AVR(1)AVR(1)NAMEavr - Atmel AVR support
SYNOPSIS
avr/burn [-e] [-r] [ -d device ] file.srec
DESCRIPTION
Currently there is just one Inferno application to support Atmel AVRs
but others should appear.
Burn initialises or verifies the contents of an Atmel ATmega128 AVR.
The programming board must be connected to a serial port (see eia(3)),
/dev/eia0 by default. File.srec is a file containing the desired flash
contents in Motorola S-record format, as produced by ms2(10.1). By
default, burn erases the AVR chip (both flash and EEPROM), then loads
the flash with the contents of file.srec. The -e option stops burn
from erasing first, allowing additional code or data to be loaded (but
only into an already-erased region). If the -r option is given, burn
instead compares the contents of the AVR with the data in file.srec.
Burn supports the MIB510 programming board from Crossbow Technology
Inc.
SOURCE
/appl/cmd/avr/burn.b
SEE ALSOeia(3), ms2(10.1)
AVR(1)