EDITLINE(3) BSD Library Functions Manual EDITLINE(3)NAME
editline, el_init, el_end, el_reset, el_gets, el_getc, el_push, el_parse,
el_set, el_get, el_source, el_resize, el_line, el_insertstr,
el_deletestr, history_init, history_end, history, tok_init, tok_end,
tok_reset, tok_line, tok_str — line editor, history and tokenization
functions
LIBRARY
Command Line Editor Library (libedit, -ledit)
SYNOPSIS
#include <histedit.h>
EditLine *
el_init(const char *prog, FILE *fin, FILE *fout, FILE *ferr);
void
el_end(EditLine *e);
void
el_reset(EditLine *e);
const char *
el_gets(EditLine *e, int *count);
int
el_getc(EditLine *e, char *ch);
void
el_push(EditLine *e, char *str);
int
el_parse(EditLine *e, int argc, const char *argv[]);
int
el_set(EditLine *e, int op, ...);
int
el_get(EditLine *e, int op, ...);
int
el_source(EditLine *e, const char *file);
void
el_resize(EditLine *e);
const LineInfo *
el_line(EditLine *e);
int
el_insertstr(EditLine *e, const char *str);
void
el_deletestr(EditLine *e, int count);
History *
history_init();
void
history_end(History *h);
int
history(History *h, HistEvent *ev, int op, ...);
Tokenizer *
tok_init(const char *IFS);
void
tok_end(Tokenizer *t);
void
tok_reset(Tokenizer *t);
int
tok_line(Tokenizer *t, const LineInfo *li, int *argc,
const char **argv[], int *cursorc, int *cursoro);
int
tok_str(Tokenizer *t, const char *str, int *argc, const char **argv[]);
DESCRIPTION
The editline library provides generic line editing, history and tokeniza‐
tion functions, similar to those found in sh(1).
These functions are available in the libedit library (which needs the
libtermcap library). Programs should be linked with -ledit -ltermcap.
LINE EDITING FUNCTIONS
The line editing functions use a common data structure, EditLine, which
is created by el_init() and freed by el_end().
The following functions are available:
el_init()
Initialise the line editor, and return a data structure to be used
by all other line editing functions. prog is the name of the
invoking program, used when reading the editrc(5) file to determine
which settings to use. fin, fout and ferr are the input, output,
and error streams (respectively) to use. In this documentation,
references to “the tty” are actually to this input/output stream
combination.
el_end()
Clean up and finish with e, assumed to have been created with
el_init().
el_reset()
Reset the tty and the parser. This should be called after an error
which may have upset the tty's state.
el_gets()
Read a line from the tty. count is modified to contain the number
of characters read. Returns the line read if successful, or NULL
if no characters were read or if an error occurred.
el_getc()
Read a character from the tty. ch is modified to contain the char‐
acter read. Returns the number of characters read if successful,
-1 otherwise.
el_push()
Pushes str back onto the input stream. This is used by the macro
expansion mechanism. Refer to the description of bind -s in
editrc(5) for more information.
el_parse()
Parses the argv array (which is argc elements in size) to execute
builtin editline commands. If the command is prefixed with “prog:”
then el_parse() will only execute the command if “prog” matches the
prog argument supplied to el_init(). The return value is -1 if the
command is unknown, 0 if there was no error or “prog” did not
match, or 1 if the command returned an error. Refer to editrc(5)
for more information.
el_set()
Set editline parameters. op determines which parameter to set, and
each operation has its own parameter list.
The following values for op are supported, along with the required
argument list:
EL_PROMPT, char *(*f)(EditLine *)
Define prompt printing function as f, which is to return a
string that contains the prompt.
EL_RPROMPT, char *(*f)(EditLine *)
Define right side prompt printing function as f, which is to
return a string that contains the prompt.
EL_TERMINAL, const char *type
Define terminal type of the tty to be type, or to TERM if
type is NULL.
EL_EDITOR, const char *mode
Set editing mode to mode, which must be one of “emacs” or
“vi”.
EL_SIGNAL, int flag
If flag is non-zero, editline will install its own signal
handler for the following signals when reading command input:
SIGCONT, SIGHUP, SIGINT, SIGQUIT, SIGSTOP, SIGTERM, SIGTSTP,
and SIGWINCH. Otherwise, the current signal handlers will be
used.
EL_BIND, const char *, ..., NULL
Perform the bind builtin command. Refer to editrc(5) for
more information.
EL_ECHOTC, const char *, ..., NULL
Perform the echotc builtin command. Refer to editrc(5) for
more information.
EL_SETTC, const char *, ..., NULL
Perform the settc builtin command. Refer to editrc(5) for
more information.
EL_SETTY, const char *, ..., NULL
Perform the setty builtin command. Refer to editrc(5) for
more information.
EL_TELLTC, const char *, ..., NULL
Perform the telltc builtin command. Refer to editrc(5) for
more information.
EL_ADDFN, const char *name, const char *help, unsigned char
(*func)(EditLine *e, int ch)
Add a user defined function, func(), referred to as name
which is invoked when a key which is bound to name is
entered. help is a description of name. At invocation time,
ch is the key which caused the invocation. The return value
of func() should be one of:
CC_NORM Add a normal character.
CC_NEWLINE End of line was entered.
CC_EOF EOF was entered.
CC_ARGHACK Expecting further command input as arguments,
do nothing visually.
CC_REFRESH Refresh display.
CC_REFRESH_BEEP
Refresh display, and beep.
CC_CURSOR Cursor moved, so update and perform CC_REFRESH.
CC_REDISPLAY Redisplay entire input line. This is useful if
a key binding outputs extra information.
CC_ERROR An error occurred. Beep, and flush tty.
CC_FATAL Fatal error, reset tty to known state.
EL_HIST, History *(*func)(History *, int op, ...), const char *ptr
Defines which history function to use, which is usually
history(). ptr should be the value returned by
history_init().
EL_EDITMODE, int flag
If flag is non-zero, editing is enabled (the default). Note
that this is only an indication, and does not affect the
operation of editline. At this time, it is the caller's
responsibility to check this (using el_get()) to determine if
editing should be enabled or not.
EL_GETCFN, int (*f)(EditLine *, char *c)
Define the character reading function as f, which is to
return the number of characters read and store them in c.
This function is called internally by el_gets() and
el_getc(). The builtin function can be set or restored with
the special function name EL_BUILTIN_GETCFN.
EL_CLIENTDATA, void *data
Register data to be associated with this EditLine structure.
It can be retrieved with the corresponding el_get() call.
EL_SETFP, int fd, FILE *fp
Set the current editline file pointer for “input” fd = 0,
“output” fd = 1, or “error” fd = 2 from fp.
el_get()
Get editline parameters. op determines which parameter to retrieve
into result. Returns 0 if successful, -1 otherwise.
The following values for op are supported, along with actual type
of result:
EL_PROMPT, char *(*f)(EditLine *)
Return a pointer to the function that displays the prompt.
EL_RPROMPT, char *(*f)(EditLine *)
Return a pointer to the function that displays the rightside
prompt.
EL_EDITOR, const char *
Return the name of the editor, which will be one of “emacs”
or “vi”.
EL_GETTC, const char *name, void *value
Return non-zero if name is a valid termcap(5) capability and
set value to the current value of that capability.
EL_SIGNAL, int *
Return non-zero if editline has installed private signal han‐
dlers (see el_get() above).
EL_EDITMODE, int *
Return non-zero if editing is enabled.
EL_GETCFN, int (**f)(EditLine *, char *)
Return a pointer to the function that read characters, which
is equal to EL_BUILTIN_GETCFN in the case of the default
builtin function.
EL_CLIENTDATA, void **data
Retrieve data previously registered with the corresponding
el_set() call.
EL_UNBUFFERED, int
Sets or clears unbuffered mode. In this mode, el_gets() will
return immediately after processing a single character.
EL_PREP_TERM, int
Sets or clears terminal editing mode.
EL_GETFP, int fd, FILE **fp
Return in fp the current editline file pointer for “input” fd
= 0, “output” fd = 1, or “error” fd = 2.
el_source()
Initialise editline by reading the contents of file. el_parse() is
called for each line in file. If file is NULL, try $PWD/.editrc
then $HOME/.editrc. Refer to editrc(5) for details on the format
of file.
el_resize()
Must be called if the terminal size changes. If EL_SIGNAL has been
set with el_set(), then this is done automatically. Otherwise, it
is the responsibility of the application to call el_resize() on the
appropriate occasions.
el_line()
Return the editing information for the current line in a LineInfo
structure, which is defined as follows:
typedef struct lineinfo {
const char *buffer; /* address of buffer */
const char *cursor; /* address of cursor */
const char *lastchar; /* address of last character */
} LineInfo;
buffer is not NUL terminated. This function may be called after
el_gets() to obtain the LineInfo structure pertaining to line
returned by that function, and from within user defined functions
added with EL_ADDFN.
el_insertstr()
Insert str into the line at the cursor. Returns -1 if str is empty
or will not fit, and 0 otherwise.
el_deletestr()
Delete count characters before the cursor.
HISTORY LIST FUNCTIONS
The history functions use a common data structure, History, which is cre‐
ated by history_init() and freed by history_end().
The following functions are available:
history_init()
Initialise the history list, and return a data structure to be used
by all other history list functions.
history_end()
Clean up and finish with h, assumed to have been created with
history_init().
history()
Perform operation op on the history list, with optional arguments
as needed by the operation. ev is changed accordingly to opera‐
tion. The following values for op are supported, along with the
required argument list:
H_SETSIZE, int size
Set size of history to size elements.
H_GETSIZE
Get number of events currently in history.
H_END
Cleans up and finishes with h, assumed to be created with
history_init().
H_CLEAR
Clear the history.
H_FUNC, void *ptr, history_gfun_t first, history_gfun_t next,
history_gfun_t last, history_gfun_t prev, history_gfun_t
curr, history_sfun_t set, history_vfun_t clear,
history_efun_t enter, history_efun_t add
Define functions to perform various history operations. ptr
is the argument given to a function when it is invoked.
H_FIRST
Return the first element in the history.
H_LAST
Return the last element in the history.
H_PREV
Return the previous element in the history.
H_NEXT
Return the next element in the history.
H_CURR
Return the current element in the history.
H_SET
Set the cursor to point to the requested element.
H_ADD, const char *str
Append str to the current element of the history, or perform
the H_ENTER operation with argument str if there is no cur‐
rent element.
H_APPEND, const char *str
Append str to the last new element of the history.
H_ENTER, const char *str
Add str as a new element to the history, and, if necessary,
removing the oldest entry to keep the list to the created
size. If H_SETUNIQUE was has been called with a non-zero
arguments, the element will not be entered into the history
if its contents match the ones of the current history ele‐
ment. If the element is entered history() returns 1, if it
is ignored as a duplicate returns 0. Finally history()
returns -1 if an error occurred.
H_PREV_STR, const char *str
Return the closest previous event that starts with str.
H_NEXT_STR, const char *str
Return the closest next event that starts with str.
H_PREV_EVENT, int e
Return the previous event numbered e.
H_NEXT_EVENT, int e
Return the next event numbered e.
H_LOAD, const char *file
Load the history list stored in file.
H_SAVE, const char *file
Save the history list to file.
H_SETUNIQUE, int unique
Set flag that adjacent identical event strings should not be
entered into the history.
H_GETUNIQUE
Retrieve the current setting if adjacent identical elements
should be entered into the history.
H_DEL, int e
Delete the event numbered e. This function is only provided
for readline(3) compatibility. The caller is responsible for
free'ing the string in the returned HistEvent.
The history() function returns ≥ 0 if the operation op succeeds.
Otherwise, -1 is returned and ev is updated to contain more details
about the error.
TOKENIZATION FUNCTIONS
The tokenization functions use a common data structure, Tokenizer, which
is created by tok_init() and freed by tok_end().
The following functions are available:
tok_init()
Initialise the tokenizer, and return a data structure to be used by
all other tokenizer functions. IFS contains the Input Field Sepa‐
rators, which defaults to ⟨space⟩, ⟨tab⟩, and ⟨newline⟩ if NULL.
tok_end()
Clean up and finish with t, assumed to have been created with
tok_init().
tok_reset()
Reset the tokenizer state. Use after a line has been successfully
tokenized by tok_line() or tok_str() and before a new line is to be
tokenized.
tok_line()
Tokenize li, If successful, modify: argv to contain the words, argc
to contain the number of words, cursorc (if not NULL) to contain
the index of the word containing the cursor, and cursoro (if not
NULL) to contain the offset within argv[cursorc] of the cursor.
Returns 0 if successful, -1 for an internal error, 1 for an
unmatched single quote, 2 for an unmatched double quote, and 3 for
a backslash quoted ⟨newline⟩. A positive exit code indicates that
another line should be read and tokenization attempted again.
tok_str()
A simpler form of tok_line(); str is a NUL terminated string to
tokenize.
SEE ALSOsh(1), signal(3), termcap(3), editrc(5), termcap(5)HISTORY
The editline library first appeared in 4.4BSD. CC_REDISPLAY appeared in
NetBSD 1.3. CC_REFRESH_BEEP and EL_EDITMODE appeared in NetBSD 1.4.
EL_RPROMPT appeared in NetBSD 1.5.
AUTHORS
The editline library was written by Christos Zoulas. Luke Mewburn wrote
this manual and implemented CC_REDISPLAY, CC_REFRESH_BEEP, EL_EDITMODE,
and EL_RPROMPT.
BUGS
At this time, it is the responsibility of the caller to check the result
of the EL_EDITMODE operation of el_get() (after an el_source() or
el_parse()) to determine if editline should be used for further input.
I.e., EL_EDITMODE is purely an indication of the result of the most
recent editrc(5) edit command.
BSD January 12, 2007 BSD
