groff_font man page on BSDOS

Man page or keyword search:  
man Server   6284 pages
apropos Keyword Search (all sections)
Output format
BSDOS logo
[printable version]



GROFF_FONT(5)					    GROFF_FONT(5)

NAME
       groff_font  -  format of groff device and font description
       files

DESCRIPTION
       The groff font format is roughly a superset of the ditroff
       font  format.  Unlike the ditroff font format, there is no
       associated binary format.  The font files for device  name
       are stored in a directory devname.  There are two types of
       file: a device description file called DESC and	for  each
       font  F a font file called F.  These are text files; there
       is no associated binary format.

   DESC file format
       The DESC file can contain the following types of line:

       res n  There are n machine units per inch.

       hor n  The horizontal resolution is n machine units.

       vert n The vertical resolution is n machine units.

       sizescale n
	      The scale factor for pointsizes.	By  default  this
	      has a value of 1.	 One scaled point is equal to one
	      point/n.	The arguments to the unitwidth and  sizes
	      commands are given in scaled points.

       unitwidth n
	      Quantities  in  the font files are given in machine
	      units for	 fonts	whose  point  size  is	n  scaled
	      points.

       tcommand
	      This  means that the postprocessor can handle the t
	      and u output commands.

       sizes s1 s2...sn 0
	      This  means  that	 the  device  has  fonts  at  s1,
	      s2,...sn	scaled points.	The list of sizes must be
	      terminated by a 0.  Each si can also be a range  of
	      sizes  m-n.  The list can extend over more than one
	      line.

       styles S1 S2...Sm
	      The first m font positions will be associated  with
	      styles S1...Sm.

       fonts n F1 F2 F3...Fn
	      Fonts F1...Fn will be mounted in the font positions
	      m+1,...,m+n where m is the number of styles.   This
	      command may extend over more than one line.  A font
	      name of 0 will cause no font to be mounted  on  the
	      corresponding font position.

Groff Version 1.15	 5 December 1995			1

GROFF_FONT(5)					    GROFF_FONT(5)

       family fam
	      The default font family is fam.

       charset
	      This  line and everything following in the file are
	      ignored.	It is allowed for the sake  of	backwards
	      compatibility.

       The  res, unitwidth, fonts and sizes lines are compulsory.
       Other commands are ignored by troff but	may  be	 used  by
       postprocessors  to  store  arbitrary information about the
       device in the DESC file.

   Font file format
       A font file has two  sections.  The  first  section  is	a
       sequence	 of  lines  each  containing  a sequence of blank
       delimited words; the first word in the line is a key,  and
       subsequent words give a value for that key.

       name F The name of the font is F.

       spacewidth n
	      The normal width of a space is n.

       slant n
	      The  characters  of  the	font  have  a  slant of n
	      degrees. (Positive means forward.)

       ligatures lig1 lig2...lign [0]
	      Characters lig1, lig2,...,lign are ligatures;  pos-
	      sible  ligatures are ff, fi, fl and ffl.	For back-
	      wards compatibility, the list of ligatures  may  be
	      terminated with a 0.  The list of ligatures may not
	      extend over more than one line.

       special
	      The font is special; this means that when a charac-
	      ter is requested that is not present in the current
	      font, it will be searched for in any special  fonts
	      that are mounted.

       Other  commands	are  ignored  by troff but may be used by
       postprocessors to store arbitrary  information  about  the
       font in the font file.

       The  first  section  can contain comments which start with
       the # character and extend to the end of a line.

       The second section contains one or  two	subsections.   It
       must  contain a charset subsection and it may also contain
       a kernpairs subsection.	These subsections can  appear  in
       any  order.   Each subsection starts with a word on a line
       by itself.

Groff Version 1.15	 5 December 1995			2

GROFF_FONT(5)					    GROFF_FONT(5)

       The word	 charset  starts  the  charset	subsection.   The
       charset	line  is  followed  by a sequence of lines.  Each
       line gives information for one  character.   A  line  com-
       prises a number of fields separated by blanks or tabs. The
       format is

	      name metrics type code comment

       name identifies the character: if name is a single charac-
       ter  c then it corresponds to the groff input character c;
       if it is of the form \c where c	is  a  single  character,
       then  it corresponds to the groff input character \c; oth-
       erwise it corresponds to the groff input character \[name]
       (if  it	is exactly two characters xx it can be entered as
       \(xx.)  Groff supports eight bit characters; however  some
       utilities has difficulties with eight bit characters.  For
       this reason, there is a convention that the name charn  is
       equivalent  to the single character whose code is n .  For
       example, char163 would be equivalent to the character with
       code 163 which is the pounds sterling sign in ISO Latin-1.
       The name --- is special and indicates that  the	character
       is  unnamed;  such characters can only be used by means of
       the \N escape sequence in troff.

       The type field gives the character type:

       1      means the character has an descender, for	 example,
	      p;

       2      means  the  character has an ascender, for example,
	      b;

       3      means the character has  both  an	 ascender  and	a
	      descender, for example, (.

       The code field gives the code which the postprocessor uses
       to print the character.	The character can also	be  input
       to  groff  using	 this  code  by	 means	of  the \N escape
       sequence.  The code can be any integer.	If it starts with
       a  0 it will be interpreted as octal; if it starts with 0x
       or 0X it will be intepreted as hexadecimal.

       Anything on the line after the code field will be ignored.

       The metrics field has the form:

	      width[,height[,depth[,italic_correc-
	      tion[,left_italic_correction[,subscript_correc-
	      tion]]]]]

       There  must  not	 be  any  spaces between these subfields.
       Missing subfields are assumed to be 0.  The subfields  are
       all decimal integers.  Since there is no associated binary
       format, these values  are  not  required	 to  fit  into	a

Groff Version 1.15	 5 December 1995			3

GROFF_FONT(5)					    GROFF_FONT(5)

       variable	 of  type char as they are in ditroff.	The width
       subfields gives the width of the	 character.   The  height
       subfield	 gives	the  height  of the character (upwards is
       positive); if a character does not extend above the  base-
       line, it should be given a zero height, rather than a neg-
       ative height.  The depth subfield gives the depth  of  the
       character,  that	 is,  the distance below the lowest point
       below the baseline to which the character  extends  (down-
       wards  is  positive); if a character does not extend below
       above the baseline, it  should  be  given  a  zero  depth,
       rather  than a negative depth.  The italic_correction sub-
       field gives the amount of space that should be added after
       the  character  when it is immediately to be followed by a
       character from a roman font.   The  left_italic_correction
       subfield	 gives	the  amount of space that should be added
       before the character when it is immediately to be preceded
       by  a  character from a roman font.  The subscript_correc-
       tion gives the amount of space that should be added  after
       a  character  before  adding  a subscript.  This should be
       less than the italic correction.

       A line in the charset section can also have the format

	      name "

       This indicates that name is  just  another  name	 for  the
       character mentioned in the preceding line.

       The  word  kernpairs  starts  the kernpairs section.  This
       contains a sequence of lines of the form:

	      c1 c2 n

       This means that when character c1 appears next to  charac-
       ter  c2	the  space between them should be increased by n.
       Most entries in kernpairs section  will	have  a	 negative
       value for n.

FILES
       /usr/share/groff_font/devname/DESC
	      Device description file for device name.

       /usr/share/groff_font/devname/F
	      Font file for font F of device name.

SEE ALSO
       groff_out(5), troff(1).

Groff Version 1.15	 5 December 1995			4

[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server BSDOS

List of man pages available for BSDOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net