L2TEST(1)L2TEST(1)NAMEl2test - L2CAP testing
SYNOPSISl2testDESCRIPTIONl2test is L2CAP testing program.
USAGEl2test <mode> [options] [bdaddr]
Modes:
-r listen and receive
-w listen and send
-d listen and dump incoming data
-x listen, then send, then dump incoming data
-s connect and send
-u connect and receive
-n connect and be silent
-y connect, then send, then dump incoming data
-c connect, disconnect, connect, ...
-m multiple connects
-p trigger dedicated bonding
-z information request
Options:
[-b bytes] [-i device] [-P psm] [-J cid]
[-I imtu] [-O omtu]
[-L seconds] enable SO_LINGER
[-W seconds] enable deferred setup
[-B filename] use data packets from file
[-N num] send num frames (default = infinite)
[-C num] send num frames before delay (default = 1)
[-D milliseconds] delay after sending num frames (default = 0)
[-X mode] select retransmission/flow-control mode
[-Q num] Max Transmit value (default = 3)
[-Z size] Transmission Window size (default = 63)
[-F fcs] use CRC16 check (default = 1)
[-R] reliable mode
[-G] use connectionless channel (datagram)
[-U] use sock stream
[-A] request authentication
[-E] request encryption
[-S] secure connection
[-M] become master
[-T] enable timestamps
AUTHOR
This manual page was written by Nobuhiro Iwamatsu <iwa‐
matsu@debian.org>, for the Debian GNU/Linux system (but may be used by
others).
January 2012 L2TEST(1)
