tavor(7D) Devices tavor(7D)NAMEtavor - InfiniHost MT23108/MT25208 InfiniBand (IB) Driver
SYNOPSIS
PCI pci15b3,5a44@pci-slot, pci15b3,5a45@pci-slot
PCI-E pci15b3,6278@pci-e-slot, pci15b3,6279@pci-e-slot
DESCRIPTION
The tavor driver is an IB Architecture-compliant implementation of an
HCA, which operates on the Mellanox MT23108 InfiniBand ASSP and the
Mellanox MT25208 InfiniBand ASSP. These ASSP's support the link and
physical layers of the InfiniBand specification, while the ASSP and the
driver support the transport layer.
The tavor driver interfaces with the InfiniBand Transport Framework
(IBTF) and provides an implementation of the Channel Interfaces that
are defined by that framework. It also enables management applications
and agents to access the IB fabric.
FILES
/kernel/drv/tavor
32-bit ELF kernel module (x86 platform only).
/kernel/drv/amd64/tavor
64-bit ELF kernel module (x86 platform only).
/kernel/drv/sparcv9/tavor
64-bit ELF Kernel Module (SPARC platform only).
/kernel/drv/tavor.conf
Driver configuration file.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Architecture │PCI-based systems │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWtavor │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOdriver.conf(4), printers.conf(4), attributes(5)
Writing Device Drivers
DIAGNOSTICS
In addition to being logged, the following messages may appear on the
system console.
tavor : driver attached for maintenance mode only.
There was a failure in the boot process of the tavor ASSP and the
only function that can be performed is to re-flash firmware on the
ASSP.
driver failed to attach.
The ASSP could not boot into either operational (HCA) mode or into
maintenance mode. The device in inoperable.
Unexpected port number in port state change event.
A port state change event occurred, but the port number in the mes‐
sage does not exist on this HCA. This message also indicates the
port number that was in the port state change.
Tavor driver successfully detached.
The driver has been removed from the system, and the HCA is no
longer available for transfer operations.
tavor"n": port "m" up.
A port up asynchronous event has occured. "n" represents the
instance of the Tavor device number, and "m" represents the port
number on the Tavor device.
tavor"n": port "m" down.
A port down aynchronous event has occurred.
Tavor: <command name> command failed.
A internal firmware command failed to execute.
SunOS 5.10 11 Feb 2005 tavor(7D)