swapoff man page on ElementaryOS

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
ElementaryOS logo
[printable version]

SWAPON(8)		     System Administration		     SWAPON(8)

NAME
       swapon, swapoff - enable/disable devices and files for paging and swap‐
       ping

SYNOPSIS
       Get info:
	    swapon -s [-h] [-V]

       Enable/disable:
	    swapon [-d] [-f] [-p priority] [-v] specialfile...
	    swapoff [-v] specialfile...

       Enable/disable all:
	    swapon -a [-e] [-f] [-v]
	    swapoff -a [-v]

DESCRIPTION
       swapon is used to specify devices on which paging and swapping  are  to
       take place.

       The  device  or file used is given by the specialfile parameter. It may
       be of the form -L label or -U uuid to indicate a	 device	 by  label  or
       uuid.

       Calls  to  swapon  normally occur in the system boot scripts making all
       swap devices available, so that the paging  and	swapping  activity  is
       interleaved across several devices and files.

       swapoff disables swapping on the specified devices and files.  When the
       -a flag is given, swapping is disabled on all known  swap  devices  and
       files (as found in /proc/swaps or /etc/fstab).

       -a, --all
	      All devices marked as ``swap'' in /etc/fstab are made available,
	      except for those with the ``noauto'' option.  Devices  that  are
	      already being used as swap are silently skipped.

       -d, --discard
	      Discard  freed  swap  pages  before they are reused, if the swap
	      device supports the discard or trim operation.  This may improve
	      performance  on some Solid State Devices, but often it does not.
	      The /etc/fstab mount option discard may be also used  to	enable
	      discard flag.

       -e, --ifexists
	      Silently	skip  devices that do not exist.  The /etc/fstab mount
	      option nofail may be also used to skip non-existing device.

       -f, --fixpgsz
	      Reinitialize (exec /sbin/mkswap) the swap space if its page size
	      does   not  match	 that  of  the	the  current  running  kernel.
	      mkswap(2) initializes the whole device and does  not  check  for
	      bad blocks.

       -h, --help
	      Provide help.

       -L label
	      Use  the	partition  that	 has  the specified label.  (For this,
	      access to /proc/partitions is needed.)

       -p, --priority priority
	      Specify the priority of the swap device.	priority  is  a	 value
	      between  0  and  32767. Higher numbers indicate higher priority.
	      See swapon(2) for a full description  of	swap  priorities.  Add
	      pri=value	 to the option field of /etc/fstab for use with swapon
	      -a.

       -s, --summary
	      Display  swap  usage  summary  by	 device.  Equivalent  to  "cat
	      /proc/swaps".  Not available before Linux 2.1.25.

       -U uuid
	      Use the partition that has the specified uuid.

       -v, --verbose
	      Be verbose.

       -V, --version
	      Display version.

NOTES
       You  should not use swapon on a file with holes.	 Swap over NFS may not
       work.

       swapon automatically detects and rewrites swap space signature with old
       software	 suspend  data (e.g S1SUSPEND, S2SUSPEND, ...). The problem is
       that if we don't do it, then we get data corruption the	next  time  an
       attempt at unsuspending is made.

       swapon may not work correctly when using a swap file with some versions
       of btrfs.  This is due to the swap file implementation  in  the	kernel
       expecting  to be able to write to the file directly, without the assis‐
       tance of the file system.  Since btrfs is a copy-on-write file  system,
       the  file  location  may not be static and corruption can result. Btrfs
       actively disallows the use of files on its file systems by refusing  to
       map  the	 file. This can be seen in the system log as "swapon: swapfile
       has holes." One possible workaround is to map the file  to  a  loopback
       device.	This will allow the file system to determine the mapping prop‐
       erly but may come with a performance impact.

SEE ALSO
       swapon(2), swapoff(2), fstab(5), init(8), mkswap(8), rc(8), mount(8)

FILES
       /dev/sd??  standard paging devices
       /etc/fstab ascii filesystem description table

HISTORY
       The swapon command appeared in 4.0BSD.

AVAILABILITY
       The swapon command is part of the util-linux package and	 is  available
       from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.

util-linux			September 1995			     SWAPON(8)
[top]

List of man pages available for ElementaryOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net