isl(1M)isl(1M)NAMEisl - initial system loader
DESCRIPTION
implements the operating system independent portion of the bootstrap
process. It is loaded and executed after self-test and initialization
have completed successfully.
The processor contains special purpose memory for maintaining critical
configuration related parameters (e.g. Primary Boot, Alternate Boot,
and Console Paths). Two forms of memory are supported: Stable Storage
and Non-Volatile Memory (NVM).
Typically, when control is transferred to an sequence takes place. An
sequence allows a complete bootstrap operation to occur with no inter‐
vention from an operator. executes commands from the file in a script-
like fashion. is enabled by a flag in Stable Storage.
is a mechanism that automatically locates the boot and console devices.
For further information, see pdc(1M).
During an sequence, displays its revision and the name of any utility
it executes. However, if is disabled, after displays its revision, it
then prompts for input from the console device. Acceptable input is
any command name or the name of any utility available on the system.
If a non-fatal error occurs or the executed utility returns, again
prompts for input.
Commands
There are several commands available in although not all commads are
supported on cellular systems . The following is a list with a short
description. Parameters may be entered on the command line following
the command name. They must be separated by spaces. prompts for any
necessary parameters that are not entered on the command line.
Help - List commands and available utilities
List available utilities
Enable or disable the
autoboot sequence
Parameter - or
Enable or disable the
sequence
Parameter - or
Modify the Primary Boot Path
Parameter - Primary Boot Path in decimal
Modify the Alternate Boot Path
Parameter - Alternate Boot Path in decimal
Modify the Console Path
Parameter - Console Path in decimal
List contents of the
file
Display the Primary Boot, Alternate Boot, and Console Paths
Display the contents of one word of NVM in hexadecimal
Parameter - NVM address in decimal or standard
hexadecimal notation
Display the contents of one word of Stable Storage in hexadeci‐
mal
Parameter - Stable Storage address in decimal or
standard hexadecimal notation
DIAGNOSTICS
displays diagnostic information through error messages written on the
console and display codes on the LED display.
For the display codes, are informative only. and indicate errors, some
of which are fatal and cause the system to halt. Other errors merely
cause to display a message.
Non-fatal errors during an sequence cause the sequence to be aborted
and to prompt for input. After non-fatal errors during an interactive
session, merely prompts for input.
Fatal errors cause the system to halt. The problem must be corrected
and the system RESET to recover.
is executing.
is from the file.
Cannot find an
file. aborted.
No console found,
can only
Directory of utilities is too big,
reads only 2K bytes.
file is inconsistent.
aborted.
Utility file header inconsistent: SOM values invalid.
file input string exceeds 2048 characters.
aborted.
command or utility name exceeds 10 characters.
has transferred control to the utility.
Internal inconsistency: Volume label -
Internal inconsistency: Directory -
Error reading
file.
Error reading from console -
Error writing to console -
Not an command or utility.
Utility file header inconsistent: Invalid System ID.
Error reading utility file header.
Utility file header inconsistent: Bad magic number.
Utility would overlay
in memory.
Utility requires more memory than is configured.
Error reading utility into memory.
Incorrect checksum: Reading utility into memory.
Console needed -
Internal inconsistency: Boot device class -
Destination memory address of utility is invalid.
Utility file header inconsistent:
pdc_cache entry.
Internal inconsistency:
iodc_entry_init -
Internal inconsistency:
iodc_entry_init - console -
Internal inconsistency:
iodc_entry_init - boot device -
Utility file header inconsistent: Bad
aux_id.
Bad utility file type.
SEE ALSOboot(1M), pdc(1M).
PA-RISC Systems Only isl(1M)