XDrawArc man page on BSDOS

Man page or keyword search:  
man Server   6284 pages
apropos Keyword Search (all sections)
Output format
BSDOS logo
[printable version]



XDrawArc(3X11)		XLIB FUNCTIONS	   XDrawArc(3X11)

NAME
       XDrawArc, XDrawArcs, XArc - draw arcs and arc structure

SYNTAX
       XDrawArc(display, d, gc, x, y, width, height, angle1,
       angle2)
	     Display *display;
	     Drawable d;
	     GC gc;
	     int x, y;
	     unsigned int width, height;
	     int angle1, angle2;

       XDrawArcs(display, d, gc, arcs, narcs)
	     Display *display;
	     Drawable d;
	     GC gc;
	     XArc *arcs;
	     int narcs;

ARGUMENTS
       angle1	Specifies the start of the arc relative to the
		 three-o'clock position from the center, in units
		 of degrees * 64.

       angle2	Specifies the path and extent of the arc rela-
		 tive to the start of the arc, in units of
		 degrees * 64.

       arcs	Specifies an array of arcs.

       d	 Specifies the drawable.

       display	Specifies the connection to the X server.

       gc	Specifies the GC.

       narcs	Specifies the number of arcs in the array.

       width
       height	Specify the width and height, which are the
		 major and minor axes of the arc.

       x
       y	 Specify the x and y coordinates, which are rela-
		 tive to the origin of the drawable and specify
		 the upper-left corner of the bounding rectangle.

DESCRIPTION
       XDrawArc draws a single circular or elliptical arc, and
       XDrawArcs draws multiple circular or elliptical arcs.
       Each arc is specified by a rectangle and two angles.  The
       center of the circle or ellipse is the center of the rect-
       angle, and the major and minor axes are specified by the

X Version 11		Release 6.4				1

XDrawArc(3X11)		XLIB FUNCTIONS	   XDrawArc(3X11)

       width and height.  Positive angles indicate counterclock-
       wise motion, and negative angles indicate clockwise
       motion.	If the magnitude of angle2 is greater than 360
       degrees, XDrawArc or XDrawArcs truncates it to 360
       degrees.

       For an arc specified as [x,y,width,height,angle1,angle2],
       the origin of the major and minor axes is at
       [x+_____,y+______], and the infinitely thin path describ-
       ing the entire circle or ellipse intersects the horizontal
       axis at [x,y+______] and [x+width,y+______] and intersects
       the vertical axis at [x+_____,y] and [x+_____,y+height].
       These coordinates can be fractional and so are not trun-
       cated to discrete coordinates.  The path should be defined
       by the ideal mathematical path.	For a wide line with
       line-width lw, the bounding outlines for filling are given
       by the two infinitely thin paths consisting of all points
       whose perpendicular distance from the path of the cir-
       cle/ellipse is equal to lw/2 (which may be a fractional
       value).	The cap-style and join-style are applied the same
       as for a line corresponding to the tangent of the cir-
       cle/ellipse at the endpoint.

       For an arc specified as [x,y,width,height,angle1,angle2],
       the angles must be specified in the effectively skewed
       coordinate system of the ellipse (for a circle, the angles
       and coordinate systems are identical).  The relationship
       between these angles and angles expressed in the normal
       coordinate system of the screen (as measured with a pro-
       tractor) is as follows:

       skewed-angle=atan(tan(normal-angle)*______)+adjust

       The skewed-angle and normal-angle are expressed in radians
       (rather than in degrees scaled by 64) in the range [0,2n]
       and where atan returns a value in the range [-_,_] and
       adjust is:

       0	 for normal-angle in the range [0,_]
       n	 for normal-angle in the range [_,__]
       2n	for normal-angle in the range [__,2n]

       For any given arc, XDrawArc and XDrawArcs do not draw a
       pixel more than once.  If two arcs join correctly and if
       the line-width is greater than zero and the arcs inter-
       sect, XDrawArc and XDrawArcs do not draw a pixel more than
       once.  Otherwise, the intersecting pixels of intersecting
       arcs are drawn multiple times.  Specifying an arc with one
       endpoint and a clockwise extent draws the same pixels as
       specifying the other endpoint and an equivalent counter-
       clockwise extent, except as it affects joins.

       If the last point in one arc coincides with the first
       point in the following arc, the two arcs will join

X Version 11		Release 6.4				2

XDrawArc(3X11)		XLIB FUNCTIONS	   XDrawArc(3X11)

       correctly.  If the first point in the first arc coincides
       with the last point in the last arc, the two arcs will
       join correctly.	By specifying one axis to be zero, a hor-
       izontal or vertical line can be drawn.  Angles are com-
       puted based solely on the coordinate system and ignore the
       aspect ratio.

       Both functions use these GC components: function, plane-
       mask, line-width, line-style, cap-style, join-style, fill-
       style, subwindow-mode, clip-x-origin, clip-y-origin, and
       clip-mask.  They also use these GC mode-dependent compo-
       nents: foreground, background, tile, stipple, tile-stip-
       ple-x-origin, tile-stipple-y-origin, dash-offset, and
       dash-list.

       XDrawArc and XDrawArcs can generate BadDrawable, BadGC,
       and BadMatch errors.

STRUCTURES
       The XArc structure contains:

       typedef struct {
	    short x, y;
	    unsigned short width, height;
	    short angle1, angle2;	     /* Degrees * 64 */
       } XArc;

       All x and y members are signed integers. The width and
       height members are 16-bit unsigned integers.  You should
       be careful not to generate coordinates and sizes out of
       the 16-bit ranges, because the protocol only has 16-bit
       fields for these values.

DIAGNOSTICS
       BadDrawable
		 A value for a Drawable argument does not name a
		 defined Window or Pixmap.

       BadGC	A value for a GContext argument does not name a
		 defined GContext.

       BadMatch An InputOnly window is used as a Drawable.

       BadMatch Some argument or pair of arguments has the cor-
		 rect type and range but fails to match in some
		 other way required by the request.

SEE ALSO
       XDrawLine(3X11), XDrawPoint(3X11), XDrawRectangle(3X11)
       Xlib - C Language X Interface

X Version 11		Release 6.4				3

[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server BSDOS

List of man pages available for BSDOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net