken from the command
line, the contents of the IPREFIX parameter plus the string
given with the -i option. With the -U option, only the string
from the -i option is used. The field <apre> is an optional pre‐
fix string given with the -P option. The <hpre> field is a
string that is considered part of the match but that should not
be shown when listing completions, given with the -p option; for
example, functions that do filename generation might specify a
common path prefix this way. <word> is the part of the match
that should appear in the list of completions, i.e. one of the
words given at the end of the compadd command line. The suffixes
<hsuf>, <asuf> and <isuf> correspond to the prefixes <hpre>,
<apre> and <ipre> and are given by the options -s, -S and -I,
respectively.
The supported flags are:
-P prefix
This gives a string to be inserted before the given
words. The string given is not considered as part of the
match and any shell metacharacters in it will not be
quoted when the string is inserted.
-S suffix
Like -P, but gives a string to be inserted after the
match.
-p hidden-prefix
This gives a string that should be inserted into the com‐
mand line before the match but that should not appear in
the list of matches. Unless the -U option is given, this
string must be matched as part of the string on the com‐
mand line.
-s hidden-suffix
Like `-p', but gives a string to insert after the match.
-i ignored-prefix
This gives a string to insert into the command line just
before any string given with the `-P' option. Without
`-P' the string is inserted before the string given with
`-p' or directly before the match.
-I ignored-suffix
Like -i, but gives an ignored suffix.
-a With this flag the words are taken as names of arrays and
the possible matches are their values. If only some ele‐
ments of the arrays are needed, the words may also con‐
tain subscripts, as in `foo[2,-1]'.
-k With this flag the words are taken as names of associa‐
tive arrays and the possible matches are their keys. As
for -a, the words may also contain subscripts, as in
`foo[(R)*bar*]'.
-d array
This adds per-match display strings. The array should
contain one element per word given. The completion code
will then display the first element instead of the first
word, and so on. The array may be given as the name of an
array parameter or directly as a space-separated list of
words in parentheses.
If there are fewer display strings than words, the left‐
over words will be displayed unchanged and if there are
more display strings than words, the leftover display
strings will be silently ignored.
-l This option only has an effect if used together with the
-d option. If it is given, the display strings are listed
one per line, not arrayed in columns.
-J name
Gives the name of the group of matches the words should
be stored in.
-V name
Like -J but naming a unsorted group. These are in a dif‐
ferent name space than groups created with the -J flag.
-1 If given together with the -V option, makes only consecu‐
tive duplicates in the group be removed. If combined with
the -J option, this has no visible effect. Note that
groups with and without this flag are in different name
spaces.
-2 If given together with the -J or -V option, makes all
duplicates be kept. Again, groups with and without this
flag are in different name spaces.
-X explanation
The explanation string will be printed with the list of
matches, above the group currently selected.
-x message
Like -X, but the message will be printed even if there
are no matches in the group.
-q The suffix given with -S will be automatically removed if
the next character typed is a blank or does not insert
anything, or if the suffix consists of only one character
and the next character typed is the same character.
-r remove-chars
This is a more versatile form of the -q option. The suf‐
fix given with -S or the slash automatically added after
completing directories will be automatically removed if
the next character typed inserts one of the characters
given in the remove-chars. This string is parsed as a
characters class and understands the backslash sequences
used by the print command. For example, `-r "a-z\t"'
removes the suffix if the next character typed inserts a
lowercase character or a TAB, and `-r "^0-9"' removes the
suffix if the next character typed inserts anything but a
digit. One extra backslash sequence is understood in this
string: `\-' stands for all characters that insert noth‐
ing. Thus `-S "=" -q' is the same as `-S "=" -r "=
\t\n\-"'.
-R remove-func
This is another form of the -r option. When a suffix has
been inserted and the completion accepted, the function
remove-func will be called after the next character
typed. It is passed the length of the suffix as an argu‐
ment and can use the special parameters available in
ordinary (non-completion) zle widgets (see zshzle(1)) to
analyse and modify the command line.
-f If this flag is given, all of the matches built from
words are marked as being the names of files. They are
not required to be actual filenames, but if they are, and
the option LIST_TYPES is set, the characters describing
the types of the files in the completion lists will be
shown. This also forces a slash to be added when the name
of a directory is completed.
-e This flag can be used to tell the completion code that
the matches added are parameter names for a parameter
expansion. This will make the AUTO_PARAM_SLASH and
AUTO_PARAM_KEYS options be used for the matches.
-W file-prefix
This string is a pathname that will be prepended to each
of the matches formed by the given words together with
any prefix specified by the -p option to form a complete
filename for testing. Hence it is only useful if com‐
bined with the -f flag, as the tests will not otherwise
be performed.
-F array
Specifies an array containing patterns. Words matching
one of these patterns are ignored, i.e. not considered to
be possible matches.
The array may be the name of an array parameter or a list
of literal patterns enclosed in parentheses and quoted,
as in `-F "(*?.o *?.h)"'. If the name of an array is
given, the elements of the array are taken as the pat‐
terns.
-Q This flag instructs the completion code not to quote any
metacharacters in the words when inserting them into the
command line.
-M match-spec
This gives local match specifications as described below
in the section `Matching Control'. This option may be
given more than once. In this case all match-specs given
are concatenated with spaces between them to form the
specification string to use. Note that they will only be
used if the -U option is not given.
-n Specifies that the words added are to be used as possible
matches, but are not to appear in the completion listing.
-U If this flag is given, all words given will be accepted
and no matching will be done by the completion code. Nor‐
mally this is used in functions that do the matching
themselves.
-O array
If this option is given, the words are not added to the
set of possible completions. Instead, matching is done
as usual and all of the words given as arguments that
match the string on the command line will be stored in
the array parameter whose name is given as array.
-A array
As the -O option, except that instead of those of the
words which match being stored in array, the strings gen‐
erated internally by the completion code are stored. For
example, with a matching specification of `-M "L:|no="',
the string `nof' on the command line and the string `foo'
as one of the words, this option stores the string
`nofoo' in the array, whereas the -O option stores the
`foo' originally given.
-D array
As with -O, the words are not added to the set of possi‐
ble completions. Instead, the completion code tests
whether each word in turn matches what is on the line.
If the n'th word does not match, the n'th element of the
array is removed. Elements for which the corresponding
word is matched are retained.
-C This option adds a special match which expands to all
other matches when inserted into the line, even those
that are added after this option is used. Together with
the -d option it is possible to specify a string that
should be displayed in the list for this special match.
If no string is given, it will be shown as a string con‐
taining the strings that would be inserted for the other
matches, truncated to the width of the screen.
-
-- This flag ends the list of flags and options. All argu‐
ments after it will be taken as the words to use as
matches even if they begin with hyphens.
Except for the -M flag, if any of these flags is given more than
once, the first one (and its argument) will be used.
compset -p number
compset -P [ number ] pattern
compset -s number
compset -S [ number ] pattern
compset -n begin [ end ]
compset -N beg-pat [ end-pat ]
compset -q
This command simplifies modification of the special parameters,
while its return value allows tests on them to be carried out.
The options are:
-p number
If the contents of the PREFIX parameter is longer than
number characters, the first number characters are
removed from it and appended to the contents of the
IPREFIX parameter.
-P [ number ] pattern
If the value of the PREFIX parameter begins with anything
that matches the pattern, the matched portion is removed
from PREFIX and appended to IPREFIX.
Without the optional number, the longest match is taken,
but if number is given, anything up to the number'th
match is moved. If the number is negative, the number'th
longest match is moved. For example, if PREFIX contains
the string `a=b=c', then compset -P '*\=' will move the
string `a=b=' into the IPREFIX parameter, but compset -P
1 '*\=' will move only the string `a='.
-s number
As -p, but transfer the last number characters from the
value of SUFFIX to the front of the value of ISUFFIX.
-S [ number ] pattern
As -P, but match the last portion of SUFFIX and transfer
the matched portion to the front of the value of ISUFFIX.
-n begin [ end ]
If the current word position as specified by the parame‐
ter CURRENT is greater than or equal to begin, anything
up to the begin'th word is removed from the words array
and the value of the parameter CURRENT is decremented by
begin.
If the optional end is given, the modification is done
only if the current word position is also less than or
equal to end. In this case, the words from position end
onwards are also removed from the words array.
Both begin and end may be negative to count backwards
from the last element of the words array.
-N beg-pat [ end-pat ]
If one of the elements of the words array before the one
at the index given by the value of the parameter CURRENT
matches the pattern beg-pat, all elements up to and
including the matching one are removed from the words
array and the value of CURRENT is changed to point to the
same word in the changed array.
If the optional pattern end-pat is also given, and there
is an element in the words array matching this pattern,
the parameters are modified only if the index of this
word is higher than the one given by the CURRENT parame‐
ter (so that the matching word has to be after the cur‐
sor). In this case, the words starting with the one
matching end-pat are also removed from the words array.
If words contains no word matching end-pat, the testing
and modification is performed as if it were not given.
-q The word currently being completed is split on spaces
into separate words, respecting the usual shell quoting
conventions. The resulting words are stored in the words
array, and CURRENT, PREFIX, SUFFIX, QIPREFIX, and QISUF‐
FIX are modified to reflect the word part that is com‐
pleted.
In all the above cases the return value is zero if the test suc‐
ceeded and the parameters were modified and non-zero otherwise.
This allows one to use this builtin in tests such as:
if compset -P '*\='; then ...
This forces anything up to and including the last equal sign to
be ignored by the completion code.
compcall [ -TD ]
This allows the use of completions defined with the compctl
builtin from within completion widgets. The list of matches
will be generated as if one of the non-widget completion func‐
tion (complete-word, etc.) had been called, except that only
compctls given for specific commands are used. To force the code
to try completions defined with the -T option of compctl and/or
the default completion (whether defined by compctl -D or the
builtin default) in the appropriate places, the -T and/or -D
flags can be passed to compcall.
The return value can be used to test if a matching compctl defi‐
nition was found. It is non-zero if a compctl was found and zero
otherwise.
Note that this builtin is defined by the zsh/compctl module.
CONDITION CODES
The following additional condition codes for use within the [[ ... ]]
construct are available in completion widgets. These work on the spe‐
cial parameters. All of these tests can also be performed by the
compset builtin, but in the case of the condition codes the contents of
the special parameters are not modified.
-prefix [ number ] pattern
true if the test for the -P option of compset would succeed.
-suffix [ number ] pattern
true if the test for the -S option of compset would succeed.
-after beg-pat
true if the test of the -N option with only the beg-pat given
would succeed.
-between beg-pat end-pat
true if the test for the -N option with both patterns would suc‐
ceed.
MATCHING CONTROL
It is possible by use of the -M option of the compadd builtin command
to specify how the characters in the string to be completed (referred
to here as the command line) map onto the characters in the list of
matches produced by the completion code (referred to here as the trial
completions). Note that this is not used if the command line contains a
glob pattern and the GLOB_COMPLETE option is set or the pattern_match
of the compstate special association is set to a non-empty string.
The match-spec given as the argument to the -M option (see `Builtin
Commands' above) consists of one or more matching descriptions sepa‐
rated by whitespace. Each description consists of a letter followed by
a colon and then the patterns describing which character sequences on
the line match which character sequences in the trial completion. Any
sequence of characters not handled in this fashion must match exactly,
as usual.
The forms of match-spec understood are as follows. In each case, the
form with an uppercase initial character retains the string already
typed on the command line as the final result of completion, while with
a lowercase initial character the string on the command line is changed
into the corresponding part of the trial completion.
m:lpat=tpat
M:lpat=tpat
Here, lpat is a pattern that matches on the command line, corre‐
sponding to tpat which matches in the trial completion.
l:lanchor|lpat=tpat
L:lanchor|lpat=tpat
l:lanchor||ranchor=tpat
L:lanchor||ranchor=tpat
b:lpat=tpat
B:lpat=tpat
These letters are for patterns that are anchored by another pat‐
tern on the left side. Matching for lpat and tpat is as for m
and M, but the pattern lpat matched on the command line must be
preceded by the pattern lanchor. The lanchor can be blank to
anchor the match to the start of the command line string; other‐
wise the anchor can occur anywhere, but must match in both the
command line and trial completion strings.
If no lpat is given but a ranchor is, this matches the gap
between substrings matched by lanchor and ranchor. Unlike lan‐
chor, the ranchor only needs to match the trial completion
string.
The b and B forms are similar to l and L with an empty anchor,
but need to match only the beginning of the trial completion or
the word on the command line, respectively.
r:lpat|ranchor=tpat
R:lpat|ranchor=tpat
r:lanchor||ranchor=tpat
R:lanchor||ranchor=tpat
e:lpat=tpat
E:lpat=tpat
As l, L, b and B, with the difference that the command line and
trial completion patterns are anchored on the right side. Here
an empty ranchor and the e and E forms force the match to the
end of the trial completion or command line string.
Each lpat, tpat or anchor is either an empty string or consists of a
sequence of literal characters (which may be quoted with a backslash),
question marks, character classes, and correspondence classes; ordinary
shell patterns are not used. Literal characters match only themselves,
question marks match any character, and character classes are formed as
for globbing and match any character in the given set.
Correspondence classes are defined like character classes, but with two
differences: they are delimited by a pair of braces, and negated
classes are not allowed, so the characters ! and ^ have no special
meaning directly after the opening brace. They indicate that a range
of characters on the line match a range of characters in the trial com‐
pletion, but (unlike ordinary character classes) paired according to
the corresponding position in the sequence. For example, to make any
lowercase letter on the line match the corresponding uppercase letter
in the trial completion, you can use `m:{a-z}={A-Z}'. More than one
pair of classes can occur, in which case the first class before the =
corresponds to the first after it, and so on. If one side has more
such classes than the other side, the superfluous classes behave like
normal character classes. In anchor patterns correspondence classes
also behave like normal character classes.
The pattern tpat may also be one or two stars, `*' or `**'. This means
that the pattern on the command line can match any number of characters
in the trial completion. In this case the pattern must be anchored (on
either side); in the case of a single star, the anchor then determines
how much of the trial completion is to be included --- only the charac‐
ters up to the next appearance of the anchor will be matched. With two
stars, substrings matched by the anchor can be matched, too.
Examples:
The keys of the options association defined by the parameter module are
the option names in all-lowercase form, without underscores, and with‐
out the optional no at the beginning even though the builtins setopt
and unsetopt understand option names with uppercase letters, under‐
scores, and the optional no. The following alters the matching rules
so that the prefix no and any underscore are ignored when trying to
match the trial completions generated and uppercase letters on the line
match the corresponding lowercase letters in the words:
compadd -M 'L:|[nN][oO]= M:_= M:{A-Z}={a-z}' - \
${(k)options}
The first part says that the pattern `[nN][oO]' at the beginning (the
empty anchor before the pipe symbol) of the string on the line matches
the empty string in the list of words generated by completion, so it
will be ignored if present. The second part does the same for an under‐
score anywhere in the command line string, and the third part uses cor‐
respondence classes so that any uppercase letter on the line matches
the corresponding lowercase letter in the word. The use of the upper‐
case forms of the specification characters (L and M) guarantees that
what has already been typed on the command line (in particular the pre‐
fix no) will not be deleted.
Note that the use of L in the first part means that it matches only
when at the beginning of both the command line string and the trial
completion. I.e., the string `_NO_f' would not be completed to
`_NO_foo', nor would `NONO_f' be completed to `NONO_foo' because of the
leading underscore or the second `NO' on the line which makes the pat‐
tern fail even though they are otherwise ignored. To fix this, one
would use `B:[nN][oO]=' instead of the first part. As described above,
this matches at the beginning of the trial completion, independent of
other characters or substrings at the beginning of the command line
word which are ignored by the same or other match-specs.
The second example makes completion case insensitive. This is just the
same as in the option example, except here we wish to retain the char‐
acters in the list of completions:
compadd -M 'm:{a-z}={A-Z}' ...
This makes lowercase letters match their uppercase counterparts. To
make uppercase letters match the lowercase forms as well:
compadd -M 'm:{a-zA-Z}={A-Za-z}' ...
A nice example for the use of * patterns is partial word completion.
Sometimes you would like to make strings like `c.s.u' complete to
strings like `comp.source.unix', i.e. the word on the command line con‐
sists of multiple parts, separated by a dot in this example, where each
part should be completed separately --- note, however, that the case
where each part of the word, i.e. `comp', `source' and `unix' in this
example, is to be completed from separate sets of matches is a differ‐
ent problem to be solved by the implementation of the completion wid‐
get. The example can be handled by:
compadd -M 'r:|.=* r:|=*' \
- comp.sources.unix comp.sources.misc ...
The first specification says that lpat is the empty string, while
anchor is a dot; tpat is *, so this can match anything except for the
`.' from the anchor in the trial completion word. So in `c.s.u', the
matcher sees `c', followed by the empty string, followed by the anchor
`.', and likewise for the second dot, and replaces the empty strings
before the anchors, giving `c[omp].s[ources].u[nix]', where the last
part of the completion is just as normal.
With the pattern shown above, the string `c.u' could not be completed
to `comp.sources.unix' because the single star means that no dot
(matched by the anchor) can be skipped. By using two stars as in
`r:|.=**', however, `c.u' could be completed to `comp.sources.unix'.
This also shows that in some cases, especially if the anchor is a real
pattern, like a character class, the form with two stars may result in
more matches than one would like.
The second specification is needed to make this work when the cursor is
in the middle of the string on the command line and the option COM‐
PLETE_IN_WORD is set. In this case the completion code would normally
try to match trial completions that end with the string as typed so
far, i.e. it will only insert new characters at the cursor position
rather then at the end. However in our example we would like the code
to recognise matches which contain extra characters after the string on
the line (the `nix' in the example). Hence we say that the empty
string at the end of the string on the line matches any characters at
the end of the trial completion.
More generally, the specification
compadd -M 'r:|[.,_-]=* r:|=*' ...
allows one to complete words with abbreviations before any of the char‐
acters in the square brackets. For example, to complete veryverylong‐
file.c rather than veryverylongheader.h with the above in effect, you
can just type very.c before attempting completion.
The specifications with both a left and a right anchor are useful to
complete partial words whose parts are not separated by some special
character. For example, in some places strings have to be completed
that are formed `LikeThis' (i.e. the separate parts are determined by a
leading uppercase letter) or maybe one has to complete strings with
trailing numbers. Here one could use the simple form with only one
anchor as in:
compadd -M 'r:|[A-Z0-9]=* r:|=*' LikeTHIS FooHoo 5foo123 5bar234
But with this, the string `H' would neither complete to `FooHoo' nor to
`LikeTHIS' because in each case there is an uppercase letter before the
`H' and that is matched by the anchor. Likewise, a `2' would not be
completed. In both cases this could be changed by using
`r:|[A-Z0-9]=**', but then `H' completes to both `LikeTHIS' and
`FooHoo' and a `2' matches the other strings because characters can be
inserted before every uppercase letter and digit. To avoid this one
would use:
compadd -M 'r:[^A-Z0-9]||[A-Z0-9]=** r:|=*' \
LikeTHIS FooHoo foo123 bar234
By using these two anchors, a `H' matches only uppercase `H's that are
immediately preceded by something matching the left anchor `[^A-Z0-9]'.
The effect is, of course, that `H' matches only the string `FooHoo', a
`2' matches only `bar234' and so on.
When using the completion system (see zshcompsys(1)), users can define
match specifications that are to be used for specific contexts by using
the matcher and matcher-list styles. The values for the latter will be
used everywhere.
COMPLETION WIDGET EXAMPLE
The first step is to define the widget:
zle -C complete complete-word complete-files
Then the widget can be bound to a key using the bindkey builtin com‐
mand:
bindkey '^X\t' complete
After that the shell function complete-files will be invoked after typ‐
ing control-X and TAB. The function should then generate the matches,
e.g.:
complete-files () { compadd - * }
This function will complete files in the current directory matching the
current word.
ZSHCOMPSYS(1)ZSHCOMPSYS(1)NAME
zshcompsys - zsh completion system
DESCRIPTION
This describes the shell code for the new completion system. It con‐
sists of various shell functions; those beginning `comp' are to be
called directly by the user, while those beginning `_' are called by
the completion code. The shell functions of the second set which
implement completion behaviour and which may be bound to keystrokes,
are referred to as `widgets'.
INITIALIZATION
If the system was installed completely, it should be enough to call the
shell function compinit from your initialization file; see the next
section. However, the function compinstall can be run by a user to
configure various aspects of the completion system.
Usually, compinstall will insert code into .zshrc, although if that is
not writable it will save it in another file and tell you that file's
location. Note that it is up to you to make sure that the lines added
to .zshrc are actually run; you may, for example, need to move them to
an earlier place in the file if .zshrc usually returns early. So long
as you keep them all together (including the comment lines at the start
and finish), you can rerun compinstall and it will correctly locate and
modify these lines. Note, however, that any code you add to this sec‐
tion by hand is likely to be lost if you rerun compinstall, although
lines using the command `zstyle' should be gracefully handled.
The new code will take effect next time you start the shell, or run
.zshrc by hand; there is also an option to make them take effect imme‐
diately. However, if compinstall has removed definitions, you will
need to restart the shell to see the changes.
To run compinstall you will need to make sure it is in a directory men‐
tioned in your fpath parameter, which should already be the case if zsh
was properly configured as long as your startup files do not remove the
appropriate directories from fpath. Then it must be autoloaded
(`autoload -U compinstall' is recommended). You can abort the instal‐
lation any time you are being prompted for information, and your .zshrc
will not be altered at all; changes only take place right at the end,
where you are specifically asked for confirmation.
Use of compinit
This section describes the use of compinit to initialize completion for
the current session when run directly by the user; if you have run
compinstall it will be called automatically from your .zshrc.
To initialize the system, the function compinit should be in a direc‐
tory mentioned in the fpath parameter, and should be autoloaded
(`autoload -U compinit' is recommended), and then run simply as
`compinit'. This will define a few utility functions, arrange for all
the necessary shell functions to be autoloaded, and will then re-define
all widgets that do completion to use the new system. If you use the
menu-select widget, which is part of the zsh/complist module, you
should make sure that that module is loaded before the call to compinit
so that that widget is also re-defined. If completion styles (see
below) are set up to perform expansion as well as completion by
default, and the TAB key is bound to expand-or-complete, compinit will
rebind it to complete-word; this is necessary to use the correct form
of expansion.
Should you need to use the original completion commands, you can still
bind keys to the old widgets by putting a `.' in front of the widget
name, e.g. `.expand-or-complete'.
To speed up the running of compinit, it can be made to produce a dumped
configuration which will be read in on future invocations; this is the
default, although it can be turned off by calling compinit with the
option -D. The dumped file is .zcompdump in the same directory as the
startup files (i.e. $ZDOTDIR or $HOME); alternatively, an explicit file
name can be given by `compinit -d dumpfile'. On the next call to
compinit, it will read the dumped file instead of performing a full
initialization.
If the number of completion files changes, compinit will recognise this
and produce a new dump file. However, if the name of a function or the
arguments in the first line of a #compdef function (as described below)
change, it is easiest to delete the dump file by hand so that compinit
will re-create it the next time it is run. The check performed to see
if there are new functions can be omitted by giving the option -C. In
this case the dump file will only be created if there isn't one
already.
The dumping is actually done by another function, compdump, but you
will only need to run this yourself if you change the configuration
(e.g. using compdef) and then want to dump the new one. The name of
the old dumped file will be remembered for this purpose.
If the parameter _compdir is set, compinit uses it as a directory where
completion functions can be found; this is only necessary if they are
not already in the function search path.
For security reasons compinit also checks if the completion system
would use files not owned by root or by the current user, or files in
directories that are world- or group-writable or that are not owned by
root or by the current user. If such files or directories are found,
compinit will ask if the completion system should really be used. To
avoid these tests and make all files found be used without asking, use
the option -u, and to make compinit silently ignore all insecure files
and directories use the option -i. This security check is skipped
entirely when the -C option is given.
The security check can be retried at any time by running the function
compaudit. This is the same check used by compinit, but when it is
executed directly any changes to fpath are made local to the function
so they do not persist. The directories to be checked may be passed as
arguments; if none are given, compaudit uses fpath and _compdir to find
completion system directories, adding missing ones to fpath as neces‐
sary. To force a check of exactly the directories currently named in
fpath, set _compdir to an empty string before calling compaudit or
compinit.
Autoloaded files
The convention for autoloaded functions used in completion is that they
start with an underscore; as already mentioned, the fpath/FPATH parame‐
ter must contain the directory in which they are stored. If zsh was
properly installed on your system, then fpath/FPATH automatically con‐
tains the required directories for the standard functions.
For incomplete installations, if compinit does not find enough files
beginning with an underscore (fewer than twenty) in the search path, it
will try to find more by adding the directory _compdir to the search
path. If that directory has a subdirectory named Base, all subdirecto‐
ries will be added to the path. Furthermore, if the subdirectory Base
has a subdirectory named Core, compinit will add all subdirectories of
the subdirectories is to the path: this allows the functions to be in
the same format as in the zsh source distribution.
When compinit is run, it searches all such files accessible via
fpath/FPATH and reads the first line of each of them. This line should
contain one of the tags described below. Files whose first line does
not start with one of these tags are not considered to be part of the
completion system and will not be treated specially.
The tags are:
#compdef names...
The file will be made autoloadable and the function defined in
it will be called when completing names, each of which is either
the name of a command whose arguments are to be completed or one
of a number of special contexts in the form -context- described
below for the _complete function.
Each name may also be of the form `cmd=service'. This is used
by functions that offer multiple services, i.e. different com‐
pletion behaviour for multiple commands. Such a string makes
the completion system call the function when completing argu‐
ments for the command `cmd', setting the parameter $service to
the string `service'. The function can then use that parameter
to decide what to complete.
#compdef -p pattern
The file will be made autoloadable and the function defined in
it will be called when completing for a command whose name
matches the given pattern (a standard globbing pattern). Note
that only one pattern may be given.
#compdef -P pattern
Like the previous one, but the function will be called only if
no completion function for the command on the line could be
found.
#compdef -k style key-sequences...
This can be used to bind special completion functions to the
key-sequences specified. It creates a widget behaving like the
builtin widget style, which must be one of those that perform
completion, namely complete-word, delete-char-or-list,
expand-or-complete, expand-or-complete-prefix, list-choices,
menu-complete, menu-expand-or-complete, or reverse-menu-com‐
plete. If the zsh/complist module is loaded (see zshmod‐
ules(1)), the same happens to the menu-select widget.
The widget is then bound to all the key-sequences given, if any:
when one of the key-sequences is typed, the function in the file
will be invoked to generate the matches. Note that a key will
not be re-bound if if it already was (that is, was bound to
something other than undefined-key). The widget created has the
same name as the file and can be bound to any other keys using
bindkey as usual.
#compdef -K widget-name style key-sequences ...
This is similar to -k, with the same style and key-sequences
arguments, preceded by a string giving the name of a widget. In
this case only one key-sequences argument may be given, but the
entire set of three arguments may be repeated with a different
set of arguments. In particular, the widget-name must be dis‐
tinct in each set. It should begin with `_', else one will be
added, and should not clash with the name of any existing wid‐
get: names based on the name of the function are most useful.
For example,
#compdef -K _foo_complete complete-word "^X^C" \
_foo_list list-choices "^X^D"
(all on one line) defines a widget _foo_complete for completion,
bound to `^X^C', and a widget _foo_list for listing, bound to
`^X^D'.
#autoload [ options ]
This is used for files defining utility functions that are not
to be called directly as completion functions but should be
loaded automatically when invoked. Typically they are to be
called from within one of the completion functions.
The options will be given to the autoload builtin command when
making the function autoloaded. Most often, this will be +X to
force the function to be loaded immediately. Note that the -U
flag is always implicitly added.
The # is part of the tag name and no white space is allowed after it.
The #compdef tags use the compdef function described below; the main
difference is that the name of the function is supplied implicitly.
Note also that the functions for the completion system assume that the
KSH_AUTOLOAD option is not set and cannot be loaded when it is set. To
avoid having to unset KSH_AUTOLOAD, you can instead use one or more zwc
file(s) which have been created with the command zcompile -z to load
the functions for the completion system; see zshbuiltins(1). This
forces the functions to be autoloaded the way zsh normally loads func‐
tions.
Functions
The compinit file defines the following function, which may also be
called directly by the user.
compdef [ -an ] function names...
compdef -d names...
compdef -p [ -a ] function pattern
compdef -P [ -a ] function pattern
compdef -k [ -an ] function style key-sequences...
compdef -K [ -an ] function name style key-sequences ...
The first form tells the completion system to call the given
function when completing for the contexts or commands whose
names are given: this is like the #compdef tag unless the first
word contains an equal sign. In this case all words have to be
of the form `cmd=service' where service is the name of a command
or of a service defined by an autoloaded function with the #com‐
pdef tag and an argument of the form `cmd=service'. This kind
of use makes the arguments of the cmds be completed as those for
the services.
If the -n option is given, any existing completion behaviour for
particular contexts or commands will not be altered. These def‐
initions can be deleted by giving the -d option as in the second
form.
The form with -p is similar to the first, but function will be
called for all commands whose name matches the pattern; this is
like the #compdef -p function tag.
The form with -P is like the third, but the function will be
called only if no function for the command itself was found or
if one was found and it set the _compskip parameter to a value
not containing the substring patterns.
The form with -k defines a widget with the same name as the
function which will be called for each of the key-sequences;
this is like the #compdef -k tag. The function should generate
the completions needed and will otherwise behave like the
builtin widget whose name is given as the style argument. The
widgets usable for this are: complete-word, delete-char-or-list,
expand-or-complete, expand-or-complete-prefix, list-choices,
menu-complete, menu-expand-or-complete, and reverse-menu-com‐
plete, as well as menu-select if the zsh/complist module is
loaded. The option -n prevents the key being bound if it is
already to bound to something other than undefined-key.
The form with -K is similar and defines multiple widgets based
on the same function, each of which requires the set of three
arguments name, style and key-sequences, where the latter two
are as for -k and the first must be a unique widget name begin‐
ning with an underscore.
In each of the forms supporting it the -a option makes the func‐
tion autoloadable (exactly equivalent to autoload -U function).
The compdef function is the place to turn to when one wants to define
what the completion system should complete for a certain command. The
function named can of course be one of the functions supplied or one
written by the user. For example, if one has a command foo that gets
process identifiers as arguments, one could do:
compdef _pids foo
using the _pids function from the distribution to generate the process
identifiers. Not also the _gnu_generic function described below, which
can be used to complete options for commands that understand the
`--help' option.
COMPLETION SYSTEM CONFIGURATION
This section gives a short overview of how the completion system works,
and then more detail on how users can configure how and when matches
are generated.
Overview
When completion is attempted somewhere on a command line the completion
system first tries to find out the context where completion was tried.
The context depends on such things as the name of the command when com‐
pleting an argument, and possibly also the name of an option when com‐
pleting an argument to that option.
The `context' of a completion is a string consisting of multiple
fields. This is used to look up styles that can be used to configure
the completion system. Since it is not possible to build the whole
context string in advance, completion functions may modify some of the
fields and hence the context used for lookup may vary during the same
call to the completion system.
The context string always consists of the following fields, separated
by colons and with a leading colon before the first:
· The literal string completion, saying that this style is used by
the completion system.
· The function; in many cases this field will be blank, but when
the completion system is called from other functions, like pre‐
dict-on or one of the functions in the Command directory of the
distribution, this field contains the name of that function,
often in an abbreviated form.
· The completer currently active, which is the name of the func‐
tion without the leading underscore. A `completer' is in over‐
all control of how completion is to be performed; `complete' is
the basic one for ordinary completion, but completers may per‐
form various related tasks such as correction, or modify the be‐
haviour of a later completer (see the section `Control Func‐
tions' below for more information).
· The context or command. This is either one of the special con‐
text names such as -condition- as explained for the _complete
completer below, or the name of the command we are completing
arguments for. Completion functions for commands that have
sub-commands usually modify this field to contain the name of
the command followed by a minus sign and the sub-command (e.g.
the completion function for the cvs command sets this field to
strings such as cvs-add when completing for the add sub-com‐
mand).
· The argument, describing which argument we are completing. Nor‐
mally this is either a string of the form argument-n, where n is
the number of the argument or it is a string of the form
option-opt-n when completing the n'th argument of the option
opt.
· The tag. Tags are used to discriminate between the types of
matches a completion function can generate in a certain context.
As an example, the context name
:completion::complete:dvips:option-o-1:files
says that normal completion was attempted on an argument of the dvips
command (more precisely: completion was attempted on the first argument
after the -o option) and the completion function will generate file‐
names for this context.
In many of the possible contexts the completion system can generate
matches, often multiple types of matches. These types are represented
as simple names called `tags'. The completion system will decide
internally what sort of tags are allowed; a list of the standard possi‐
bilities is given below. To determine in which order the tags are to
be used by the completion function, the `tag-order' style for the
appropriate context may be set, as described in the list of standard
styles below. Only those types of matches whose tags were selected by
this style will be produced, and in the order given, although the
default is to try all relevant tags in an order determined by the par‐
ticular completion in use.
The _complete_help bindable command described in the section `Bindable
Commands' below can be invoked to find out the context and tag names
and styles used at a particular point in completion. It shows the list
of contexts and tags that would be used in if completion were tried at
the current cursor position. Hence one can easily find out all the
information needed to change the behaviour of the tag-order style for a
particular context.
Completion behaviour can be modified by various other styles defined
with the zstyle builtin command (see zshmodules(1)). When looking up
styles the completion system uses full context names, including the
tag.
Styles determine such things as how the matches are generated; some of
them correspond to shell options (for example, the use of menu comple‐
tion), but styles provide more specific control. They can have any
number of strings as their value. Looking up the value of a style
therefore consists of two things: the context, which may be matched as
a pattern, and the name of the style itself, which must be given
exactly.
For example, many completion functions can generate matches in a simple
and a verbose form and use the verbose style to decide which form
should be used. To make all such functions use the verbose form, put
zstyle ':completion:*' verbose yes
in one of the startup files like .zshrc; this sort of style can also be
configured with the compinstall function. This definition simply means
that the verbose style has yes as its value in every context inside the
completion system. If the context pattern were `*', the verbose style
would have this value anywhere the style mechanism is used, not just in
completion.
As a more specific example, the completion function for the kill
builtin command uses the verbose style to decide if jobs and processes
are listed only as job numbers and process identifiers or if they are
listed with the full job texts and the command lines of the processes
(the latter is achieved by calling the ps command). To make this
builtin list the matches only as numbers one could call:
zstyle ':completion:*:*:kill:*' verbose no
Furthermore, if one wanted to see the command lines for processes but
not the job texts one could use the fact that the context name contains
the tag name when styles are looked up. As the function for the kill
builtin command uses the tags jobs and processes, we can use:
zstyle ':completion:*:*:kill:*:jobs' verbose no
To have more control over when certain values for styles are used one
can use the special parameters available in completion widgets (see see
zshcompwid(1))) and the -e option to zstyle that makes the value be
evaluated when looked up. For example, to make the completer style
have a different value when completing for the cvs command, one could
use the words special array:
zstyle -e ':completion:*' completer '
if [[ $words[1] = cvs ]]; then
reply=(_complete)
else
reply=(_complete _approximate)
fi'
One should be careful not to use too complicated code with this option,
at least for the styles that are looked up quite often. These are
basically those that define some global completion behaviour but allow
that to be different for all matches or groups of matches (such as the
menu and list-rows-first styles). Alternatively one can always use a
less general pattern for the context than in the example above and use
a second call to zstyle with a generic pattern and without using the -e
option to define the default behaviour.
Note that the order in which styles are defined does not matter; the
style mechanism uses the most specific possible match for a particular
style to determine the set of values. More precisely, strings are pre‐
ferred over patterns (for example, `:completion::complete:foo' is more
specific than `:completion::complete:*'), and longer patterns are pre‐
ferred over shorter patterns.
As with tags, completion functions can use any style they choose, so
there can't be a complete list. However, the following two sections
list those tags and styles that are used in many places of the comple‐
tion system.
Standard Tags
Here are the tags currently used by the completion system. Some of
them are only used when looking up styles and do not refer to a partic‐
ular type of match.
accounts
used to look up the users-hosts style
all-expansions
used by the _expand completer when adding the single string con‐
taining all possible expansions
all-files
for the names of all files (as distinct from a particular sub‐
set, see the globbed-files tag).
arguments
when an argument of a command may be completed
arrays for names of array parameters
association-keys
for keys of associative arrays; used when completing inside a
subscript of a parameter of this type
bookmarks
when completing bookmarks (e.g. for URLs and the zftp function
suite)
builtins
for names of builtin commands
characters
used for commands like stty when completing characters; also
used when completing character classes after a opening bracket
colormapids
for X colormap ids
colors for color names
commands
for names of external commands and names of sub-commands (used
by some commands like cvs)
contexts
for contexts used by the zstyle builtin command
corrections
used by the _approximate and _correct completers for the possi‐
ble corrections
cursors
for cursor names used by X programs
default
used to look up default values for various styles that may also
be set for tags that are used when generating matches; note that
this tag is used when only the function field of the context
name is set up
descriptions
used when looking up the value of the format style for descrip‐
tions
devices
for names of device special files
directories
for names of directories
directory-stack
for entries in the directory stack
displays
for X display names
domains
for network domains
expansions
used by the _expand completer for individual possibilities
resulting from expansion of a word
extensions
for X server extensions
file-descriptors
for the numbers of open file descriptors
files the generic file-matching tag used by completion functions that
can complete the names of some kind of file
fonts used for X font names
functions
names of functions, normally shell functions although certain
commands may understand other kinds of function
globbed-files
for names of files matching the glob pattern used by completion
functions that expect a certain type of file
groups used when completing names of user groups
history-words
for words from the history
hosts for hostnames
indexes
used for array indexes
jobs used for jobs
keymaps
for names of zsh keymaps
keysyms
for names of X keysyms
libraries
for names of system libraries
limits for system limits
local-directories
for names of directories which are subdirectories of the current
working directory when completing for the cd and related builtin
commands
manuals
for names of manual pages
maps for map names (e.g. NIS maps)
messages
used to look up the format style for messages
modifiers
for names of X modifiers
modules
for modules (e.g. zsh modules)
my-accounts
used to look up the users-hosts style
named-directories
for named directories (you wouldn't have guessed that, would
you?)
names for all kinds of names
nicknames
for nicknames of NIS maps
options
for command options
original
used by the _approximate, _correct and _expand completers when
adding the original string
other-accounts
used to look up the users-hosts style
packages
for packages (e.g. rpm or installed Debian packages)
parameters
for names of parameters
path-directories
for names of directories found by searching the cdpath array
when completing for the cd and related builtin commands
paths used to look up the values of the expand, ambiguous and spe‐
cial-dirs styles
pods for perl pods (documentation files)
ports for communication ports
prefixes
for prefixes (like those of a URL)
printers
for printer names
processes
for process identifiers
processes-names
used to look up the command style when generating the names of
processes for killall
sequences
for sequences (e.g. mh sequences)
sessions
for sessions in the zftp function suite
signals
for signal names
strings
for strings (e.g. the replacement strings for the cd builtin
command)
styles for styles used by the zstyle builtin command
tags for tags (e.g. rpm tags)
targets
for makefile targets
types for types of whatever (e.g. address types for the xhost command)
urls used to look up the urls and local styles when completing URLs
users for usernames
values when completing a value out of a set of values (or a list of
such values)
version
used by _call_program to look up the command to run to determine
the installed version of various other commands (such as diff
and make).
warnings
used to look up the format style for warnings
widgets
for zsh widget names
windows
for IDs of X windows
zsh-options
for shell options
Standard Styles
Here are the names of the styles used by the completion system. Note
that the values of several of these styles represent boolean values;
here, any of the strings `true', `on', `yes', and `1' can be used for
the truth value `true' and the strings `false', `off', `no', and `0'
are interpreted as `false'. The behavior for any other value is unde‐
fined unless the description for the particular style mentions other
possible values; in particular, the default value may be either on or
off if the style is not set.
Some of these styles are tested for every tag used to add possible
matches and for the default tag (most notably menu, list-colors and the
styles controlling the completion listing like list-packed and
last-prompt). When tested for the default tag, only the function field
of the context will be set up, so the default value will normally be
set like:
zstyle ':completion:*:default' menu ...
accept-exact
This is tested for the default tag and the tags used when gener‐
ating matches. If it is set to `true' for at least one match
which is the same as the string on the line, this match will
immediately be accepted.
When completing pathnames (where it is looked up for the paths
tag), this style also accepts any number of patterns as the
value. If this is used, pathnames matching one of these patterns
will be accepted immediately even if the command line contains
some more partially typed pathname components and these match no
file under the directory accepted.
Note that this is also used by the _expand completer to decide
if words beginning with a tilde or parameter expansion should be
expanded. This means that if, for example, there are parameters
foo and foobar, the string `$foo' will only be expanded if
accept-exact is set to `true'.
add-space
This style is used by the _expand completer. If it is `true'
(the default), a space will be inserted after all words result‐
ing from the expansion (except for directory names which get a
slash). The value may also be the string `file' to make the
completer add a space only to names of existing files. Finally,
the `true' values and `file' may be combined with `subst' to
keep the completer from adding a space when the resulting words
were generated by expanding a substitution of the form `$(...)'
or `${...}'.
It is also used by the _prefix completer as a simple boolean
value to decide if a space should be inserted before the suffix.
ambiguous
This applies when completing non-final components of filename
paths. If it is set, the cursor is left after the first ambigu‐
ous component, even if menu completion is in use. It is tested
with the paths tag.
assign-list
When completing after an equals sign, the completion system nor‐
mally completes only one filename. In some cases, particularly
for certain parameters such as PATH, a list of filenames sepa‐
rated by colons is required. This style can be set to a list of
patterns matching the names of such parameters.
The default is to complete lists when the word on the line
already contains a colon.
auto-description
If set, this style's value will be used as the description for
options which are not described by the completion functions, but
that have exactly one argument. The sequence `%d' in the value
will be replaced by the description for this argument. Depend‐
ing on personal preferences, it may be useful to set this style
to something like `specify: %d'. Note that this may not work
for some commands.
avoid-completer
This is used by the _all_matches completer to decide if the
string consisting of all matches should be added to the list
currently being generated. Its value is a list of names of com‐
pleters. If any of these is the name of the completer that gen‐
erated the matches in this completion, the string will not be
added.
The default value for this style is `_expand _old_list _correct
_approximate', i.e. it contains the completers for which a
string with all matches will almost never be wanted.
cache-path
This style defines the path where any cache files containing
dumped completion data are stored. Defaults to `$ZDOTDIR/.zcom‐
pcache', or `$HOME/.zcompcache' if $ZDOTDIR is not defined. The
completion layer will not be used unless the use-cache style is
set.
call-command
Currently this is only used by the function completing make tar‐
gets. If it is set to `true' and the installed version of the
make command allows it, make is called in a way to generate all
possible targets. The default value of this style is `false'
because calling make can potentially take a very long time and
in some cases may even cause actions from the makefile be exe‐
cuted despite the options given to make.
command
In many places, completion functions need to call external com‐
mands to generate the list of completions. This style can be
used to override the command which is called in some such cases.
The elements of the value are joined with spaces to form a com‐
mand line to execute. The value can also start with a hyphen,
in which case the usual command will be added to the end; this
is most useful for putting `builtin' or `command' in front to
make sure the appropriate version of a command is called, for
example to avoid calling a shell function with the same name as
an external command.
As an example, the function generating process IDs as matches
uses this style with the processes tag to generate the IDs to
complete and the list of processes to display (if the verbose
style is `true'). The list produced by the command should look
like the output of the ps command. The first line is not dis‐
played, but is searched for the string `PID' (or `pid') to find
the position of the process IDs in the following lines. If the
line does not contain `PID', the first numbers in each of the
other lines are taken as the process IDs to complete.
Note that the completion function generally has to call the com‐
mand every time it is called. Because of that care should be
taken to specify only commands that take a short time to run
(and that will eventually stop at all).
commands
This is used by the function completing sub-commands for the
system initialisation scripts (residing in /etc/init.d or some‐
where not too far away from that). It's values give the default
commands to complete for those commands for which the completion
function isn't able to find them out automatically. The default
for this style are the two strings `start' and `stop'.
complete
This is used by the _expand_alias function when invoked as a
bindable command. If it set to `true' and the word on the com‐
mand line is not the name of an alias, matching alias names will
be completed.
completer
The strings given as the value of this style provide the names
of the completer functions to use. The available completer func‐
tions are described in the section `Control Functions' below.
Each string may be the name of a completer function or a string
of the form `function:name'. In the first case the completer
field of the context will contain the name of the completer
without the leading underscore and with all other underscores
replaced by hyphens. In the second case the function is the
name of the completer to call, but the context will contain the
name in the completer field of the context. If the name starts
with a hyphen, the string for the context will be build from the
name of the completer function as in the first case with the
name appended to it. For example:
zstyle ':completion:*' completer _complete _complete:-foo
Here, completion will call the _complete completer twice, once
using `complete' and once using `complete-foo' in the completer
field of the context. Normally, using the same completer more
than once makes only sense when used with the `functions:name'
form, because otherwise the context name will be the same in all
calls to the completer; possible exceptions to this rule are the
_ignored and _prefix completers.
The default value for this style is _complete _ignored, i.e.
normally only completion will be done, first using the
ignored-patterns style and the $fignore array and then without
ignoring matches.
condition
This style is used by the _list completer function to decide if
insertion of matches should be delayed unconditionally. The
default is `true'.
disabled
If this is set to `true', the _expand_alias completer and bind‐
able command will try to expand disabled aliases, too. The
default is `false'.
disable-stat
This is used with an empty tag by the function completing for
the cvs command to decide if the zsh/stat module should be used
to generate names of modified files in the appropriate places
(this is its only use). If set, completion will use the ls com‐
mand.
domains
If set, gives the names of network domains that should be com‐
pleted. If this is not set by the user domain names will be
taken from the file /etc/resolv.conf.
expand This style is used when completing strings consisting of multi‐
ple parts, such as path names. If one of its values is the
string `prefix', the partially typed word from the line will be
expanded as far as possible even if trailing parts cannot be
completed. If one of its values is the string `suffix', match‐
ing names for components after the first ambiguous one will also
be added. This means that the resulting string is the longest
unambiguous string possible, but if menu completion is started
on the list of matches generated this way, this will also cycle
through the names of the files in pathname components after the
first ambiguous one.
fake-files
This style is used when completing files and looked up without a
tag. Its values are of the form `dir:names...'. This will add
the names (strings separated by spaces) as possible matches when
completing in the directory dir, even if no such files really
exist.
This can be useful on systems that support special filesystems
whose top-level pathnames can not be listed or generated with
glob patterns. It can also be used for directories for which
one does not have read permission.
fake-parameters
This is used by the completion function generating parameter
names as matches. Its values are names of parameters which
might not yet be set, but which should be completed nonetheless.
Each name may also be followed by a colon and a string specify‐
ing the type of the parameter (like `scalar', `array' or `inte‐
ger'). If such a type is given, the name will only be completed
if parameters of that type are requested in the particular con‐
text. Names for which no type is specified will always be com‐
pleted.
file-patterns
In most places where filenames are completed, the function
_files is used which can be configured with this style. If the
style is unset, _files offers, one after another, up to three
tags: `globbed-files', `directories' and `all-files', depending
on the types of files expected by the caller of _files.
If the file-patterns style is set, the default tags are not
used. Instead, the value of the style says which tags and which
patterns are to be offered. The strings in the value contain
specifications of the form `pattern:tag'; each string may con‐
tain any number of such specifications. The pattern gives a
glob pattern that is to be used to generate filenames. If it
contains the sequence `%p', that is replaced by the pattern(s)
given by the calling function. Colons in the pattern must be
preceded by a backslash to make them distinguishable from the
colon before the tag. If more than one pattern is needed, the
patterns can be given inside braces, separated by commas. The
tags of all strings in the value will be offered by _files
(again, one after another) and used when looking up other
styles. For strings containing more than one specification, the
filenames for all specifications will be generated at the same
try. If no `:tag' is given the `files' tag will be used. The
tag may also be followed by an optional second colon and a
description. If that is given, this description will be used
for the `%d' in the value of the format style (if that is set)
instead of the default description supplied by the completion
function. If the description given here contains itself a `%d',
that is replaced with the description supplied by the completion
function.
For example, to make the rm command first complete only names of
object files and the names of all files if no object file
matches the string on the line, one would do:
zstyle ':completion:*:*:rm:*' file-patterns \
'*.o:object-files' '%p:all-files'
Another interesting example is to change the default behaviour
that makes completion first offer files matching the patterns
given by the calling function, then directories and then all
files. Many people prefer to get both the files matching the
given patterns and the directories in the first try and all
files at the second try. To achieve this, one could do:
zstyle ':completion:*' file-patterns \
'%p:globbed-files *(-/):directories' '*:all-files'
This works even for contexts in which all files would be com‐
pleted, because _files will not try a pattern more than once and
it stops when the pattern `*' was tried.
Note also that during the execution of completion functions, the
EXTENDED_GLOB option is in effect, so the characters `#', `~'
and `^' have special meanings in the patterns.
file-sort
The completion function that generates filenames as possible
matches uses this style without a tag to determine in which
order the names should be listed and completed when using menu
completion. The value may be one of `size' to sort them by the
size of the file, `links' to sort them by the number of links to
the file, `modification' (or `time' or `date') to sort them by
the last modification time, `access' to sort them by the last
access time, or `inode' (or `change') to sort them by the last
inode change time. If the style is set to any other value, or
is unset, files will be sorted alphabetically by name. If the
value contains the string `reverse', sorting is done in decreas‐
ing order.
force-list
This forces a list of completions to be shown at any point where
listing is done, even in cases where the list would usually be
suppressed. For example, normally the list is only shown if
there are at least two different matches. By setting this style
to `always', the list will always be shown, even if there is
only a single match which is immediately accepted. The style
may also be set to a number. In this case the list will be
shown if there are at least that many matches, even if they
would all insert the same string.
This style is tested for the default tag and all tags used when
generating matches. This allows one to turn unconditional list‐
ing on for certain types of matches.
format If this is set for the descriptions tag, its value is used as a
string to display above matches in completion lists. The
sequence `%d' in this string will be replaced with a short
description of what these matches are. This string may also
contain the sequences to specify output attributes, such as
`%B', `%S' and `%{...%}'.
For the same purpose, this style is also tested with the tags
used when matches are generated before it is tested for the
descriptions tag. This provides the possibility of defining
different format strings for different types of matches.
Note also that some completer functions define additional
`%'-sequences. These are described for the completer functions
that make use of them.
For the messages tag, this style defines a string used by some
completion functions to display messages. Here, the `%d' is
replaced with a message given by the completion function.
Finally, when set with the warnings tag, the format string is
printed when no matches could be generated at all. In this case
the `%d' is replaced with the descriptions for the matches that
were expected separated by spaces and the sequence `%D' is
replaced with those descriptions separated by newlines.
The `%' for the sequences that are replaced by strings provided
by the completion functions like the `%d' may be followed by
field width specifications as described for the zformat builtin
command from the zsh/zutil module, see zshmodules(1).
glob This is used by the _expand completer. If it is set to `true'
(the default), globbing will be attempted on the words resulting
from substitution (see the substitute style) or the original
string from the line.
global If this is set to `true' (the default), the _expand_alias com‐
pleter and bindable command will try to expand global aliases.
group-name
The completion system can put different types of matches in dif‐
ferent groups which are then displayed separately in the list of
possible completions. This style can be used to give the names
for these groups for particular tags. For example, in command
position the completion system generates names of builtin and
external commands, names of aliases, shell functions and parame‐
ters and reserved words as possible completions. To have the
external commands and shell functions listed separately, one can
set:
zstyle ':completion:*:*:-command-:*:commands' group-name commands
zstyle ':completion:*:*:-command-:*:functions' group-name functions
This also means that if the same name is used for different
types of matches, then those matches will be displayed together
in the same group.
If the name given is the empty string, then the name of the tag
for the matches will be used as the name of the group. So, to
have all different types of matches displayed separately, one
can just set:
zstyle ':completion:*' group-name ''
All matches for which no group name is defined will be put in a
group named -default-.
group-order
This style is to be used together with the group-name style.
Once different types of matches are put into different groups,
this style can be used to define in which order these groups
should appear when listing (compare tag-order, which determines
which completions appear at all). The strings in the value are
taken as group names and the named groups will be shown in the
order in which their names appear in the value. All groups
whose names are not given in the value of this style will appear
in the order defined by the function generating the matches.
For example, to have names of builtin commands, shell functions
and external commands appear in this order when completing in
command position one would set:
zstyle ':completion:*:*:-command-:*' group-order \
builtins functions commands
groups A style holding the names of the groups that should be com‐
pleted. If this is not set by the user, the group names from the
YP database or the file `/etc/group' will be used.
hidden If this is set to one of the `true' values, the matches for the
tags for which this is set will not appear in the list; only the
description for the matches as set with the format style will be
shown. If this is set to `all', not even the description will
be displayed.
Note that the matches will still be completed; they are just not
shown in the list. To avoid having matches considered as possi‐
ble completions at all, the tag-order style can be modified as
described below.
hosts A style holding the names of hosts that should be completed. If
this is not set by the user the hostnames in `/etc/hosts' will
be used.
hosts-ports
This style is used by commands that need or accept hostnames and
ports. The strings in the value should be of the form
`host:port'. These hostnames and ports are completed depending
on the information already on the line, so that if, for example,
the hostname is already typed, only those ports specified for
that host will be completed. Multiple ports for the same host
may appear.
ignore-line
This style is tested for the tags used when generating matches.
If it is set to `true', then none of the words that are already
on the line will be considered possible completions. If it is
set to `current', the word the cursor is on will not be consid‐
ered a possible completion. The same happens if the value is
`current-shown', but only if the list of completions is cur‐
rently shown on the screen. Finally, if it is set to `other'
all words except the current one will not be considered to be a
possible completion.
The values `current' and `current-shown' are a bit like the
opposite of accept-exact. They mean that only strings with miss‐
ing characters will be completed.
Note that you almost certainly don't want to set this to `true'
or `other' for a general context such as `:completion:*'. This
is because it would disallow completion of, for example, options
multiple times even if the command in question accepts the
option more than once.
ignore-parents
The style is tested by the function completing pathnames without
a tag to determine whether to ignore the names of directories
already mentioned in the current word, or the name of the cur‐
rent working directory. The value must include one or both of
the following strings:
parent The name of any directory whose path is already contained
in the word on the line is ignored. For example, when
completing after foo/../, the directory foo will not be
considered a valid completion.
pwd The name of the current working directory will not be
completed, so that, for example, completion after ../
will not use the name of the current directory.
In addition, the value may include one or both of:
.. Ignore the specified directories only when the word on
the line contains the substring `../'.
directory
Ignore only when names of directories are completed, not
when completing names of files.
Note that names of directories ignored because of one of the
tests will be ignored in the same way as the matches ignored
because of the ignored-patterns style. I.e., by using the
_ignored completer it is possible to complete these directories
nonetheless.
ignored-patterns
This style can be used to specify a list of patterns which are
tested against against the trial completions in a given context;
any matching completions will be removed from the list of possi‐
bilities. The _ignored completer can appear in the list of com‐
pleters to produce a list which includes these matches once
more. This is a more configurable version of the shell parame‐
ter $fignore.
Note that during the execution of completion functions, the
EXTENDED_GLOB option is in effect, so the characters `#', `~'
and `^' have special meanings in the patterns.
insert-ids
When completing process IDs, for example as arguments to the
kill and wait builtins, completion allows the user to type the
name of a command, which will be converted to the appropriate
process ID. A problem arises when the process name typed is not
unique. By default (or if this style is set explicitly to
`menu') the name will be converted immediately to a set of pos‐
sible IDs, and menu completion will be started to cycle through
them. If the value of the style is `single', however, the shell
will wait until the user has typed enough to make the command
unique before converting the name to an ID; the user must type
any additional characters required. If the value is any other
string, menu completion will be started when the string typed by
the user is longer than the common prefix of the corresponding
IDs.
insert-tab
If this has one of the `true' values, the completion system will
insert a TAB character (assuming it was used to start comple‐
tion) instead of performing completion when there is no
non-blank character to the left of the cursor. If set to
`false', completion will be done even there.
The value may also contain the substrings `pending' or `pend‐
ing=val' to make the character typed to start completion be
inserted instead of completion being tried when there is input
pending which has not yet been processed by the shell. If a val
is given, completion will not be done if there are at least that
many characters of unprocessed input. This is often useful to
have set when pasting characters into a terminal. Note however,
that it relies on the $PENDING special parameter from the
zsh/zle module being set properly which is not guaranteed on all
platforms.
The default value of this style is `true' unless when completing
inside the vared builtin command, where it defaults to `false'.
insert-unambiguous
This is used by the _match and _approximate completer functions,
where the possible completions may not have a common prefix so
that menu completion is often the most useful may of choosing
completions. If the style is set to `true', the completer will
start menu completion only if no unambiguous string could be
generated that is at least as long as the original string typed
by the user. Note that the _approximate completer uses it after
setting the completer field in the context name to one of cor‐
rect-num or approximate-num, where num is the number of errors
that were accepted.
When used for the _match completer, the style may also be set to
the string `pattern'. This makes the pattern on the line be
left unchanged if it didn't match unambiguously.
keep-prefix
This style is used by the _expand completer. If it is `true',
the completer will try to keep a prefix containing a tilde or
parameter expansion. I.e., the string `~/f*' would be expanded
to `~/foo' instead of `/home/user/foo'. If the style is set to
`changed' (the default), the prefix will only be left unchanged
if there were other changes between the expanded words and the
original word from the command line. Any other value makes the
prefix be expanded unconditionally.
Note that with one of the `true' values, the _expand completer
returns if there is only one expansion and that is, after
restoring the original prefix, the same as the original word.
This means that other completers will be called immediately
after _expand.
last-prompt
This is used to determine if the completion code should try to
put the cursor back onto the previous command line after showing
a completion listing (as for the ALWAYS_LAST_PROMPT option). As
with several other styles, it is tested for the default tag as
well as all the possible tags when generating matches. The cur‐
sor will be moved back to the previous line if this style is
`true' for all types of matches added. Note also that this is
independent of the numeric argument, unlike the
ALWAYS_LAST_PROMPT option.
list This style is used by the _history_complete_word bindable com‐
mand. If it is set to `true' it has no effect, but if it is set
to `false' the matches will not be listed, overriding the set‐
ting of the options that control listing behaviour, especially
AUTO_LIST. Use the context prefix `:completion:history-words'.
list-colors
If the zsh/complist module is used, this style can be used to
set color specifications as with the ZLS_COLORS and ZLS_COLOURS
parameters, which will not be honored under this completion sys‐
tem (see the section `The zsh/complist Module' in zshmod‐
ules(1)).
If this style is set for the default tag, the strings in the
value are taken as specifications that are to be used every‐
where. If it is set for other tags, the specifications are used
only for matches of the type described by the tag. For this to
work best, the group-name style must be set to an empty string.
If the group-name tag specifies other names for the groups the
matches in these groups can be colored by using these names
together with the `(group)...' syntax described for the
ZLS_COLORS and ZLS_COLOURS parameters and adding the specifica‐
tions to the value for this style with the default tag (although
in most cases it should work by setting this style for the
appropriate tags).
It is possible to use the same specifications set up for the GNU
version of the ls command:
zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
The default colors are the same as for the GNU ls command and
can be obtained by setting the style to an empty string (i.e.
'').
list-packed
Like the list-colors style, this is tested with the default tag
and all tags used when generating matches. If it is set to
`true' for a tag, the matches added for it will be listed as if
the LIST_PACKED option were set. If it is set to `false', they
are listed normally.
list-prompt
If this style is set for the default tag, completion lists that
don't fit on the screen can be scrolled (see the description of
the zsh/complist module in zshmodules(1)). The value, if not
the empty string, will be displayed after every screenful and
the shell will prompt for a key press; if the style is set to
the empty string, a default prompt will be used. The value may
contain the escape sequences `%l' or `%L', which will be
replaced by the number of the last line displayed and the total
number of lines; `%m' or `%M', which will be replaced by the
number of the last match shown and the total number of matches;
and `%p' and `%P', which will be replaced by `Top' when at the
beginning of the list, `Bottom' when at the end and the position
shown in percent of the total length otherwise. In each of
these cases the form with the uppercase letter is replaced by a
string of fixed width, padded to the right with spaces. As in
other prompt strings, the escape sequences `%S', `%s', `%B',
`%b', `%U', `%u', and `%{...%}' for entering and leaving the
display modes standout, bold and underline are also available.
list-rows-first
This style is tested in the same way as the list-packed style
and determines if matches are to be listed in a rows-first fash‐
ion, as for the LIST_ROWS_FIRST option.
list-suffixes
This style is used by the function used to complete filenames.
If completion is attempted on a string containing multiple par‐
tially typed pathname components and this style is set to
`true', all components starting with the first one for which
more than one match could be generated will be shown.
local This style is used by completion functions which generate URLs
as possible matches to add suitable matches when a URL points to
a local web server, that is, one whose files are available
directly on the local file system. Its value should consist of
three strings: a hostname, the path to the default web pages for
the server and the directory name used by a user placing web
pages within their home area. For example, completion after
`http://toast/~yousir/' will attempt to match the name `toast'
against the first argument to the style, and if successful will
look in the directory under ~yousir given by the third argument
to the style for possible completions.
match-original
This is used by the _match completer. If it is set to only,
_match will try to generate matches without inserting a `*' at
the cursor position. If set to any other non-empty value, it
will first try to generate matches without inserting the `*' and
if that yields no matches, it will try again with the `*'
inserted. If it is unset or set to the empty string, matching
will only be done with the `*' inserted.
matcher
This style is tested for tags used when generating matches. Its
value is used as an match specification additional to any given
by the matcher-list style which should be in the form described
in the section `Matching Control' in zshcompwid(1).
matcher-list
This style is used by the main completion function to retrieve
match specifications that are to be used everywhere. Its value
should be a list of such specifications. The completion system
will try them one after another for each completer selected. For
example, to first try simple completion and, if that generates
no matches, case-insensitive completion one would do:
zstyle ':completion:*' matcher-list '' 'm:{a-zA-Z}={A-Za-z}'
By default every specification replaces previous ones. If speci‐
fication is prefixed with +, it is added to the existing list.
This allows testing more general patterns without repeating the
whole list every time, as in:
zstyle ':completion:*' matcher-list '' '+m{a-Z}={A-Z}' '+m{A-Z}={a-z}'
The style allows even finer control by specifying a particular
completer, without the leading underscore, in the third field of
the completion context. For example, if one uses the completers
_complete and _prefix but wants to try case-insensitive comple‐
tion only when using the _complete completer, one would do:
zstyle ':completion:*' completer _complete _prefix
zstyle ':completion:*:complete:*' matcher-list \
'' 'm:{a-zA-Z}={A-Za-z}'
Note that the completer style allows user-defined names to be
used in the context instead of the name of the completer. This
is useful if, for example, one wants to try normal completion
without a match specification and with case-insensitive matching
first, correction if that doesn't generate any matches and par‐
tial-word completion if that doesn't yield any matches either.
In this case one can give the _complete completer more than once
in the completer style and define different match specifications
for each occurrence, as in:
zstyle ':completion:*' completer _complete _correct _complete:foo
zstyle ':completion:*:complete:*' matcher-list \
'' 'm:{a-zA-Z}={A-Za-z}'
zstyle ':completion:*:foo:*' matcher-list \
'm:{a-zA-Z}={A-Za-z} r:|[-_./]=* r:|=*'
If the style is unset in any context no match specification is
applied; further, some completers such as _correct and _approxi‐
mate do not use the match specifications at all. However, it is
always safe to use the simple form for this style (as in the
first example above), since any completers which do not use
match specifications will only ever be called once, rather than
once per specification.
Since the specification-strings in this style have to be tried
one after another, it is a good idea to keep their number low.
In most cases one to three strings (each of which may, without
to large a performance hit, consist of more than one single
match specification) will give acceptable performance.
max-errors
This is used by the _approximate and _correct completer func‐
tions to determine the maximum number of errors to allow. The
completer will try to generate completions by first allowing one
error, then two errors, and so on, until either a match or
matches were found or the maximum number of errors given by this
style has been reached.
If the value for this style contains the string `numeric', the
completer function will take any numeric argument as the maximum
number of errors allowed. For example, with
zstyle ':completion:*:approximate:::' max-errors 2 numeric
two errors are allowed if no numeric argument is given, but with
a numeric argument of six (as in `ESC-6 TAB'), up to six errors
are accepted. Hence with a value of `0 numeric', no correcting
completion will be attempted unless a numeric argument is given.
If the value contains the string `not-numeric', the completer
will not try to generate corrected completions when given a
numeric argument, so in this case the number given should be
greater than zero. For example, `2 not-numeric' specifies that
correcting completion with two errors will usually be performed,
but if a numeric argument is given, correcting completion will
not be performed.
The default value for this style is `2 numeric'.
menu If this is set to true in a given context, using any of the tags
defined for a given completion, menu completion will be used.
The tag `default' can be used to set the default value, but a
specific tag will take precedence. If none of the values found
in this way is true but at least one is set to `auto' the behav‐
iour will be as for the AUTO_MENU option. Finally, if one of
the values is explicitly set to false, menu completion will be
turned off even if it would otherwise be active (for example,
with the MENU_COMPLETE option).
Using the form `yes=num', where `yes' may be any of the true
values (`yes', `true', `on' and `1') turns on menu completion if
there at least num matches. Using this for one of the `false'
values (as in `no=10') makes menu completion not be used if
there are num or more matches. Of course, this is only useful
when menu completion is normally used, e.g. by setting the
MENU_COMPLETE option. The `true' values may also be used in the
form `yes=long' to turn on menu completion if the list does not
fit onto the screen. This will start menu completion only if
normal completion was attempted, not when only the list of pos‐
sible completions was requested. To start menu completion even
then, the value `yes=long-list' can be used.
In addition to (or instead of) the above possibilities, the
value may contain the string `select', optionally followed by an
equals sign and a number. In this case menu selection (as
defined by the zsh/complist module) will be started. Without
the optional number, it will be started unconditionally and with
a number it will be started only if at least that many matches
are generated; if the values for more than one tag provide a
number, the smallest number is taken. Menu selection can be
turned off explicitly by defining a value containing the string
`no-select'.
It is also possible to start menu selection only if the list of
matches does not fit on the screen by using the value
`select=long'. This will only start menu selection if the wid‐
get invoked does completion, not simply listing as done by
delete-char-or-list; to start menu selection even here, use the
value `select=long-list'.
To turn on menu completion or menu selection when a certain num‐
ber of matches is generated or the list of matches does not fit
onto the screen, both of `yes=' and `select=' can be given
twice, once with a number and once with `long' or `long-list'.
numbers
This is used with the jobs tag. If it is `true', the shell will
complete the job numbers instead of the shortest unambiguous
strings of the jobs' command lines. If the value is a number,
job numbers will only be used if that many words from the job
descriptions are required to resolve ambiguities. For example,
if the value is `1', strings will only be used if all jobs dif‐
fer in the first word on their command lines.
old-list
This is used by the _oldlist completer. If it is set to
`always', then standard widgets which perform listing will
retain the current list of matches, however they were generated;
this can be turned off explicitly with the value `never', giving
the behaviour without the _oldlist completer. If the style is
unset, or any other value, then the existing list of completions
is displayed if it is not already; otherwise, the standard com‐
pletion list is generated; this is the default behaviour of
_oldlist. However, if there is an old list and this style con‐
tains the name of the completer function that generated the
list, then the old list will be used even if it was generated by
a widget which does not do listing.
For example, suppose you type ^Xc to use the _correct_word wid‐
get, which generates a list of corrections for the word under
the cursor. Usually, typing ^D would generate a standard list
of completions for the word on the command line, and show that.
With _oldlist, it will instead show the list of corrections
already generated.
As another example consider the _match completer: with the
insert-unambiguous style set to `true' it inserts only a common
prefix string, if there is any. However, this may remove parts
of the original pattern, so that further completion could pro‐
duce more matches than on the first attempt. By using the
_oldlist completer and setting this style to _match, the list of
matches generated on the first attempt will be used again.
old-matches
This is used by the _all_matches completer to decide if an old
list of matches should be used if one exists. It may be set to
one of the `true' values or to the string `only' to use such a
list. If it is set to `only', _all_matches will only use an old
list and won't have any effect on the list of matches currently
being generated.
old-menu
This is used by the _oldlist completer. It controls how menu
completion behaves when a completion has already been inserted
and the user types a standard completion key type such as TAB.
The default behaviour of _oldlist is that menu completion always
continues with the existing list of completions. If this style
is set to `false', however, a new completion is started if the
old list was generated by a different completion command; this
is the behaviour without the _oldlist completer.
For example, suppose you type ^Xc to generate a list of correc‐
tions, and menu completion is started in one of the usual ways.
Usually, or with this style set to false, typing TAB at this
point would start trying to complete the line as it now appears.
With _oldlist, it instead continues to cycle through the list of
corrections.
original
This is used by the _approximate and _correct completers to
decide if the original string should be added as one possible
completion. Normally, this is done only if there are at least
two possible corrections, but if this style is set to `true', it
is always added. Note that these completers use this style
after setting the completer field in the context name to cor‐
rect-num or approximate-num, where num is the number of errors
that were accepted.
packageset
This style is used when completing arguments of the Debian
`dpkg' program. It contains an override for the default package
set for a given context. For example,
zstyle ':completion:*:complete:dpkg:option--status-1:*' \
packageset avail
causes available packages, rather than only installed packages,
to be completed for `dpkg --status'.
path The function that completes color names uses this style with the
colors tag. The value should be the pathname of a file contain‐
ing color names in the format of an X11 rgb.txt file. If the
style is not set but this file is found in one of various stan‐
dard locations it will be used as the default.
ports A style holding the service names of ports to complete. If this
is not set by the user, the service names from `/etc/services'
will be used.
prefix-hidden
This is used when matches with a common prefix are added (e.g.
option names). If it is `true', this prefix will not be shown
in the list of matches.
The default value for this style is `false'.
prefix-needed
This, too, is used for matches with a common prefix. If it is
set to `true' this common prefix has to be typed by the user to
generate the matches. E.g. for options this means that the `-',
`+', or `--' has to be on the line to make option names be com‐
pleted at all.
The default style for this style is `true'.
preserve-prefix
This style is used when completing path names. Its value should
be a pattern matching an initial prefix of the word to complete
that should be left unchanged under all circumstances. For
example, on some Unices an initial `//' (double slash) has a
special meaning and hence should be kept. For that one could
set this style to the string `//'. As another example, setting
this style to `?:/' under Cygwin would allow completion after
`a:/...' and the like.
range This is used by the _history completer and the _history_com‐
plete_word bindable command to decide which words should be com‐
pleted. It may be set to a number, N, to say that only the last
N words from the history should be completed. The value may
also be of the form `max:slice'. This means that first the last
slice words will be completed. If that yields no matches, the
slice words before those will be tried and so on, until either
at least one match is generated or max words have been tried.
The default is to complete all words from the history at once.
regular
This style is used by the _expand_alias completer and bindable
command. If set to `true' (the default), regular aliases will
be expanded but only in command position. If it is set to
`false', regular aliases will never be expanded and if it is set
to the string `always', regular aliases will be expanded even if
not in command position.
remove-all-dups
The _history_complete_word bindable command and the _history
completer use this to decide if all duplicate matches should be
removed, rather than just consecutive duplicates.
select-prompt
If this is set for the default tag, its value will be displayed
during menu selection (see the menu style above) when the com‐
pletion list does not fit on the screen as a whole. The same
escapes as for the list-prompt style are understood, but give
the number of the match or line the mark is on. A default
prompt is used when the value is the empty string.
select-scroll
This style is tested for the default tag and determines how a
completion list is scrolled during a menu selection (see the
menu style above) when the completion list does not fit on the
screen as a whole. Its value should be `0' (zero) to scroll by
half-screenfuls, a positive integer to scroll by that many lines
and a negative number to scroll by the number of lines of the
screen minus that number (or plus the number, since it is nega‐
tive). The default is to scroll by single lines.
single-ignored
This is used by the _ignored completer. It specifies what
should be done if it can generate only one match, which is often
a special case. If its value is `show', the single match will
be displayed but not inserted. If the value is `menu', then the
single match and the original string are both added as matches
and menu completion is started so that one can easily select
either of them.
sort If set to `true', completion functions that generate words from
the history as possible matches sort these words alphabetically
instead of keeping them in the order in which they appear in the
history (from youngest to oldest).
This is also used by the _expand completer. Here, if it is set
to `true', the expansions generated will always be sorted. If
it is set to `menu', then the expansions are only sorted when
they are offered as single strings (not in the string containing
all possible expansions).
special-dirs
Normally, the completion code will not produce the directory
names `.' and `..' as possible completions. If this style is
set to `true', it will add both `.' and `..' as possible comple‐
tions; if it is set to `..', only `..' will be added.
squeeze-slashes
If set to `true', sequences of slashes (as in `foo//bar') will
be treated as if they were only one slash when completing path‐
names. This is the usual behaviour of UNIX paths. However, by
default the file completion function behaves as if there were a
`*' between the slashes.
stop If set to `true', the _history_complete_word bindable command
will stop once when reaching the beginning or end of the his‐
tory. Invoking _history_complete_word will then wrap around to
the opposite end of the history. If this style is set to
`false' (the default), _history_complete_word will loop immedi‐
ately as in a menu completion.
subst-globs-only
This is used by the _expand completer. If it is set to `true',
the expansion will only be used if it resulted from globbing;
hence, if expansions resulted from the use of the substitute
style described below, but these were not further changed by
globbing, the expansions will be rejected.
The default for this style is `false'.
substitute
This boolean style controls whether the _expand completer will
first try to expand all substitutions in the string (such as
`$(...)' and `${...}').
The default is `true'.
suffix This is used by the _expand completer if the word starts with a
tilde or contains a parameter expansion. If it is set to `true',
the word will only be expanded if it doesn't have a suffix, i.e.
if it is something like `~foo' or `$foo', but not if it is
`~foo/' or `$foo/bar', unless that suffix itself contains char‐
acters eligible for expansion. The default for this style is
`true'.
tag-order
This provides a mechanism for sorting how the tags available in
a particular context will be used.
The values for the style are sets of space-separated lists of
tags. The tags in each value will be tried at the same time; if
no match is found, the next value is used. (See the file-pat‐
terns style for an exception to this behavior.)
For example:
zstyle ':completion:*:complete:-command-:*' tag-order \
'commands functions'
specifies that completion in command position should offer only
completions for external commands and shell functions immedi‐
ately.
In addition to tag names, each string in the value may take one
of the following forms:
- If any string in the value consists of only a hyphen,
then only the tags specified by the other strings in the
value are generated. Normally all tags not explicitly
selected are tried last if the specified tags fail to
generate any matches. This means that a value consisting
only of a single hyphen turns off completion.
! tags...
A string starting with an exclamation mark specifies
names of tags that are not to be used. The effect is the
same as if all other possible tags for the context had
been listed.
tag:label ...
In strings not starting with an exclamation mark, it is
also possible to specify tag labels instead of only tags,
where tag is one of the tags offered by the completion
function for the current context and label is a name.
For this, the completion function will generate matches
in the same way as for the tag but it will use the label
in place of the tag in the context names used to look up
styles. If the label starts with a hyphen, the tag is
prepended to the label to form the name used for lookup.
This can be used to make the completion system try a cer‐
tain tag more than once, supplying different style set‐
tings for each attempt, see below for an example.
The label may optionally be followed by a second colon
and a description. This description will then be used
for the `%d' in the value of the format style instead of
the default description supplied by the completion func‐
tion. Spaces in the description have to be quoted by
preceding them with a backslash and a `%d' appearing in
the description is replaced with the description given by
the completion function.
In each of the cases above, the tag may also be a pattern or more than
one pattern inside braces and separated by commas. In this case all of
the offered tags matching the pattern(s) will be used except for those
that are given explicitly in the same string. There are probably two
main uses of this. One is the case where one wants to try one of the
tags more than once, setting other styles differently for each try, but
still wants to use all the other tags without having to repeat them
all. For example, to make completion of function names in command
position ignore all the completion functions starting with an under‐
score the first time completion is tried, one could do:
zstyle ':completion:*:*:-command-:*' tag-order \
'functions:-non-comp *' functions
zstyle ':completion:*:functions-non-comp' ignored-patterns '_*'
Here, the completion system will first try all tags offered, but will
use the tag label functions-non-comp when looking up styles for the
function names completed. For this, the ignored-patterns style is set
to exclude functions starting with an underscore from the set of possi‐
ble matches. If none of the generated matches match the string on the
line, the completion system will use the second value of the tag-order
style and complete functions names again, but this time using the name
functions to look up styles, so that the ignored-patterns style is not
used and all function names are considered.
Of course, this can also be used to split the matches for one tag into
different groups. For example:
zstyle ':completion:*' tag-order \
'options:-long:long\ options
options:-short:short\ options
options:-single-letter:single\ letter\ options'
zstyle ':completion:*:options-long' ignored-patterns '[-+](|-|[^-]*)'
zstyle ':completion:*:options-short' ignored-patterns '--*' '[-+]?'
zstyle ':completion:*:options-single-letter' ignored-patterns '???*'
With the group-names style set, this makes options beginning with `--',
options beginning with a single `-' or `+' but containing multiple
characters, and single-letter options be displayed in separate groups
with different descriptions.
The second interesting use of patterns is the case where one wants to
try multiple match specifications one after another. The matcher-list
style offers something similar, but it is tested very early in the com‐
pletion system and hence can't be set for single commands nor for more
specific contexts. Here is how to try normal completion without any
match specification and, if that generates no matches, try again with
case-insensitive matching, restricting the effect to arguments of the
command foo:
zstyle ':completion:*:*:foo:*' tag-order '*' '*:-case'
zstyle ':completion:*-case' matcher 'm:{a-z}={A-Z}'
First, all the tags offered when completing after foo are tried using
the normal tag name. If that generates no matches, the second value of
tag-order is used, which tries all tags again except that this time
each has -case appended to its name for lookup of styles. Hence this
time the value for the matcher style from the second call to zstyle in
the example is used to make completion case-insensitive.
Using the -e option of the zstyle builtin command, it is possible to
specify conditions saying when certain tags are to be used. For exam‐
ple:
zstyle -e '*:-command-:*' tag-order '
if [[ -n $PREFIX ]]; then
reply=( )
else
reply=( - )
fi'
Makes completion in command position happen only if the string on the
line is not empty. This is tested using the PREFIX parameter which is
special in completion widgets; see zshcompwid for a description of
these special parameters. Setting reply to an empty array ensures that
only the default behaviour of trying all tags at once is used and set‐
ting it to an array containing only a hyphen disables that default be‐
haviour -- thus keeping all tags from being tried.
If no style has been defined for a context, the strings `(|*-)argu‐
ment-* (|*-)option-* values' and `options' plus all tags offered by the
completion function will be used to provide a sensible default behavior
that causes arguments (whether normal command arguments or arguments of
options) to be completed before option names for most commands.
urls This is used together with the the urls tag by completion func‐
tions that generate URLs as possible matches. If the value con‐
sists of more than one string or if the only string does not
name a file or directory, the strings are used as the URLs to
complete.
If the value contains only one string and that is the name of a
normal file, the URLs are taken from that file (where the URLs
may be separated by white space or newlines).
Finally, if the only string in the value names a directory, that
should contain sub-directories named after the retrieval methods
which occur as the first part of a URL, i.e. `http', `ftp',
`bookmark', and so on. These sub-directories should contain
files and other sub-directories whose pathnames are possible
completions after the initial `http://', `ftp://', etc. See the
description in the file _urls in the User sub-directory of the
completion system for more information.
use-cache
If this is set, the completion caching layer is activated for
any completions which use it (via the _store_cache,
_retrieve_cache, and _cache_invalid functions). The directory
containing the cache files can be changed with the cache-path
style.
use-compctl
If this style is set to a string not equal to false, 0, no, and
off, the completion system may use any completion specifications
defined with the compctl builtin command. If the style is
unset, this is done only if the zsh/compctl module is loaded.
The string may also contain the substring `first' to make the
definition for `compctl -T' be used, and the substring `default'
to make the one for `compctl -D' be used.
Note that this is only intended to smooth the transition from
compctl to the new completion system and may disappear in the
future.
Note also that the definitions from compctl will only be used if
there is no specific completion function for the command in
question. For example, while completing arguments to the com‐
mand foo, if this was handled by a command function _foo, com‐
pctl would never be tried, while if it was handled by _default,
compctl would be tried.
users This may be set to a list of names that should be completed
whenever a username is needed. If it is not set or the string on
the line doesn't match any of the strings in this list, all
usernames will be completed.
users-hosts
The values of this style should be of the form `user@host' or
`user:host'. It is used for commands that need pairs of user-
and hostnames. For such commands, only the pairs from this
style are used and if, for example, the username is already
typed, then only the hostnames for which there is a pair with
that username is defined.
If set for the my-accounts tag, this is used for commands such
as rlogin and ssh; in this case the style should contain the
names of the user's own accounts on remote hosts. If set for
the other-accounts tag, it is used for commands such as talk and
finger and should contain other people's accounts. Finally, it
may also be used by some commands with the accounts tag.
users-hosts-ports
Like users-hosts but used for commands like telnet and contain‐
ing strings of the form `user@host:port'.
verbose
This is used in several contexts to decide if only a simple or a
verbose list of matches should be generated. For example some
commands show descriptions for option names if this style is
`true'.
The default value for this style is `true'.
word This is used by the _list completer, which prevents the inser‐
tion of completions until a second completion attempt when the
line has not changed. The normal way of finding out if the line
has changed is to compare its entire contents between the two
occasions. If this style is true, the comparison is instead
performed only on the current word. Hence if completion is per‐
formed on another word with the same contents, completion will
not be delayed.
CONTROL FUNCTIONS
The initialization script compinit redefines all the widgets which per‐
form completion to call the supplied widget function _main_complete.
This function acts as a wrapper calling the so-called `completer' func‐
tions that generate matches. If _main_complete is called with argu‐
ments, these are taken as the names of completer functions to be called
in the order given. If no arguments are given, the set of functions to
try is taken from the completer style. For example, to use normal com‐
pletion and correction if that doesn't generate any matches:
zstyle ':completion:*' completer _complete _correct
after calling compinit. The default value for this style is `_complete
_ignored', i.e. normally only ordinary completion is tried, first with
the effect of the ignored-patterns style and then without it. The
_main_complete function uses the return value of the completer func‐
tions to decide if other completers should be called. If the return
value is zero, no other completers are tried and the _main_complete
function returns.
If the first argument to _main_complete is a single hyphen, the argu‐
ments will not be taken as names of completers. Instead, the second
argument gives a name to use in the completer field of the context and
the other arguments give a command name and arguments to call to gener‐
ate the matches.
The following completer functions are contained in the distribution
(users may write their own):
_all_matches
This completer can be used to add a string consisting of all
other matches. To ensure, that this string is always added,
this completer has to be used as the first completer in the
list. The avoid-completer style is used to decide if the string
should be added. This will only be done if the matches were
generated by a completer not named by one of the values of the
style.
This function also uses the style old-matches. If it is set to
`true' or to the string `only' and there is a list of matches
from a previous completion, those matches will be inserted in
the command line. If it is set to the the string `only', it
will only insert an old list and won't add the string for all
matches of the list currently being generated.
With the old-matches style set, this completer should probably
not be called unconditionally. Instead one could use the -e
option of the zstyle builtin command to add a condition to the
completer or to the old-matches style. Alternatively, one could
use the _generic function to bind _all_matches to a separate key
binding, for example:
zle -C all-matches complete-word _generic
bindkey '^Xa' all-matches
zstyle ':completion:all-matches:*' old-matches only
zstyle ':completion:all-matches:*' completer _all_matches
_approximate
This completer function uses the _complete completer to generate
a list of strings for the context the cursor is currently in,
allowing you to specify a maximum number of errors: see the
description of approximate matching in zshexpn(1) for how errors
are counted. The resulting list of corrected and completed
strings is then presented to the user. The intended use of this
completer function is to try after the normal _complete com‐
pleter by setting:
zstyle ':completion:*' completer _complete _approximate
This will give correcting completion if and only if normal com‐
pletion yields no possible completions. When corrected comple‐
tions are found, the completer will normally start menu comple‐
tion allowing you to cycle through these strings.
This completer uses the tags corrections and original when gen‐
erating the possible corrections and the original string. The
format style for the former may contain the additional sequences
`%e' and `%o' which will be replaced by the number of errors
accepted to generate the corrections and the original string,
respectively.
As with all completers, _approximate uses its name without the
underscore in the completer field of the context name. Once it
has started trying to generate matches, it will append a minus
sign and the number of errors accepted to its name. _approxi‐
mate will first look for completions with one error, then two,
and on so up to the limit on the number of errors set by the
max-errors style. Hence on the first try the completer field of
the context contains `approximate-1', on the second try `approx‐
imate-2', and so on.
When _approximate is called from another function, the number of
errors to accept may be given with the -a option. Its argument
should be the same as the value of the max-errors style, all in
one string.
Note that this completer (and the _correct completer mentioned
below) can be quite expensive to call, especially when a large
number of errors are allowed. One way to avoid this is to set
up the completer style using the -e option to zstyle so that
some completers are only used when completion is attempted a
second time on the same string, e.g.:
zstyle ':completion:*' completer '
if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]]; then
_last_try="$HISTNO$BUFFER$CURSOR"
reply=(_complete _match _prefix)
else
reply=(_ignored _correct _approximate)
fi'
This uses the HISTNO parameter and the BUFFER and CURSOR special
parameters that are available inside zle and completion widgets
to find out if the command line hasn't changed since the last
time completion was tried. Only then are the _ignored, _correct
and _approximate completers called.
_complete
This completer generates all possible completions in a con‐
text-sensitive manner, i.e. using the settings defined with the
compdef function explained above and the current settings of all
special parameters. This gives the normal completion behaviour.
To complete arguments of commands, _complete uses the utility
function _normal, which is in turn responsible for finding the
particular function; it is described below. Various contexts of
the form -context-, as mentioned above for the #compdef tag, are
handled specially. These are:
-array-value-
for completion on the right hand side of an array-assign‐
ment (`foo=(...)').
-brace-parameter-
for completing the name of a parameter expansion within
braces (`${...}').
-command-
for completing in a command position.
-condition-
for completion inside conditions (`[[...]]').
-default-
for generating completions when no special completion
function is used.
-equal-
for completion of words beginning with an equals sign
-first-
for adding completions before any other completion func‐
tions are tried; if this function sets the _compskip
parameter to all, no other completion functions will be
called, if it is set to a string containing the substring
patterns, no pattern completion functions will be called,
and if it is set to a string containing default the func‐
tion for the `-default-' context will not be called, but
functions defined for commands will.
-math- for completion inside mathematical contexts, such as
`((...))'.
-parameter-
for completing the name of a parameter expansion
(`$...').
-redirect-
for completion after a redirection operator.
-subscript-
for completion inside subscripts.
-tilde-
for completion after a tilde (`~') character, but before
a slash.
-value-
for completion on the right hand side of an assignment.
Default implementations are supplied for each of these contexts,
in most cases named after the context itself (e.g. completion
for the `-tilde-' context is done by the function named
`_tilde').
Before trying to find a function for a specific context, _com‐
plete checks if the parameter `compcontext' is set. If it is
set to an array, the elements are taken to be the possible
matches which will be completed using the tag `values' and the
description `value'. If it is set to an associative array, the
keys are used as the possible completions and the values (if
non-empty) are used as descriptions for the matches. If `comp‐
context' is set to a string containing colons, it should be of
the form `tag:descr:action'. In this case the tag and descr
give the tag and description to use and the action says what
should be completed in one of the forms described for the _argu‐
ments utility function below.
Finally, if `compcontext' is set to a string without colons, the
value is taken as the name of the context to use and the func‐
tion defined for that context will be called. For this purpose,
there is a special context named -command-line- that completes
whole command lines (commands and their arguments) and is not
used by the completion system itself, but has a function han‐
dling completion for it.
_correct
Generate corrections, but not completions, for the current word;
this is similar to _approximate but will not allow any number of
extra characters at the cursor as that completer does, hence
this is similar to spell-checking. It calls _approximate but
uses a different completer field in the context name.
For example, with:
zstyle ':completion:::::' completer _complete _correct _approximate
zstyle ':completion:*:correct:::' max-errors 2 not-numeric
zstyle ':completion:*:approximate:::' max-errors 3 numeric
correction will accept up to two errors. If a numeric argument
is given, correction will not be performed, but correcting com‐
pletion will be, and will accept as many errors as given by the
numeric argument. Without a numeric argument, first correction
and then correcting completion will be tried, with the first one
accepting two errors and the second one accepting three errors.
When _correct is called as a function, the number of errors to
accept may be given following the -a option. The argument
should be the same as the value of the accept style, all in one
string.
This completer function is intended to be used without the
_approximate completer or, as in the example, just before it.
Using it after the _approximate completer is useless since
_approximate will at least generate the corrected strings gener‐
ated by the _correct completer -- and probably more.
_expand
This completer function does not really do completion, but
instead checks if the word on the command line is eligible for
expansion and, if it is, gives detailed control over how this
expansion is done. When using this, one should not use the
expand-or-complete widget, but instead use complete-word, as
expand-or-complete will expand the string on the line before the
completion widget is called. Also, this completer should be
called before the _complete completer function.
The tags used when generating expansions are all-expansions for
the string containing all possible expansions, expansions when
adding the possible expansions as single matches and original
when adding the original string from the line. In which order
these strings are generated and which of these strings are gen‐
erated at all can be controlled by using the group-order style
and by modifying the tag-order style, as usual.
The format string for all-expansions and for expansions may con‐
tain the sequence `%o' which will be replaced by the original
string from the line.
Which kind of expansion is tried is controlled by the substi‐
tute, glob and subst-globs-only styles.
When _expand is called as a function, the different modes may be
selected with options. The -s to substitute, -g to glob and -o
to subst-globs-only.
_expand_alias
If the word the cursor is on is an alias, it is expanded and no
other completers are called. The types of aliases which are to
be expanded can be controlled with the regular, global and dis‐
abled styles.
This function is also a bindable command, see the section `Bind‐
able Commands' below.
_history
Complete words from the shell's command history. This com‐
pleter uses the remove-all-dups, and sort styles also used by
the _history_complete_word bindable command, see the section
`Bindable Commands' below and the section `Completion System
Configuration' above.
_ignored
The ignored-patterns style can be set to a list of patterns
which are compared against possible completions; matching ones
are removed. With this completer those matches can be rein‐
stated, as if no ignored-patterns style were set. The completer
actually generates its own list of matches; which completers are
used for this is determined in the same way as for the _prefix
completer.
The single-ignored style is used if only one match could be gen‐
erated. It can be set to show to prevent that match from being
displayed or inserted into the line, or it can be set to menu,
in which case the single match and the original string from the
line will be offered in a menu completion.
_list This completer allows one to delay the insertion of matches
until completion is attempted a second time without the word on
the line being changed. On the first attempt, only the list of
matches will be shown. It is affected by the styles condition
and word, see the section `Completion System Configuration'
above.
_match This completer is intended to be used after the _complete com‐
pleter. It allows one to give patterns on the command line and
to complete all strings matching these patterns from the set of
possible completions for the context the cursor is in, without
having to set the GLOB_COMPLETE option.
Normally this will be done by taking the pattern from the line,
inserting a `*' at the cursor position and comparing the result‐
ing pattern with the possible completions generated. However,
if the match-original style has a value of only, no `*' will be
inserted. If match-original has any other non-empty string as
its value, this completer will first try to generate matches
without, then with a `*' inserted at the cursor position.
The generated matches will be offered in a menu completion
unless the insert-unambiguous style is set to `true'. In this
case menu completion will only be started if no unambiguous
string could be generated that is at least as long as the origi‐
nal string. The style may also be set to the string `pattern'.
This will keep the pattern on the line intact as long as there
isn't an unambiguous completion with which it could be replaced.
Note that the matcher specifications defined globally or used by
the completion functions will not be used.
_menu This completer is a simple example function implemented to show
how menu completion can be done in shell code. It should be
used as the first completer and has the effect of making the
code perform menu completion. Note that this is independent of
the setting of the MENU_COMPLETE option and does not work with
the other menu completion widgets such as reverse-menu-complete,
or accept-and-menu-complete.
_oldlist
This completer controls how the standard completion widgets
behave when there is an existing list of completions which may
have been generated by a special completion (i.e. a sepa‐
rately-bound completion command). It allows the ordinary com‐
pletion keys to continue to use the list of completions thus
generated, instead of producing a new list of ordinary contex‐
tual completions. It should appear in the list of completers
before any of the widgets which generate matches. It uses two
styles: old-list and old-menu, see the section `Completion Sys‐
tem Configuration' above.
_prefix
This completer can be used to try completion with the suffix
(everything after the cursor) ignored. In other words, the suf‐
fix will not be considered to be part of the word to complete
and hence does not need to be matched. It uses the completer
style to decide which other completers to call to try to gener‐
ate matches. If this style is unset, the list of completers set
for the current context is used -- except, of course, the _pre‐
fix completer itself. Furthermore, if this completer appears
more than once in the list of completers only those completers
not already tried by the last invocation of _prefix will be
called.
For example, consider this global completer style:
zstyle ':completion:*' completer \
_complete _prefix _correct _prefix:foo
Here, the _prefix completer tries normal completion but ignoring
the suffix. If that doesn't generate any matches, and neither
does the call to the _correct completer after it, _prefix will
be called a second time and, now only trying correction with the
suffix ignored. If you want to use _prefix as the last resort
and try only normal completion, you can use:
zstyle ':completion:*' completer _complete ... _prefix
zstyle ':completion::prefix:*' completer _complete
The add-space style is also used. If it is set to `true' then
_prefix will insert a space between the matches generated (if
any) and the suffix.
Note that this completer is only useful if the COMPLETE_IN_WORD
option is set; otherwise, the cursor will be moved to the end of
the current word before the completion code is called and hence
there will be no suffix.
BINDABLE COMMANDS
In addition to the context-dependent completions provided, which are
expected to work in an intuitively obvious way, there are a few widgets
implementing special behaviour which can be bound separately to keys.
The following is a list of these and their default bindings.
_bash_completions
This function is used by two widgets, _bash_complete-word and
_bash_list-choices. It exists to provide compatibility with
completion bindings in bash. The last character of the binding
determines what is completed: `!', command names; `$', environ‐
ment variables; `@', host names; `/', file names; `~' user
names. In bash, the binding preceded by `\e' gives completion,
and preceded by `^X' lists options. As some of these bindings
clash with standard zsh bindings, only `\e~' and `^X~' are bound
by default. To add the rest, the following should be added to
.zshrc after compinit has been run:
for key in '!' '$' '@' '/' '~'; do
bindkey "\e$key" _bash_complete-word
bindkey "^X$key" _bash_list-choices
done
This includes the bindings for `~' in case they were already
bound to something else; the completion code does not override
user bindings.
_correct_filename (^XC)
Correct the filename path at the cursor position. Allows up to
six errors in the name. Can also be called with an argument to
correct a filename path, independently of zle; the correction is
printed on standard output.
_correct_word (^Xc)
Performs correction of the current argument using the usual con‐
textual completions as possible choices. This stores the string
`correct-word' in the function field of the context name and
then calls the _correct completer.
_expand_alias (^Xa)
This function can be used as a completer and as a bindable com‐
mand. It expands the word the cursor is on if it is an alias.
The types of aliases expanded can be controlled with the regu‐
lar, global and disabled styles.
When used as a bindable command there is one additional feature
that can be selected by setting the complete style to `true'.
In this case, if the word isn't the name of an alias,
_expand_alias tries to complete the word to a full alias name
without expanding it (but leaving the cursor directly after the
completed word so that invoking _expand_alias once more will
expand the now-complete alias name).
_expand_word (^Xe)
Performs expansion on the current word: equivalent to the stan‐
dard expand-word command, but using the _expand completer.
Before calling it, the function field is set to `expand-word'.
_generic
This function is not defined as a widget and not bound by
default. However, it can be used to define a widget and will
then store the name of the widget in the function field of the
context and call the completion system. This allows custom com‐
pletion widgets with their own set of style settings to be eas‐
ily defined. For example, to define a widget that does normal
completion and starts menu selection, one could do:
zle -C foo complete-word _generic
bindkey '...' foo
zstyle ':completion:foo:*' menu yes select=1
_history_complete_word (\e/)
Complete words from the shell's command history. This uses the
list, remove-all-dups, sort, and stop styles.
_most_recent_file (^Xm)
Complete the name of the most recently modified file matching
the pattern on the command line (which may be blank). If given
a numeric argument N, complete the Nth most recently modified
file. Note the completion, if any, is always unique.
_next_tags (^Xn)
This command alters the set of matches used to that for the next
tag, or set of tags, either as given by the tag-order style or
as set by default; these matches would otherwise not be avail‐
able. Successive invocations of the command cycle through all
possible sets of tags.
_read_comp (^X^R)
Prompt the user for a string, and use that to perform completion
on the current word. There are two possibilities for the
string. First, it can be a set of words beginning `_', for
example `_files -/', in which case the function with any argu‐
ments will be called to generate the completions. Unambiguous
parts of the function name will be completed automatically (nor‐
mal completion is not available at this point) until a space is
typed.
Second, any other string will be passed as a set of arguments to
compadd and should hence be an expression specifying what should
be completed.
A very restricted set of editing commands is available when
reading the string: `DEL' and `^H' delete the last character;
`^U' deletes the line, and `^C' and `^G' abort the function,
while `RET' accepts the completion. Note the string is used
verbatim as a command line, so arguments must be quoted in
accordance with standard shell rules.
Once a string has been read, the next call to _read_comp will
use the existing string instead of reading a new one. To force
a new string to be read, call _read_comp with a numeric argu‐
ment.
_complete_debug (^X?)
This widget performs ordinary completion, but captures in a tem‐
porary file a trace of the shell commands executed by the com‐
pletion system. Each completion attempt gets its own file. A
command to view each of these files is pushed onto the editor
buffer stack.
_complete_help (^Xh)
This widget displays information about the context names, the
tags, and the completion functions used when completing at the
current cursor position. If given a numeric argument other than
1 (as in `ESC-2 ^Xh'), then the styles used and the contexts for
which they are used will be shown, too.
Note that the information about styles may be incomplete; it
depends on the information available from the completion func‐
tions called, which in turn is determined by the user's own
styles and other settings.
_complete_tag (^Xt)
This widget completes symbol tags created by the etags or ctags
programmes (note there is no connection with the completion sys‐
tem's tags) stored in a file TAGS, in the format used by etags,
or tags, in the format created by ctags. It will look back up
the path hierarchy for the first occurrence of either file; if
both exist, the file TAGS is preferred. You can specify the
full path to a TAGS or tags file by setting the parameter $TAGS‐
FILE or $tagsfile respectively. The corresponding completion
tags used are etags and vtags, after emacs and vi respectively.
UTILITY FUNCTIONS
Descriptions follow for utility functions that may be useful when writ‐
ing completion functions. Most of these reside in the Base subdirec‐
tory. Like the example functions for commands in the distribution, the
utility functions generating matches all follow the convention of
returning zero if they generated completions and non-zero if no match‐
ing completions could be added.
When writing completion functions or other ZLE widgets that call com‐
pletion, it might be interesting to know about two more features
offered by the _main_complete function. The arrays compprefuncs and
comppostfuncs may be set to contain names of functions that are to be
called immediately before or after completion has been tried. The func‐
tions will only be called once, unless they put themselves into the
arrays again.
_all_labels [ -12VJ ] tag name descr [ command args ... ]
This is a convenient interface to the _next_label function
below, implementing the loop shown in the _next_label example.
The command is the one that should be called to generate the
matches. The options stored in the parameter name will automati‐
cally be inserted into the args given to the command. Normally,
they are put directly after the command, but if one of the args
is a single hyphen, they are inserted directly before that. If
the hyphen is the last argument, that will be removed from the
argument list before the command is called. This allows
_all_labels to be used in almost all cases where the matches can
be generated by a single call to the compadd builtin command or
by a call to one of the utility functions.
For example:
local expl
...
if _requested foo; then
...
_all_labels foo expl '...' compadd ... - $matches
fi
Will complete the strings from the matches parameter, using com‐
padd with additional options which will take precedence over
those generated by _all_labels.
_alternative [ -C name ] specs ...
This function is useful in simple cases where multiple tags are
available. Essentially, it implements a loop like the one
described for the _tags function above.
The tags to use and the action to perform if a tag is requested
are described using the specs which are of the form:
`tag:descr:action'. The tags are offered using _tags and if the
tag is requested, the action is executed with the given descrip‐
tion descr. The actions supported are those used by the _argu‐
ments function (described below), without the `->state' and
`=...' forms.
For example, the action may be a simple function call. With that
one could do:
_alternative \
'users:user:_users' \
'hosts:host:_hosts'
to offer usernames and hostnames as possible matches (which are
generated by the _users and _hosts functions respectively).
Note that, like _arguments this will also use _all_labels to
execute the actions, so one doesn't need to call that explicitly
unless another tag is to be used, for example in a function
called from _alternative.
Like _tags this function supports the -C option to give a dif‐
ferent name for the argument context field.
_arguments spec ...
This function can be used to complete words on the line by
describing the options and arguments which may be passed to the
command for which completion is being performed. The descrip‐
tion is given as arguments to this function, with each spec
describing one option or normal argument of the command. The
forms of spec understood are:
n:message:action
n::message:action
This describes the n'th normal argument. The message
will be printed above the matches generated and the
action says what can be completed in this position (see
below). If there are two colons before the message, this
describes an optional argument. If the message contains
only white space, nothing will be printed above the
matches unless the action adds an explanation string
itself.
:message:action
::message:action
Like the previous one, but describing the next argument.
I.e. if you want to describe all arguments a command can
get, you can leave out the numbers in the description and
just use this form to describe them one after another in
the order they have to appear on the line.
*:message:action
*::message:action
*:::message:action
This describes how arguments (usually non-option argu‐
ments, those not beginning with - or +) are to be com‐
pleted when no description with one of the first two
forms was given. This also means that any number of argu‐
ments can be completed.
With two colons before the message, the words special
array and the CURRENT special parameter are modified to
refer only to the normal arguments when the action is
executed or evaluated. With three colons before the mes‐
sage they are modified to refer only to the normal argu‐
ments covered by this description.
optspec[description ...]
This describes an option and (if description is given)
the arguments that have to come after the option. If no
description is given, this means to offer only the option
name as a possible completion in the right places. (Note
that the brackets, above, around description, indicate
that zero or more descriptions may appear; but the brack‐
ets are not themselves part of this format. If brackets
are used, they are part of the optspec; see below.)
In the descriptions below, the option names represented
by optname are normally taken to be multi-character
names, and a word from the line is considered to contain
only one option (or none). By giving the -s option to
_arguments before the first spec, each optname is consid‐
ered to be a single character and each word from the line
may contain more than one such option letter. However,
words beginning with two hyphens (like `--prefix') are
still considered to contain only one option name. This
allows the use of the `-s' option to describe single-let‐
ter options together with such long option names.
The -s option may be combined with the option -w to say
that more option characters are to be expected even after
an option that takes an argument. For example, if a com‐
mand takes the options `a' and `b', where `a' takes an
argument in the next word, _arguments would normally not
complete the other option directly after `-a', but it
would allow that if given the -w option.
Similarly, the option -W may be given together with -s to
force completion of single-letter options even after
options that get an argument in the same word. For exam‐
ple, if a command takes the options `a' and `b', where
`a' needs an argument in the same word, directly after
the option character, _arguments would normally only exe‐
cute the action for that argument and not offer other
single-letter options as possible completions. If given
the -W option, it will offer other options as possible
completions after executing the action for the argument.
Note that, depending on the action, this may mean that
the other options can't really be completed, but at least
they will be listed. For more control, use an utility
function like _guard in the argument's action.
The forms of optspec are:
*optspec
If the option may be given more than once, a star
(`*') must be added in front of one of the follow‐
ing forms of optspec. Otherwise, if the option is
already on the line and to the left of the cursor,
it is not offered as a possible completion again.
-optname
+optname
In the simplest form the optspec is just the
option name beginning with a minus or a plus sign,
such as `-foo'. The first argument for the option
(if any) must follow as a separate word directly
after the option.
If the command accepts the option with either a
leading minus or a leading plus sign, use either
`-+optname' or `+-optname' to define both variants
at once.
In all the following forms, the leading `-' may be
replaced or paired with `+' in this way.
-optname-
The first argument of the option must come
directly after the option name in the same word,
as in `-foo-:...'.
-optname+
The first argument may appear immediately after
optname in the same word, or may instead appear as
a separate word after the option.
-optname=
The argument may appear as the next word, or in
same word as the option name provided that it is
separated from it by an equals sign.
-optname=-
The argument to the option must appear after an
equals sign in the same word, and may not be given
in the next argument.
optspec[explanation]
An explanation string may be appended to any of
the preceding forms of optspec by enclosing it in
brackets, as in `-q[query operation]'.
The verbose style is used to decide if these
explanation strings should be displayed with the
option in a completion listing.
If no bracketed explanation string is given but
the auto-description style is set and only one
argument is described for this optspec, the value
of the style is displayed, with any appearance of
the sequence `%d' in it replaced by the message of
the first description that follows the optspec;
see below.
Note that the special meaning of a leading or trailing - or + in
optspec means that when the command to be completed accepts
options like `-+' or `-=', the second character has to be quoted
with a backslash, as in `-\+'.
Each description following an optspec must take one of the fol‐
lowing forms:
:message:action
::message:action
Describes a mandatory argument with one colon, or an
optional argument with two colons. As in other forms of
spec, the message will be printed above the matches gen‐
erated (unless it contains only white space, see above)
and the action says what can be completed in this posi‐
tion.
:*pattern:message:action
:*pattern::message:action
:*pattern:::message:action
This describes multiple arguments. Only the last
description may be given in this form. If the pattern is
empty (i.e., :*:), all following words on the line are to
be completed as described by the action; otherwise, all
words up to a word matching the pattern are to be com‐
pleted using the action.
When the message is preceded by two colons, the words
special array and the CURRENT special parameter are modi‐
fied during the execution or evaluation of the action to
refer only to the words after the option. When preceded
by three colons, they are modified to refer only to the
words covered by this description.
Note that only one such `:*'-specification is useful and
no other argument specification may be given after it.
To include a colon in any optname, message, or action anywhere above,
it has to be preceded by a backslash, as `\:'.
Each of the six forms of spec (yes, there are six, keep track of the
nestings) may be preceded by a list of option names and argument num‐
bers with which the option or argument described is mutually exclusive.
This list is given in parentheses, as in `(-two -three 1)-one:...' or
`(-foo):...'. In the first example, the options `-two' and `-three'
and the first argument will not be offered as possible completions if
the option `-one' is on the line before the cursor, and in the second
example the option `-foo' will not be offered if the argument described
by the specification is on the line.
The list may also contain a single star (*) as one of its elements to
specify that the description for the rest arguments (i.e. a specifica‐
tion of the form `*:...') should not be used, a colon (:) to specify
that the descriptions for all normal (non-option-) arguments should not
be used and a hyphen (-) to specify that the descriptions for all
options should not be used. This paragraph desperately needs rewrit‐
ing.
To simplify writing writing functions that call _arguments more than
once, the specs may also start with the character `!' (exclamation
mark) to make the spec not be completed. However, if this is used with
one of the forms describing options, the option (and its arguments, if
it takes any) will be understood and skipped if they appear on the com‐
mand line. It's just that the option itself will not be completed.
This is intended to be used with an array containing the options used
in the first call to arguments. The second call can then use
`\!${^global_options}' to ignore those options and complete only the
ones understood in the current context.
In every case above, the action determines how the possible completions
should be generated. In places where no sensible matches can be gener‐
ated, the action should consist of only a space. This will make the
message be displayed but no possible completions listed. Note that even
in this case the colon at the end of the message is needed. The only
case where it can be left is when neither a message, nor a action is
given.
Except for the `->string' form below, the action will be executed by
calling the _all_labels function to process all tag labels, so one
doesn't need to call that explicitly unless another tag is to be used,
for example in a function called in the action.
When only one of a fixed set of strings can be completed, the action
can consist of these strings as a list in parentheses, as in:
:foo:(foo bar baz)
Such a list in doubled parentheses should contain strings consisting of
the string to complete followed by `\:' and a description, as in:
:foo:((a\:bar b\:baz))
The matches will be listed together with their descriptions if the
description style for the values tag is set.
An action of the form `->string' is used by functions that implement a
state machine. In this case, the `string's (with all leading and trail‐
ing spaces and tabs removed) of all actions that have to be used will
be stored in the global array state. The function returns with a
non-zero return value if the cursor is not in a position where options
can be completed or if the current word could not be completed to an
option. But if the -R option is given to _arguments, the function will
instead return with a return value of 300 (to make it distinguishable
from other return values) after setting the global `context', `line'
and `opt_args' parameters as described below, and without resetting any
changes made to the special parameters such as PREFIX and words. This
enables wrapper functions around _arguments to be able to find out if
they have to make sure that the special completion parameters are not
reset when they return.
Note that this means that a function calling _arguments with at least
one action containing such a `->string' has to declare appropriate
local parameters as in:
local context state line
typeset -A opt_args
This will ensure that _arguments does not create unused global parame‐
ters.
A string in braces is evaluated to generate the matches and if the
action does not begin with an opening parentheses or brace, it is also
split into separate words and executed. If the action starts with a
space, this list of words will be invoked unchanged, otherwise it will
be invoked with some extra strings placed after the first word which
can be given as arguments to the compadd builtin command and which make
sure that the message given in the description will be shown above the
matches. These arguments are taken from the array parameter `expl'
which will be set up before executing the action and hence may be used
in it (normally in an expansion like `$expl[@]').
If the action starts with `= ' (an equals sign followed by a space),
_arguments will insert the contents of the argument field of the cur‐
rent context as the new first element in the words special array and
increments the value of the CURRENT special parameter. In other words,
it inserts a dummy element in the words array and makes CURRENT still
point to the word in that array where the cursor is. This is only
really useful when used with one of the forms that make _arguments mod‐
ify the words array to contain only some of the words from the line,
i.e. one of the argument description forms where the message is pre‐
ceded by two or three colons. For example, when the function called in
the action for such an argument itself uses _arguments, the dummy ele‐
ment is needed to make that second call to _arguments use all words
from the restricted range for argument parsing. Without the inserted
dummy element, the first word in the range would be taken (by the sec‐
ond _arguments) to be the command name and hence ignored.
During the evaluation or execution of the action the array `line' will
be set to the command name and normal arguments from the command line,
i.e. to the words from the command line excluding all options and their
arguments. These are stored in the associative array `opt_args', using
the option names as keys and their arguments as the values. For options
that have more than one argument these are given as one string, sepa‐
rated by colons. All colons in the original arguments are preceded with
backslashes.
The parameter `context' (set only in the calling function when using an
action of the form `->string', not during the evaluation of other
actions) is set to the automatically created context names. These are
either strings of the form `option-opt-n' for the n'th argument of the
option -opt, or strings of the form `argument-n' for the n'th argument
(for rest arguments the n is the string `rest'). For example, when com‐
pleting the argument of the -o option, the name is `option-o-1' and for
the second normal (non-option-) argument it is `argument-2'.
Also, during the evaluation of the action, the context name in the cur‐
context parameter is changed by appending the same string that is
stored in the context parameter.
It is also possible to specify multiple sets of options and arguments
with the sets separated by single hyphens. The specifications before
the first hyphen are shared by all sets given after the first hyphen.
The first word in every other set gives the name of the set. This name
may appear in exclusion lists in the specifications, either alone or
before one of the possible values described above (with a `-' between
the name and the rest).
For example:
_arguments \
-a \
- set1 \
-c \
- set2 \
-d \
':arg:(x2 y2)'
This defines two sets. When the command line contains the option `-c',
the `-d' option and the argument will not be considered possible com‐
pletions. When it contains `-d' or an argument, the option `-c' will
not be completed any more, but if `-a' is given, both sets will still
be considered valid, because it appears before the first hyphen, so
both sets contain this option.
If the name-string is of the form `(name)' then all specifications in
the set have an implicit exclusion list containing the name of the set,
i.e. all specifications are mutual exclusive with all other specifica‐
tions in the same set. This is useful for defining multiple sets of
options which are mutually exclusive and in which the options are
aliases for each other. E.g.:
_arguments \
-a -b \
- '(compress)' \
{-c,--compress}'[compress]' \
- '(uncompress)' \
{-d,--decompress}'[decompress]'
Note that using multiple sets will be slower than using only one set
because the completion code has to parse the command line once for
every set. So more than one set should only be used if the command syn‐
tax is too complicated. Note also that an option specification with
rest-arguments (as in `-foo:*:...') often allows the use of multiple
sets to be avoided.
To simplify the specifications for commands with standard option pars‐
ing, the options -S and -A may be given. With -S, no option will be
completed after a `--' on the line and this argument will otherwise be
ignored. With -A, no options will be completed after the first
non-option argument on the line. The -A has to be followed by a pat‐
tern matching all strings which are not to be taken as arguments. For
example, to make _arguments stop completing options after the first
normal argument, but ignoring all strings starting with a hyphen even
if they are not described by one of the optspecs, one would use: `-A
"-*"'.
Another option supported is `-O name'. The name will be taken as the
name of an array and its elements will be given to functions called to
generate matches when executing the actions. For example, this allows
one to give options for the compadd builtin that should be used for all
actions.
Also, the -M option followed by a string may be given before the first
description. The string will be used as the match specification when
completing option names and values instead of the default `r:|[_-]=*
r:|=*'.
Finally, the option -C can be given to make _arguments modify the cur‐
context parameter when an action of the form `->state' is used. This
parameter is used to keep track of the current context and in this case
it (and not the parameter context as explained above) has to be made
local to make sure that calling functions don't use the modified value.
Also, the local version of curcontext has to be initialised with the
old value as in:
local curcontext="$curcontext"
The function can also be made to automatically complete long options
for commands that support the `--help' option as, for example, most of
the GNU commands do. For this, the string `--' must be given as one
argument and if it is, the command from the line is invoked with the
`--help' option and its output is parsed to find possible option names.
Note that this means that you should be careful to make sure that this
feature is not used for a command that does not support this option.
For such automatically found options that get an argument after an `=',
the function also tries to automatically find out what should be com‐
pleted as the argument. The possible completions for option-arguments
can be described with the arguments after the `--' (which are not used
as described above). Each argument contains one description of the form
`pattern:message:action'. The message and the action have the same for‐
mat as for the normal option descriptions described above. The action
will be executed to complete arguments of options whose description in
the output of the command from the line with the `--help' option
matches the pattern. For example:
_arguments -- '*\*:toggle:(yes no)' \
'*=FILE*:file:_files' \
'*=DIR*:directory:_files -/'
Here, `yes' and `no' will be completed as the argument of options whose
description ends in a star, file names for options that contain the
substring `=FILE' in the description, and paths for options whose
description contains `=DIR'. In fact, the last two patterns are not
needed since this function always completes files for option descrip‐
tions containing `=FILE' and paths for option descriptions that contain
`=DIR' or `=PATH'. These builtin patterns can be overridden by patterns
given as arguments, however.
Note also that _arguments tries to find out automatically if the argu‐
ment for an option is optional. If it fails to automatically detect
this, the colon before the message can be doubled to tell it about this
as described for the normal option descriptions above.
If the pattern ends in `(-)', this will removed from the pattern and
the action will be used only directly after the `=', not in the next
word. I.e., this is like a normal specification as described above
using `=-'.
The option `-i patterns' (which must be given after the `--') can be
used to give patterns for options which should not be completed. The
patterns can be given as the name of an array parameter or as a literal
list in parentheses. E.g. `-i "(--(en|dis)able-FEATURE*)"' will make
the options `--enable-FEATURE' and `--disable-FEATURE' be ignored. The
option `-s pairs' (again, after the `--') can be used to describe
option aliases. Each pair consists of a pattern and a replacement. E.g.
some configure-scripts describe options only as `--enable-foo', but
also accept `--disable-foo'. To allow completion of the second form,
one would use `-s "(#--enable- --disable-)"'.
Example:
_arguments '-l+:left border:' \
'-format:paper size:(letter A4)' \
'*-copy:output file:_files::resolution:(300 600)' \
':postscript file:_files -g \*.\(ps\|eps\)' \
'*:page number:'
This describes three options: `-l', `-format', and `-copy'. The first
one gets one argument described as `left border' for which no comple‐
tion will be offered because of the empty action. The argument may come
directly after the `-l' or it may be given as the next word on the
line. The `-format' option gets one argument (in the next word)
described as `paper size' for which only the strings `letter' and `A4'
will be completed. The `-copy' option differs from the first two in
that it may appear more than once on the command line and in that it
accepts two arguments. The first one is mandatory and will be completed
as a filename. The second one is optional (because of the second colon
before the description `resolution') and will be completed from the
strings `300' and `600'.
The last two descriptions say what should be completed as arguments.
The first one describes the first argument as a `postscript file' and
makes files ending in `ps' or `eps' be completed. The last description
says that all other arguments are `page numbers' but does not give pos‐
sible completions.
_cache_invalid cache_identifier
This function returns 0 if the completions cache corresponding
to the given cache identifier needs rebuilding. It determines
this by looking up the cache-policy style for the current con‐
text, and if it exists, runs the function of the same name, sup‐
plying the full path to the relevant cache file as the only
argument.
Example:
_example_caching_policy () {
# rebuild if cache is more than a week old
oldp=( "$1"(Nmw+1) )
(( $#oldp ))
}
_call_function return name [ args ... ]
If a function name exists, it is called with the arguments args.
Unless it is the empty string or a single hyphen, return is
taken as the name of a parameter and the return status from the
called function is stored in it. The return value of
_call_function itself is zero if the function name exists and
was called and non-zero otherwise.
_call_program tag string ...
This function is used in places where a command is called, mak‐
ing it possible for the user to override the default command
call. It looks up the command style with the supplied tag. If
the style is set, its value is used as the command to execute.
In any case, the strings from the call to _call_program or from
the style are concatenated with spaces between them and the
resulting string is evaluated. The return value is the return
value of the command called.
_combination [ -s pattern ] tag style specs ... field opts ...
This function is used to complete combinations of values such as
pairs of hostnames and usernames. The possible values will be
taken from the style whose name is given as the second argument.
The first argument is the tag to use to do the lookup.
The style name should consist of multiple parts separated by
hyphens which are then used as field names. Known values for
such fields can be given after the second argument in arguments
of the form `field=pattern'. The first argument without an
equals sign is taken as the name of the field for which comple‐
tions should be generated.
The matches generated will be taken from the value of the style.
These values should contain the possible values for the combina‐
tions where the values for the different fields are separated by
colons or characters matching the pattern given after the -s
option to _combination; normally this is used to define charac‐
ter classes like the `-s "[:@]"' used for the users-hosts style.
Only the values for the requested fields for which the patterns
given in the `field=pattern' match the respective fields in the
strings from the style value are generated as possible matches.
If no style with the given name is defined for the given tag but
a function named with the name of the requested field preceded
by an underscore is defined, that function will be called to
generate the matches. This is also done if none of the strings
in the value of the style match all the patterns given as argu‐
ments.
If the same name is used for more than one field, in both the
`field=pattern' and the argument that gives the field name to
complete for, the number of the field (starting with one) may be
given after the fieldname, separated from it by a colon.
All arguments after the requested field name are passed to com‐
padd when generating matches from the style value, or to the
functions for the fields if they are called.
_contexts names ...
This function looks up the definitions for the context and com‐
mand names given as arguments and calls the handler functions
for them if there is a definition (given with the compdef func‐
tion). For example, the function completing inside subscripts
might use `_contexts -math-' to include the completions gener‐
ated for mathematical environments.
_describe [ -o ] descr name1 [ name2 ] opts ... -- ...
This function is useful for preparing a list of command options
or arguments, together with their descriptions descr, as
matches. Multiple groups separated by -- can be supplied,
potentially with different completion options opts.
The descr is taken as a string to display above the matches if
the format style for the descriptions tag is set. After this
come one or two names of arrays followed by options to pass to
compadd. The first array contains the possible completions with
their descriptions in the form `completion:description'. If a
second array is given, it should have the same number of ele‐
ments as the first one and the corresponding elements are added
as possible completions instead of the completion strings from
the first array. The completion list will retain the descrip‐
tions from the first array. Finally, a set of completion
options can appear.
If the option `-o' appears before the first argument, the
matches added will be treated as option names (typically follow‐
ing a `-', `--' or `+' on the command line). This makes
_describe use the prefix-hidden, prefix-needed and verbose
styles to find out if the strings should be added at all and if
the descriptions should be shown. Without the `-o' option, only
the verbose style is used.
_describe uses the _all_labels function to generate the matches,
so it does not need to appear inside a loop over tag labels.
_description [ -12VJ ] tag name descr [ specs ... ]
This function is called before completions are added (typically
by a call to compadd); it tests various styles and arranges for
any necessary options to be passed on to compadd. The styles
are tested in the current context using the given tag; options
are put into the array called name for passing on to compadd;
the description for the current set of matches is passed in
descr. The styles tested are: format (which is first tested for
the given tag and then for the descriptions tag if that isn't
defined), hidden, matcher, ignored-patterns and group-name (the
last are tested only for the tag given as the first argument).
This function also calls the _setup function which tests some
more styles.
The string returned by the format style (if any) will be modi‐
fied so that the sequence `%d' is replaced by the descr given as
the third argument without any leading or trailing white space.
If, after removing the white space, the descr is the empty
string, the format style will not be used and the options put
into the name array will not contain an explanation string to be
displayed above the matches. If _description is called with
more than three arguments, the additional specs should be of the
form `char:str' and every appearance of `%char' in the format
string will be replaced by string.
The options placed in the array will also make sure that the
matches are placed in a separate group, depending on the value
of the group-name style. Normally a sorted group will be used
for this (with the `-J' option), but if an option starting with
`-V', `-J', `-1', or `-2' is given, that option will be included
in the array, so that it is possible to make the group unsorted
by giving the option `-V', `-1V', or `-2V'.
In most cases, the function will be used like this:
local expl
_description files expl file
compadd "$expl[@]" - "$files[@]"
Note the use of the parameter expl, the hyphen, and the list of
matches. Almost all calls to compadd within the completion sys‐
tem use a similar format; this ensures that user-specified
styles are correctly passed down to the builtins which implement
the internals of completion.
_files The function _files uses the file-patterns style and calls
_path_files with all the arguments it was passed except for -g
and -/. These two options are used depending on the setting of
the file-patterns style.
See _path_files below for a description of the full set of
options accepted by _files.
_gnu_generic
This function is a simple wrapper around the _arguments function
described above. It can be used to automatically complete long
options for commands that understand the `--help' option. It is
not intended to be used from completion functions but as a
top-level completion function in its own right. For example, to
enable option completion for the commands foo and bar, one would
call:
compdef _gnu_generic foo bar
in one of the initialization files after the call to compinit.
The default installation uses this function only to generate
completions for some GNU-commands because to complete the
options, the command has to be called and hence it shouldn't be
used if one can't be sure that the command understands the
`--help' option.
_guard [ options ] pattern [ descr ]
This function is intended to be used in an action of functions
like _arguments. It returns immediately with a non-zero return
value if the string to be completed does not match the pattern.
If the pattern matches, the descr is displayed and the function
returns zero if the word to complete is not empty and non-zero
otherwise.
The pattern may be preceded by those options understood by com‐
padd that are passed down from _description, namely -M, -J, -V,
-1, -2, -n, -F and -X. All of these options, except -X, will be
ignored. If the -X option appears, the description following it
will be used as the string to display if the pattern matches,
unless the option descr is given to _guard itself, which will
then take precedence.
As an example, consider a command taking the options -n and
-none, where -n has to be followed by a numeric value in the
same word. By using either of:
_argument '-n-:numeric value:_guard "[0-9]#"' '-none'
or
_argument '-n-: :_guard "[0-9]#" "numeric value"' '-none'
_arguments can be made to both display the message `numeric
value' and complete options after `-n<TAB>'. If the `-n' is
already followed by one or more digits (matching the pattern
given to _guard), only the message will be displayed and if the
`-n' is followed by another character, only options are com‐
pleted.
_message [ -r ] descr
The descr is used like the third argument to the _description
function. However, the resulting string will always be shown
whether or not matches were generated. This is useful to display
help texts in places where no completions can be generated auto‐
matically.
This function also uses the format style for the messages tag in
preference to the format style for the descriptions tag. The
latter is used only if the former is unset.
If the -r option is given, no style is used and the descr is
used literally as the string to display. This is only used in
cases where that string is taken from some pre-processed argu‐
ment list containing an expanded description.
_multi_parts sep array
This function receives two arguments: a separator character and
an array. As usual, the array may be either the name of an
array parameter or a literal array in the form `(foo bar)' (i.e.
a list of words separated by white space in parentheses). With
these arguments, this function will complete to strings from the
array where the parts separated by the separator character are
completed independently. For example, the _tar function from
the distribution caches the pathnames from the tar file in an
array, and then calls this function to complete these names in
the way normal filenames are completed by the _path_files func‐
tion, by using `_multi_parts / patharray'.
If the -i option is present, then any time there is a unique
match it will immediately be inserted even if that requires
additional separators to be inserted as well. When completing
from a fixed set of possible completions which are really words,
this is often the expected behaviour; however, if _multi_parts
should behave like completing pathnames, the -i option should
not be used.
Like other utility functions, this function accepts the `-V',
`-J', `-1', `-2', `-n', `-f', `-X', `-M', `-P', `-S', `-r',
`-R', and `-q' options and passes them to the compadd builtin.
_next_label [ -12VJ ] tag name descr [ options ... ]
This function should be called repeatedly to generate the tag
labels. On each call it will check if another tag label is to be
used and, if there is at least one, zero is returned. If no more
tag labels are to be used, a non-zero status is returned.
The -12JV options and the first three arguments are given to the
_description function using the tag label instead of the first
argument as appropriate. The options given after the descr
should be other options to be used for compadd or whatever func‐
tion is to be called to add the matches. _next_label will store
these options in the parameter whose name is given as the second
argument. This is done in such a way that the description given
by the user to the tag-order style is preferred over the one
given to _next_label.
Note that this function must not be called without a previous
call to _tags or _requested because it uses the tag label for
the current tag found by these functions.
A normal use of this function for the tag labels of the tag foo
looks like this:
local expl ret=1
...
if _requested foo; then
...
while _next_label foo expl '...'; do
compadd "$expl[@]" ... && ret=0
done
...
fi
return ret
_normal
This function is used for normal command completion. It has two
tasks: completing the first word on the command line as the name
of a command, and completing the arguments to this command. In
the second case, the name of the command is looked up to see if
special completions exists, including completions defined for
patterns which match the name. If none is found, completion is
performed for the context -default-.
The function can also be called by other completion functions
which need to treat a range of words as a command line. For
example, the function to complete after the pre-command speci‐
fiers such as nohup removes the first word from the words array,
decrements the CURRENT parameter, then calls _normal again, with
the effect that `nohup cmd ...' is treated the same way was
`cmd ...'.
If the command name matches a pattern, the parameter _compskip
is checked after the call to the corresponding completion func‐
tion. This has the same effect here as in the -first- context:
if it is set, no more completion functions are called even if
there are no matches so far.
_options
This can be used to complete option names. It uses a matching
specification that ignores a leading `no', ignores underscores
and allows the user to type upper-case letters which will match
their lower-case counterparts. All arguments passed to this
function are propagated unchanged to the compadd builtin.
_options_set and _options_unset
These functions complete only set or unset options, with the
same matching specification used in the _options function.
Note that you need to uncomment a few lines in the _main_com‐
plete function for these functions to work properly. The lines
in question are used to store the option settings in effect
before the completion widget locally sets the options it needs.
Hence these options are not generally used by the completion
system.
_parameters
This should be used to complete parameter names. _parameters
can take a -g pattern option which specifies that only parame‐
ters whose type matches the pattern should be completed.
Strings of the same form as those returned by the t parameter
expansion flag are used here when matching the type. All other
arguments are passed unchanged to the compadd builtin.
_path_files
The function _path_files is used throughout the completion sys‐
tem to complete filenames. It allows completion of partial
paths. For example, the string `/u/i/s/sig' may be completed to
`/usr/include/sys/signal.h'.
The options accepted by both _path_files and _files are:
-f Complete all filenames. This is the default.
-/ Specifies that only directories should be completed.
-g pattern
Specifies that only files matching the pattern should be
completed.
-W paths
Specifies path prefixes that are to be prepended to the
string from the line to generate the filenames but that
should not be inserted in the line or shown in a comple‐
tion listing. Here, paths may be the name of an array
parameter, a literal list of paths enclosed in parenthe‐
ses or an absolute pathname.
-F This option from the compadd builtin gives direct control
over which filenames should be ignored. If the option is
not present, the ignored-patterns style is used.
These functions also accept the `-J', `-V', `-1', `-2', `-n',
`-X', `-M', `-P', `-S', `-q', `-r', and `-R' options from the
compadd builtin.
Finally, the _path_files function uses the styles expand,
ambiguous, special-dirs, list-suffixes and file-sort.
_regex_arguments name specs ...
This function is a compiler to generate a completion function.
The first argument specifies the name of the generated function
while the remaining arguments specify a completion as a set of
regular expressions with actions. The generated function has
the structure of a finite-state machine whose states correspond
to the state (i.e. the context) of the completion. This state
machine uses a command line, which comes from the concatenation
of the words array up to the current cursor position using null
characters as separators with no extra quotation. This is ana‐
lysed and at the end the appropriate action is executed.
Specification arguments take one of following forms, in which
metacharacters such as `(', `)', `#' and `|' should be quoted.
/pattern/ [%lookahead%] [-guard] [:tag:descr:action]
This is a primitive element, corresponding to one state
of the compiled state machine. The state is entered if
`(#b)((#B)pattern)(#B)lookahead*' matches the command
line string. If it matches, `guard' is evaluated and its
return status is examined; if this is successful, the
state is entered, otherwise the test fails and other can‐
didates are tried. The pattern string `[]' is guaranteed
never to match.
If the test succeeds and the state is entered, the left
part of the command line string matched as pattern is
removed and the next state is tried, proceeding from
inside to outside and from left to right.
If no test succeeds and the remaining command line string
contains no null character, the completion target is
restricted to the remainder of the command line string
and actions for the target are executed. In this case,
nothing is actually removed from the command line string
so that any previous or neighbouring state may also have
actionss. actionss evaluation are ordered by the
tag-order style and specified tag by _alternative. So,
the various formats supported by _alternative can be used
in action. descr is used for setting up the array param‐
eter expl.
/pattern/+ [%lookahead%] [-guard] [:tag:descr:action]
This is similar to `/pattern/ ...' but the left part of
the command line string is also considered as part of the
completion target.
/pattern/- [%lookahead%] [-guard] [:tag:descr:action]
This is similar to `/pattern/ ...' but the actions of the
current and previous states are ignored even if the fol‐
lowing state's `pattern' matches the empty string.
( spec )
This groups specs.
spec # This allows any number of repetitions of spec.
spec spec
This represents the concatenation of two specs.
spec | spec
Either of the two specs can be matched.
_requested [ -12VJ ] tag [ name descr [ command args ... ] ]
This function is called to decide whether a tag already regis‐
tered by a call to _tags (see below) is requested and hence com‐
pletion should be performed for it; it returns status zero if
the tag is requested and non-zero otherwise. This will usually
be done in a loop such as the following:
_tags foo bar baz
while _tags; do
if _requested foo; then
... # perform completion for foo
fi
... # test the tags bar and baz in the same way
... # exit loop if matches were generated
done
Note that the test for whether matches were generated is not
performed until the end of the _tags loop. This is so that the
user can specify a set of tags to be tested at the same time in
the tag-order parameter.
If the name and the descr are given, _requested calls the
_description function with these arguments, including the
options.
If the command is given, the _all_labels function will be called
immediately with the same arguments. This is often useful to do
both the testing of the tag, getting the description for the
matches and adding the matches at once. For example:
local expl ret=1
_tags foo bar baz
while _tags; do
_requested foo expl 'description' \
compadd foobar foobaz && ret=0
...
(( ret )) || break
done
Note that this means that the command has to accept the options
that have to be passed down to compadd.
_retrieve_cache cache_identifier
This function retrieves completion information from the file
given by cache_identifier, stored in a directory specified by
the cache-path style (defaults to ~/.zsh/cache). The return
value is zero if retrieval was successful. It will only attempt
retrieval if the use-cache style is set, so you can call this
function without worrying about whether the user wanted to use
the caching layer.
See _store_cache below for more details.
_sep_parts
This function is passed alternating arrays and separators as
arguments. The arrays specify completions for parts of strings
to be separated by the separators. The arrays may be the names
of array parameters or a quoted list of words in parentheses.
For example, with the array `hosts=(ftp news)' the call
`_sep_parts '(foo bar)' @ hosts' will complete the string `f'
to `foo' and the string `b@n' to `bar@news'.
This function passes the `-V', `-J', `-1', `-2', `-n', `-X',
`-M', `-P', `-S', `-r', `-R', and `-q' options and their argu‐
ments to the compadd builtin used to add the matches.
_setup tag [ group ]
This function expects a tag as its argument and sets up the spe‐
cial parameters used by the completion system appropriately for
the tag, using styles such as list-colors and last-prompt.
The optional group gives the name of the group in which the
matches will be placed. If it is not given, the tag is used as
the group name.
Note that this function is called automatically from _descrip‐
tion so that one normally doesn't have to call it explicitly.
_store_cache cache_identifier vars ...
This function, when combined with _retrieve_cache and
_cache_invalid, makes it easy to implement a caching layer for
your completion functions. If a completion function needs to
perform a costly operation in order to generate data which is
used to calculate completions, you can store that data in vari‐
ables, and use this function to dump the values of those vari‐
ables to a file. Then, if they are needed in subsequent shell
invocations, they can be retrieved quickly from that file via
_retrieve_cache, avoiding the need for repeating the costly
operation.
The cache_identifier specifies the file which the data should be
dumped to, and is stored in a directory specified by the
cache-path style (defaults to ~/.zsh/cache). The remaining vars
arguments are the variables to dump to the file.
The return value is zero if storage was successful. The func‐
tion will only attempt storage if the use-cache style is set, so
you can call this function without worrying about whether the
user wanted to use the caching layer.
If your completion function avoids calling _retrieve_cache when
it already has the completion data in the environment, it should
probably at least call _cache_invalid to check whether this data
and the data cached on disk is still valid.
See the _perl_modules completion function for a simple example
of usage of this caching layer.
_tags [ -C name [ tags ... ] ]
If called with arguments, these are taken as the names of the
tags for the types of matches the calling completion function
can generate in the current context. These tags are stored
internally and sorted by using the tag-order style. Following
calls to this function without arguments from the same function
will then select the first, second, etc. set of tags requested
by the user. To test if a certain tag should be tried, the
_requested function has to be called (see above).
The return value is zero if at least one of the tags is
requested and non-zero otherwise.
This function also accepts the -C option followed by a name.
This name is temporarily (i.e. not visible outside _tags) stored
in the argument field of the context name in the curcontext
parameter. This allows _tags to be made to use a more specific
context name without having to change and reset the curcontext
parameter (which would otherwise have the same effect).
_values specs ...
This is used to complete values (strings) and their arguments or
lists of such values. It can be used in two ways.
If the first argument is the option `-O name', this will be used
in the same way as by the _arguments function, in other words
the elements of the name array will be given to calls to compadd
and when executing an action.
Otherwise, if the first argument (or the first argument after
the `-O name' option if that is used) is the option `-s', the
next argument is used as the character that separates multiple
values. Thus the values completed appear in the same word on
the command line, unlike completion using _arguments.
The first argument (after the options and separator character if
they are given) is used as a string to print as a description
before listing the values.
All other arguments describe the possible values and their argu‐
ments in the same format used for the description of options by
the _arguments function (see above). The only differences are
that no minus or plus sign is required at the beginning, that
values can have only one argument and that those forms of
actions beginning with an equal sign are not supported.
The character separating a value from its argument can be set
using the option -S (like -s, followed by the character to use
as the separator in the next argument). If this option is not
used, the equal sign will be used as the separator.
Example:
_values -s , 'description' \
'*foo[bar]' \
'(two)*one[number]:first count:' \
'two[another number]::second count:(1 2 3)'
This describes three possible values: `foo', `one', and `two'.
The first is described as `bar', takes no argument and may
appear more than once. The second is described as `number', may
appear more than once, and takes one mandatory argument
described as `first count' for which no action is specified so
that it will not be completed automatically. The `(two)' at the
beginning says that if the value `one' is on the line, the value
`two' will not be considered to be a possible completion any‐
more. Finally, the last value (`two') is described as `another
number' and takes an optional argument described as `second
count' which will be completed from the strings `1', `2', and
`3'. The _values function will complete lists of these values
separated by commas.
Like _arguments this function temporarily adds another context
name component to the current context name while executing the
action. Here this name is just the name of the value for which
the argument is completed.
To decide if the descriptions for the values (not those for the
arguments) should be printed, the style verbose is used.
One last difference from _arguments is that this function uses
the associative array val_args to report values and their argu‐
ments, although otherwise this is the same as the opt_args asso‐
ciation used by _arguments. This also means that the function
calling _values should declare the state, line, context and
val_args parameters as in:
local context state line
typeset -A val_args
when using an action of the form `->string'. With this function
the context parameter will be set to the name of the value whose
argument is to be completed.
Note also that _values normally adds the character used as the
separator between values as a auto-removable suffix so that
users don't have to type it themselves. But when using a
`->string' action _values can't do that because the matches for
the argument will be generated by the calling function. To get
the usual behaviour, the implementor of the calling function has
to add the suffix directly by passing the options `-qS x' (where
x is the separator character specified with the -s option of
_values) to the function generating the matches or to the com‐
padd builtin.
Like _arguments, _values supports the -C option in which case
you have to make the parameter curcontext local instead of con‐
text (as described above).
_wanted [ -C name ] [ -12VJ ] tag name descr command args ...
In many contexts, completion will generate one particular set of
matches (usually corresponding to a single tag); however, it is
still necessary to decide whether the user requires matches of
this type. This function is useful in such a case.
Like _requested, it should be passed arguments as for _descrip‐
tion. It calls _tags with the given tag and if that returns
zero (so that the tag is requested by the user) it calls
_description. Hence to offer only one tag and immediately use
the description generated:
_wanted tag expl 'description' \
compadd matches...
Unlike _requested, however, _wanted cannot be called without the
command. This is because _wanted also implements the loop over
the tags, not just the one for the labels; conversely, it should
not be called in the middle of a _tags loop.
Note that, as for _requested, the command has to accept the
options that have to be passed down to compadd.
Like _tags this function supports the -C option to give a dif‐
ferent name for the argument context field.
COMPLETION DIRECTORIES
In the source distribution, the files are contained in various subdi‐
rectories of the Completion directory. They may have been installed in
the same structure, or into one single function directory. The follow‐
ing is a description of the files found in the original directory
structure. If you wish to alter an installed file, you will need to
copy it to some directory which appears earlier in your fpath than the
standard directory where it appears.
Base The core functions and special completion widgets automatically
bound to keys. You will certainly need most of these, though
will probably not need to alter them. Many of these are docu‐
mented above.
Zsh Functions for completing arguments of shell builtin commands and
utility functions for this. Some of these are also used by
functions from the Unix directory.
Unix Functions for completing arguments of external commands and
suites of commands. They may need modifying for your system,
although in many cases some attempt is made to decide which ver‐
sion of a command is present. For example, completion for the
mount command tries to determine the system it is running on,
while completion for many other utilities try to decide whether
the GNU version of the command is in use, and hence whether the
--help option is supported..
X, AIX, BSD, ...
Completion and utility function for commands available only on
some systems.
ZSHCOMPCTL(1)ZSHCOMPCTL(1)NAME
zshcompctl - zsh programmable completion
SYNOPSIS
This version of zsh has two ways of performing completion of words on
the command line. New users of the shell may prefer to use the newer
and more powerful system based on shell functions; this is described in
zshcompsys(1), and the basic shell mechanisms which support it are
described in zshcompwid(1). This manual entry describes the older com‐
pctl command.
DESCRIPTION
compctl [ -CDT ] options [ command ... ]
compctl [ -CDT ] options [ -x pattern options - ... -- ] [ + options [
-x ... -- ] ... [+] ] [ command ... ]
compctl -M match-specs ...
compctl -L [ -CDTM ] [ command ... ]
compctl + command ...
Control the editor's completion behavior according to the supplied set
of options. Various editing commands, notably expand-or-complete-word,
usually bound to tab, will attempt to complete a word typed by the
user, while others, notably delete-char-or-list, usually bound to ^D in
EMACS editing mode, list the possibilities; compctl controls what those
possibilities are. They may for example be filenames (the most common
case, and hence the default), shell variables, or words from a
user-specified list.
COMMAND FLAGS
Completion of the arguments of a command may be different for each com‐
mand or may use the default. The behavior when completing the command
word itself may also be separately specified. These correspond to the
following flags and arguments, all of which (except for -L) may be com‐
bined with any combination of the options described subsequently in the
section `Option Flags':
command ...
controls completion for the named commands, which must be listed
last on the command line. If completion is attempted for a com‐
mand with a pathname containing slashes and no completion defi‐
nition is found, the search is retried with the last pathname
component. If the command starts with a =, completion is tried
with the pathname of the command.
Any of the command strings may be patterns of the form normally
used for filename generation. These should be be quoted to pro‐
tect them from immediate expansion; for example the command
string 'foo*' arranges for completion of the words of any com‐
mand beginning with foo. When completion is attempted, all pat‐
tern completions are tried in the reverse order of their defini‐
tion until one matches. By default, completion then proceeds as
normal, i.e. the shell will try to generate more matches for the
specific command on the command line; this can be overridden by
including -tn in the flags for the pattern completion.
Note that aliases are expanded before the command name is deter‐
mined unless the COMPLETE_ALIASES option is set. Commands may
not be combined with the -C, -D or -T flags.
-C controls completion when the command word itself is being com‐
pleted. If no compctl -C command has been issued, the names of
any executable command (whether in the path or specific to the
shell, such as aliases or functions) are completed.
-D controls default completion behavior for the arguments of com‐
mands not assigned any special behavior. If no compctl -D com‐
mand has been issued, filenames are completed.
-T supplies completion flags to be used before any other processing
is done, even before processing for compctls defined for spe‐
cific commands. This is especially useful when combined with
extended completion (the -x flag, see the section `Extended Com‐
pletion' below). Using this flag you can define default behav‐
ior which will apply to all commands without exception, or you
can alter the standard behavior for all commands. For example,
if your access to the user database is too slow and/or it con‐
tains too many users (so that completion after `~' is too slow
to be usable), you can use
compctl -T -x 's[~] C[0,[^/]#]' -k friends -S/ -tn
to complete the strings in the array friends after a `~'. The
C[...] argument is necessary so that this form of ~-completion
is not tried after the directory name is finished.
-L lists the existing completion behavior in a manner suitable for
putting into a start-up script; the existing behavior is not
changed. Any combination of the above forms, or the -M flag
(which must follow the -L flag), may be specified, otherwise all
defined completions are listed. Any other flags supplied are
ignored.
no argument
If no argument is given, compctl lists all defined completions
in an abbreviated form; with a list of options, all completions
with those flags set (not counting extended completion) are
listed.
If the + flag is alone and followed immediately by the command list,
the completion behavior for all the commands in the list is reset to
the default. In other words, completion will subsequently use the
options specified by the -D flag.
The form with -M as the first and only option defines global matching
specifications (see zshcompwid). The match specifications given will be
used for every completion attempt (only when using compctl, not with
the new completion system) and are tried in the order in which they are
defined until one generates at least one match. E.g.:
compctl -M '' 'm:{a-zA-Z}={A-Za-z}'
This will first try completion without any global match specifications
(the empty string) and, if that generates no matches, will try case
insensitive completion.
OPTION FLAGS
[ -fcFBdeaRGovNAIOPZEnbjrzu/12 ]
[ -k array ] [ -g globstring ] [ -s subststring ]
[ -K function ]
[ -Q ] [ -P prefix ] [ -S suffix ]
[ -W file-prefix ] [ -H num pattern ]
[ -q ] [ -X explanation ] [ -Y explanation ]
[ -y func-or-var ] [ -l cmd ] [ -h cmd ] [ -U ]
[ -t continue ] [ -J name ] [ -V name ]
[ -M match-spec ]
The remaining options specify the type of command arguments to look for
during completion. Any combination of these flags may be specified;
the result is a sorted list of all the possibilities. The options are
as follows.
Simple Flags
These produce completion lists made up by the shell itself:
-f Filenames and filesystem paths.
-/ Just filesystem paths.
-c Command names, including aliases, shell functions, builtins and
reserved words.
-F Function names.
-B Names of builtin commands.
-m Names of external commands.
-w Reserved words.
-a Alias names.
-R Names of regular (non-global) aliases.
-G Names of global aliases.
-d This can be combined with -F, -B, -w, -a, -R and -G to get names
of disabled functions, builtins, reserved words or aliases.
-e This option (to show enabled commands) is in effect by default,
but may be combined with -d; -de in combination with -F, -B, -w,
-a, -R and -G will complete names of functions, builtins,
reserved words or aliases whether or not they are disabled.
-o Names of shell options (see zshoptions(1)).
-v Names of any variable defined in the shell.
-N Names of scalar (non-array) parameters.
-A Array names.
-I Names of integer variables.
-O Names of read-only variables.
-p Names of parameters used by the shell (including special parame‐
ters).
-Z Names of shell special parameters.
-E Names of environment variables.
-n Named directories.
-b Key binding names.
-j Job names: the first word of the job leader's command line.
This is useful with the kill builtin.
-r Names of running jobs.
-z Names of suspended jobs.
-u User names.
Flags with Arguments
These have user supplied arguments to determine how the list of comple‐
tions is to be made up:
-k array
Names taken from the elements of $array (note that the `$' does
not appear on the command line). Alternatively, the argument
array itself may be a set of space- or comma-separated values in
parentheses, in which any delimiter may be escaped with a back‐
slash; in this case the argument should be quoted. For example,
compctl -k "(cputime filesize datasize stacksize
coredumpsize resident descriptors)" limit
-g globstring
The globstring is expanded using filename globbing; it should be
quoted to protect it from immediate expansion. The resulting
filenames are taken as the possible completions. Use `*(/)'
instead of `*/' for directories. The fignore special parameter
is not applied to the resulting files. More than one pattern
may be given separated by blanks. (Note that brace expansion is
not part of globbing. Use the syntax `(either|or)' to match
alternatives.)
-s subststring
The subststring is split into words and these words are than
expanded using all shell expansion mechanisms (see zshexpn(1)).
The resulting words are taken as possible completions. The fig‐
nore special parameter is not applied to the resulting files.
Note that -g is faster for filenames.
-K function
Call the given function to get the completions. Unless the name
starts with an underscore, the function is passed two arguments:
the prefix and the suffix of the word on which completion is to
be attempted, in other words those characters before the cursor
position, and those from the cursor position onwards. The whole
command line can be accessed with the -c and -l flags of the
read builtin. The function should set the variable reply to an
array containing the completions (one completion per element);
note that reply should not be made local to the function. From
such a function the command line can be accessed with the -c and
-l flags to the read builtin. For example,
function whoson { reply=(`users`); }
compctl -K whoson talk
completes only logged-on users after `talk'. Note that `whoson'
must return an array, so `reply=`users`' would be incorrect.
-H num pattern
The possible completions are taken from the last num history
lines. Only words matching pattern are taken. If num is zero
or negative the whole history is searched and if pattern is the
empty string all words are taken (as with `*'). A typical use
is
compctl -D -f + -H 0 ''
which forces completion to look back in the history list for a
word if no filename matches.
Control Flags
These do not directly specify types of name to be completed, but manip‐
ulate the options that do:
-Q This instructs the shell not to quote any metacharacters in the
possible completions. Normally the results of a completion are
inserted into the command line with any metacharacters quoted so
that they are interpreted as normal characters. This is appro‐
priate for filenames and ordinary strings. However, for special
effects, such as inserting a backquoted expression from a com‐
pletion array (-k) so that the expression will not be evaluated
until the complete line is executed, this option must be used.
-P prefix
The prefix is inserted just before the completed string; any
initial part already typed will be completed and the whole pre‐
fix ignored for completion purposes. For example,
compctl -j -P "%" kill
inserts a `%' after the kill command and then completes job
names.
-S suffix
When a completion is found the suffix is inserted after the com‐
pleted string. In the case of menu completion the suffix is
inserted immediately, but it is still possible to cycle through
the list of completions by repeatedly hitting the same key.
-W file-prefix
With directory file-prefix: for command, file, directory and
globbing completion (options -c, -f, -/, -g), the file prefix is
implicitly added in front of the completion. For example,
compctl -/ -W ~/Mail maildirs
completes any subdirectories to any depth beneath the directory
~/Mail, although that prefix does not appear on the command
line. The file-prefix may also be of the form accepted by the
-k flag, i.e. the name of an array or a literal list in paren‐
thesis. In this case all the directories in the list will be
searched for possible completions.
-q If used with a suffix as specified by the -S option, this causes
the suffix to be removed if the next character typed is a blank
or does not insert anything or if the suffix consists of only
one character and the next character typed is the same charac‐
ter; this the same rule used for the AUTO_REMOVE_SLASH option.
The option is most useful for list separators (comma, colon,
etc.).
-l cmd This option restricts the range of command line words that are
considered to be arguments. If combined with one of the
extended completion patterns `p[...]', `r[...]', or `R[...]'
(see the section `Extended Completion' below) the range is
restricted to the range of arguments specified in the brackets.
Completion is then performed as if these had been given as argu‐
ments to the cmd supplied with the option. If the cmd string is
empty the first word in the range is instead taken as the com‐
mand name, and command name completion performed on the first
word in the range. For example,
compctl -x 'r[-exec,;]' -l '' -- find
completes arguments between `-exec' and the following `;' (or
the end of the command line if there is no such string) as if
they were a separate command line.
-h cmd Normally zsh completes quoted strings as a whole. With this
option, completion can be done separately on different parts of
such strings. It works like the -l option but makes the comple‐
tion code work on the parts of the current word that are sepa‐
rated by spaces. These parts are completed as if they were argu‐
ments to the given cmd. If cmd is the empty string, the first
part is completed as a command name, as with -l.
-U Use the whole list of possible completions, whether or not they
actually match the word on the command line. The word typed so
far will be deleted. This is most useful with a function (given
by the -K option) which can examine the word components passed
to it (or via the read builtin's -c and -l flags) and use its
own criteria to decide what matches. If there is no completion,
the original word is retained. Since the produced possible com‐
pletions seldom have interesting common prefixes and suffixes,
menu completion is started immediately if AUTO_MENU is set and
this flag is used.
-y func-or-var
The list provided by func-or-var is displayed instead of the
list of completions whenever a listing is required; the actual
completions to be inserted are not affected. It can be provided
in two ways. Firstly, if func-or-var begins with a $ it defines
a variable, or if it begins with a left parenthesis a literal
array, which contains the list. A variable may have been set by
a call to a function using the -K option. Otherwise it contains
the name of a function which will be executed to create the
list. The function will be passed as an argument list all
matching completions, including prefixes and suffixes expanded
in full, and should set the array reply to the result. In both
cases, the display list will only be retrieved after a complete
list of matches has been created.
Note that the returned list does not have to correspond, even in
length, to the original set of matches, and may be passed as a
scalar instead of an array. No special formatting of characters
is performed on the output in this case; in particular, newlines
are printed literally and if they appear output in columns is
suppressed.
-X explanation
Print explanation when trying completion on the current set of
options. A `%n' in this string is replaced by the number of
matches that were added for this explanation string. The expla‐
nation only appears if completion was tried and there was no
unique match, or when listing completions. Explanation strings
will be listed together with the matches of the group specified
together with the -X option (using the -J or -V option). If the
same explanation string is given to multiple -X options, the
string appears only once (for each group) and the number of
matches shown for the `%n' is the total number of all matches
for each of these uses. In any case, the explanation string will
only be shown if there was at least one match added for the
explanation string.
The sequences %B, %b, %S, %s, %U, and %u specify output
attributes (bold, standout, and underline) and %{...%} can be
used to include literal escape sequences as in prompts.
-Y explanation
Identical to -X, except that the explanation first undergoes
expansion following the usual rules for strings in double
quotes. The expansion will be carried out after any functions
are called for the -K or -y options, allowing them to set vari‐
ables.
-t continue
The continue-string contains a character that specifies which
set of completion flags should be used next. It is useful:
(i) With -T, or when trying a list of pattern completions, when
compctl would usually continue with ordinary processing after
finding matches; this can be suppressed with `-tn'.
(ii) With a list of alternatives separated by +, when compctl
would normally stop when one of the alternatives generates
matches. It can be forced to consider the next set of comple‐
tions by adding `-t+' to the flags of the alternative before the
`+'.
(iii) In an extended completion list (see below), when compctl
would normally continue until a set of conditions succeeded,
then use only the immediately following flags. With `-t-', com‐
pctl will continue trying extended completions after the next
`-'; with `-tx' it will attempt completion with the default
flags, in other words those before the `-x'.
-J name
This gives the name of the group the matches should be placed
in. Groups are listed and sorted separately; likewise, menu com‐
pletion will offer the matches in the groups in the order in
which the groups were defined. If no group name is explicitly
given, the matches are stored in a group named default. The
first time a group name is encountered, a group with that name
is created. After that all matches with the same group name are
stored in that group.
This can be useful with non-exclusive alternative completions.
For example, in
compctl -f -J files -t+ + -v -J variables foo
both files and variables are possible completions, as the -t+
forces both sets of alternatives before and after the + to be
considered at once. Because of the -J options, however, all
files are listed before all variables.
-V name
Like -J, but matches within the group will not be sorted in
listings nor in menu completion. These unsorted groups are in a
different name space from the sorted ones, so groups defined as
-J files and -V files are distinct.
-1 If given together with the -V option, makes only consecutive
duplicates in the group be removed. Note that groups with and
without this flag are in different name spaces.
-2 If given together with the -J or -V option, makes all duplicates
be kept. Again, groups with and without this flag are in differ‐
ent name spaces.
-M match-spec
This defines additional matching control specifications that
should be used only when testing words for the list of flags
this flag appears in. The format of the match-spec string is
described in zshcompwid.
ALTERNATIVE COMPLETION
compctl [ -CDT ] options + options [ + ... ] [ + ] command ...
The form with `+' specifies alternative options. Completion is tried
with the options before the first `+'. If this produces no matches com‐
pletion is tried with the flags after the `+' and so on. If there are
no flags after the last `+' and a match has not been found up to that
point, default completion is tried. If the list of flags contains a -t
with a + character, the next list of flags is used even if the current
list produced matches.
EXTENDED COMPLETION
compctl [ -CDT ] options -x pattern options - ... --
[ command ... ]
compctl [ -CDT ] options [ -x pattern options - ... -- ]
[ + options [ -x ... -- ] ... [+] ] [ command ... ]
The form with `-x' specifies extended completion for the commands
given; as shown, it may be combined with alternative completion using
`+'. Each pattern is examined in turn; when a match is found, the cor‐
responding options, as described in the section `Option Flags' above,
are used to generate possible completions. If no pattern matches, the
options given before the -x are used.
Note that each pattern should be supplied as a single argument and
should be quoted to prevent expansion of metacharacters by the shell.
A pattern is built of sub-patterns separated by commas; it matches if
at least one of these sub-patterns matches (they are `or'ed). These
sub-patterns are in turn composed of other sub-patterns separated by
white spaces which match if all of the sub-patterns match (they are
`and'ed). An element of the sub-patterns is of the form `c[...][...]',
where the pairs of brackets may be repeated as often as necessary, and
matches if any of the sets of brackets match (an `or'). The example
below makes this clearer.
The elements may be any of the following:
s[string]...
Matches if the current word on the command line starts with one
of the strings given in brackets. The string is not removed and
is not part of the completion.
S[string]...
Like s[string] except that the string is part of the completion.
p[from,to]...
Matches if the number of the current word is between one of the
from and to pairs inclusive. The comma and to are optional; to
defaults to the same value as from. The numbers may be nega‐
tive: -n refers to the n'th last word on the line.
c[offset,string]...
Matches if the string matches the word offset by offset from the
current word position. Usually offset will be negative.
C[offset,pattern]...
Like c but using pattern matching instead.
w[index,string]...
Matches if the word in position index is equal to the corre‐
sponding string. Note that the word count is made after any
alias expansion.
W[index,pattern]...
Like w but using pattern matching instead.
n[index,string]...
Matches if the current word contains string. Anything up to and
including the indexth occurrence of this string will not be con‐
sidered part of the completion, but the rest will. index may be
negative to count from the end: in most cases, index will be 1
or -1. For example,
compctl -s '`users`' -x 'n[1,@]' -k hosts -- talk
will usually complete usernames, but if you insert an @ after
the name, names from the array hosts (assumed to contain host‐
names, though you must make the array yourself) will be com‐
pleted. Other commands such as rcp can be handled similarly.
N[index,string]...
Like n except that the string will be taken as a character
class. Anything up to and including the indexth occurrence of
any of the characters in string will not be considered part of
the completion.
m[min,max]...
Matches if the total number of words lies between min and max
inclusive.
r[str1,str2]...
Matches if the cursor is after a word with prefix str1. If
there is also a word with prefix str2 on the command line after
the one matched by str1 it matches only if the cursor is before
this word. If the comma and str2 are omitted, it matches if the
cursor is after a word with prefix str1.
R[str1,str2]...
Like r but using pattern matching instead.
q[str]...
Matches the word currently being completed is in single quotes
and the str begins with the letter `s', or if completion is done
in double quotes and str starts with the letter `d', or if com‐
pletion is done in backticks and str starts with a `b'.
EXAMPLE
compctl -u -x 's[+] c[-1,-f],s[-f+]' \
-g '~/Mail/*(:t)' - 's[-f],c[-1,-f]' -f -- mail
This is to be interpreted as follows:
If the current command is mail, then
if ((the current word begins with + and the previous word is -f)
or (the current word begins with -f+)), then complete the
non-directory part (the `:t' glob modifier) of files in the directory
~/Mail; else
if the current word begins with -f or the previous word was -f, then
complete any file; else
complete user names.
ZSHMODULES(1)ZSHMODULES(1)NAME
zshmodules - zsh loadable modules
DESCRIPTION
Some optional parts of zsh are in modules, separate from the core of
the shell. Each of these modules may be linked in to the shell at
build time, or can be dynamically linked while the shell is running if
the installation supports this feature. The modules that are bundled
with the zsh distribution are:
zsh/cap
Builtins for manipulating POSIX.1e (POSIX.6) capability (privi‐
lege) sets.
zsh/clone
A builtin that can clone a running shell onto another terminal.
zsh/compctl
The compctl builtin for controlling completion.
zsh/complete
The basic completion code.
zsh/complist
Completion listing extensions.
zsh/computil
A module with utility builtins needed for the shell function
based completion system.
zsh/deltochar
A ZLE function duplicating EMACS' zap-to-char.
zsh/example
An example of how to write a module.
zsh/files
Some basic file manipulation commands as builtins.
zsh/mapfile
Access to external files via a special associative array.
zsh/mathfunc
Standard scientific functions for use in mathematical evalua‐
tions.
zsh/parameter
Access to internal hash tables via special associative arrays.
zsh/sched
A builtin that provides a timed execution facility within the
shell.
zsh/stat
A builtin command interface to the stat system call.
zsh/termcap
Interface to the termcap database.
zsh/terminfo
Interface to the terminfo database.
zsh/zftp
A builtin FTP client.
zsh/zle
The Zsh Line Editor, including the bindkey and vared builtins.
zsh/zleparameter
Access to internals of the Zsh Line Editor via parameters.
zsh/zprof
A module allowing profiling for shell functions.
zsh/zpty
A builtin for starting a command in a pseudo-terminal.
zsh/zutil
Some utility builtins, e.g. the one for supporting configuration
via styles.
THE ZSH/CAP MODULE
The zsh/cap module is used for manipulating POSIX.1e (POSIX.6) capabil‐
ity sets. If the operating system does not support this interface, the
builtins defined by this module will do nothing. The builtins in this
module are:
cap [ capabilities ]
Change the shell's process capability sets to the specified
capabilities, otherwise display the shell's current capabili‐
ties.
getcap filename ...
This is a built-in implementation of the POSIX standard utility.
It displays the capability sets on each specified filename.
setcap capabilities filename ...
This is a built-in implementation of the POSIX standard utility.
It sets the capability sets on each specified filename to the
specified capabilities.
THE ZSH/CLONE MODULE
The zsh/clone module makes available one builtin command:
clone tty
Creates a forked instance of the current shell, attached to the
specified tty. In the new shell, the PID, PPID and TTY special
parameters are changed appropriately. $! is set to zero in the
new shell, and to the new shell's PID in the original shell.
The return value of the builtin is zero in both shells if suc‐
cessful, and non-zero on error.
THE ZSH/COMPCTL MODULE
The zsh/compctl module makes available two builtin commands. compctl,
is the old, deprecated way to control completions for ZLE. See zshcom‐
pctl(1). The other builtin command, compcall can be used in
user-defined completion widgets, see zshcompwid(1).
THE ZSH/COMPLETE MODULE
The zsh/complete module makes available several builtin commands which
can be used in user-defined completion widgets, see zshcompwid(1).
THE ZSH/COMPLIST MODULE
The zsh/complist module offers three extensions to completion listings:
the ability to highlight matches in such a list, the ability to scroll
through long lists and a different style of menu completion.
Colored completion listings
Whenever one of the parameters ZLS_COLORS or ZLS_COLOURS is set and the
zsh/complist module is loaded or linked into the shell, completion
lists will be colored. Note, however, that complist will not automati‐
cally be loaded if it is not linked in: on systems with dynamic load‐
ing, `zmodload zsh/complist' is required.
The parameters ZLS_COLORS and ZLS_COLOURS describe how matches are
highlighted. To turn on highlighting an empty value suffices, in which
case all the default values given below will be used. The format of
the value of these parameters is the same as used by the GNU version of
the ls command: a colon-separated list of specifications of the form
`name=value'. The name may be one of the following strings, most of
which specify file types for which the value will be used. The strings
and their default values are:
no 0 for normal text (i.e. when displaying something other than a
matched file)
fi 0 for regular files
di 32 for directories
ln 36 for symbolic links
pi 31 for named pipes (FIFOs)
so 33 for sockets
bd 44;37
for block devices
cd 44;37
for character devices
ex 35 for executable files
mi none
for a non-existent file (default is the value defined for fi)
lc \e[ for the left code (see below)
rc m for the right code
tc 0 for the character indicating the file type printed after file‐
names if the LIST_TYPES option is set
sp 0 for the spaces printed after matches to align the next column
ec none
for the end code
Apart from these strings, the name may also be an asterisk (`*') fol‐
lowed by any string. The value given for such a string will be used for
all files whose name ends with the string. The name may also be an
equals sign (`=') followed by a pattern. The value given for this pat‐
tern will be used for all matches (not just filenames) whose display
string are matched by the pattern. Definitions for both of these take
precedence over the values defined for file types and the form with the
leading asterisk takes precedence over the form with the leading equal
sign.
The last form also allows different parts of the displayed strings to
be colored differently. For this, the pattern has to use the `(#b)'
globbing flag and pairs of parentheses surrounding the parts of the
strings that are to be colored differently. In this case the value may
consist of more than one color code separated by equal signs. The
first code will be used for all parts for which no explicit code is
specified and the following codes will be used for the parts matched by
the sub-patterns in parentheses. For example, the specification
`=(#b)(?)*(?)=0=3=7' will be used for all matches which are at least
two characters long and will use the code `3' for the first character,
`7' for the last character and `0' for the rest.
All three forms of name may be preceded by a pattern in parentheses.
If this is given, the value will be used only for matches in groups
whose names are matched by the pattern given in the parentheses. For
example, `(g*)m*=43' highlights all matches beginning with `m' in
groups whose names begin with `g' using the color code `43'. In case
of the `lc', `rc', and `ec' codes, the group pattern is ignored.
Note also that all patterns are tried in the order in which they appear
in the parameter value until the first one matches which is then used.
When printing a match, the code prints the value of lc, the value for
the file-type or the last matching specification with a `*', the value
of rc, the string to display for the match itself, and then the value
of ec if that is defined or the values of lc, no, and rc if ec is not
defined.
The default values are ISO 6429 (ANSI) compliant and can be used on
vt100 compatible terminals such as xterms. On monochrome terminals the
default values will have no visible effect. The colors function from
the contribution can be used to get associative arrays containing the
codes for ANSI terminals (see the section `Other Functions' in zshcon‐
trib(1)). For example, after loading colors, one could use `$col‐
ors[red]' to get the code for foreground color red and `$col‐
ors[bg-green]' for the code for background color green.
If the completion system invoked by compinit is used, these parameters
should not be set directly because the system controls them itself.
Instead, the list-colors style should be used (see the section `Comple‐
tion System Configuration' in zshcompsys(1)).
Scrolling in completion listings
To enable scrolling through a completion list, the LISTPROMPT parameter
must be set. Its value will be used as the prompt; if it is the empty
string, a default prompt will be used. The value may contain escapes
of the form `%x'. It supports the escapes `%B', `%b', `%S', `%s',
`%U', `%u' and `%{...%}' used also in shell prompts as well as three
pairs of additional sequences: a `%l' or `%L' is replaced by the number
of the last line shown and the total number of lines in the form `num‐
ber/total'; a `%m' or `%M' is replaced with the number of the last
match shown and the total number of matches; and `%p' or `%P' is
replaced with `Top', `Bottom' or the position of the first line shown
in percent of the total number of lines, respectively. In each of
these cases the form with the uppercase letter will be replaced with a
string of fixed width, padded to the right with spaces, while the low‐
ercase form will not be padded.
If the parameter LISTPROMPT is set, the completion code will not ask if
the list should be shown. Instead it immediately starts displaying the
list, stopping after the first screenful, showing the prompt at the
bottom, waiting for a keypress after temporarily switching to the
listscroll keymap. Some of the zle functions have a special meaning
while scrolling lists:
send-break
stops listing discarding the key pressed
accept-line, down-history, down-line-or-history
down-line-or-search, vi-down-line-or-history
scrolls forward one line
complete-word, menu-complete, expand-or-complete
expand-or-complete-prefix, menu-complete-or-expand
scrolls forward one screenful
Every other character stops listing and immediately processes the key
as usual. Any key that is not bound in the listscroll keymap or that
is bound to undefined-key is looked up in the keymap currently
selected.
As for the ZLS_COLORS and ZLS_COLOURS parameters, LISTPROMPT should not
be set directly when using the shell function based completion system.
Instead, the list-prompt style should be used.
Menu selection
The zsh/complist module also offers an alternative style of selecting
matches from a list, called menu selection, which can be used if the
shell is set up to return to the last prompt after showing a completion
list (see the ALWAYS_LAST_PROMPT option in zshoptions(1)). It can be
invoked directly by the widget menu-select defined by the module.
Alternatively, the parameter MENUSELECT can be set to an integer, which
gives the minimum number of matches that must be present before menu
selection is automatically turned on. This second method requires that
menu completion be started, either directly from a widget such as
menu-complete, or due to one of the options MENU_COMPLETE or AUTO_MENU
being set. If MENUSELECT is set, but is 0, 1 or empty, menu selection
will always be started during an ambiguous menu completion.
When using the completion system based on shell functions, the MENUSE‐
LECT parameter should not be used (like the ZLS_COLORS and ZLS_COLOURS
parameters described above). Instead, the menu style should be used
with the select=... keyword.
After menu selection is started, the matches will be listed. If there
are more matches than fit on the screen, only the first screenful is
shown. The matches to insert into the command line can be selected
from this list. In the list one match is highlighted using the value
for ma from the ZLS_COLORS or ZLS_COLOURS parameter. The default value
for this is `7' which forces the selected match to be highlighted using
standout mode on a vt100-compatible terminal. If neither ZLS_COLORS
nor ZLS_COLOURS is set, the same terminal control sequence as for the
`%S' escape in prompts is used.
If there are more matches than fit on the screen and the parameter
MENUPROMPT is set, its value will be shown below the matches. It sup‐
ports the same escape sequences as LISTPROMPT, but the number of the
match or line shown will be that of the one where the mark is placed.
If its value is the empty string, a default prompt will be used.
The MENUSCROLL parameter can be used to specify how the list is
scrolled. If the parameter is unset, this is done line by line, if it
is set to `0' (zero), the list will scroll half the number of lines of
the screen. If the value is positive, it gives the number of lines to
scroll and if it is negative, the list will be scrolled the number of
lines of the screen minus the (absolute) value.
As for the ZLS_COLORS, ZLS_COLOURS and LISTPROMPT parameters, neither
MENUPROMPT nor MENUSCROLL should be set directly when using the shell
function based completion system. Instead, the select-prompt and
select-scroll styles should be used.
The completion code sometimes decides not to show all of the matches in
the list. These hidden matches are either matches for which the com‐
pletion function which added them explicitly requested that they not
appear in the list (using the -n option of the compadd builtin command)
or they are matches which duplicate a string already in the list
(because they differ only in things like prefixes or suffixes that are
not displayed). In the list used for menu selection, however, even
these matches are shown so that it is possible to select them. To
highlight such matches the hi and du capabilities in the ZLS_COLORS and
ZLS_COLOURS parameters are supported for hidden matches of the first
and second kind, respectively.
Selecting matches is done by moving the mark around using the zle move‐
ment functions. When not all matches can be shown on the screen at the
same time, the list will scroll up and down when crossing the top or
bottom line. The following zle functions have special meaning during
menu selection:
accept-line
accepts the current match and leaves menu selection
send-break
leaves menu selection and restores the previous contents of the
command line
redisplay, clear-screen
execute their normal function without leaving menu selection
accept-and-hold, accept-and-menu-complete
accept the currently inserted match and continue selection
allowing to select the next match to insert into the line
accept-and-infer-next-history
accepts the current match and then tries completion with menu
selection again; in the case of files this allows one to select
a directory and immediately attempt to complete files in it; if
there are no matches, a message is shown and one can use undo to
go back to completion on the previous level, every other key
leaves menu selection (including the other zle functions which
are otherwise special during menu selection)
undo removes matches inserted during the menu selection by one of the
three functions before
down-history, down-line-or-history
vi-down-line-or-history, down-line-or-search
moves the mark one line down
up-history, up-line-or-history
vi-up-line-or-history, up-line-or-search
moves the mark one line up
forward-char, vi-forward-char
moves the mark one column right
backward-char, vi-backward-char
moves the mark one column left
forward-word, vi-forward-word
vi-forward-word-end, emacs-forward-word
moves the mark one screenful down
backward-word, vi-backward-word, emacs-backward-word
moves the mark one screenful up
vi-forward-blank-word, vi-forward-blank-word-end
moves the mark to the first line of the next group of matches
vi-backward-blank-word
moves the mark to the last line of the previous group of matches
beginning-of-history
moves the mark to the first line
end-of-history
moves the mark to the last line
beginning-of-buffer-or-history, beginning-of-line
beginning-of-line-hist, vi-beginning-of-line
moves the mark to the leftmost column
end-of-buffer-or-history, end-of-line
end-of-line-hist, vi-end-of-line
moves the mark to the rightmost column
complete-word, menu-complete, expand-or-complete
expand-or-complete-prefix, menu-expand-or-complete
moves the mark to the next match
reverse-menu-complete
moves the mark to the previous match
All movement functions wrap around at the edges; any other zle function
not listed leaves menu selection and executes that function. It is
possible to make widgets in the above list do the same by using the
form of the widget with a `.' in front. For example, the widget
`.accept-line' has the effect of leaving menu selection and accepting
the entire command line.
During this selection the widget uses the keymap menuselect. Any key
that is not defined in this keymap or that is bound to undefined-key is
looked up in the keymap currently selected. This is used to ensure
that the most important keys used during selection (namely the cursor
keys, return, and TAB) have sensible defaults. However, keys in the
menuselect keymap can be modified directly using the bindkey builtin
command (see zshmodules(1)). For example, to make the return key leave
menu selection without accepting the match currently selected one could
call
bindkey -M menuselect '^M' send-break
after loading the zsh/complist module.
THE ZSH/COMPUTIL MODULE
The zsh/computil module adds several builtin commands that are used by
some of the completion functions in the completion system based on
shell functions (see zshcompsys(1) ). Except for compquote these
builtin commands are very specialised and thus not very interesting
when writing your own completion functions. In summary, these builtin
commands are:
comparguments
This is used by the _arguments function to do the argument and
command line parsing. Like compdescribe it has an option -i to
do the parsing and initialize some internal state and various
options to access the state information to decide what should be
completed.
compdescribe
This is used by the _describe function to build the displays for
the matches and to get the strings to add as matches with their
options. On the first call one of the options -i or -I should
be supplied as the first argument. In the first case, display
strings without the descriptions will be generated, in the sec‐
ond case, the string used to separate the matches from their
descriptions must be given as the second argument and the
descriptions (if any) will be shown. All other arguments are
like the definition arguments to _describe itself.
Once compdescribe has been called with either the -i or the -I
option, it can be repeatedly called with the -g option and the
names of five arrays as its arguments. This will step through
the different sets of matches and store the options in the first
array, the strings with descriptions in the second, the matches
for these in the third, the strings without descriptions in the
fourth, and the matches for them in the fifth array. These are
then directly given to compadd to register the matches with the
completion code.
compfiles
Used by the _path_files function to optimize complex recursive
filename generation (globbing). It does three things. With the
-p and -P options it builds the glob patterns to use, including
the paths already handled and trying to optimize the patterns
with respect to the prefix and suffix from the line and the
match specification currently used. The -i option does the
directory tests for the ignore-parents style and the -r option
tests if a component for some of the matches are equal to the
string on the line and removes all other matches if that is
true.
compgroups
Used by the _tags function to implement the internals of the
group-order style. This only takes its arguments as names of
completion groups and creates the groups for it (all six types:
sorted and unsorted, both without removing duplicates, with
removing all duplicates and with removing consecutive dupli‐
cates).
compquote [ -p ] names ...
There may be reasons to write completion functions that have to
add the matches using the -Q option to compadd and perform quot‐
ing themselves. Instead of interpreting the first character of
the all_quotes key of the compstate special association and
using the q flag for parameter expansions, one can use this
builtin command. The arguments are the names of scalar or array
parameters and the values of these parameters are quoted as
needed for the innermost quoting level. If the -p option is
given, quoting is done as if there is some prefix before the
values of the parameters, so that a leading equal sign will not
be quoted.
The return value is non-zero in case of an error and zero other‐
wise.
comptags
comptry
These implement the internals of the tags mechanism.
compvalues
Like comparguments, but for the _values function.
THE ZSH/DELTOCHAR MODULE
The zsh/deltochar module makes available two ZLE functions:
delete-to-char
Read a character from the keyboard, and delete from the cursor
position up to and including the next (or, with repeat count n,
the nth) instance of that character. Negative repeat counts
mean delete backwards.
zap-to-char
This behaves like delete-to-char, except that the final occur‐
rence of the character itself is not deleted.
THE ZSH/EXAMPLE MODULE
The zsh/example module makes available one builtin command:
example [ -flags ] [ args ... ]
Displays the flags and arguments it is invoked with.
The purpose of the module is to serve as an example of how to write a
module.
THE ZSH/FILES MODULE
The zsh/files module makes some standard commands available as
builtins:
chgrp [ -Rs ] group filename ...
Changes group of files specified. This is equivalent to chown
with a user-spec argument of `:group'.
chown [ -Rs ] user-spec filename ...
Changes ownership and group of files specified.
The user-spec can be in four forms:
user change owner to user; do not change group
user:: change owner to user; do not change group
user: change owner to user; change group to user's primary
group
user:group
change owner to user; change group to group
:group do not change owner; change group to group
In each case, the `:' may instead be a `.'. The rule is that if
there is a `:' then the separator is `:', otherwise if there is
a `.' then the separator is `.', otherwise there is no separa‐
tor.
Each of user and group may be either a username (or group name,
as appropriate) or a decimal user ID (group ID). Interpretation
as a name takes precedence, if there is an all-numeric username
(or group name).
The -R option causes chown to recursively descend into directo‐
ries, changing the ownership of all files in the directory after
changing the ownership of the directory itself.
The -s option is a zsh extension to chown functionality. It
enables paranoid behaviour, intended to avoid security problems
involving a chown being tricked into affecting files other than
the ones intended. It will refuse to follow symbolic links, so
that (for example) ``chown luser /tmp/foo/passwd'' can't acci‐
dentally chown /etc/passwd if /tmp/foo happens to be a link to
/etc. It will also check where it is after leaving directories,
so that a recursive chown of a deep directory tree can't end up
recursively chowning /usr as a result of directories being moved
up the tree.
ln [ -dfis ] filename dest
ln [ -dfis ] filename ... dir
Creates hard (or, with -s, symbolic) links. In the first form,
the specified destination is created, as a link to the specified
filename. In the second form, each of the filenames is taken in
turn, and linked to a pathname in the specified directory that
has the same last pathname component.
Normally, ln will not attempt to create hard links to directo‐
ries. This check can be overridden using the -d option. Typi‐
cally only the super-user can actually succeed in creating hard
links to directories. This does not apply to symbolic links in
any case.
By default, existing files cannot be replaced by links. The -i
option causes the user to be queried about replacing existing
files. The -f option causes existing files to be silently
deleted, without querying. -f takes precedence.
mkdir [ -p ] [ -m mode ] dir ...
Creates directories. With the -p option, non-existing parent
directories are first created if necessary, and there will be no
complaint if the directory already exists. The -m option can be
used to specify (in octal) a set of file permissions for the
created directories, otherwise mode 777 modified by the current
umask (see umask(2)) is used.
mv [ -fi ] filename dest
mv [ -fi ] filename ... dir
Moves files. In the first form, the specified filename is moved
to the specified destination. In the second form, each of the
filenames is taken in turn, and moved to a pathname in the spec‐
ified directory that has the same last pathname component.
By default, the user will be queried before replacing any file
that the user cannot write to, but writable files will be
silently removed. The -i option causes the user to be queried
about replacing any existing files. The -f option causes any
existing files to be silently deleted, without querying. -f
takes precedence.
Note that this mv will not move files across devices. Histori‐
cal versions of mv, when actual renaming is impossible, fall
back on copying and removing files; if this behaviour is
desired, use cp and rm manually. This may change in a future
version.
rm [ -dfirs ] filename ...
Removes files and directories specified.
Normally, rm will not remove directories (except with the -r
option). The -d option causes rm to try removing directories
with unlink (see unlink(2)), the same method used for files.
Typically only the super-user can actually succeed in unlinking
directories in this way. -d takes precedence over -r.
By default, the user will be queried before removing any file
that the user cannot write to, but writable files will be
silently removed. The -i option causes the user to be queried
about removing any files. The -f option causes files to be
silently deleted, without querying, and suppresses all error
indications. -f takes precedence.
The -r option causes rm to recursively descend into directories,
deleting all files in the directory before removing the direc‐
tory with the rmdir system call (see rmdir(2)).
The -s option is a zsh extension to rm functionality. It
enables paranoid behaviour, intended to avoid common security
problems involving a root-run rm being tricked into removing
files other than the ones intended. It will refuse to follow
symbolic links, so that (for example) ``rm /tmp/foo/passwd''
can't accidentally remove /etc/passwd if /tmp/foo happens to be
a link to /etc. It will also check where it is after leaving
directories, so that a recursive removal of a deep directory
tree can't end up recursively removing /usr as a result of
directories being moved up the tree.
rmdir dir ...
Removes empty directories specified.
sync Calls the system call of the same name (see sync(2)), which
flushes dirty buffers to disk. It might return before the I/O
has actually been completed.
THE ZSH/MAPFILE MODULE
The zsh/mapfile module provides one special associative array parameter
of the same name.
mapfile
This associative array takes as keys the names of files; the
resulting value is the content of the file. The value is
treated identically to any other text coming from a parameter.
The value may also be assigned to, in which case the file in
question is written (whether or not it originally existed); or
an element may be unset, which will delete the file in question.
For example, `vared mapfile[myfile]' works as expected, editing
the file `myfile'.
When the array is accessed as a whole, the keys are the names of
files in the current directory, and the values are empty (to
save a huge overhead in memory). Thus ${(k)mapfile} has the
same affect as the glob operator *(D), since files beginning
with a dot are not special. Care must be taken with expressions
such as rm ${(k)mapfile}, which will delete every file in the
current directory without the usual `rm *' test.
The parameter mapfile may be made read-only; in that case, files
referenced may not be written or deleted.
Limitations
Although reading and writing of the file in question is efficiently
handled, zsh's internal memory management may be arbitrarily baroque.
Thus it should not automatically be assumed that use of mapfile repre‐
sents a gain in efficiency over use of other mechanisms. Note in par‐
ticular that the whole contents of the file will always reside physi‐
cally in memory when accessed (possibly multiple times, due to standard
parameter substitution operations). In particular, this means handling
of sufficiently long files (greater than the machine's swap space, or
than the range of the pointer type) will be incorrect.
No errors are printed or flagged for non-existent, unreadable, or
unwritable files, as the parameter mechanism is too low in the shell
execution hierarchy to make this convenient.
It is unfortunate that the mechanism for loading modules does not yet
allow the user to specify the name of the shell parameter to be given
the special behaviour.
THE ZSH/MATHFUNC MODULE
The zsh/mathfunc module provides standard mathematical functions for
use when evaluating mathematical formulae. The syntax agrees with nor‐
mal C and FORTRAN conventions, for example,
(( f = sin(0.3) ))
assigns the sine of 0.3 to the parameter f.
Most functions take floating point arguments and return a floating
point value. However, any necessary conversions from or to integer
type will be performed automatically by the shell. Apart from atan
with a second argument and the abs, int and float functions, all func‐
tions behave as noted in the manual page for the corresponding C func‐
tion, except that any arguments out of range for the function in ques‐
tion will be detected by the shell and an error reported.
The following functions take a single floating point argument: acos,
acosh, asin, asinh, atan, atanh, cbrt, ceil, cos, cosh, erf, erfc, exp,
expm1, fabs, floor, gamma, j0, j1, lgamma, log, log10, log1p, logb,
sin, sinh, sqrt, tan, tanh, y0, y1. The atan function can optionally
take a second argument, in which case it behaves like the C function
atan2. The ilogb function takes a single floating point argument, but
returns an integer.
The function signgam takes no arguments, and returns an integer, which
is the C variable of the same name, as described in gamma(3). Note
that it is therefore only useful immediately after a call to gamma or
lgamma. Note also that `signgam()' and `signgam' are distinct expres‐
sions.
The following functions take two floating point arguments: copysign,
fmod, hypot, nextafter.
The following take an integer first argument and a floating point sec‐
ond argument: jn, yn.
The following take a floating point first argument and an integer sec‐
ond argument: ldexp, scalb.
The function abs does not convert the type of its single argument; it
returns the absolute value of either a floating point number or an
integer. The functions float and int convert their arguments into a
floating point or integer value (by truncation) respectively.
Note that the C pow function is available in ordinary math evaluation
as the `**' operator and is not provided here.
THE ZSH/PARAMETER MODULE
The zsh/parameter module gives access to some of the internal hash
tables used by the shell by defining some special parameters.
options
The keys for this associative array are the names of the options
that can be set and unset using the setopt and unsetopt
builtins. The value of each key is either the string on if the
option is currently set, or the string off if the option is
unset. Setting a key to one of these strings is like setting or
unsetting the option, respectively. Unsetting a key in this
array is like setting it to the value off.
commands
This array gives access to the command hash table. The keys are
the names of external commands, the values are the pathnames of
the files that would be executed when the command would be
invoked. Setting a key in this array defines a new entry in this
table in the same way as with the hash builtin. Unsetting a key
as in `unset "commands[foo]"' removes the entry for the given
key from the command hash table.
functions
This associative array maps names of enabled functions to their
definitions. Setting a key in it is like defining a function
with the name given by the key and the body given by the value.
Unsetting a key removes the definition for the function named by
the key.
dis_functions
Like functions but for disabled functions.
builtins
This associative array gives information about the builtin com‐
mands currently enabled. The keys are the names of the builtin
commands and the values are either `undefined' for builtin com‐
mands that will automatically be loaded from a module if invoked
or `defined' for builtin commands that are already loaded.
dis_builtins
Like builtins but for disabled builtin commands.
reswords
This array contains the enabled reserved words.
dis_reswords
Like reswords but for disabled reserved words.
aliases
This maps the names of the regular aliases currently enabled to
their expansions.
dis_aliases
Like raliases but for disabled regular aliases.
galiases
Like raliases, but for global aliases.
dis_galiases
Like galiases but for disabled global aliases.
parameters
The keys in this associative array are the names of the parame‐
ters currently defined. The values are strings describing the
type of the parameter, in the same format used by the t parame‐
ter flag, see zshexpn(1) . Setting or unsetting keys in this
array is not possible.
modules
An associative array giving information about modules. The keys
are the names of the modules loaded, registered to be
autoloaded, or aliased. The value says which state the named
module is in and is one of the strings `loaded', `autoloaded',
or `alias:name', where name is the name the module is aliased
to.
Setting or unsetting keys in this array is not possible.
dirstack
A normal array holding the elements of the directory stack. Note
that the output of the dirs builtin command includes one more
directory, the current working directory.
history
This associative array maps history event numbers to the full
history lines.
historywords
A special array containing the words stored in the history.
jobdirs
This associative array maps job numbers to the directories from
which the job was started (which may not be the current direc‐
tory of the job).
jobtexts
This associative array maps job numbers to the texts of the com‐
mand lines that were used to start the jobs.
jobstates
This associative array gives information about the states of the
jobs currently known. The keys are the job numbers and the val‐
ues are strings of the form `job-state:mark:pid=state...'. The
job-state gives the state the whole job is currently in, one of
`running', `suspended', or `done'. The mark is `+' for the cur‐
rent job, `-' for the previous job and empty otherwise. This is
followed by one `pid=state' for every process in the job. The
pids are, of course, the process IDs and the state describes the
state of that process.
nameddirs
This associative array maps the names of named directories to
the pathnames they stand for.
userdirs
This associative array maps user names to the pathnames of their
home directories.
funcstack
This array contains the names of the functions currently being
executed. The first element is the name of the function using
the parameter.
THE ZSH/SCHED MODULE
The zsh/sched module makes available one builtin command:
sched [+]hh:mm command ...
sched [ -item ]
Make an entry in the scheduled list of commands to execute. The
time may be specified in either absolute or relative time. With
no arguments, prints the list of scheduled commands. With the
argument `-item', removes the given item from the list.
THE ZSH/STAT MODULE
The zsh/stat module makes available one builtin command:
stat [ -gnNolLtTrs ] [ -f fd ] [ -H hash ] [ -A array ] [ -F fmt ] [
+element ] [ file ... ]
The command acts as a front end to the stat system call (see
stat(2)). If the stat call fails, the appropriate system error
message printed and status 1 is returned. The fields of struct
stat give information about the files provided as arguments to
the command. In addition to those available from the stat call,
an extra element `link' is provided. These elements are:
device The number of the device on which the file resides.
inode The unique number of the file on this device (`inode'
number).
mode The mode of the file; that is, the file's type and access
permissions. With the -s option, this will be returned
as a string corresponding to the first column in the dis‐
play of the ls -l command.
nlink The number of hard links to the file.
uid The user ID of the owner of the file. With the -s
option, this is displayed as a user name.
gid The group ID of the file. With the -s option, this is
displayed as a group name.
rdev The raw device number. This is only useful for special
devices.
size The size of the file in bytes.
atime
mtime
ctime The last access, modification and inode change times of
the file, respectively, as the number of seconds since
midnight GMT on 1st January, 1970. With the -s option,
these are printed as strings for the local time zone; the
format can be altered with the -F option, and with the -g
option the times are in GMT.
blksize
The number of bytes in one allocation block on the device
on which the file resides.
block The number of disk blocks used by the file.
link If the file is a link and the -L option is in effect,
this contains the name of the file linked to, otherwise
it is empty. Note that if this element is selected
(``stat +link'') then the -L option is automatically
used.
A particular element may be selected by including its name pre‐
ceded by a `+' in the option list; only one element is allowed.
The element may be shortened to any unique set of leading char‐
acters. Otherwise, all elements will be shown for all files.
Options:
-A array
Instead of displaying the results on standard output,
assign them to an array, one struct stat element per
array element for each file in order. In this case nei‐
ther the name of the element nor the name of the files
appears in array unless the -t or -n options were given,
respectively. If -t is given, the element name appears
as a prefix to the appropriate array element; if -n is
given, the file name appears as a separate array element
preceding all the others. Other formatting options are
respected.
-H hash
Similar to -A, but instead assign the values to hash.
The keys are the elements listed above. If the -n option
is provided then the name of the file is included in the
hash with key name.
-f fd Use the file on file descriptor fd instead of named
files; no list of file names is allowed in this case.
-F fmt Supplies a strftime (see strftime(3)) string for the for‐
matting of the time elements. The -s option is implied.
-g Show the time elements in the GMT time zone. The -s
option is implied.
-l List the names of the type elements (to standard output
or an array as appropriate) and return immediately;
options other than -A and arguments are ignored.
-L Perform an lstat (see lstat(2)) rather than a stat system
call. In this case, if the file is a link, information
about the link itself rather than the target file is
returned. This option is required to make the link ele‐
ment useful.
-n Always show the names of files. Usually these are only
shown when output is to standard output and there is more
than one file in the list.
-N Never show the names of files.
-o If a raw file mode is printed, show it in octal, which is
more useful for human consumption than the default of
decimal. A leading zero will be printed in this case.
Note that this does not affect whether a raw or formatted
file mode is shown, which is controlled by the -r and -s
options, nor whether a mode is shown at all.
-r Print raw data (the default format) alongside string data
(the -s format); the string data appears in parentheses
after the raw data.
-s Print mode, uid, gid and the three time elements as
strings instead of numbers. In each case the format is
like that of ls -l.
-t Always show the type names for the elements of struct
stat. Usually these are only shown when output is to
standard output and no individual element has been
selected.
-T Never show the type names of the struct stat elements.
THE ZSH/TERMCAP MODULE
The zsh/termcap module makes available one builtin command:
echotc cap [ arg ... ]
Output the termcap value corresponding to the capability cap,
with optional arguments.
The zsh/termcap module makes available one parameter:
termcap
An associative array that maps termcap capability codes to their
values.
THE ZSH/TERMINFO MODULE
The zsh/terminfo module makes available one builtin command:
echoti cap
Output the terminfo value corresponding to the capability cap.
The zsh/terminfo module makes available one parameter:
terminfo
An associative array that maps terminfo capability names to
their values.
THE ZSH/ZFTP MODULE
The zsh/zftp module makes available one builtin command:
zftp subcommand [ args ]
The zsh/zftp module is a client for FTP (file transfer proto‐
col). It is implemented as a builtin to allow full use of shell
command line editing, file I/O, and job control mechanisms.
Often, users will access it via shell functions providing a more
powerful interface; a set is provided with the zsh distribution
and is described in zshzftpsys(1). However, the zftp command is
entirely usable in its own right.
All commands consist of the command name zftp followed by the
name of a subcommand. These are listed below. The return sta‐
tus of each subcommand is supposed to reflect the success or
failure of the remote operation. See a description of the vari‐
able ZFTP_VERBOSE for more information on how responses from the
server may be printed.
Subcommands
open host [ user [ password [ account ] ] ]
Open a new FTP session to host, which may be the name of a
TCP/IP connected host or an IP number in the standard dot nota‐
tion. Remaining arguments are passed to the login subcommand.
Note that if no arguments beyond host are supplied, open will
not automatically call login. If no arguments at all are sup‐
plied, open will use the parameters set by the params subcom‐
mand.
After a successful open, the shell variables ZFTP_HOST, ZFTP_IP
and ZFTP_SYSTEM are available; see `Variables' below.
login [ name [ password [ account ] ] ]
user [ name [ password [ account ] ] ]
Login the user name with parameters password and account. Any
of the parameters can be omitted, and will be read from standard
input if needed (name is always needed). If standard input is a
terminal, a prompt for each one will be printed on standard
error and password will not be echoed. If any of the parameters
are not used, a warning message is printed.
After a successful login, the shell variables ZFTP_USER,
ZFTP_ACCOUNT and ZFTP_PWD are available; see `Variables' below.
This command may be re-issued when a user is already logged in,
and the server will first be reinitialized for a new user.
params [ host [ user [ password [ account ] ] ] ]
params -
Store the given parameters for a later open command with no
arguments. Only those given on the command line will be remem‐
bered. If no arguments are given, the parameters currently set
are printed, although the password will appear as a line of
stars; the return value is one if no parameters were set, zero
otherwise.
Any of the parameters may be specified as a `?', which may need
to be quoted to protect it from shell expansion. In this case,
the appropriate parameter will be read from stdin as with the
login subcommand, including special handling of password. If
the `?' is followed by a string, that is used as the prompt for
reading the parameter instead of the default message (any neces‐
sary punctuation and whitespace should be included at the end of
the prompt). The first letter of the parameter (only) may be
quoted with a `\'; hence an argument "\\$word" guarantees that
the string from the shell parameter $word will be treated liter‐
ally, whether or not it begins with a `?'.
If instead a single `-' is given, the existing parameters, if
any, are deleted. In that case, calling open with no arguments
will cause an error.
The list of parameters is not deleted after a close, however it
will be deleted if the zsh/zftp module is unloaded.
For example,
zftp params ftp.elsewhere.xx juser '?Password for juser: '
will store the host ftp.elsewhere.xx and the user juser and then
prompt the user for the corresponding password with the given
prompt.
test Test the connection; if the server has reported that it has
closed the connection (maybe due to a timeout), return status 2;
if no connection was open anyway, return status 1; else return
status 0. The test subcommand is silent, apart from messages
printed by the $ZFTP_VERBOSE mechanism, or error messages if the
connection closes. There is no network overhead for this test.
The test is only supported on systems with either the select(2)
or poll(2) system calls; otherwise the message `not supported on
this system' is printed instead.
The test subcommand will automatically be called at the start of
any other subcommand for the current session when a connection
is open.
cd directory
Change the remote directory to directory. Also alters the shell
variable ZFTP_PWD.
cdup Change the remote directory to the one higher in the directory
tree. Note that cd .. will also work correctly on non-UNIX sys‐
tems.
dir [ args... ]
Give a (verbose) listing of the remote directory. The args are
passed directly to the server. The command's behaviour is imple‐
mentation dependent, but a UNIX server will typically interpret
args as arguments to the ls command and with no arguments return
the result of `ls -l'. The directory is listed to standard out‐
put.
ls [ args ]
Give a (short) listing of the remote directory. With no args,
produces a raw list of the files in the directory, one per line.
Otherwise, up to vagaries of the server implementation, behaves
similar to dir.
type [ type ]
Change the type for the transfer to type, or print the current
type if type is absent. The allowed values are `A' (ASCII), `I'
(Image, i.e. binary), or `B' (a synonym for `I').
The FTP default for a transfer is ASCII. However, if zftp finds
that the remote host is a UNIX machine with 8-bit byes, it will
automatically switch to using binary for file transfers upon
open. This can subsequently be overridden.
The transfer type is only passed to the remote host when a data
connection is established; this command involves no network
overhead.
ascii The same as type A.
binary The same as type I.
mode [ S | B ]
Set the mode type to stream (S) or block (B). Stream mode is
the default; block mode is not widely supported.
remote files...
local [ files... ]
Print the size and last modification time of the remote or local
files. If there is more than one item on the list, the name of
the file is printed first. The first number is the file size,
the second is the last modification time of the file in the for‐
mat CCYYMMDDhhmmSS consisting of year, month, date, hour, min‐
utes and seconds in GMT. Note that this format, including the
length, is guaranteed, so that time strings can be directly com‐
pared via the [[ builtin's < and > operators, even if they are
too long to be represented as integers.
Not all servers support the commands for retrieving this infor‐
mation. In that case, the remote command will print nothing and
return status 2, compared with status 1 for a file not found.
The local command (but not remote) may be used with no argu‐
ments, in which case the information comes from examining file
descriptor zero. This is the same file as seen by a put command
with no further redirection.
get file [...]
Retrieve all files from the server, concatenating them and send‐
ing them to standard output.
put file [...]
For each file, read a file from standard input and send that to
the remote host with the given name.
append file [...]
As put, but if the remote file already exists, data is appended
to it instead of overwriting it.
getat file point
putat file point
appendat file point
Versions of get, put and append which will start the transfer at
the given point in the remote file. This is useful for append‐
ing to an incomplete local file. However, note that this abil‐
ity is not universally supported by servers (and is not quite
the behaviour specified by the standard).
delete file [...]
Delete the list of files on the server.
mkdir directory
Create a new directory directory on the server.
rmdir directory
Delete the directory directory on the server.
rename old-name new-name
Rename file old-name to new-name on the server.
site args...
Send a host-specific command to the server. You will probably
only need this if instructed by the server to use it.
quote args...
Send the raw FTP command sequence to the server. You should be
familiar with the FTP command set as defined in RFC959 before
doing this. Useful commands may include STAT and HELP. Note
also the mechanism for returning messages as described for the
variable ZFTP_VERBOSE below, in particular that all messages
from the control connection are sent to standard error.
close
quit Close the current data connection. This unsets the shell param‐
eters ZFTP_HOST, ZFTP_IP, ZFTP_SYSTEM, ZFTP_USER, ZFTP_ACCOUNT,
ZFTP_PWD, ZFTP_TYPE and ZFTP_MODE.
session [ sessname ]
Allows multiple FTP sessions to be used at once. The name of
the session is an arbitrary string of characters; the default
session is called `default'. If this command is called without
an argument, it will list all the current sessions; with an
argument, it will either switch to the existing session called
sessname, or create a new session of that name.
Each session remembers the status of the connection, the set of
connection-specific shell parameters (the same set as are unset
when a connection closes, as given in the description of close),
and any user parameters specified with the params subcommand.
Changing to a previous session restores those values; changing
to a new session initialises them in the same way as if zftp had
just been loaded. The name of the current session is given by
the parameter ZFTP_SESSION.
rmsession [ sessname ]
Delete a session; if a name is not given, the current session is
deleted. If the current session is deleted, the earliest exist‐
ing session becomes the new current session, otherwise the cur‐
rent session is not changed. If the session being deleted is
the only one, a new session called `default' is created and
becomes the current session; note that this is a new session
even if the session being deleted is also called `default'. It
is recommended that sessions not be deleted while background
commands which use zftp are still active.
Parameters
The following shell parameters are used by zftp. Currently none of
them are special.
ZFTP_TMOUT
Integer. The time in seconds to wait for a network operation to
complete before returning an error. If this is not set when the
module is loaded, it will be given the default value 60. A
value of zero turns off timeouts. If a timeout occurs on the
control connection it will be closed. Use a larger value if
this occurs too frequently.
ZFTP_IP
Readonly. The IP address of the current connection in dot nota‐
tion.
ZFTP_HOST
Readonly. The hostname of the current remote server. If the
host was opened as an IP number, ZFTP_HOST contains that
instead; this saves the overhead for a name lookup, as IP num‐
bers are most commonly used when a nameserver is unavailable.
ZFTP_SYSTEM
Readonly. The system type string returned by the server in
response to an FTP SYST request. The most interesting case is a
string beginning "UNIX Type: L8", which ensures maximum compati‐
bility with a local UNIX host.
ZFTP_TYPE
Readonly. The type to be used for data transfers , either `A'
or `I'. Use the type subcommand to change this.
ZFTP_USER
Readonly. The username currently logged in, if any.
ZFTP_ACCOUNT
Readonly. The account name of the current user, if any. Most
servers do not require an account name.
ZFTP_PWD
Readonly. The current directory on the server.
ZFTP_CODE
Readonly. The three digit code of the last FTP reply from the
server as a string. This can still be read after the connection
is closed, and is not changed when the current session changes.
ZFTP_REPLY
Readonly. The last line of the last reply sent by the server.
This can still be read after the connection is closed, and is
not changed when the current session changes.
ZFTP_SESSION
Readonly. The name of the current FTP session; see the descrip‐
tion of the session subcommand.
ZFTP_PREFS
A string of preferences for altering aspects of zftp's behav‐
iour. Each preference is a single character. The following are
defined:
P Passive: attempt to make the remote server initiate data
transfers. This is slightly more efficient than sendport
mode. If the letter S occurs later in the string, zftp
will use sendport mode if passive mode is not available.
S Sendport: initiate transfers by the FTP PORT command.
If this occurs before any P in the string, passive mode
will never be attempted.
D Dumb: use only the bare minimum of FTP commands. This
prevents the variables ZFTP_SYSTEM and ZFTP_PWD from
being set, and will mean all connections default to ASCII
type. It may prevent ZFTP_SIZE from being set during a
transfer if the server does not send it anyway (many
servers do).
If ZFTP_PREFS is not set when zftp is loaded, it will be set to
a default of `PS', i.e. use passive mode if available, otherwise
fall back to sendport mode.
ZFTP_VERBOSE
A string of digits between 0 and 5 inclusive, specifying which
responses from the server should be printed. All responses go
to standard error. If any of the numbers 1 to 5 appear in the
string, raw responses from the server with reply codes beginning
with that digit will be printed to standard error. The first
digit of the three digit reply code is defined by RFC959 to cor‐
respond to:
1. A positive preliminary reply.
2. A positive completion reply.
3. A positive intermediate reply.
4. A transient negative completion reply.
5. A permanent negative completion reply.
It should be noted that, for unknown reasons, the reply `Service
not available', which forces termination of a connection, is
classified as 421, i.e. `transient negative', an interesting
interpretation of the word `transient'.
The code 0 is special: it indicates that all but the last line
of multiline replies read from the server will be printed to
standard error in a processed format. By convention, servers
use this mechanism for sending information for the user to read.
The appropriate reply code, if it matches the same response,
takes priority.
If ZFTP_VERBOSE is not set when zftp is loaded, it will be set
to the default value 450, i.e., messages destined for the user
and all errors will be printed. A null string is valid and
specifies that no messages should be printed.
Functions
zftp_chpwd
If this function is set by the user, it is called every time the
directory changes on the server, including when a user is logged
in, or when a connection is closed. In the last case, $ZFTP_PWD
will be unset; otherwise it will reflect the new directory.
zftp_progress
If this function is set by the user, it will be called during a
get, put or append operation each time sufficient data has been
received from the host. During a get, the data is sent to stan‐
dard output, so it is vital that this function should write to
standard error or directly to the terminal, not to standard out‐
put.
When it is called with a transfer in progress, the following
additional shell parameters are set:
ZFTP_FILE
The name of the remote file being transferred from or to.
ZFTP_TRANSFER
A G for a get operation and a P for a put operation.
ZFTP_SIZE
The total size of the complete file being transferred:
the same as the first value provided by the remote and
local subcommands for a particular file. If the server
cannot supply this value for a remote file being
retrieved, it will not be set. If input is from a pipe
the value may be incorrect and correspond simply to a
full pipe buffer.
ZFTP_COUNT
The amount of data so far transferred; a number between
zero and $ZFTP_SIZE, if that is set. This number is
always available.
The function is initially called with ZFTP_TRANSFER set appro‐
priately and ZFTP_COUNT set to zero. After the transfer is fin‐
ished, the function will be called one more time with
ZFTP_TRANSFER set to GF or PF, in case it wishes to tidy up. It
is otherwise never called twice with the same value of
ZFTP_COUNT.
Sometimes the progress meter may cause disruption. It is up to
the user to decide whether the function should be defined and to
use unfunction when necessary.
Problems
A connection may not be opened in the left hand side of a pipe as this
occurs in a subshell and the file information is not updated in the
main shell. In the case of type or mode changes or closing the connec‐
tion in a subshell, the information is returned but variables are not
updated until the next call to zftp. Other status changes in subshells
will not be reflected by changes to the variables (but should be other‐
wise harmless).
Deleting sessions while a zftp command is active in the background can
have unexpected effects, even if it does not use the session being
deleted. This is because all shell subprocesses share information on
the state of all connections, and deleting a session changes the order‐
ing of that information.
On some operating systems, the control connection is not valid after a
fork(), so that operations in subshells, on the left hand side of a
pipeline, or in the background are not possible, as they should be.
This is presumably a bug in the operating system.
THE ZSH/ZLE MODULE
The zsh/zle module contains the Zsh Line Editor. See zshzle(1).
THE ZSH/ZLEPARAMETER MODULE
The zsh/zleparameter module defines two special parameters that can be
used to access internal information of the Zsh Line Editor (see zsh‐
zle(1)).
keymaps
This array contains the names of the keymaps currently defined.
widgets
This associative array contains one entry per widget defined.
The name of the widget is the key and the value gives informa‐
tion about the widget. It is either the string `builtin' for
builtin widgets, a string of the form `user:name' for
user-defined widgets, where name is the name of the shell func‐
tion implementing the widget, or it is a string of the form
`completion:type:name', for completion widgets. In the last case
type is the name of the builtin widgets the completion widget
imitates in its behavior and name is the name of the shell func‐
tion implementing the completion widget.
THE ZSH/ZPROF MODULE
When loaded, the zsh/zprof causes shell functions to be profiled. The
profiling results can be obtained with the zprof builtin command made
available by this module. There is no way to turn profiling off other
than unloading the module.
zprof [ -c ]
Without the -c option, zprof lists profiling results to standard
output. The format is comparable to that of commands like
gprof.
At the top there is a summary listing all functions that were
called at least once. This summary is sorted in decreasing
order of the amount of time spent in each. The lines contain
the number of the function in order, which is used in other
parts of the list in suffixes of the form `[num]'.RE, then the
number of calls made to the function. The next three columns
list the time in milliseconds spent in the function and its
descendents, the average time in milliseconds spent in the func‐
tion and its descendents per call and the percentage of time
spent in all shell functions used in this function and its
descendents. The following three columns give the same informa‐
tion, but counting only the time spent in the function itself.
The final column shows the name of the function.
After the summary, detailed information about every function
that was invoked is listed, sorted in decreasing order of the
amount of time spent in each function and its descendents. Each
of these entries consists of descriptions for the functions that
called the function described, the function itself, and the
functions that were called from it. The description for the
function itself has the same format as in the summary (and shows
the same information). The other lines don't show the number of
the function at the beginning and have their function named
indented to make it easier to distinguish the line showing the
function described in the section from the surrounding lines.
The information shown in this case is almost the same as in the
summary, but only refers to the call hierarchy being displayed.
For example, for a calling function the column showing the total
running time lists the time spent in the described function and
its descendents only for the times when it was called from that
particular calling function. Likewise, for a called function,
this columns lists the total time spent in the called function
and its descendents only for the times when it was called from
the function described.
Also in this case, the column showing the number of calls to a
function also shows a slash and then the total number of invoca‐
tions made to the called function.
As long as the zsh/zprof module is loaded, profiling will be
done and multiple invocations of the zprof builtin command will
show the times and numbers of calls since the module was loaded.
With the -c option, the zprof builtin command will reset its
internal counters and will not show the listing. )
THE ZSH/ZPTY MODULE
The zsh/zpty module offers one builtin:
zpty [ -e ] [ -b ] name [ arg ... ]
The arguments following name are concatenated with spaces
between, then executed as a command, as if passed to the eval
builtin. The command runs under a newly assigned pseudo-termi‐
nal; this is useful for running commands non-interactively which
expect an interactive environment. The name is not part of the
command, but is used to refer to this command in later calls to
zpty.
With the -e option, the pseudo-terminal is set up so that input
characters are echoed.
With the -b option, input to and output from the pseudo-terminal
are made non-blocking.
zpty -d [ names ... ]
The second form, with the -d option, is used to delete commands
previously started, by supplying a list of their names. If no
names are given, all commands are deleted. Deleting a command
causes the HUP signal to be sent to the corresponding process.
zpty -w [ -n ] name [ strings ... ]
The -w option can be used to send the to command name the given
strings as input (separated by spaces). If the -n option is not
given, a newline is added at the end.
If no strings are provided, the standard input is copied to the
pseudo-terminal; this may stop before copying the full input if
the pseudo-terminal is non-blocking.
Note that the command under the pseudo-terminal sees this input
as if it were typed, so beware when sending special tty driver
characters such as word-erase, line-kill, and end-of-file.
zpty -r [ -t ] name [ param [ pattern ] ]
The -r option can be used to read the output of the command
name. With only a name argument, the output read is copied to
the standard output. Unless the pseudo-terminal is non-block‐
ing, copying continues until the command under the pseudo-termi‐
nal exits; when non-blocking, only as much output as is immedi‐
ately available is copied. The return value is zero if any out‐
put is copied.
When also given a param argument, at most one line is read and
stored in the parameter named param. Less than a full line may
be read if the pseudo-terminal is non-blocking. The return
value is zero if at least one character is stored in param.
If a pattern is given as well, output is read until the whole
string read matches the pattern, even in the non-blocking case.
The return value is zero if the string read matches the pattern,
or if the command has exited but at least one character could
still be read. As of this writing, a maximum of one megabyte of
output can be consumed this way; if a full megabyte is read
without matching the pattern, the return value is non-zero.
In all cases, the return value is non-zero if nothing could be
read, and is 2 if this is because the command has finished.
If the -r option is combined with the -t option, zpty tests
whether output is available before trying to read. If no output
is available, zpty immediately returns the value 1.
zpty -t name
The -t option without the -r option can be used to test whether
the command name is still running. It returns a zero value if
the command is running and a non-zero value otherwise.
zpty [ -L ]
The last form, without any arguments, is used to list the com‐
mands currently defined. If the -L option is given, this is
done in the form of calls to the zpty builtin.
THE ZSH/ZUTIL MODULE
The zsh/zutil module only adds some builtins:
zstyle [ -L ]
zstyle [ -e | - | -- ] pattern style strings ...
zstyle -d [ pattern [ styles ... ] ]
zstyle -g name [ pattern [ style ] ]
zstyle -abs context style name [ sep ]
zstyle -Tt context style [ strings ...]
zstyle -m context style pattern
This builtin command is used to define and lookup styles.
Styles are pairs of names and values, where the values consist
of any number of strings. They are stored together with pat‐
terns and lookup is done by giving a string, called the `con‐
text', which is compared to the patterns. The definition stored
for the first matching pattern will be returned.
For ordering of comparisons, patterns are searched from most
specific to least specific, and patterns that are equally spe‐
cific keep the order in which they were defined. A pattern is
considered to be more specific than another if it contains more
components (substrings separated by colons) or if the patterns
for the components are more specific, where simple strings are
considered to be more specific than patterns and complex pat‐
terns are considered to be more specific than the pattern `*'.
The first form (without arguments) lists the definitions in the
order zstyle will test them. If the -L option is given, listing
is done in the form of calls to zstyle. Forms with arguments:
zstyle [ - | -- | -e ] pattern style strings ...
Defines the given style for the pattern with the strings
as the value. If the -e option is given, the strings
will be concatenated (separated by spaces) and the
resulting string will be evaluated (in the same way as it
is done by the eval builtin command) when the style is
looked up. In this case the parameter `reply' must be
assigned to set the strings returned after the evalua‐
tion. Before evaluating the value, reply is unset, and
if it is still unset after the evaluation, the style is
treated as if it were not set.
zstyle -d [ pattern [ styles ... ] ]
Delete style definitions. Without arguments all defini‐
tions are deleted, with a pattern all definitions for
that pattern are deleted and if any styles are given,
then only those styles are deleted for the pattern.
zstyle -g name [ pattern [ style ] ]
Retrieve a style definition. The name is used as the name
of an array in which the results are stored. Without any
further arguments, all patterns defined are returned.
With a pattern the styles defined for that pattern are
returned and with both a pattern and a style, the value
strings of that combination is returned.
The other forms can be used to look up or test patterns.
zstyle -s context style name [ sep ]
The parameter name is set to the value of the style
interpreted as a string. If the value contains several
strings they are concatenated with spaces (or with the
sep string if that is given) between them.
zstyle -b context style name
The value is stored in name as a boolean, i.e. as the
string `yes' if the value has only one string and that
string is equal to one of `yes', `true', `on', or `1'. If
the value is any other string or has more than one
string, the parameter is set to `no'.
zstyle -a context style name
The value is stored in name as an array. If name is
declared as an associative array, the first, third, etc.
strings are used as the keys and the other strings are
used as the values.
zstyle -t context style [ strings ...]
zstyle -T context style [ strings ...]
Test the value of a style, i.e. the -t option only
returns a status (sets $?). Without any strings the
return status is zero if the style is defined for at
least one matching pattern, has only one string in its
value, and that is equal to one of `true', `yes', `on' or
`1'. If any strings are given the status is zero if and
only if at least one of the strings is equal to at least
one of the strings in the value. If the style is not
defined, the status is 2.
The -T option tests the values of the style like -t, but
it returns zero (rather than 2) if the style is not
defined for any matching pattern.
zstyle -m context style pattern
Match a value. Returns status zero if the pattern matches
at least one of the strings in the value.
zformat -f param format specs ...
zformat -a array sep specs ...
This builtin provides two different forms of formatting. The
first form is selected with the -f option. In this case the for‐
mat string will be modified by replacing sequences starting with
a percent sign in it with strings from the specs. Each spec
should be of the form `char:string' which will cause every
appearance of the sequence `%char' in format to be replaced by
the string. The `%' sequence may also contain optional minimum
and maximum field width specifications between the `%' and the
`char' in the form `%min.maxc', i.e. the minimum field width is
given first and if the maximum field width is used, it has to be
preceded by a dot. Specifying a minimum field width makes the
result be padded with spaces to the right if the string is
shorter than the requested width. Padding to the left can be
achieved by giving a negative minimum field width. If a maximum
field width is specified, the string will be truncated after
that many characters. After all `%' sequences for the given
specs have been processed, the resulting string is stored in the
parameter param.
The second form, using the -a option, can be used for aligning
strings. Here, the specs are of the form `left:right' where
`left' and `right' are arbitrary strings. These strings are
modified by replacing the colons by the sep string and padding
the left strings with spaces to the right so that the sep
strings in the result (and hence the right strings after them)
are all aligned if the strings are printed below each other.
All strings without a colon are left unchanged and all strings
with an empty right string have the trailing colon removed. In
both cases the lengths of the strings are not used to determine
how the other strings are to be aligned. The resulting strings
are stored in the array.
zregexparse
This implements some internals of the _regex_arguments function.
zparseopts [ -D ] [ -K ] [ -E ] [ -a array ] [ -A assoc ] specs
This builtin simplifies the parsing of options in positional
parameters, i.e. the set of arguments given by $*. Each spec
describes one option and must be of the form `opt[=array]'. If
an option described by opt is found in the positional parameters
it is copied into the array specified with the -a option; if the
optional `=array' is given, it is instead copied into that
array.
Note that it is an error to give any spec without an `=array'
unless one of the -a or -A options is used.
Unless the -E option is given, parsing stops at the first string
that isn't described by one of the specs. Even with -E, parsing
always stops at a positional parameter equal to `-' or `--'.
The opt description must be one of the following. Any of the
special characters can appear in the option name provided it is
preceded by a backslash.
name
name+ The name is the name of the option without the leading
`-'. To specify a GNU-style long option, one of the
usual two leading `-' must be included in name; for exam‐
ple, a `--file' option is represented by a name of
`-file'.
If a `+' appears after name, the option is appended to
array each time it is found in the positional parameters;
without the `+' only the last occurrence of the option is
preserved.
If one of these forms is used, the option takes no argu‐
ment, so parsing stops if the next positional parameter
does not also begin with `-' (unless the -E option is
used).
name:
name:-
name:: If one or two colons are given, the option takes an argu‐
ment; with one colon, the argument is mandatory and with
two colons it is optional. The argument is appended to
the array after the option itself.
An optional argument is put into the same array element
as the option name (note that this makes empty strings as
arguments indistinguishable). A mandatory argument is
added as a separate element unless the `:-' form is used,
in which case the argument is put into the same element.
A `+' as described above may appear between the name and
the first colon.
The options of zparseopts itself are:
-a array
As described above, this names the default array in which to
store the recognised options.
-A assoc
If this is given, the options and their values are also put into
an associative array with the option names as keys and the argu‐
ments (if any) as the values.
-D If this option is given, all options found are removed from the
positional parameters of the calling shell or shell function, up
to but not including any not described by the specs. This is
similar to using the shift builtin.
-K With this option, the arrays specified with the -a and -A
options and with the `=array' forms are kept unchanged when none
of the specs for them is used. This allows assignment of
default values to them before calling zparseopts.
-E This changes the parsing rules to not stop at the first string
that isn't described by one of the specs. It can be used to
test for or (if used together with -D) extract options and their
arguments, ignoring all other options and arguments that may be
in the positional parameters.
For example,
set -- -a -bx -c y -cz baz -cend
zparseopts a=foo b:=bar c+:=bar
will have the effect of
foo=(-a)
bar=(-b x -c y -c z)
The arguments from `baz' on will not be used.
As an example for the -E option, consider:
set -- -a x -b y -c z arg1 arg2
zparseopts -E -D b:=bar
will have the effect of
bar=(-b y)
set -- -a x -c z arg1 arg2
I.e., the option -b and its arguments are taken from the positional
parameters and put into the array bar.
ZSHZFTPSYS(1)ZSHZFTPSYS(1)NAME
zshzftpsys - zftp function front-end
DESCRIPTION
This describes the set of shell functions supplied with the source dis‐
tribution as an interface to the zftp builtin command, allowing you to
perform FTP operations from the shell command line or within functions
or scripts. The interface is similar to a traditional FTP client (e.g.
the ftp command itself, see ftp(1)), but as it is entirely done within
the shell all the familiar completion, editing and globbing features,
and so on, are present, and macros are particularly simple to write as
they are just ordinary shell functions.
The prerequisite is that the zftp command, as described in zshmod‐
ules(1) , must be available in the version of zsh installed at your
site. If the shell is configured to load new commands at run time, it
probably is: typing `zmodload zsh/zftp' will make sure (if that runs
silently, it has worked). If this is not the case, it is possible zftp
was linked into the shell anyway: to test this, type `which zftp' and
if zftp is available you will get the message `zftp: shell built-in
command'.
Commands given directly with zftp builtin may be interspersed between
the functions in this suite; in a few cases, using zftp directly may
cause some of the status information stored in shell parameters to
become invalid. Note in particular the description of the variables
$ZFTP_TMOUT, $ZFTP_PREFS and $ZFTP_VERBOSE for zftp.
INSTALLATION
You should make sure all the functions from the Functions/Zftp direc‐
tory of the source distribution are available; they all begin with the
two letters `zf'. They may already have been installed on your system;
otherwise, you will need to find them and copy them. The directory
should appear as one of the elements of the $fpath array (this should
already be the case if they were installed), and at least the function
zfinit should be autoloaded; it will autoload the rest. Finally, to
initialize the use of the system you need to call the zfinit function.
The following code in your .zshrc will arrange for this; assume the
functions are stored in the directory ~/myfns:
fpath=(~/myfns $fpath)
autoload -U zfinit
zfinit
Note that zfinit assumes you are using the zmodload method to load the
zftp command. If it is already built into the shell, change zfinit to
zfinit -n. It is helpful (though not essential) if the call to zfinit
appears after any code to initialize the new completion system, else
unnecessary compctl commands will be given.
FUNCTIONS
The sequence of operations in performing a file transfer is essentially
the same as that in a standard FTP client. Note that, due to a quirk
of the shell's getopts builtin, for those functions that handle options
you must use `--' rather than `-' to ensure the remaining arguments are
treated literally (a single `-' is treated as an argument).
Opening a connection
zfparams [ host [ user [ password ... ] ] ]
Set or show the parameters for a future zfopen with no argu‐
ments. If no arguments are given, the current parameters are
displayed (the password will be shown as a line of asterisks).
If a host is given, and either the user or password is not, they
will be prompted for; also, any parameter given as `?' will be
prompted for, and if the `?' is followed by a string, that will
be used as the prompt. As zfopen calls zfparams to store the
parameters, this usually need not be called directly.
A single argument `-' will delete the stored parameters. This
will also cause the memory of the last directory (and so on) on
the other host to be deleted.
zfopen [ -1 ] [ host [ user [ password [ account ] ] ] ]
If host is present, open a connection to that host under user‐
name user with password password (and, on the rare occasions
when it is necessary, account account). If a necessary parame‐
ter is missing or given as `?' it will be prompted for. If host
is not present, use a previously stored set of parameters.
If the command was successful, and the terminal is compatible
with xterm or is sun-cmd, a summary will appear in the title
bar, giving the local host:directory and the remote host:direc‐
tory; this is handled by the function zftp_chpwd, described
below.
Normally, the host, user and password are internally recorded
for later re-opening, either by a zfopen with no arguments, or
automatically (see below). With the option `-1', no information
is stored. Also, if an open command with arguments failed, the
parameters will not be retained (and any previous parameters
will also be deleted). A zfopen on its own, or a zfopen -1,
never alters the stored parameters.
Both zfopen and zfanon (but not zfparams) understand URLs of the
form ftp://host/path... as meaning to connect to the host, then
change directory to path (which must be a directory, not a
file). The `ftp://' can be omitted; the trailing `/' is enough
to trigger recognition of the path. Note prefixes other than
`ftp:' are not recognized, and that all characters after the
first slash beyond host are significant in path.
zfanon [ -1 ] host
Open a connection host for anonymous FTP. The username used is
`anonymous'. The password (which will be reported the first
time) is generated as user@host; this is then stored in the
shell parameter $EMAIL_ADDR which can alternatively be set manu‐
ally to a suitable string.
Directory management
zfcd [ dir ]
zfcd -
zfcd old new
Change the current directory on the remote server: this is
implemented to have many of the features of the shell builtin
cd.
In the first form with dir present, change to the directory dir.
The command `zfcd ..' is treated specially, so is guaranteed to
work on non-UNIX servers (note this is handled internally by
zftp). If dir is omitted, has the effect of `zfcd ~'.
The second form changes to the directory previously current.
The third form attempts to change the current directory by
replacing the first occurrence of the string old with the string
new in the current directory.
Note that in this command, and indeed anywhere a remote filename
is expected, the string which on the local host corresponds to
`~' is converted back to a `~' before being passed to the remote
machine. This is convenient because of the way expansion is
performed on the command line before zfcd receives a string.
For example, suppose the command is `zfcd ~/foo'. The shell
will expand this to a full path such as `zfcd
/home/user2/pws/foo'. At this stage, zfcd recognises the ini‐
tial path as corresponding to `~' and will send the directory to
the remote host as ~/foo, so that the `~' will be expanded by
the server to the correct remote host directory. Other named
directories of the form `~name' are not treated in this fashion.
zfhere Change directory on the remote server to the one corresponding
to the current local directory, with special handling of `~' as
in zfcd. For example, if the current local directory is
~/foo/bar, then zfhere performs the effect of `zfcd ~/foo/bar'.
zfdir [ -rfd ] [ - ] [ dir-options ] [ dir ]
Produce a long directory listing. The arguments dir-options and
dir are passed directly to the server and their effect is imple‐
mentation dependent, but specifying a particular remote direc‐
tory dir is usually possible. The output is passed through a
pager given by the environment variable $PAGER or defaulting to
`more'.
The directory is usually cached for re-use. In fact, two caches
are maintained. One is for use when there is no dir-options or
dir, i.e. a full listing of the current remote directory; it is
flushed when the current remote directory changes. The other is
kept for repeated use of zfdir with the same arguments; for
example, repeated use of `zfdir /pub/gnu' will only require the
directory to be retrieved on the first call. Alternatively,
this cache can be re-viewed with the -r option. As relative
directories will confuse zfdir, the -f option can be used to
force the cache to be flushed before the directory is listed.
The option -d will delete both caches without showing a direc‐
tory listing; it will also delete the cache of file names in the
current remote directory, if any.
zfls [ ls-options ] [ dir ]
List files on the remote server. With no arguments, this will
produce a simple list of file names for the current remote
directory. Any arguments are passed directly to the server. No
pager and no caching is used.
Status commands
zftype [ type ]
With no arguments, show the type of data to be transferred, usu‐
ally ASCII or binary. With an argument, change the type: the
types `A' or `ASCII' for ASCII data and `B' or `BINARY', `I' or
`IMAGE' for binary data are understood case-insensitively.
zfstat [ -v ]
Show the status of the current or last connection, as well as
the status of some of zftp's status variables. With the -v
option, a more verbose listing is produced by querying the
server for its version of events, too.
Retrieving files
The commands for retrieving files all take at least two options. -G
suppresses remote filename expansion which would otherwise be performed
(see below for a more detailed description of that). -t attempts to
set the modification time of the local file to that of the remote file:
this requires version 5 of perl, see the description of the function
zfrtime below for more information.
zfget [ -Gtc ] file1 ...
Retrieve all the listed files file1 ... one at a time from the
remote server. If a file contains a `/', the full name is
passed to the remote server, but the file is stored locally
under the name given by the part after the final `/'. The
option -c (cat) forces all files to be sent as a single stream
to standard output; in this case the -t option has no effect.
zfuget [ -Gvst ] file1 ...
As zfget, but only retrieve files where the version on the
remote server is newer (has a later modification time), or where
the local file does not exist. If the remote file is older but
the files have different sizes, or if the sizes are the same but
the remote file is newer, the user will usually be queried.
With the option -s, the command runs silently and will always
retrieve the file in either of those two cases. With the option
-v, the command prints more information about the files while it
is working out whether or not to transfer them.
zfcget [ -Gt ] file1 ...
As zfget, but if any of the local files exists, and is shorter
than the corresponding remote file, the command assumes that it
is the result of a partially completed transfer and attempts to
transfer the rest of the file. This is useful on a poor connec‐
tion which keeps failing.
Note that this requires a commonly implemented, but non-stan‐
dard, version of the FTP protocol, so is not guaranteed to work
on all servers.
zfgcp [ -Gt ] remote-file local-file
zfgcp [ -Gt ] rfile1 ... ldir
This retrieves files from the remote server with arguments
behaving similarly to the cp command.
In the first form, copy remote-file from the server to the local
file local-file.
In the second form, copy all the remote files rfile1 ... into
the local directory ldir retaining the same basenames. This
assumes UNIX directory semantics.
Sending files
zfput [ -r ] file1 ...
Send all the file1 ... given separately to the remote server.
If a filename contains a `/', the full filename is used locally
to find the file, but only the basename is used for the remote
file name.
With the option -r, if any of the files are directories they are
sent recursively with all their subdirectories, including files
beginning with `.'. This requires that the remote machine
understand UNIX file semantics, since `/' is used as a directory
separator.
zfuput [ -vs ] file1 ...
As zfput, but only send files which are newer than their local
equivalents, or if the remote file does not exist. The logic is
the same as for zfuget, but reversed between local and remote
files.
zfcput file1 ...
As zfput, but if any remote file already exists and is shorter
than the local equivalent, assume it is the result of an incom‐
plete transfer and send the rest of the file to append to the
existing part. As the FTP append command is part of the stan‐
dard set, this is in principle more likely to work than zfcget.
zfpcp local-file remote-file
zfpcp lfile1 ... rdir
This sends files to the remote server with arguments behaving
similarly to the cp command.
With two arguments, copy local-file to the server as
remote-file.
With more than two arguments, copy all the local files lfile1
... into the existing remote directory rdir retaining the same
basenames. This assumes UNIX directory semantics.
A problem arises if you attempt to use zfpcp lfile1 rdir, i.e.
the second form of copying but with two arguments, as the com‐
mand has no simple way of knowing if rdir corresponds to a
directory or a filename. It attempts to resolve this in various
ways. First, if the rdir argument is `.' or `..' or ends in a
slash, it is assumed to be a directory. Secondly, if the opera‐
tion of copying to a remote file in the first form failed, and
the remote server sends back the expected failure code 553 and a
reply including the string `Is a directory', then zfpcp will
retry using the second form.
Closing the connection
zfclose
Close the connection.
Session management
zfsession [ -lvod ] [ sessname ]
Allows you to manage multiple FTP sessions at once. By default,
connections take place in a session called `default'; by giving
the command `zfsession sessname' you can change to a new or
existing session with a name of your choice. The new session
remembers its own connection, as well as associated shell param‐
eters, and also the host/user parameters set by zfparams. Hence
you can have different sessions set up to connect to different
hosts, each remembering the appropriate host, user and password.
With no arguments, zfsession prints the name of the current ses‐
sion; with the option -l it lists all sessions which currently
exist, and with the option -v it gives a verbose list showing
the host and directory for each session, where the current ses‐
sion is marked with an asterisk. With -o, it will switch to the
most recent previous session.
With -d, the given session (or else the current one) is removed;
everything to do with it is completely forgotten. If it was the
only session, a new session called `default' is created and made
current. It is safest not to delete sessions while background
commands using zftp are active.
zftransfer sess1:file1 sess2:file2
Transfer files between two sessions; no local copy is made. The
file is read from the session sess1 as file1 and written to ses‐
sion sess1 as file file2; file1 and file2 may be relative to the
current directories of the session. Either sess1 or sess2 may
be omitted (though the colon should be retained if there is a
possibility of a colon appearing in the file name) and defaults
to the current session; file2 may be omitted or may end with a
slash, in which case the basename of file1 will be added. The
sessions sess1 and sess2 must be distinct.
The operation is performed using pipes, so it is required that
the connections still be valid in a subshell, which is not the
case under some versions operating systems, presumably due to a
system bug.
Bookmarks
The two functions zfmark and zfgoto allow you to `bookmark' the present
location (host, user and directory) of the current FTP connection for
later use. The file to be used for storing and retrieving bookmarks is
given by the parameter $ZFTP_BMFILE; if not set when one of the two
functions is called, it will be set to the file .zfbkmarks in the
directory where your zsh startup files live (usually ~).
zfmark [ bookmark ]
If given an argument, mark the current host, user and directory
under the name bookmark for later use by zfgoto. If there is no
connection open, use the values for the last connection immedi‐
ately before it was closed; it is an error if there is none.
Any existing bookmark under the same name will be silently
replaced.
If not given an argument, list the existing bookmarks and the
points to which they refer in the form user@host:directory; this
is the format in which they are stored, and the file may be
edited directly.
zfgoto [ -n ] bookmark
Return to the location given by bookmark, as previously set by
zfmark. If the location has user `ftp' or `anonymous', open the
connection with zfanon, so that no password is required. If the
user and host parameters match those stored for the current ses‐
sion, if any, those will be used, and again no password is
required. Otherwise a password will be prompted for.
With the option -n, the bookmark is taken to be a nickname
stored by the ncftp program in its bookmark file, which is
assumed to be ~/.ncftp/bookmarks. The function works identi‐
cally in other ways. Note that there is no mechanism for adding
or modifying ncftp bookmarks from the zftp functions.
Other functions
Mostly, these functions will not be called directly (apart from
zfinit), but are described here for completeness. You may wish to
alter zftp_chpwd and zftp_progress, in particular.
zfinit [ -n ]
As described above, this is used to initialize the zftp function
system. The -n option should be used if the zftp command is
already built into the shell.
zfautocheck [ -dn ]
This function is called to implement automatic reopening behav‐
iour, as described in more detail below. The options must
appear in the first argument; -n prevents the command from
changing to the old directory, while -d prevents it from setting
the variable do_close, which it otherwise does as a flag for
automatically closing the connection after a transfer. The host
and directory for the last session are stored in the variable
$zflastsession, but the internal host/user/password parameters
must also be correctly set.
zfcd_match prefix suffix
This performs matching for completion of remote directory names.
If the remote server is UNIX, it will attempt to persuade the
server to list the remote directory with subdirectories marked,
which usually works but is not guaranteed. On other hosts it
simply calls zfget_match and hence completes all files, not just
directories. On some systems, directories may not even look
like filenames.
zfget_match prefix suffix
This performs matching for completion of remote filenames. It
caches files for the current directory (only) in the shell
parameter $zftp_fcache. It is in the form to be called by the
-K option of compctl, but also works when called from a wid‐
get-style completion function with prefix and suffix set appro‐
priately.
zfrglob varname
Perform remote globbing, as describes in more detail below.
varname is the name of a variable containing the pattern to be
expanded; if there were any matches, the same variable will be
set to the expanded set of filenames on return.
zfrtime lfile rfile [ time ]
Set the local file lfile to have the same modification time as
the remote file rfile, or the explicit time time in FTP format
CCYYMMDDhhmmSS for the GMT timezone.
Currently this requires perl version 5 to perform the conversion
from GMT to local time. This is unfortunately difficult to do
using shell code alone.
zftp_chpwd
This function is called every time a connection is opened, or
closed, or the remote directory changes. This version alters
the title bar of an xterm-compatible or sun-cmd terminal emula‐
tor to reflect the local and remote hostnames and current direc‐
tories. It works best when combined with the function chpwd.
In particular, a function of the form
chpwd() {
if [[ -n $ZFTP_USER ]]; then
zftp_chpwd
else
# usual chpwd e.g put host:directory in title bar
fi
}
fits in well.
zftp_progress
This function shows the status of the transfer. It will not
write anything unless the output is going to a terminal; how‐
ever, if you transfer files in the background, you should turn
off progress reports by hand using `zstyle ':zftp:*' progress
none'. Note also that if you alter it, any output must be to
standard error, as standard output may be a file being received.
The form of the progress meter, or whether it is used at all,
can be configured without altering the function, as described in
the next section.
zffcache
This is used to implement caching of files in the current direc‐
tory for each session separately. It is used by zfget_match and
zfrglob.
MISCELLANEOUS FEATURES
Configuration
Various styles are available using the standard shell style mechanism,
described in zshmodules(1). Briefly, the command `zstyle ':zftp:*'
style value ...'. defines the style to have value value (more than one
may be given, although that is not useful in the cases described here).
These values will then be used throughout the zftp function system.
For more precise control, the first argument, which gives a context in
which the style applies, can be modified to include a particular func‐
tion, as for example `:zftp:zfget': the style will then have the given
value only in the zfget function. Values for the same style in differ‐
ent contexts may be set; the most specific function will be used, where
strings are held to be more specific than patterns, and longer patterns
and shorter patterns. Note that only the top level function name, as
called by the user, is used; calling of lower level functions is trans‐
parent to the user. Hence modifications to the title bar in zftp_chpwd
use the contexts :zftp:zfopen, :zftp:zfcd, etc., depending where it was
called from. The following styles are understood:
progress
Controls the way that zftp_progress reports on the progress of a
transfer. If empty, unset, or `none', no progress report is
made; if `bar' a growing bar of inverse video is shown; if `per‐
cent' (or any other string, though this may change in future),
the percentage of the file transferred is shown. The bar meter
requires that the width of the terminal be available via the
$COLUMNS parameter (normally this is set automatically). If the
size of the file being transferred is not available, bar and
percent meters will simply show the number of bytes transferred
so far.
When zfinit is run, if this style is not defined for the context
:zftp:*, it will be set to `bar'.
update Specifies the minimum time interval between updates of the
progress meter in seconds. No update is made unless new data
has been received, so the actual time interval is limited only
by $ZFTP_TIMEOUT.
As described for progress, zfinit will force this to default to
1.
remote-glob
If set to `1', `yes' or `true', filename generation (globbing)
is performed on the remote machine instead of by zsh itself; see
below.
titlebar
If set to `1', `yes' or `true', zftp_chpwd will put the remote
host and remote directory into the titlebar of terminal emula‐
tors such as xterm or sun-cmd that allow this.
As described for progress, zfinit will force this to default to
1.
chpwd If set to `1' `yes' or `true', zftp_chpwd will call the function
chpwd when a connection is closed. This is useful if the remote
host details were put into the terminal title bar by zftp_chpwd
and your usual chpwd also modifies the title bar.
When zfinit is run, it will determine whether chpwd exists and
if so it will set the default value for the style to 1 if none
exists already.
Note that there is also an associative array zfconfig which contains
values used by the function system. This should not be modified or
overwritten.
Remote globbing
The commands for retrieving files usually perform filename generation
(globbing) on their arguments; this can be turned off by passing the
option -G to each of the commands. Normally this operates by retriev‐
ing a complete list of files for the directory in question, then match‐
ing these locally against the pattern supplied. This has the advantage
that the full range of zsh patterns (respecting the setting of the
option EXTENDED_GLOB) can be used. However, it means that the direc‐
tory part of a filename will not be expanded and must be given exactly.
If the remote server does not support the UNIX directory semantics,
directory handling is problematic and it is recommended that globbing
only be used within the current directory. The list of files in the
current directory, if retrieved, will be cached, so that subsequent
globs in the same directory without an intervening zfcd are much
faster.
If the remote-glob style (see above) is set, globbing is instead per‐
formed on the remote host: the server is asked for a list of matching
files. This is highly dependent on how the server is implemented,
though typically UNIX servers will provide support for basic glob pat‐
terns. This may in some cases be faster, as it avoids retrieving the
entire list of directory contents.
Automatic and temporary reopening
As described for the zfopen command, a subsequent zfopen with no param‐
eters will reopen the connection to the last host (this includes con‐
nections made with the zfanon command). Opened in this fashion, the
connection starts in the default remote directory and will remain open
until explicitly closed.
Automatic re-opening is also available. If a connection is not cur‐
rently open and a command requiring a connection is given, the last
connection is implicitly reopened. In this case the directory which
was current when the connection was closed again becomes the current
directory (unless, of course, the command given changes it). Automatic
reopening will also take place if the connection was close by the
remote server for whatever reason (e.g. a timeout). It is not avail‐
able if the -1 option to zfopen or zfanon was used.
Furthermore, if the command issued is a file transfer, the connection
will be closed after the transfer is finished, hence providing a
one-shot mode for transfers. This does not apply to directory changing
or listing commands; for example a zfdir may reopen a connection but
will leave it open. Also, automatic closure will only ever happen in
the same command as automatic opening, i.e a zfdir directly followed by
a zfget will never close the connection automatically.
Information about the previous connection is given by the zfstat func‐
tion. So, for example, if that reports:
Session: default
Not connected.
Last session: ftp.bar.com:/pub/textfiles
then the command zfget file.txt will attempt to reopen a connection to
ftp.bar.com, retrieve the file /pub/textfiles/file.txt, and immediately
close the connection again. On the other hand, zfcd .. will open the
connection in the directory /pub and leave it open.
Note that all the above is local to each session; if you return to a
previous session, the connection for that session is the one which will
be reopened.
Completion
Completion of local and remote files, directories, sessions and book‐
marks is supported. The older, compctl-style completion is defined
when zfinit is called; support for the new widget-based completion sys‐
tem is provided in the function Completion/Zsh/Command/_zftp, which
should be installed with the other functions of the completion system
and hence should automatically be available.
ZSHCONTRIB(1)ZSHCONTRIB(1)NAME
zshcontrib - user contributions to zsh
DESCRIPTION
The Zsh source distribution includes a number of items contributed by
the user community. These are not inherently a part of the shell, and
some may not be available in every zsh installation. The most signifi‐
cant of these are documented here. For documentation on other contrib‐
uted items such as shell functions, look for comments in the function
source files.
UTILITIES
Accessing On-Line Help
The key sequence ESC h is normally bound by ZLE to execute the run-help
widget (see zshzle(1)). This invokes the run-help command with the
command word from the current input line as its argument. By default,
run-help is an alias for the man command, so this often fails when the
command word is a shell builtin or a user-defined function. By
redefining the run-help alias, one can improve the on-line help pro‐
vided by the shell.
The helpfiles utility, found in the Util directory of the distribution,
is a Perl program that can be used to process the zsh manual to produce
a separate help file for each shell builtin and for many other shell
features as well. The autoloadable run-help function, found in Func‐
tions/Misc, searches for these helpfiles and performs several other
tests to produce the most complete help possible for the command.
There may already be a directory of help files on your system; look in
/usr/share/zsh or /usr/local/share/zsh and subdirectories below those,
or ask your system administrator.
To create your own help files with helpfiles, choose or create a direc‐
tory where the individual command help files will reside. For example,
you might choose ~/zsh_help. If you unpacked the zsh distribution in
your home directory, you would use the commands:
mkdir ~/zsh_help
cd ~/zsh_help
man zshall | colcrt - | \
perl ~/zsh-4.0.4/Util/helpfiles
Next, to use the run-help function, you need to add lines something
like the following to your .zshrc or equivalent startup file:
unalias run-help
autoload run-help
HELPDIR=~/zsh_help
The HELPDIR parameter tells run-help where to look for the help files.
If your system already has a help file directory installed, set HELPDIR
to the path of that directory instead.
Note that in order for `autoload run-help' to work, the run-help file
must be in one of the directories named in your fpath array (see zsh‐
param(1)). This should already be the case if you have a standard zsh
installation; if it is not, copy Functions/Misc/run-help to an appro‐
priate directory.
Recompiling Functions
If you frequently edit your zsh functions, or periodically update your
zsh installation to track the latest developments, you may find that
function digests compiled with the zcompile builtin are frequently out
of date with respect to the function source files. This is not usually
a problem, because zsh always looks for the newest file when loading a
function, but it may cause slower shell startup and function loading.
Also, if a digest file is explicitly used as an element of fpath, zsh
won't check whether any of its source files has changed.
The zrecompile autoloadable function, found in Functions/Misc, can be
used to keep function digests up to date.
zrecompile [ -qt ] [ name ... ]
zrecompile [ -qt ] -p args [ -- args ... ]
This tries to find *.zwc files and automatically re-compile them
if at least one of the original files is newer than the compiled
file. This works only if the names stored in the compiled files
are full paths or are relative to the directory that contains
the .zwc file.
In the first form, each name is the name of a compiled file or a
directory containing *.zwc files that should be checked. If no
arguments are given, the directories and *.zwc files in fpath
are used.
When -t is given, no compilation is performed, but a return sta‐
tus of zero (true) is set if there are files that need to be
re-compiled and non-zero (false) otherwise. The -q option qui‐
ets the chatty output that describes what zrecompile is doing.
Without the -t option, the return status is zero if all files
that needed re-compilation could be compiled and non-zero if
compilation for at least one of the files failed.
If the -p option is given, the args are interpreted as one or
more sets of arguments for zcompile, separated by `--'. For
example:
zrecompile -p \
-R ~/.zshrc -- \
-M ~/.zcompdump -- \
~/zsh/comp.zwc ~/zsh/Completion/*/_*
This compiles ~/.zshrc into ~/.zshrc.zwc if that doesn't exist
or if it is older than ~/.zshrc. The compiled file will be
marked for reading instead of mapping. The same is done for
~/.zcompdump and ~/.zcompdump.zwc, but this compiled file is
marked for mapping. The last line re-creates the file
~/zsh/comp.zwc if any of the files matching the given pattern is
newer than it.
Without the -p option, zrecompile does not create function
digests that do not already exist, nor does it add new functions
to the digest.
The following shell loop is an example of a method for creating func‐
tion digests for all functions in your fpath, assuming that you have
write permission to the directories:
for ((i=1; i <= $#fpath; ++i)); do
dir=$fpath[i]
zwc=${dir:t}.zwc
if [[ $dir == (.|..) || $dir == (.|..)/* ]]; then
continue
fi
files=($dir/*(N-.))
if [[ -w $dir:h && -n $files ]]; then
files=(${${(M)files%/*/*}#/})
if ( cd $dir:h &&
zrecompile -p -U -z $zwc $files ); then
fpath[i]=$fpath[i].zwc
fi
fi
done
The -U and -z options are appropriate for functions in the default zsh
installation fpath; you may need to use different options for your per‐
sonal function directories.
Once the digests have been created and your fpath modified to refer to
them, you can keep them up to date by running zrecompile with no argu‐
ments.
Keyboard Definition
The large number of possible combinations of keyboards, workstations,
terminals, emulators, and window systems makes it impossible for zsh to
have built-in key bindings for every situation. The zkbd utility,
found in Functions/Misc, can help you quickly create key bindings for
your configuration.
Run zkbd either as an autoloaded function, or as a shell script:
zsh -f ~/zsh-4.0.4/Functions/Misc/zkbd
When you run zkbd, it first asks you to enter your terminal type; if
the default it offers is correct, just press return. It then asks you
to press a number of different keys to determine characteristics of
your keyboard and terminal; zkbd warns you if it finds anything out of
the ordinary, such as a Delete key that sends neither ^H nor ^?.
The keystrokes read by zkbd are recorded as a definition for an asso‐
ciative array named key, written to a file in the subdirectory .zkbd
within either your HOME or ZDOTDIR directory. The name of the file is
composed from the TERM, VENDOR and OSTYPE parameters, joined by
hyphens.
You may read this file into your .zshrc or another startup file with
the "source" or "." commands, then reference the key parameter in bind‐
key commands, like this:
source ${ZDOTDIR:-$HOME}/.zkbd/$TERM-$VENDOR-$OSTYPE
[[ -n ${key[Left]} ]] && bindkey "${key[Left]}" backward-char
[[ -n ${key[Right]} ]] && bindkey "${key[Right]}" forward-char
# etc.
Note that in order for `autoload zkbd' to work, the zkdb file must be
in one of the directories named in your fpath array (see zshparam(1)).
This should already be the case if you have a standard zsh installa‐
tion; if it is not, copy Functions/Misc/zkbd to an appropriate direc‐
tory.
Dumping Shell State
Occasionally you may encounter what appears to be a bug in the shell,
particularly if you are using a beta version of zsh or a development
release. Usually it is sufficient to send a description of the problem
to one of the zsh mailing lists (see zsh(1)), but sometimes one of the
zsh developers will need to recreate your environment in order to track
the problem down.
The script named reporter, found in the Util directory of the distribu‐
tion, is provided for this purpose. (It is also possible to autoload
reporter, but reporter is not installed in fpath by default.) This
script outputs a detailed dump of the shell state, in the form of
another script that can be read with `zsh -f' to recreate that state.
To use reporter, read the script into your shell with the `.' command
and redirect the output into a file:
. ~/zsh-4.0.4/Util/reporter > zsh.report
You should check the zsh.report file for any sensitive information such
as passwords and delete them by hand before sending the script to the
developers. Also, as the output can be voluminous, it's best to wait
for the developers to ask for this information before sending it.
You can also use reporter to dump only a subset of the shell state.
This is sometimes useful for creating startup files for the first time.
Most of the output from reporter is far more detailed than usually is
necessary for a startup file, but the aliases, options, and zstyles
states may be useful because they include only changes from the
defaults. The bindings state may be useful if you have created any of
your own keymaps, because reporter arranges to dump the keymap creation
commands as well as the bindings for every keymap.
As is usual with automated tools, if you create a startup file with
reporter, you should edit the results to remove unnecessary commands.
Note that if you're using the new completion system, you should not
dump the functions state to your startup files with reporter; use the
compdump function instead (see zshcompsys(1)).
reporter [ state ... ]
Print to standard output the indicated subset of the current
shell state. The state arguments may be one or more of:
all Output everything listed below.
aliases
Output alias definitions.
bindings
Output ZLE key maps and bindings.
completion
Output old-style compctl commands. New completion is
covered by functions and zstyles.
functions
Output autoloads and function definitions.
limits Output limit commands.
options
Output setopt commands.
styles Same as zstyles.
variables
Output shell parameter assignments, plus export commands
for any environment variables.
zstyles
Output zstyle commands.
If the state is omitted, all is assumed.
With the exception of `all', every state can be abbreviated by any pre‐
fix, even a single letter; thus a is the same as aliases, z is the same
as zstyles, etc.
PROMPT THEMES
Installation
You should make sure all the functions from the Functions/Prompts
directory of the source distribution are available; they all begin with
the string `prompt_' except for the special function`promptinit'. You
also need the `colors' function from Functions/Misc. All of these
functions may already have been installed on your system; if not, you
will need to find them and copy them. The directory should appear as
one of the elements of the fpath array (this should already be the case
if they were installed), and at least the function promptinit should be
autoloaded; it will autoload the rest. Finally, to initialize the use
of the system you need to call the promptinit function. The following
code in your .zshrc will arrange for this; assume the functions are
stored in the directory ~/myfns:
fpath=(~/myfns $fpath)
autoload -U promptinit
promptinit
Theme Selection
Use the prompt command to select your preferred theme. This command
may be added to your .zshrc following the call to promptinit in order
to start zsh with a theme already selected.
prompt [ -c | -l ]
prompt [ -p | -h ] [ theme ... ]
prompt [ -s ] theme [ arg ... ]
Set or examine the prompt theme. With no options and a theme
argument, the theme with that name is set as the current theme.
The available themes are determined at run time; use the -l
option to see a list. The special theme `random' selects at
random one of the available themes and sets your prompt to that.
In some cases the theme may be modified by one or more argu‐
ments, which should be given after the theme name. See the help
for each theme for descriptions of these arguments.
Options are:
-c Show the currently selected theme and its parameters, if
any.
-l List all available prompt themes.
-p Preview the theme named by theme, or all themes if no
theme is given.
-h Show help for the theme named by theme, or for the prompt
function if no theme is given.
-s Set theme as the current theme and save state.
prompt_theme_setup
Each available theme has a setup function which is called by the
prompt function to install that theme. This function may define
other functions as necessary to maintain the prompt, including
functions used to preview the prompt or provide help for its
use. You should not normally call a theme's setup function
directly.
ZLE FUNCTIONS
Widgets
These functions all implement user-defined ZLE widgets (see zshzle(1))
which can be bound to keystrokes in interactive shells. To use them,
your .zshrc should contain lines of the form
autoload function
zle -N function
followed by an appropriate bindkey command to associate the function
with a key sequence. Suggested bindings are described below.
cycle-completion-positions
After inserting an unambiguous string into the command line, the
new function based completion system may know about multiple
places in this string where characters are missing or differ
from at least one of the possible matches. It will then place
the cursor on the position it considers to be the most interest‐
ing one, i.e. the one where one can disambiguate between as many
matches as possible with as little typing as possible.
This widget allows the cursor to be easily moved to the other
interesting spots. It can be invoked repeatedly to cycle
between all positions reported by the completion system.
edit-command-line
Edit the command line using your visual editor, as in ksh.
bindkey -M vicmd v edit-command-line
history-search-end
This function implements the widgets history-begin‐
ning-search-backward-end and history-beginning-search-for‐
ward-end. These commands work by first calling the correspond‐
ing builtin widget (see `History Control' in zshzle(1)) and then
moving the cursor to the end of the line. The original cursor
position is remembered and restored before calling the builtin
widget a second time, so that the same search is repeated to
look farther through the history.
Although you autoload only one function, the commands to use it
are slightly different because it implements two widgets.
zle -N history-beginning-search-backward-end \
history-search-end
zle -N history-beginning-search-forward-end \
history-search-end
bindkey '\e^P' history-beginning-search-backward-end
bindkey '\e^N' history-beginning-search-forward-end
incarg Typing the keystrokes for this widget with the cursor placed on
or to the left of an integer causes that integer to be incre‐
mented by one. With a numeric prefix argument, the number is
incremented by the amount of the argument (decremented if the
prefix argument is negative). The shell parameter incarg may be
set to change the default increment something other than one.
bindkey '^X+' incarg
incremental-complete-word
This allows incremental completion of a word. After starting
this command, a list of completion choices can be shown after
every character you type, which you can delete with ^H or DEL.
Pressing return accepts the completion so far and returns you to
normal editing (that is, the command line is not immediately
executed). You can hit TAB to do normal completion, ^G to abort
back to the state when you started, and ^D to list the matches.
This works only with the new function based completion system.
bindkey '^Xi' incremental-complete-word
insert-files
This function allows you type a file pattern, and see the
results of the expansion at each step. When you hit return, all
expansions are inserted into the command line.
bindkey '^Xf' insert-files
predict-on
This set of functions implements predictive typing using history
search. After predict-on, typing characters causes the editor
to look backward in the history for the first line beginning
with what you have typed so far. After predict-off, editing
returns to normal for the line found. In fact, you often don't
even need to use predict-off, because if the line doesn't match
something in the history, adding a key performs standard comple‐
tion, and then inserts itself if no completions were found.
However, editing in the middle of a line is liable to confuse
prediction; see the toggle style below.
With the function based completion system (which is needed for
this), you should be able to type TAB at almost any point to
advance the cursor to the next ``interesting'' character posi‐
tion (usually the end of the current word, but sometimes some‐
where in the middle of the word). And of course as soon as the
entire line is what you want, you can accept with return, with‐
out needing to move the cursor to the end first.
The first time predict-on is used, it creates several additional
widget functions:
delete-backward-and-predict
Replaces the backward-delete-char widget. You do not
need to bind this yourself.
insert-and-predict
Implements predictive typing by replacing the self-insert
widget. You do not need to bind this yourself.
predict-off
Turns off predictive typing.
Although you autoload only the predict-on function, it is neces‐
sary to create a keybinding for predict-off as well.
zle -N predict-on
zle -N predict-off
bindkey '^X^Z' predict-on
bindkey '^Z' predict-off
smart-insert-last-word
This function may replace the insert-last-word widget, like so:
zle -N insert-last-word smart-insert-last-word
With a numeric prefix, it behaves like insert-last-word, except
that words in comments are ignored when INTERACTIVE_COMMENTS is
set.
Otherwise, the rightmost ``interesting'' word from the previous
command is found and inserted. The default definition of
``interesting'' is that the word contains at least one alpha‐
betic character, slash, or backslash. This definition may be
overridden by use of the match style. The context used to look
up the style is the widget name, so usually the context is
:insert-last-word. However, you can bind this function to dif‐
ferent widgets to use different patterns:
zle -N insert-last-assignment smart-insert-last-word
zstyle :insert-last-assignment match '[[:alpha:]][][[:alnum:]]#=*'
bindkey '\e=' insert-last-assignment
Styles
The behavior of several of the above widgets can be controlled by the
use of the zstyle mechanism. In particular, widgets that interact with
the completion system pass along their context to any completions that
they invoke.
break-keys
This style is used by the incremental-complete-word widget. Its
value should be a pattern, and all keys matching this pattern
will cause the widget to stop incremental completion without the
key having any further effect. Like all styles used directly by
incremental-complete-word, this style is looked up using the
context `:incremental'.
completer
The incremental-complete-word and insert-and-predict widgets set
up their top-level context name before calling completion. This
allows one to define different sets of completer functions for
normal completion and for these widgets. For example, to use
completion, approximation and correction for normal completion,
completion and correction for incremental completion and only
completion for prediction one could use:
zstyle ':completion:*' completer \
_complete _correct _approximate
zstyle ':completion:incremental:*' completer \
_complete _correct
zstyle ':completion:predict:*' completer \
_complete
It is a good idea to restrict the completers used in prediction,
because they may be automatically invoked as you type. The
_list and _menu completers should never be used with prediction.
The _approximate, _correct, _expand, and _match completers may
be used, but be aware that they may change characters anywhere
in the word behind the cursor, so you need to watch carefully
that the result is what you intended.
cursor The insert-and-predict widget uses this style, in the context
`:predict', to decide where to place the cursor after completion
has been tried. Values are:
complete
The cursor is left where it was when completion finished,
but only if it is after a character equal to the one just
inserted by the user. If it is after another character,
this value is the same as `key'.
key The cursor is left after the nth occurrence of the char‐
acter just inserted, where n is the number of times that
character appeared in the word before completion was
attempted. In short, this has the effect of leaving the
cursor after the character just typed even if the comple‐
tion code found out that no other characters need to be
inserted at that position.
Any other value for this style unconditionally leaves the cursor
at the position where the completion code left it.
list When using the incremental-complete-word widget, this style says
if the matches should be listed on every key press (if they fit
on the screen). Use the context prefix `:completion:incremen‐
tal'.
The insert-and-predict widget uses this style to decide if the
completion should be shown even if there is only one possible
completion. This is done if the value of this style is the
string always. In this case the context is `:predict' (not
`:completion:predict').
match This style is used by smart-insert-last-word to provide a pat‐
tern (using full EXTENDED_GLOB syntax) that matches an interest‐
ing word. The context is the name of the widget to which
smart-insert-last-word is bound (see above). The default behav‐
ior of smart-insert-last-word is equivalent to:
zstyle :insert-last-word match '*[[:alpha:]/\\]*'
However, you might want to include words that contain spaces:
zstyle :insert-last-word match '*[[:alpha:][:space:]/\\]*'
Or include numbers as long as the word is at least two charac‐
ters long:
zstyle :insert-last-word match '*([[:digit:]]?|[[:alpha:]/\\])*'
The above example causes redirections like "2>" to be included.
prompt The incremental-complete-word widget shows the value of this
style in the status line during incremental completion. The
string value may contain any of the following substrings in the
manner of the PS1 and other prompt parameters:
%c Replaced by the name of the completer function that gen‐
erated the matches (without the leading underscore).
%l When the list style is set, replaced by `...' if the list
of matches is too long to fit on the screen and with an
empty string otherwise. If the list style is `false' or
not set, `%l' is always removed.
%n Replaced by the number of matches generated.
%s Replaced by `-no match-', `-no prefix-', or an empty
string if there is no completion matching the word on the
line, if the matches have no common prefix different from
the word on the line, or if there is such a common pre‐
fix, respectively.
%u Replaced by the unambiguous part of all matches, if there
is any, and if it is different from the word on the line.
Like `break-keys', this uses the `:incremental' context.
stop-keys
This style is used by the incremental-complete-word widget. Its
value is treated similarly to the one for the break-keys style
(and uses the same context: `:incremental'). However, in this
case all keys matching the pattern given as its value will stop
incremental completion and will then execute their usual func‐
tion.
toggle This boolean style is used by predict-on and its related widgets
in the context `:predict'. If set to one of the standard `true'
values, predictive typing is automatically toggled off in situa‐
tions where it is unlikely to be useful, such as when editing a
multi-line buffer or after moving into the middle of a line and
then deleting a character. The default is to leave prediction
turned on until an explicit call to predict-off.
verbose
This boolean style is used by predict-on and its related widgets
in the context `:predict'. If set to one of the standard `true'
values, these widgets display a message below the prompt when
the predictive state is toggled. This is most useful in combi‐
nation with the toggle style. The default does not display
these messages.
OTHER FUNCTIONS
There are a large number of helpful functions in the Functions/Misc
directory of the zsh distribution. Most are very simple and do not
require documentation here, but a few are worthy of special mention.
Descriptions
colors This function initializes several associative arrays to map
color names to (and from) the ANSI standard eight-color terminal
codes. These are used by the prompt theme system (see above).
You seldom should need to run colors more than once.
The eight base colors are: black, red, green, yellow, blue,
magenta, cyan, and white. Each of these has codes for fore‐
ground and background. In addition there are eight intensity
attributes: bold, faint, standout, underline, blink, reverse,
and conceal. Finally, there are six codes used to negate
attributes: none (reset all attributes to the defaults), normal
(neither bold nor faint), no-standout, no-underline, no-blink,
and no-reverse.
Some terminals do not support all combinations of colors and
intensities.
The associative arrays are:
color
colour Map all the color names to their integer codes, and inte‐
ger codes to the color names. The eight base names map
to the foreground color codes, as do names prefixed with
`fg-', such as `fg-red'. Names prefixed with `bg-', such
as `bg-blue', refer to the background codes. The reverse
mapping from code to color yields base name for fore‐
ground codes and the bg- form for backgrounds.
Although it is a misnomer to call them `colors', these
arrays also map the other fourteen attributes from names
to codes and codes to names.
fg
fg_bold
fg_no_bold
Map the eight basic color names to ANSI terminal escape
sequences that set the corresponding foreground text
properties. The fg sequences change the color without
changing the eight intensity attributes.
bg
bg_bold
bg_no_bold
Map the eight basic color names to ANSI terminal escape
sequences that set the corresponding background proper‐
ties. The bg sequences change the color without changing
the eight intensity attributes.
In addition, the scalar parameters reset_color and bold_color
are set to the ANSI terminal escapes that turn off all
attributes and turn on bold intensity, respectively.
fned name
Same as zed -f. This function does not appear in the zsh dis‐
tribution, but can be created by linking zed to the name fned in
some directory in your fpath.
is-at-least needed [ present ]
Perform a greater-than-or-equal-to comparison of two strings
having the format of a zsh version number; that is, a string of
numbers and text with segments separated by dots or dashes. If
the present string is not provided, $ZSH_VERSION is used. Seg‐
ments are paired left-to-right in the two strings with leading
non-number parts ignored. If one string has fewer segments than
the other, the missing segments are considered zero.
This is useful in startup files to set options and other state
that are not available in all versions of zsh.
is-at-least 3.1.6-15 && setopt NO_GLOBAL_RCS
is-at-least 3.1.0 && setopt HIST_REDUCE_BLANKS
is-at-least 2.6-17 || print "You can't use is-at-least here."
nslookup [ arg ... ]
This wrapper function for the nslookup command requires the
zsh/zpty module (see zshmodules(1)). It behaves exactly like
the standard nslookup except that it provides customizable
prompts (including a right-side prompt) and completion of
nslookup commands, host names, etc. (if you use the func‐
tion-based completion system). Completion styles may be set
with the context prefix `:completion:nslookup'.
See also the pager, prompt and rprompt styles below.
run-help
See `Accessing On-Line Help' above.
zed [ -f ] name
This function uses the ZLE editor to edit a file or function.
It rebinds the return key to insert a line break, and adds bind‐
ings for `^X^W' in the emacs keymap and `ZZ' in the vicmd keymap
to accept (and therefore write, in the case of a file) the
edited file or function. Keybindings are otherwise the standard
ones; completion is available, and styles may be set with the
context prefix `:completion:zed'.
Only one name argument is recognized (additional arguments are
ignored). If the -f option is given, the name is taken to be
that of a function; if the function is marked for autoloading,
zed searches for it in the fpath and loads it. Note that func‐
tions edited this way are installed into the current shell, but
not written back to the autoload file.
Without -f, name is the path name of the file to edit, which
need not exist; it is created on write, if necessary.
zcp [ -finqQvw ] srcpat dest
zln [ -finqQsvw ] srcpat dest
Same as zmv -C and zmv -L, respectively. These functions do not
appear in the zsh distribution, but can be created by linking
zmv to the names zcp and zln in some directory in your fpath.
zkbd See `Keyboard Definition' above.
zmv [ -finqQsvw ] [ -C | -L | -M | -p program ] [ -o optstring ] srcpat
dest
Move (usually, rename) files matching the pattern srcpat to cor‐
responding files having names of the form given by dest, where
srcpat contains parentheses surrounding patterns which will be
replaced in turn by $1, $2, ... in dest. For example,
zmv '(*).lis' '$1.txt'
renames `foo.lis' to `foo.txt', `my.old.stuff.lis' to
`my.old.stuff.txt', and so on.
The pattern is always treated as an EXTENDED_GLOB pattern. Any
file whose name is not changed by the substitution is simply
ignored. Any error (a substitution resulted in an empty string,
two substitutions gave the same result, the destination was an
existing regular file and -f was not given) causes the entire
function to abort without doing anything.
Options:
-f Force overwriting of destination files. Not currently
passed down to the mv/cp/ln command due to vagaries of
implementations (but you can use -o-f to do that).
-i Interactive: show each line to be executed and ask the
user whether to execute it. `Y' or `y' will execute it,
anything else will skip it. Note that you just need to
type one character.
-n No execution: print what would happen, but don't do it.
-q Turn bare glob qualifiers off: now assumed by default, so
this has no effect.
-Q Force bare glob qualifiers on. Don't turn this on unless
you are actually using glob qualifiers in a pattern.
-s Symbolic, passed down to ln; only works with -L.
-v Verbose: print each command as it's being executed.
-w Pick out wildcard parts of the pattern, as described
above, and implicitly add parentheses for referring to
them.
-C
-L
-M Force cp, ln or mv, respectively, regardless of the name
of the function.
-p program
Call program instead of cp, ln or mv. Whatever it does,
it should at least understand the form `program -- old‐
name newname' where oldname and newname are filenames
generated by zmv.
-o optstring
The optstring is split into words and passed down verba‐
tim to the cp, ln or mv command called to perform the
work. It should probably begin with a `-'.
For more complete examples and other implementation details, see
the zmv source file, usually located in one of the directories
named in your fpath, or in Functions/Misc/zmv in the zsh distri‐
bution.
zrecompile
See `Recompiling Functions' above.
zstyle+ context style value [ + subcontext style value ... ]
This makes defining styles a bit simpler by using a single `+'
as a special token that allows you to append a context name to
the previously used context name. Like this:
zstyle+ ':foo:bar' style1 value1 \
+ ':baz' style2 value2 \
+ ':frob' style3 value3
This defines `style1' with `value1' for the context :foo:bar as
usual, but it also defines `style2' with `value2' for the con‐
text :foo:bar:baz and `style3' with `value3' for :foo:bar:frob.
Any subcontext may be the empty string to re-use the first con‐
text unchanged.
Styles
insert-tab
The zed function sets this style in context `:completion:zed:*'
to turn off completion when TAB is typed at the beginning of a
line. You may override this by setting your own value for this
context and style.
pager The nslookup function looks up this style in the context
`:nslookup' to determine the program used to display output that
does not fit on a single screen.
prompt
rprompt
The nslookup function looks up this style in the context
`:nslookup' to set the prompt and the right-side prompt, respec‐
tively. The usual expansions for the PS1 and RPS1 parameters
may be used (see zshmisc(1)).
ZSHALL(1)ZSHALL(1)FILES
$ZDOTDIR/.zshenv
$ZDOTDIR/.zprofile
$ZDOTDIR/.zshrc
$ZDOTDIR/.zlogin
$ZDOTDIR/.zlogout
${TMPPREFIX}* (default is /tmp/zsh*)
/etc/zshenv
/etc/zprofile
/etc/zshrc
/etc/zlogin
/etc/zlogout (installation-specific - /etc is the default)
SEE ALSOsh(1), csh(1), tcsh(1), rc(1), bash(1), ksh(1)
IEEE Standard for information Technology - Portable Operating System
Interface (POSIX) - Part 2: Shell and Utilities, IEEE Inc, 1993, ISBN
1-55937-255-9.
zsh 4.0.4 October 26, 2001 ZSHALL(1)