setpci man page on ElementaryOS

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
ElementaryOS logo
[printable version]

setpci(8)		       The PCI Utilities		     setpci(8)

NAME
       setpci - configure PCI devices

SYNOPSIS
       setpci [options] devices operations...

DESCRIPTION
       setpci is a utility for querying and configuring PCI devices.

       All numbers are entered in hexadecimal notation.

       Root  privileges	 are  necessary	 for  almost all operations, excluding
       reads of the standard header of the configuration space on some operat‐
       ing systems.  Please see lspci(8) for details on access rights.

OPTIONS
   General options
       -v     Tells  setpci  to	 be  verbose  and display detailed information
	      about configuration space accesses.

       -f     Tells setpci not to complain when there's nothing to do (when no
	      devices  are  selected).	 This  option  is  intended for use in
	      widely-distributed configuration scripts	where  it's  uncertain
	      whether the device in question is present in the machine or not.

       -D     `Demo  mode' -- don't write anything to the configuration regis‐
	      ters.  It's useful to try setpci -vD to verify that your complex
	      sequence of setpci operations does what you think it should do.

       --version
	      Show setpci version. This option should be used stand-alone.

       --help Show  detailed  help on available options. This option should be
	      used stand-alone.

       --dumpregs
	      Show a list of all known PCI registers  and  capabilities.  This
	      option should be used stand-alone.

   PCI access options
       The  PCI	 utilities  use	 the  PCI  library to talk to PCI devices (see
       pcilib(7) for details). You can use the following options to  influence
       its behavior:

       -A <method>
	      The  library  supports  a	 variety  of methods to access the PCI
	      hardware.	 By default, it uses the first	access	method	avail‐
	      able, but you can use this option to override this decision. See
	      -A help for a list of available methods and their descriptions.

       -O <param>=<value>
	      The behavior of the  library  is	controlled  by	several	 named
	      parameters.   This  option allows to set the value of any of the
	      parameters. Use -O help for a list of known parameters and their
	      default values.

       -H1    Use  direct hardware access via Intel configuration mechanism 1.
	      (This is a shorthand for -A intel-conf1.)

       -H2    Use direct hardware access via Intel configuration mechanism  2.
	      (This is a shorthand for -A intel-conf2.)

       -G     Increase debug level of the library.

DEVICE SELECTION
       Before each sequence of operations you need to select which devices you
       wish that operation to affect.

       -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]
	      Consider only devices in the  specified  domain  (in  case  your
	      machine has several host bridges, they can either share a common
	      bus number space or each of them can address a PCI domain of its
	      own;  domains  are numbered from 0 to ffff), bus (0 to ff), slot
	      (0 to 1f) and function (0 to 7).	Each component of  the	device
	      address  can be omitted or set to "*", both meaning "any value".
	      All numbers are hexadecimal.  E.g., "0:" means  all  devices  on
	      bus  0,  "0"  means  all functions of device 0 on any bus, "0.3"
	      selects third function of device 0 on all buses and ".4" matches
	      only the fourth function of each device.

       -d [<vendor>]:[<device>]
	      Select  devices  with  specified vendor and device ID. Both ID's
	      are given in hexadecimal and may be omitted  or  given  as  "*",
	      both meaning "any value".

       When  -s and -d are combined, only devices that match both criteria are
       selected. When multiple options of the same  kind  are  specified,  the
       rightmost one overrides the others.

OPERATIONS
       There  are  two kinds of operations: reads and writes. To read a regis‐
       ter, just specify its name. Writes have	the  form  name=value,value...
       where  each  value  is  either a hexadecimal number or an expression of
       type data:mask where both data and mask are hexadecimal numbers. In the
       latter case, only the bits corresponding to binary ones in the mask are
       changed (technically, this is a read-modify-write operation).

       There are several ways how to identity a register:

       ·      Tell its address in hexadecimal.

       ·      Spell its name. Setpci knows the names of all registers  in  the
	      standard	configuration  headers. Use `setpci --dumpregs' to get
	      the complete list.  See PCI bus specifications for  the  precise
	      meaning	 of   these   registers	  or   consult	 header.h   or
	      /usr/include/pci/pci.h for a brief sketch.

       ·      If the register is a part of a PCI capability, you  can  specify
	      the  name of the capability to get the address of its first reg‐
	      ister. See the names starting with  `CAP_'  or  `ECAP_'  in  the
	      --dumpregs output.

       ·      If  the  name  of the capability is not known to setpci, you can
	      refer to it by its number in the form CAPid or ECAPid, where  id
	      is the numeric identifier of the capability in hexadecimal.

       ·      Each  of	the previous formats can be followed by +offset to add
	      an offset (a hex number) to the address.	This  feature  can  be
	      useful  for  addressing of registers living within a capability,
	      or to modify parts of standard registers.

       ·      Finally, you should append a width specifier .B, .W,  or	.L  to
	      choose  how  many	 bytes (1, 2, or 4) should be transferred. The
	      width can be omitted if you are referring to a register  by  its
	      name and the width of the register is well known.

       All names of registers and width specifiers are case-insensitive.

EXAMPLES
       COMMAND
	      asks for the word-sized command register.

       4.w    is a numeric address of the same register.

       COMMAND.l
	      asks  for	 a 32-bit word starting at the location of the command
	      register, i.e., the command and status registers together.

       VENDOR_ID+1.b
	      specifies the upper byte of the vendor  ID  register  (remember,
	      PCI is little-endian).

       CAP_PM+2.w
	      corresponds  to the second word of the power management capabil‐
	      ity.

       ECAP108.l
	      asks for the first 32-bit word of the extended  capability  with
	      ID 0x108.

SEE ALSO
       lspci(8), pcilib(7)

AUTHOR
       The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.

pciutils-3.2.1		       10 November 2013			     setpci(8)
[top]

List of man pages available for ElementaryOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net